summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/topic_miami.h149
-rw-r--r--include/configs/topic_miamiplus.h2
2 files changed, 151 insertions, 0 deletions
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
new file mode 100644
index 0000000..3b0fa29
--- /dev/null
+++ b/include/configs/topic_miami.h
@@ -0,0 +1,149 @@
+/*
+ * (C) Copyright 2014 Topic Embedded Products
+ *
+ * Configuration for Zynq Evaluation and Development Board - Miami
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_TOPIC_MIAMI_H
+#define __CONFIG_TOPIC_MIAMI_H
+
+#define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL
+
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_I2C1
+
+/* Speed up boot time by ignoring the environment which we never used */
+#define CONFIG_ENV_IS_NOWHERE
+
+#include "zynq-common.h"
+
+/* Fixup settings */
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_SIZE 0x8000
+#undef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_OFFSET 0x80000
+
+/* SPL settings */
+#undef CONFIG_SPL_ETH_SUPPORT
+#undef CONFIG_SYS_SPI_U_BOOT_OFFS
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#undef CONFIG_SPL_MAX_FOOTPRINT
+#define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+
+/* sspi command isn't useful */
+#undef CONFIG_CMD_SPI
+
+/* No useful gpio */
+#undef CONFIG_ZYNQ_GPIO
+#undef CONFIG_CMD_GPIO
+
+/* No falcon support */
+#undef CONFIG_SPL_OS_BOOT
+#undef CONFIG_SPL_FPGA_SUPPORT
+
+/* FPGA commands that we don't use */
+#undef CONFIG_CMD_FPGA_LOADMK
+#undef CONFIG_CMD_FPGA_LOADP
+#undef CONFIG_CMD_FPGA_LOADBP
+#undef CONFIG_CMD_FPGA_LOADFS
+
+/* Extras */
+#define CONFIG_CMD_MEMTEST
+#undef CONFIG_SYS_MEMTEST_START
+#define CONFIG_SYS_MEMTEST_START 0
+#undef CONFIG_SYS_MEMTEST_END
+#define CONFIG_SYS_MEMTEST_END 0x18000000
+
+/* Faster flash, ours may run at 108 MHz */
+#undef CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SF_DEFAULT_SPEED 108000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#undef CONFIG_SF_DUAL_FLASH
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#undef CONFIG_SPI_FLASH_WINBOND
+#undef CONFIG_SPI_FLASH_ISSI
+
+/* Setup proper boot sequences for Miami boards */
+
+#if defined(CONFIG_USB)
+# define EXTRA_ENV_USB \
+ "usbreset=i2c dev 1 && i2c mw 41 1 ff && i2c mw 41 3 fe && "\
+ "i2c mw 41 1 fe && i2c mw 41 1 ff\0" \
+ "usbboot=run usbreset && if usb start; then " \
+ "echo Booting from USB... && " \
+ "if load usb 0 0x1900000 ${bootscript}; then "\
+ "source 0x1900000; fi; " \
+ "load usb 0 ${kernel_addr} ${kernel_image} && " \
+ "load usb 0 ${devicetree_addr} ${devicetree_image} && " \
+ "load usb 0 ${ramdisk_load_address} ${ramdisk_image} && " \
+ "bootm ${kernel_addr} ${ramdisk_load_address} "\
+ "${devicetree_addr}; " \
+ "fi\0"
+ /* Note that addresses here should match the addresses in the env */
+# undef DFU_ALT_INFO
+# define DFU_ALT_INFO \
+ "dfu_alt_info=" \
+ "uImage ram 0x2080000 0x500000;" \
+ "devicetree.dtb ram 0x2000000 0x20000;" \
+ "uramdisk.image.gz ram 0x4000000 0x10000000\0" \
+ "dfu_ram=run usbreset && dfu 0 ram 0\0" \
+ "thor_ram=run usbreset && thordown 0 ram 0\0"
+#else
+# define EXTRA_ENV_USB
+#endif
+
+#undef CONFIG_PREBOOT
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_image=uImage\0" \
+ "kernel_addr=0x2080000\0" \
+ "ramdisk_image=uramdisk.image.gz\0" \
+ "ramdisk_load_address=0x4000000\0" \
+ "devicetree_image=devicetree.dtb\0" \
+ "devicetree_addr=0x2000000\0" \
+ "bitstream_image=fpga.bin\0" \
+ "bootscript=autorun.scr\0" \
+ "loadbit_addr=0x100000\0" \
+ "loadbootenv_addr=0x2000000\0" \
+ "kernel_size=0x400000\0" \
+ "devicetree_size=0x10000\0" \
+ "boot_size=0xF00000\0" \
+ "fdt_high=0x20000000\0" \
+ "initrd_high=0x20000000\0" \
+ "mmc_loadbit=echo Loading bitstream from SD/MMC/eMMC to RAM.. && " \
+ "mmcinfo && " \
+ "load mmc 0 ${loadbit_addr} ${bitstream_image} && " \
+ "fpga load 0 ${loadbit_addr} ${filesize}\0" \
+ "qspiboot=echo Booting from QSPI flash... && " \
+ "sf probe && " \
+ "sf read ${devicetree_addr} 0xA0000 ${devicetree_size} && " \
+ "sf read ${kernel_addr} 0xC0000 ${kernel_size} && " \
+ "bootm ${kernel_addr} - ${devicetree_addr}\0" \
+ "sdboot=if mmcinfo; then " \
+ "setenv bootargs console=ttyPS0,115200 " \
+ "root=/dev/mmcblk0p2 rw rootfstype=ext4 " \
+ "rootwait quiet ; " \
+ "load mmc 0 ${kernel_addr} ${kernel_image}&& " \
+ "load mmc 0 ${devicetree_addr} ${devicetree_image}&& " \
+ "bootm ${kernel_addr} - ${devicetree_addr}; " \
+ "fi\0" \
+ EXTRA_ENV_USB \
+ DFU_ALT_INFO
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "if mmcinfo; then " \
+ "if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; " \
+ "fi; fi; run $modeboot"
+#undef CONFIG_DISPLAY_BOARDINFO
+
+/* Further tweaks to reduce image size */
+#undef CONFIG_CMD_BOOTZ
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_AES
+
+#endif /* __CONFIG_TOPIC_MIAMI_H */
diff --git a/include/configs/topic_miamiplus.h b/include/configs/topic_miamiplus.h
new file mode 100644
index 0000000..46ca6bd
--- /dev/null
+++ b/include/configs/topic_miamiplus.h
@@ -0,0 +1,2 @@
+#include "topic_miami.h"
+#define CONFIG_SF_DUAL_FLASH