diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/AP1000.h | 1 | ||||
| -rw-r--r-- | include/configs/DASA_SIM.h | 1 | ||||
| -rw-r--r-- | include/configs/ML2.h | 1 | ||||
| -rw-r--r-- | include/configs/MOUSSE.h | 1 | ||||
| -rw-r--r-- | include/configs/MVSMR.h | 1 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 26 | ||||
| -rw-r--r-- | include/configs/charon.h | 80 | ||||
| -rw-r--r-- | include/configs/da850evm.h | 29 | ||||
| -rw-r--r-- | include/configs/ea20.h | 192 | ||||
| -rw-r--r-- | include/configs/hawkboard.h | 206 | ||||
| -rw-r--r-- | include/configs/inka4x0.h | 1 | ||||
| -rw-r--r-- | include/configs/omap3_beagle.h | 2 | ||||
| -rw-r--r-- | include/configs/omap4_sdp4430.h | 1 | ||||
| -rw-r--r-- | include/configs/rsdproto.h | 1 | ||||
| -rw-r--r-- | include/configs/uc101.h | 1 |
15 files changed, 535 insertions, 9 deletions
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index ffaab79..37dd757 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -33,6 +33,7 @@ * run from RAM instead of Flash. */ #define CONFIG_SYS_TEXT_BASE 0x08000000 +#define CONFIG_SYS_LDSCRIPT "board/amirix/ap1000/u-boot.lds" #define CONFIG_PCI 1 diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index 3706071..53229d9 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -37,6 +37,7 @@ #define CONFIG_DASA_SIM 1 /* ...on a DASA_SIM board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 +#define CONFIG_SYS_LDSCRIPT "board/esd/dasa_sim/u-boot.lds" #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ diff --git a/include/configs/ML2.h b/include/configs/ML2.h index 1e96b9e..4df9f4c 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -31,6 +31,7 @@ #define CONFIG_ML2 1 /* ...on a ML2 board */ #define CONFIG_SYS_TEXT_BASE 0x18000000 +#define CONFIG_SYS_LDSCRIPT "board/ml2/u-boot.lds" #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 9529c87..c809a6b 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -50,6 +50,7 @@ #define CONFIG_MOUSSE 1 #define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#define CONFIG_SYS_LDSCRIPT "board/mousse/u-boot.lds" #define CONFIG_SYS_ADDR_MAP_B 1 diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index f7fd9b2..f94ad5c 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -35,6 +35,7 @@ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFF800000 #endif +#define CONFIG_SYS_LDSCRIPT "board/matrix_vision/mvsmr/u-boot.lds" #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index c2f6b8a..e822a59 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -49,7 +49,8 @@ #endif /* On a Cameron or on a FO300 board or ... */ -#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \ + && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -79,7 +80,7 @@ /* switch is open */ #endif /* CONFIG_FO300 */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ #define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ @@ -92,7 +93,7 @@ * 0x40000000 - 0x4fffffff - PCI Memory * 0x50000000 - 0x50ffffff - PCI IO Space */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ @@ -140,7 +141,8 @@ #define CONFIG_ISO_PARTITION /* USB */ -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_STK52XX) #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_OHCI_BE_CONTROLLER #define CONFIG_USB_STORAGE @@ -204,13 +206,15 @@ #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #endif -#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) #define CONFIG_CMD_IDE #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #endif -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_STK52XX) #define CONFIG_CFG_USB #define CONFIG_CFG_FAT #endif @@ -291,7 +295,9 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ "console=${console},${baudrate}\0" \ - "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "flash_self_old=sete console ttyS0; " \ + "run ramargs addip addcons addmtd; " \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ @@ -303,7 +309,7 @@ "sete console ttyS0; run nfsargs addip addcons;bootm\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcons; " \ + "run nfsargs addip addcons addmtd; " \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ @@ -420,7 +426,7 @@ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nor0=TQM5200-0" -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) # if defined(CONFIG_TQM5200_B) # if defined(CONFIG_SYS_LOWBOOT) # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ @@ -566,6 +572,7 @@ * use PSC1: Bits 29-31 (mask: 0x00000007): * 100 -> UART (on all boards). */ +#if !defined(CONFIG_SYS_GPS_PORT_CONFIG) #if defined (CONFIG_MINIFAP) # define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 #elif defined (CONFIG_STK52XX) @@ -585,6 +592,7 @@ #else /* TMQ5200 Inbetriebnahme-Board */ # define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 #endif +#endif /* * RTC configuration diff --git a/include/configs/charon.h b/include/configs/charon.h new file mode 100644 index 0000000..80a273c --- /dev/null +++ b/include/configs/charon.h @@ -0,0 +1,80 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2006 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_CHARON_H +#define __CONFIG_CHARON_H + +#define CONFIG_CHARON +#define CONFIG_HOSTNAME charon + +#define CONFIG_SYS_GPS_PORT_CONFIG 0x81550414 + +/* include common defines/options for TQM52xx boards */ +#include "TQM5200.h" + +/* defines special on charon board */ +#undef CONFIG_RTC_MPC5200 +#undef CONFIG_CMD_DATE + +#undef CUSTOM_ENV_SETTINGS +#define CUSTOM_ENV_SETTINGS \ + "bootfile=/tftpboot/charon/uImage\0" \ + "fdt_file=/tftpboot/charon/charon.dtb\0" \ + "u-boot=/tftpboot/charon/u-boot.bin\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" + + +/* additional features on charon board */ +#define CONFIG_RESET_PHY_R + +/* + * I2C configuration + */ +#define CONFIG_I2C_MULTI_BUS + +#define CONFIG_SYS_TFP410_ADDR 0x38 +#define CONFIG_SYS_TFP410_BUS 0 + +/* + * FPGA configuration + */ +#define CONFIG_SYS_CS3_START 0xE8000000 +#define CONFIG_SYS_CS3_SIZE 0x80000 /* 512 KByte */ + +/* + * CS3 Config Register Init: + * CS3 Enabled + * AddrBus: 8bits + * DataBus: 4bytes + * Multiplexed: Yes + * MuxBank: 00 + */ +#define CONFIG_SYS_CS3_CFG 0x00009310 + +#endif /* __CONFIG_CHARON_H */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 4224258..bbb5a9b 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -27,6 +27,7 @@ * Board */ #define CONFIG_DRIVER_TI_EMAC +#define CONFIG_USE_SPIFLASH /* * SoC Configuration @@ -71,6 +72,15 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + /* * I2C Configuration */ @@ -78,6 +88,7 @@ #define CONFIG_DRIVER_DAVINCI_I2C #define CONFIG_SYS_I2C_SPEED 25000 #define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 /* * Flash & Environment @@ -115,6 +126,16 @@ #define CONFIG_NET_MULTI #endif +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_SECT_SIZE (64 << 10) +#define CONFIG_SYS_NO_FLASH +#endif + /* * U-Boot general configuration */ @@ -179,6 +200,14 @@ #define CONFIG_CMD_UBIFS #endif +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SAVEENV +#endif + #if !defined(CONFIG_USE_NAND) && \ !defined(CONFIG_USE_NOR) && \ !defined(CONFIG_USE_SPIFLASH) diff --git a/include/configs/ea20.h b/include/configs/ea20.h new file mode 100644 index 0000000..48ce945 --- /dev/null +++ b/include/configs/ea20.h @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_USE_SPIFLASH +#define CONFIG_DRIVER_TI_EMAC_USE_RMII + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_DA850_EVM +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0xc1080000 + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +/* + * Network & Ethernet Configuration + */ +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 0 +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (8 << 10) +#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_SECT_SIZE (64 << 10) +#define CONFIG_SYS_NO_FLASH +#endif + +/* + * U-Boot general configuration + */ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "ea20 > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#ifdef CONFIG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND + +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_LZO +#define CONFIG_RBTREE +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SAVEENV +#endif + +#if !defined(CONFIG_USE_NAND) && \ + !defined(CONFIG_USE_NOR) && \ + !defined(CONFIG_USE_SPIFLASH) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ENV +#endif + +/* additions for new relocation code, must added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) +#endif /* __CONFIG_H */ diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h new file mode 100644 index 0000000..23a88d0 --- /dev/null +++ b/include/configs/hawkboard.h @@ -0,0 +1,206 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_SYS_USE_NAND 1 + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_HAWK +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_UART_U_BOOT) +#define CONFIG_SYS_TEXT_BASE 0xc1080000 +#else +#define CONFIG_SYS_TEXT_BASE 0xc1180000 +#endif + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE +#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\ + GENERATED_GBL_DATA_SIZE) + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Network & Ethernet Configuration + */ +#define CONFIG_EMAC_MDIO_PHY_NUM 0x7 +#if !defined(CONFIG_NAND_SPL) +#define CONFIG_DRIVER_TI_EMAC +#endif +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI + +/* + * Nand Flash + */ +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_CLE_MASK 0x10 +#define CONFIG_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CFG_DAVINCI_STD_NAND_LAYOUT +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, } +#define NAND_MAX_CHIPS 1 +/* Block 0--not used by bootcode */ +#define CONFIG_ENV_OFFSET 0x0 + +#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ + CONFIG_SYS_NAND_U_BOOT_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#endif /* CONFIG_SYS_USE_NAND */ + +/* + * U-Boot general configuration + */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,"\ + "4M ip=static" +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifdef CONFIG_SYS_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#endif + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 9b116e6..b19d544 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -44,6 +44,7 @@ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFE00000 /* Standard: boot low */ #endif +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds" #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 56363f7..5cfa4cb 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -335,4 +335,6 @@ extern unsigned int boot_flash_type; CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) +#define CONFIG_OMAP3_SPI + #endif /* __CONFIG_H */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index d288333..9a8bb73 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -102,6 +102,7 @@ /* TWL6030 */ #define CONFIG_TWL6030_POWER 1 +#define CONFIG_CMD_BAT 1 /* MMC */ #define CONFIG_GENERIC_MMC 1 diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 5761f20..2ed189e 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -40,6 +40,7 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_SYS_TEXT_BASE 0xff000000 +#define CONFIG_SYS_LDSCRIPT "board/rsdproto/u-boot.lds" #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 483534c..f136691 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -35,6 +35,7 @@ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF00000 #endif +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds" #include "manroland/common.h" #include "manroland/mpc5200-common.h" |