diff options
Diffstat (limited to 'include/configs')
41 files changed, 2200 insertions, 403 deletions
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 5722544..bfbb06c 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -246,7 +246,8 @@ /* * Configuration for environment - * Environment is embedded in u-boot in the second sector of the flash + * Environment is not embedded in u-boot. First time runing may have env + * crc error warning if there is no correct environment on the flash. */ #ifdef CONFIG_CF_SBF # define CONFIG_ENV_IS_IN_SPI_FLASH @@ -261,6 +262,7 @@ */ #ifdef CONFIG_SYS_STMICRO_BOOT # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE # define CONFIG_ENV_OFFSET 0x30000 # define CONFIG_ENV_SIZE 0x1000 # define CONFIG_ENV_SECT_SIZE 0x10000 @@ -268,7 +270,7 @@ #ifdef CONFIG_SYS_SPANSION_BOOT # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) # define CONFIG_ENV_SIZE 0x1000 # define CONFIG_ENV_SECT_SIZE 0x8000 #endif diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 3b52025..911560c 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -45,6 +45,8 @@ #define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + #define CONFIG_BOARD_TYPES 1 /* support board types */ #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index b471c9b..26a3c96 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -32,6 +32,7 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 * 1024)) #define CONFIG_SYS_PROMPT "AM335X# " #define CONFIG_SYS_NO_FLASH +#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM #define CONFIG_CMD_ASKENV diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h new file mode 100644 index 0000000..a21d448 --- /dev/null +++ b/include/configs/cam_enc_4xx.h @@ -0,0 +1,453 @@ +/* + * Copyright (C) 2009 Texas Instruments Incorporated + * + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* SoC Configuration */ +#define CONFIG_ARM926EJS /* arm926ejs CPU */ +#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM365 + +#define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM + +#define CONFIG_HOSTNAME cam_enc_4xx + +#define BOARD_LATE_INIT +#define CONFIG_CAM_ENC_LED_MASK 0x0fc00000 + +/* Memory Info */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MiB */ +#define DDR_4BANKS /* 4-bank DDR2 (256MB) */ +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Serial Driver info: UART0 for console */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 0x01c20000 +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Network Configuration */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 0 +#define CONFIG_SYS_EMAC_TI_CLKDIV 0xa9 /* 1MHz */ +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_CMD_MII +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_RESET_PHY_R + +/* I2C */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 0x10 /* SMBus host address */ + +/* NAND: socketed, two chipselects, normally 2 GBytes */ +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_PAGE_2K + +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } +/* socket has two chipselects, nCE0 gated by address BIT(14) */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +/* SPI support */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CONFIG_SYS_SPI_CLK davinci_clk_get(SPI_PLLDIV) +#define CONFIG_SF_DEFAULT_SPEED 3000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_CMD_SF + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DAVINCI_MMC +#define CONFIG_MMC_MBLOCK + +/* U-Boot command configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES + +#ifdef CONFIG_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#endif + +#ifdef CONFIG_NAND_DAVINCI +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_NAND +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#endif + +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* U-Boot general configuration */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "cam_enc_4xx> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP + +#ifdef CONFIG_NAND_DAVINCI +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x0 +#undef CONFIG_ENV_IS_IN_FLASH +#endif + +#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) +#define CONFIG_CMD_ENV +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ +#define CONFIG_ENV_IS_IN_MMC +#undef CONFIG_ENV_IS_IN_FLASH +#endif + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE +#define CONFIG_TIMESTAMP + +/* U-Boot memory configuration */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 /* physical address */ +#define CONFIG_SYS_MEMTEST_END 0x81000000 /* test 16MB RAM */ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ +#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ + +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" + +#ifdef CONFIG_SYS_NAND_LARGEPAGE +/* Use same layout for 128K/256K blocks; allow some bad blocks */ +#define PART_BOOT "2m(bootloader)ro," +#endif + +#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ +#define PART_REST "-(filesystem)" + +#define MTDPARTS_DEFAULT \ + "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST + +#define CONFIG_SYS_NAND_PAGE_SIZE (0x800) +#define CONFIG_SYS_NAND_BLOCK_SIZE (0x20000) + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_LOAD +#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POST_MEM_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(BOARDDIR)/u-boot-spl.lds" +#define CONFIG_SPL_STACK (0x00010000 + 0x7f00) + +#define CONFIG_SPL_TEXT_BASE 0x0000020 /*CONFIG_SYS_SRAM_START*/ +#define CONFIG_SPL_MAX_SIZE 12320 + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SYS_TEXT_BASE 0x81080000 +#endif + +#define CONFIG_SYS_NAND_BASE 0x02000000 +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) + +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 0x200 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (40) + +/* + * RBL searches from Block n (n = 1..24) + * so we can define, how many UBL Headers + * we can write before the real spl code + */ +#define CONFIG_SYS_NROF_UBL_HEADER 5 +#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6 + +#define CONFIG_SYS_NAND_U_BOOT_DST 0x81080000 /* u-boot TEXT_BASE */ +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST + +/* + * Post tests for memory testing + */ +#define CONFIG_POST CONFIG_SYS_POST_MEMORY +#define _POST_WORD_ADDR 0x0 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xc0000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 + +/* + * U-Boot is a 3rd stage loader and if booting with spl, cpu setup is + * done in board_init_f from c code. + */ +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* for UBL header */ +#define CONFIG_SYS_UBL_BLOCK (CONFIG_SYS_NAND_PAGE_SIZE) + +#define CONFIG_SYS_DM36x_PLL1_PLLM 0x55 +#define CONFIG_SYS_DM36x_PLL1_PREDIV 0x8005 +#define CONFIG_SYS_DM36x_PLL2_PLLM 0x09 +#define CONFIG_SYS_DM36x_PLL2_PREDIV 0x8000 +#define CONFIG_SYS_DM36x_PERI_CLK_CTRL 0x243F04FC +#define CONFIG_SYS_DM36x_PLL1_PLLDIV1 0x801b +#define CONFIG_SYS_DM36x_PLL1_PLLDIV2 0x8001 +/* POST DIV 680/2 = 340Mhz -> MJCP and HDVICP bus interface clock */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV3 0x8001 +/* + * POST DIV 680/4 = 170Mhz -> EDMA/Peripheral CFG0(1/2 MJCP/HDVICP bus + * interface clk) + */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV4 0x8003 +/* POST DIV 680/2 = 340Mhz -> VPSS */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV5 0x8001 +/* POST DIV 680/9 = 75.6 Mhz -> VENC */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV6 0x8008 +/* + * POST DIV 680/1 = 680Mhz -> DDRx2(with internal divider of 2, clock boils + * down to 340 Mhz) + */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV7 0x8000 +/* POST DIV 680/7= 97Mhz-> MMC0/SD0 */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV8 0x8006 +/* POST DIV 680/28 = 24.3Mhz-> CLKOUT */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV9 0x801b + +#define CONFIG_SYS_DM36x_PLL2_PLLDIV1 0x8011 +/* POST DIV 432/1=432 Mhz -> ARM926/(HDVICP block) clk */ +#define CONFIG_SYS_DM36x_PLL2_PLLDIV2 0x8000 +#define CONFIG_SYS_DM36x_PLL2_PLLDIV3 0x8001 +/* POST DIV 432/21= 20.5714 Mhz->VOICE Codec clk */ +#define CONFIG_SYS_DM36x_PLL2_PLLDIV4 0x8014 +/* POST DIV 432/16=27 Mhz -> VENC(For SD modes, requires) */ +#define CONFIG_SYS_DM36x_PLL2_PLLDIV5 0x800f + +/* + * READ LATENCY 7 (CL + 2) + * CONFIG_PWRDNEN = 1 + * CONFIG_EXT_STRBEN = 1 + */ +#define CONFIG_SYS_DM36x_DDR2_DDRPHYCR (0 \ + | DV_DDR_PHY_EXT_STRBEN \ + | DV_DDR_PHY_PWRDNEN \ + | (7 << DV_DDR_PHY_RD_LATENCY_SHIFT)) + +/* + * T_RFC = (trfc/DDR_CLK) - 1 = (195 / 2.941) - 1 + * T_RP = (trp/DDR_CLK) - 1 = (12.5 / 2.941) - 1 + * T_RCD = (trcd/DDR_CLK) - 1 = (12.5 / 2.941) - 1 + * T_WR = (twr/DDR_CLK) - 1 = (15 / 2.941) - 1 + * T_RAS = (tras/DDR_CLK) - 1 = (45 / 2.941) - 1 + * T_RC = (trc/DDR_CLK) - 1 = (57.5 / 2.941) - 1 + * T_RRD = (trrd/DDR_CLK) - 1 = (7.5 / 2.941) - 1 + * T_WTR = (twtr/DDR_CLK) - 1 = (7.5 / 2.941) - 1 + */ +#define CONFIG_SYS_DM36x_DDR2_SDTIMR (0 \ + | (66 << DV_DDR_SDTMR1_RFC_SHIFT) \ + | (4 << DV_DDR_SDTMR1_RP_SHIFT) \ + | (4 << DV_DDR_SDTMR1_RCD_SHIFT) \ + | (5 << DV_DDR_SDTMR1_WR_SHIFT) \ + | (14 << DV_DDR_SDTMR1_RAS_SHIFT) \ + | (19 << DV_DDR_SDTMR1_RC_SHIFT) \ + | (2 << DV_DDR_SDTMR1_RRD_SHIFT) \ + | (2 << DV_DDR_SDTMR1_WTR_SHIFT)) + +/* + * T_RASMAX = (trasmax/refresh_rate) - 1 = (70K / 7812.6) - 1 + * T_XP = tCKE - 1 = 3 - 2 + * T_XSNR= ((trfc + 10)/DDR_CLK) - 1 = (205 / 2.941) - 1 + * T_XSRD = txsrd - 1 = 200 - 1 + * T_RTP = (trtp/DDR_CLK) - 1 = (7.5 / 2.941) - 1 + * T_CKE = tcke - 1 = 3 - 1 + */ +#define CONFIG_SYS_DM36x_DDR2_SDTIMR2 (0 \ + | (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) \ + | (2 << DV_DDR_SDTMR2_XP_SHIFT) \ + | (69 << DV_DDR_SDTMR2_XSNR_SHIFT) \ + | (199 << DV_DDR_SDTMR2_XSRD_SHIFT) \ + | (2 << DV_DDR_SDTMR2_RTP_SHIFT) \ + | (2 << DV_DDR_SDTMR2_CKE_SHIFT)) + +/* PR_OLD_COUNT = 0xfe */ +#define CONFIG_SYS_DM36x_DDR2_PBBPR 0x000000FE +/* refresh rate = 0x768 */ +#define CONFIG_SYS_DM36x_DDR2_SDRCR 0x00000768 + +#define CONFIG_SYS_DM36x_DDR2_SDBCR (0 \ + | (2 << DV_DDR_SDCR_PAGESIZE_SHIFT) \ + | (3 << DV_DDR_SDCR_IBANK_SHIFT) \ + | (5 << DV_DDR_SDCR_CL_SHIFT) \ + | (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) \ + | (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) \ + | (1 << DV_DDR_SDCR_DDREN_SHIFT) \ + | (0 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) \ + | (1 << DV_DDR_SDCR_DDR2EN_SHIFT) \ + | (1 << DV_DDR_SDCR_DDR_DDQS_SHIFT) \ + | (1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT)) + +#define CONFIG_SYS_DM36x_AWCCR 0xff +#define CONFIG_SYS_DM36x_AB1CR 0x40400204 +#define CONFIG_SYS_DM36x_AB2CR 0x04ca2650 + +/* All Video Inputs */ +#define CONFIG_SYS_DM36x_PINMUX0 0x00000000 +/* + * All Video Outputs, + * GPIO 86, 87 + 90 0x0000f030 + */ +#define CONFIG_SYS_DM36x_PINMUX1 0x00530002 +#define CONFIG_SYS_DM36x_PINMUX2 0x00001815 +/* + * SPI1, UART1, I2C, SD0, SD1, McBSP0, CLKOUTs + * GPIO 25 0x60000000 + */ +#define CONFIG_SYS_DM36x_PINMUX3 0x9b5affff +/* + * MMC/SD0 instead of MS, SPI0 + * GPIO 34 0x0000c000 + */ +#define CONFIG_SYS_DM36x_PINMUX4 0x00002655 + +/* + * Default environment settings + */ +#define xstr(s) str(s) +#define str(s) #s + +#define DVN4XX_UBOOT_ADDR_R_RAM 0x80000000 +/* (DVN4XX_UBOOT_ADDR_R_RAM + CONFIG_SYS_NAND_PAGE_SIZE) */ +#define DVN4XX_UBOOT_ADDR_R_NAND_SPL 0x80000800 +/* + * (DVN4XX_UBOOT_ADDR_R_NAND_SPL + (CONFIG_SYS_NROF_PAGES_NAND_SPL * \ + * CONFIG_SYS_NAND_PAGE_SIZE)) + */ +#define DVN4XX_UBOOT_ADDR_R_UBOOT 0x80003800 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "u_boot_addr_r=" xstr(DVN4XX_UBOOT_ADDR_R_RAM) "\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.ubl\0" \ + "load=tftp ${u_boot_addr_r} ${uboot}\0" \ + "pagesz=" xstr(CONFIG_SYS_NAND_PAGE_SIZE) "\0" \ + "writeheader=nandrbl rbl;nand erase 80000 ${pagesz};" \ + "nand write ${u_boot_addr_r} 80000 ${pagesz};" \ + "nandrbl uboot\0" \ + "writenand_spl=nandrbl rbl;nand erase a0000 3000;" \ + "nand write " xstr(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \ + " a0000 3000;nandrbl uboot\0" \ + "writeuboot=nandrbl uboot;" \ + "nand erase " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \ + xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) \ + ";nand write " xstr(DVN4XX_UBOOT_ADDR_R_UBOOT) \ + " " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \ + xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \ + "update=run load writenand_spl writeuboot\0" \ + "bootcmd=run bootcmd\0" \ + "rootpath=/opt/eldk-arm/arm\0" \ + "\0" + +/* USB Configuration */ +#define CONFIG_USB_DAVINCI +#define CONFIG_MUSB_HCD +#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN | \ + USBPHY_PHY24MHZ) + +#define CONFIG_CMD_USB /* include support for usb cmd */ +#define CONFIG_USB_STORAGE /* MSC class support */ +#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ +#define CONFIG_CMD_FAT /* inclue support for FAT/storage */ +#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */ + +#undef DAVINCI_DM365EVM +#define PINMUX4_USBDRVBUS_BITCLEAR 0x3000 +#define PINMUX4_USBDRVBUS_BITSET 0x2000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 3a05c82..9baf415 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -32,6 +32,14 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/mach-types.h> +#ifdef MACH_TYPE_OMAP3_CPS +#error "MACH_TYPE_OMAP3_CPS has been defined properly, please remove this." +#else +#define MACH_TYPE_OMAP3_CPS 2751 +#endif +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CPS + /* * High Level Configuration Options */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 201e6b5..74fec3f 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -28,7 +28,12 @@ */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_USE_SPIFLASH +#define CONFIG_SYS_USE_NAND #define CONFIG_DRIVER_TI_EMAC_USE_RMII +#define CONFIG_BOARD_EARLY_INIT_F +#define BOARD_LATE_INIT +#define CONFIG_VIDEO +#define CONFIG_PREBOOT /* * SoC Configuration @@ -47,7 +52,7 @@ /* * Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ @@ -67,7 +72,7 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ @@ -83,6 +88,13 @@ #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED /* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 100000 + +/* * Network & Ethernet Configuration */ #ifdef CONFIG_DRIVER_TI_EMAC @@ -99,11 +111,22 @@ #undef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_OFFSET 0x80000 #define CONFIG_ENV_SECT_SIZE (64 << 10) #define CONFIG_SYS_NO_FLASH #endif + +#if defined(CONFIG_VIDEO) +#define CONFIG_VIDEO_DA8XX +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_CMD_BMP +#endif + /* * U-Boot general configuration */ @@ -143,6 +166,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_I2C #ifndef CONFIG_DRIVER_TI_EMAC #undef CONFIG_CMD_NET @@ -151,7 +175,8 @@ #undef CONFIG_CMD_PING #endif -#ifdef CONFIG_USE_NAND +/* NAND Setup */ +#ifdef CONFIG_SYS_USE_NAND #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND @@ -163,8 +188,20 @@ #define CONFIG_RBTREE #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS + +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#undef CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif +/* SPI Flash */ #ifdef CONFIG_USE_SPIFLASH #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_FLASH @@ -173,7 +210,7 @@ #define CONFIG_CMD_SAVEENV #endif -#if !defined(CONFIG_USE_NAND) && \ +#if !defined(CONFIG_SYS_USE_NAND) && \ !defined(CONFIG_USE_NOR) && \ !defined(CONFIG_USE_SPIFLASH) #define CONFIG_ENV_IS_NOWHERE @@ -187,4 +224,83 @@ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) +/* + * Default environment and default scripts + * to update uboot and load kernel + */ +#define xstr(s) str(s) +#define str(s) #s + + +#define CONFIG_HOSTNAME ea20 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "as=3\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "rfsbargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rfsbpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "mtdids=nand0=davinci_nand.0\0" \ + "mtdparts=mtdparts=davinci_nand.0:8m(Settings),8m(aKernel)," \ + "8m(bKernel),76m(aRootfs),76m(bRootfs),-(MassSD)\0" \ + "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ + "ubi.mtd=${as} root=ubi0:rootfs\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=${consoledev},${baudrate}n8\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ + "consoledev=ttyS0\0" \ + "loadaddr=c0000014\0" \ + "memory=32M\0" \ + "kernel_addr_r=c0700000\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "run nfsargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr_r}\0" \ + "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ + "run rfsbargs addip addtty addmtd addmisc addmem; " \ + "bootm ${kernel_addr_r}\0" \ + "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ + "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "ubifsload ${kernel_addr_r} /boot/uImage;" \ + "ubifsumount; run nandargs addip addtty " \ + "addmtd addmisc addmem;bootm ${kernel_addr_r}\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load_magic=if sf probe 0;then sf " \ + "read c0000000 0x10000 0x60000;fi\0" \ + "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "if ubifsload c0000014 /boot/u-boot.bin;" \ + "then mw c0000008 ${filesize};else echo Error reading " \ + "u-boot from nand!;fi\0" \ + "load_net=if sf probe 0;then sf read c0000000 0x10000 0x60000;" \ + "tftp c0000014 ${u-boot};" \ + "mw c0000008 ${filesize};" \ + "fi\0" \ + "upd=if sf probe 0;then sf erase 10000 60000;" \ + "sf write c0000000 10000 60000;" \ + "fi\0" \ + "ubootupd_net=if run load_net;then echo Updating u-boot;" \ + "if run upd; then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ + "bootcmd=run net_nfs\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 4324172..b08de4a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -41,6 +41,8 @@ #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_EARLY_INIT_F +#define MACH_TYPE_EB_CPUX9K2 1977 +#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 /*--------------------------------------------------------------------------*/ #define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index b507786..a07c8b5 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -132,7 +132,7 @@ #define CONFIG_FSL_PMIC_CLK 25000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX #endif /* diff --git a/include/configs/flea3.h b/include/configs/flea3.h new file mode 100644 index 0000000..d88c578 --- /dev/null +++ b/include/configs/flea3.h @@ -0,0 +1,286 @@ +/* + * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * Configuration for the flea3 board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX35 +#define CONFIG_MX35_HCLK_FREQ 24000000 + +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_DISPLAY_CPUINFO + +/* Only in case the value is not present in mach-types.h */ +#ifndef MACH_TYPE_FLEA3 +#define MACH_TYPE_FLEA3 3668 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3 + +/* Set TEXT at the beginning of the NOR flash */ +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + +#define CONFIG_SYS_64BIT_VSPRINTF + +/* This is required to setup the ESDC controller */ +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) + +/* + * Hardware drivers + */ +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_MX35_PORT3 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#define CONFIG_MXC_SPI +#define CONFIG_MXC_GPIO + +/* + * UART (console) + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX35_UART3 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* + * Command definition + */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_NAND + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_NET_RETRY_COUNT 100 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ + + +/* + * Ethernet on SOC (FEC) + */ +#define CONFIG_NET_MULTI +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_FEC_MXC_PHYADDR 0x1 + +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "flea3 U-Boot > " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD1_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE CSD1_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) + +/* + * MTD Command for mtdparts + */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:196m(root1)," \ + "196m(root2),-(user);" \ + "physmap-flash.0:512k(u-boot),64k(env1)," \ + "64k(env2),3776k(kernel1),3776k(kernel2)" +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) + +#define CONFIG_ENV_IS_IN_FLASH + +/* + * CFI FLASH driver setup + */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER + +/* A non-standard buffered write algorithm */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ +#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ + +/* + * NAND FLASH driver setup + */ +#define CONFIG_NAND_MXC +#define CONFIG_NAND_MXC_V1_1 +#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_LARGEPAGE + +/* + * Default environment and default scripts + * to update uboot and load kernel + */ +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_HOSTNAME flea3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "loadaddr=90800000\0" \ + "kernel_addr_r=90800000\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r}\0" \ + "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ + "net_self=if run net_self_load;then " \ + "run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ + "else echo Images not loades;fi\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \ + "update=protect off ${uboot_addr} +40000;" \ + "erase ${uboot_addr} +40000;" \ + "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ + "upd=if run load;then echo Updating u-boot;if run update;" \ + "then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "bootcmd=run net_nfs\0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 24bf767..9813309 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -32,6 +32,16 @@ #define __CONFIG_GPLUGD_H /* + * FIXME: fix for error caused due to recent update to mach-types.h + */ +#include <asm/mach-types.h> +#ifdef MACH_TYPE_SHEEVAD +#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." +#else +#define MACH_TYPE_SHEEVAD 2625 +#endif + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-gplugD" @@ -42,7 +52,7 @@ #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ #define CONFIG_ARMADA100 1 /* SOC Family Name */ #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ -#define CONFIG_MACH_SHEEVAD /* Machine type */ +#define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_TEXT_BASE 0x00f00000 diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 89e71c0..1455ea2 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -81,7 +81,7 @@ #define CONFIG_FSL_PMIC_CLK 1000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index f4bfee4..1b75197 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -30,25 +30,18 @@ #include <asm/arch/imx-regs.h> - /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +/* High Level Configuration Options */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 /* in a mx31 */ #define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -/* Temporarily disabled */ -#if 0 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 -#endif - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* * Size of malloc() pool @@ -59,14 +52,14 @@ * Hardware drivers */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MXC 1 -#define CONFIG_SYS_I2C_MX31_PORT2 1 +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_MX31_PORT2 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0xfe -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX31_UART1 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -86,42 +79,60 @@ #define CONFIG_BOOTDELAY 3 -#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" +#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro," \ + "1536k(kernel),-(root)" #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.23.168 #define CONFIG_SERVERIP 192.168.23.2 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2 rootfstype=jffs2" \ - "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 $(uimage); bootm\0" \ - "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; bootm 0x80000000\0" \ - "unlock=yes\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "prg_uboot=tftpboot 0x80000000 $(uboot); protect off 0xa0000000 +0x20000; erase 0xa0000000 +0x20000; cp.b 0x80000000 0xa0000000 $(filesize)\0" \ - "prg_kernel=tftpboot 0x80000000 $(uimage); erase 0xa0040000 +0x180000; cp.b 0x80000000 0xa0040000 $(filesize)\0" \ - "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0" \ - "videomode=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:1241513985,vmode:0\0" - - -#define CONFIG_SMC911X 1 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootargs_flash=setenv bootargs $(bootargs) " \ + "root=/dev/mtdblock2 rootfstype=jffs2\0" \ + "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;" \ + "tftpboot 0x80000000 $(uimage);bootm\0" \ + "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;" \ + "bootm 0x80000000\0" \ + "unlock=yes\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "prg_uboot=tftpboot 0x80000000 $(uboot);" \ + "protect off 0xa0000000 +0x20000;" \ + "erase 0xa0000000 +0x20000;" \ + "cp.b 0x80000000 0xa0000000 $(filesize)\0" \ + "prg_kernel=tftpboot 0x80000000 $(uimage);" \ + "erase 0xa0040000 +0x180000;" \ + "cp.b 0x80000000 0xa0040000 $(filesize)\0" \ + "prg_jffs2=tftpboot 0x80000000 $(jffs2);" \ + "erase 0xa01c0000 0xa1ffffff;" \ + "cp.b 0x80000000 0xa01c0000 $(filesize)\0" \ + "videomode=video=ctfb:x:240,y:320,depth:16,mode:0," \ + "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \ + "sync:1241513985,vmode:0\0" + + +#define CONFIG_SMC911X #define CONFIG_SMC911X_BASE 0xa8000000 -#define CONFIG_SMC911X_32_BIT 1 +#define CONFIG_SMC911X_32_BIT /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 @@ -130,21 +141,21 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- +/* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -/*----------------------------------------------------------------------- +/* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_TEXT_BASE 0xA0000000 @@ -156,33 +167,37 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) -/*----------------------------------------------------------------------- +/* * FLASH and environment organization */ #define CONFIG_SYS_FLASH_BASE 0xa0000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ -#define CONFIG_ENV_SIZE 4096 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max # of sectors/chip */ +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_OFFSET 0x00 /* env. starts here */ +#define CONFIG_ENV_SIZE 4096 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10 ms delay */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* byte addr. lenght */ -/*----------------------------------------------------------------------- +/* * CFI FLASH driver setup */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/mtd/cfi_flash.c */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ +/* + * Timeout for Flash Erase and Flash Write + * timeout values are in ticks + */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* * JFFS2 partitions @@ -196,11 +211,11 @@ #define CONFIG_MXC_GPIO -#define CONFIG_HARD_SPI 1 -#define CONFIG_MXC_SPI 1 +#define CONFIG_HARD_SPI +#define CONFIG_MXC_SPI #define CONFIG_CMD_SPI -#define CONFIG_S6E63D6 1 +#define CONFIG_S6E63D6 #define CONFIG_VIDEO #define CONFIG_CFB_CONSOLE diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index a239efc..f72ee02 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -37,6 +37,10 @@ #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#define MACH_TYPE_JADECPU 2636 + +#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU + /* * Environment settings */ diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index c117943..700124c 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -36,6 +36,9 @@ #ifndef _CONFIG_KM_ARM_H #define _CONFIG_KM_ARM_H +/* We got removed from Linux mach-types.h */ +#define MACH_TYPE_KM_KIRKWOOD 2255 + /* * High Level Configuration Options (easy to change) */ @@ -45,6 +48,8 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ +#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD + /* include common defines/options for all Keymile boards */ #include "keymile-common.h" @@ -69,7 +74,8 @@ /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ - "bootcountaddr=${bootcountaddr} ${mtdparts}" + "bootcountaddr=${bootcountaddr} ${mtdparts}" \ + " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" #define CONFIG_KM_DEF_ENV_CPU \ "boot=bootm ${load_addr_r} - -\0" \ @@ -254,7 +260,6 @@ int get_scl(void); #if defined(CONFIG_SYS_NO_FLASH) #define CONFIG_KM_UBI_PARTITION_NAME "ubi0" #undef CONFIG_FLASH_CFI_MTD -#undef CONFIG_CMD_JFFS2 #undef CONFIG_JFFS2_CMDLINE #endif diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index e51b270..ed36124 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -54,4 +54,7 @@ #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ #define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ +/* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */ +#define KM_XLX_PROGRAM_B_PIN 39 + #endif /* _CONFIG_KM_KIRKWOOD */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index a2b55d5..ea40290 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -45,6 +45,14 @@ */ #define CONFIG_SYS_TEXT_BASE 0x20002000 +/* + * since a number of boards are not being listed in linux + * arch/arm/tools/mach-types any more, the mach-types have to be + * defined here + */ +#define MACH_TYPE_MEESC 2165 +#define MACH_TYPE_ETHERCAN2 2407 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h index ac01a31..797b0df 100644 --- a/include/configs/mgcoge3un.h +++ b/include/configs/mgcoge3un.h @@ -76,6 +76,8 @@ MVGBE_SET_GMII_SPEED_TO_10_100 |\ MVGBE_SET_MII_SPEED_TO_100) +#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" + /* * PCIe port not used on mgcoge3un */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index c9d80ef..7e011ae 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -78,7 +78,7 @@ #define CONFIG_FSL_PMIC_CLK 1000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 2e5cde5..4253c3e 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -79,7 +79,7 @@ #define CONFIG_FSL_PMIC_CLK 1000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 79bae56..32ed609 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -73,6 +73,7 @@ #define CONFIG_PMIC_I2C #define CONFIG_PMIC_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 +#define CONFIG_RTC_MC13XXX /* * MFD MC9SDZ60 @@ -111,6 +112,7 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_NET_RETRY_COUNT 100 +#define CONFIG_CMD_DATE #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 028a842..7c7544f 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -41,12 +41,11 @@ * increase in the final file size: 144260 vs. 109536 Bytes. */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT #define CONFIG_MACH_TYPE MACH_TYPE_MX51_BABBAGE /* @@ -79,6 +78,7 @@ #define CONFIG_FSL_PMIC_CLK 2500000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 +#define CONFIG_RTC_MC13XXX /* * MMC Configs @@ -124,9 +124,11 @@ #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_DATE + #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 3e99031..15dfcb4 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -34,7 +34,6 @@ #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -90,7 +89,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "smc911x" +#define CONFIG_ETHPRIME "smc911x" /*Support LAN9217*/ #define CONFIG_SMC911X diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 4703248..7c49136 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -33,12 +33,11 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) @@ -51,9 +50,9 @@ #define CONFIG_SYS_MX53_UART1 /* I2C Configs */ -#define CONFIG_CMD_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MXC 1 +#define CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC #define CONFIG_SYS_I2C_MX53_PORT2 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0xfe @@ -63,6 +62,7 @@ #define CONFIG_PMIC_I2C #define CONFIG_PMIC_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 +#define CONFIG_RTC_MC13XXX /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -88,6 +88,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NET +#define CONFIG_CMD_DATE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -102,7 +103,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index c3e4e13..d699010 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -35,7 +35,6 @@ #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -86,7 +85,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index c117a33..48b32dd 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -34,7 +34,6 @@ #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -93,7 +92,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 diff --git a/include/configs/netspace_v2.h b/include/configs/netspace_v2.h index 82a1233..bb27ed7 100644 --- a/include/configs/netspace_v2.h +++ b/include/configs/netspace_v2.h @@ -60,11 +60,16 @@ */ #define CONFIG_SYS_TCLK 166000000 /* 166MHz */ +#define CONFIG_NR_DRAM_BANKS 1 +#ifdef CONFIG_INETSPACE_V2 +/* Different SDRAM configuration and size for Internet Space v2 */ +#define CONFIG_SYS_KWD_CONFIG ($(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg) +#endif + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ -#define CONFIG_NR_DRAM_BANKS 2 #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -103,6 +108,17 @@ #define CONFIG_KIRKWOOD_GPIO /* + * Enable I2C support + */ +#ifdef CONFIG_CMD_I2C +/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ +#endif /* CONFIG_CMD_I2C */ + +/* * File systems support */ #define CONFIG_CMD_EXT2 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 7a76288..47ec39f 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -1,6 +1,8 @@ /* - * (C) Copyright 2006-2008 - * Texas Instruments. + * Configuration settings for the TI OMAP3 EVM board. + * + * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ + * * Author : * Manikandan Pillai <mani.pillai@ti.com> * Derived from Beagle Board and 3430 SDP code by @@ -9,8 +11,6 @@ * * Manikandan Pillai <mani.pillai@ti.com> * - * Configuration settings for the TI OMAP3 EVM board. - * * See file CREDITS for list of people who contributed to this * project. * @@ -30,172 +30,82 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_OMAP3_EVM 1 /* working with EVM */ - -#define CONFIG_SDRC /* The chip has SDRC controller */ +#ifndef __OMAP3EVM_CONFIG_H +#define __OMAP3EVM_CONFIG_H -#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/cpu.h> #include <asm/arch/omap3.h> -/* - * Display CPU and Board information +/* ---------------------------------------------------------------------------- + * Supported U-boot commands + * ---------------------------------------------------------------------------- */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 +#include <config_cmd_default.h> -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 -#undef CONFIG_USE_IRQ /* no support for IRQs */ -#define CONFIG_MISC_INIT_R +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -/* - * Hardware drivers +/* ---------------------------------------------------------------------------- + * Supported U-boot features + * ---------------------------------------------------------------------------- */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ +/* Display CPU and Board information */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ +/* Add auto-completion support */ +#define CONFIG_AUTO_COMPLETE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_MMC 1 -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 +/* ---------------------------------------------------------------------------- + * Supported hardware + * ---------------------------------------------------------------------------- + */ -/* DDR - I use Micron DDR */ -#define CONFIG_OMAP3_MICRON_DDR 1 +/* MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION /* USB + * * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard * Enable CONFIG_MUSB_UDD for Device functionalities. */ -#define CONFIG_USB_OMAP3 1 -#define CONFIG_MUSB_HCD 1 -/* #define CONFIG_MUSB_UDC 1 */ - -#ifdef CONFIG_USB_OMAP3 - -#ifdef CONFIG_MUSB_HCD -#define CONFIG_CMD_USB - -#define CONFIG_USB_STORAGE -#define CONGIG_CMD_STORAGE -#define CONFIG_CMD_FAT - -#ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ - -#endif /* CONFIG_MUSB_HCD */ +#define CONFIG_USB_OMAP3 +#define CONFIG_MUSB_HCD +/* #define CONFIG_MUSB_UDC */ -#ifdef CONFIG_MUSB_UDC -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "EVM" -#endif /* CONFIG_MUSB_UDC */ - -#endif /* CONFIG_USB_OMAP3 */ - -/* commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 - -/* - * TWL4030 +/* ----------------------------------------------------------------------------- + * Include common board configuration + * ----------------------------------------------------------------------------- */ -#define CONFIG_TWL4030_POWER 1 +#include "omap3_evm_common.h" -/* - * Board NAND Info. +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- */ -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access */ - /* nand at CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ - /* NAND devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ - -/* Environment information */ #define CONFIG_BOOTDELAY 10 -#define CONFIG_BOOTFILE "uImage" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ @@ -231,133 +141,4 @@ "fi; " \ "else run nandboot; fi" -#define CONFIG_AUTO_COMPLETE 1 -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "OMAP3_EVM # " -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ - /* args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ - /* address */ - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET -#endif - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET - -/* - * Support for relocation - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Define the board revision statically - */ -/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ - -/*---------------------------------------------------------------------------- - * SMSC9115 Ethernet from SMSC9118 family - *---------------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NET) - -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 - -#endif /* (CONFIG_CMD_NET) */ - -/* - * BOOTP fields - */ - -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 - -#endif /* __CONFIG_H */ +#endif /* __OMAP3EVM_CONFIG_H */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h new file mode 100644 index 0000000..54aa7a7 --- /dev/null +++ b/include/configs/omap3_evm_common.h @@ -0,0 +1,292 @@ +/* + * Common configuration settings for the TI OMAP3 EVM board. + * + * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __OMAP3_EVM_COMMON_H +#define __OMAP3_EVM_COMMON_H + +/* + * High level configuration options + */ +#define CONFIG_OMAP /* This is TI OMAP core */ +#define CONFIG_OMAP34XX /* belonging to 34XX family */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ +#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */ +#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ + +#undef CONFIG_USE_IRQ /* no support for IRQs */ + +/* + * Clock related definitions + */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* Size of environment - 128KB */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* Size of malloc pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Stack sizes + * These values are used in start.S + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ + +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/* + * Physical Memory Map + * Note 1: CS1 may or may not be populated + * Note 2: SDRAM size is expected to be at least 32MB + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C + +/* Limits for memtest */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* ----------------------------------------------------------------------------- + * Hardware drivers + * ----------------------------------------------------------------------------- + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* + * I2C + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_OMAP34XX_I2C + +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 + +/* + * PISMO support + */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +/* Monitor at start of flash - Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +/* Start location & size of environment */ +#define ONENAND_ENV_OFFSET 0x260000 +#define SMNAND_ENV_OFFSET 0x260000 + +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ + +/* + * NAND + */ +/* Physical address to access NAND */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE + +/* Physical address to access NAND at CS0 */ +#define CONFIG_SYS_NAND_BASE NAND_BASE + +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Timeout values (in ticks) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) + +#define CONFIG_SYS_JFFS2_MEM_NAND +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* Start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +/* Size of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE 0xf980000 + +/* + * USB + */ +#ifdef CONFIG_USB_OMAP3 + +#ifdef CONFIG_MUSB_HCD +#define CONFIG_CMD_USB + +#define CONFIG_USB_STORAGE +#define CONGIG_CMD_STORAGE +#define CONFIG_CMD_FAT + +#ifdef CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_PREBOOT "usb start" +#endif /* CONFIG_USB_KEYBOARD */ + +#endif /* CONFIG_MUSB_HCD */ + +#ifdef CONFIG_MUSB_UDC +/* USB device configuration */ +#define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "EVM" +#endif /* CONFIG_MUSB_UDC */ + +#endif /* CONFIG_USB_OMAP3 */ + +/* ---------------------------------------------------------------------------- + * U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SYS_PROMPT "OMAP3_EVM # " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_MAXARGS 16 /* max args for a command */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of Console IO buffer */ +#define CONFIG_SYS_CBSIZE 512 + +/* Size of print buffer */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Size of bootarg buffer */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_BOOTFILE "uImage" + +/* + * NAND / OneNAND + */ +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#elif defined(CONFIG_CMD_ONENAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#endif + +#if !defined(CONFIG_ENV_IS_NOWHERE) +#if defined(CONFIG_CMD_NAND) +#define CONFIG_ENV_IS_IN_NAND +#elif defined(CONFIG_CMD_ONENAND) +#define CONFIG_ENV_IS_IN_ONENAND +#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET +#endif +#endif /* CONFIG_ENV_IS_NOWHERE */ + +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#if defined(CONFIG_CMD_NET) + +/* Ethernet (SMSC9115 from SMSC9118 family) */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 + +/* BOOTP fields */ +#define CONFIG_BOOTP_SUBNETMASK 0x00000001 +#define CONFIG_BOOTP_GATEWAY 0x00000002 +#define CONFIG_BOOTP_HOSTNAME 0x00000004 +#define CONFIG_BOOTP_BOOTPATH 0x00000010 + +#endif /* CONFIG_CMD_NET */ + +/* Support for relocation */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* ----------------------------------------------------------------------------- + * Board specific + * ----------------------------------------------------------------------------- + */ +#define CONFIG_SYS_NO_FLASH + +/* Uncomment to define the board revision statically */ +/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ + +#endif /* __OMAP3_EVM_COMMON_H */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h new file mode 100644 index 0000000..691e4c2 --- /dev/null +++ b/include/configs/omap3_evm_quick_mmc.h @@ -0,0 +1,91 @@ +/* + * Configuration settings for quick boot from MMC on OMAP3 EVM. + * + * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author : + * Sanjeev Premi <premi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __OMAP3_EVM_QUICK_MMC_H +#define __OMAP3_EVM_QUICK_MMC_H + +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +/* ---------------------------------------------------------------------------- + * Supported U-boot commands + * ---------------------------------------------------------------------------- + */ +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + +/* + * Board revision is detected by probing the Ethernet chip. + * + * When revision is statically configured via CONFIG_STATIC_BOARD_REV, + * this option can be removed. Generated binary is leaner by ~16Kbytes. + */ +#define CONFIG_CMD_NET + +/* ---------------------------------------------------------------------------- + * Supported U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SILENT_CONSOLE +#define CONFIG_ENV_IS_NOWHERE + +/* ---------------------------------------------------------------------------- + * Supported hardware + * ---------------------------------------------------------------------------- + */ + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* ----------------------------------------------------------------------------- + * Include common board configuration + * ----------------------------------------------------------------------------- + */ +#include "omap3_evm_common.h" + +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- + */ +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "silent=1" + +#define CONFIG_BOOTCOMMAND \ + "mmc rescan 0; " \ + "fatload mmc 0 0x82000000 uImage; " \ + "bootm 0x82000000;" + +/* + * Update the bootargs as necessary e.g. size of memory, partition and fstype + */ +#define CONFIG_BOOTARGS \ + "quiet " \ + "console=ttyO0,115200n8 " \ + "mem=128M " \ + "noinitrd " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait" + +#endif /* __OMAP3_EVM_QUICK_MMC_H */ diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h new file mode 100644 index 0000000..2d18314 --- /dev/null +++ b/include/configs/omap3_evm_quick_nand.h @@ -0,0 +1,79 @@ +/* + * Configuration settings for quick boot from NAND on OMAP3 EVM. + * + * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author : + * Sanjeev Premi <premi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __OMAP3_EVM_QUICK_NAND_H +#define __OMAP3_EVM_QUICK_NAND_H + +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +/* ---------------------------------------------------------------------------- + * Supported U-boot commands + * ---------------------------------------------------------------------------- + */ +#define CONFIG_CMD_NAND + +/* + * Board revision is detected by probing the Ethernet chip. + * + * When revision is statically configured via CONFIG_STATIC_BOARD_REV, + * this option can be removed. Generated binary is leaner by ~16Kbytes. + */ +#define CONFIG_CMD_NET + +/* ---------------------------------------------------------------------------- + * Supported U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SILENT_CONSOLE +#define CONFIG_ENV_IS_NOWHERE + +/* ----------------------------------------------------------------------------- + * Include common board configuration + * ----------------------------------------------------------------------------- + */ +#include "omap3_evm_common.h" + +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- + */ +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "silent=1" + +#define CONFIG_BOOTCOMMAND \ + "nandecc hw; " \ + "nand read.i 0x80000000 280000 300000; " \ + "bootm 0x80000000;" + +/* + * Update the bootargs as necessary e.g. size of memory, partition and fstype + */ +#define CONFIG_BOOTARGS \ + "quiet " \ + "console=ttyO0,115200n8 " \ + "mem=128M " \ + "noinitrd " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2 " + +#endif /* __OMAP3_EVM_QUICK_NAND_H */ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h new file mode 100644 index 0000000..a0252a2 --- /dev/null +++ b/include/configs/omap3_mvblx.h @@ -0,0 +1,313 @@ +/* + * MATRIX VISION GmbH mvBlueLYNX-X + * + * Derived from omap3_beagle.h: + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the TI OMAP3530 Beagle board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ +#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT 1 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 +#define CONFIG_SERIAL_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (2 << 10) /* 2 KiB */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_OMAP_HSMMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 +#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 +#define CONFIG_USBD_VENDORID 0x164c +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x0201 +#define CONFIG_USBD_PRODUCTID_CDCACM 0x0201 +#define CONFIG_USBD_MANUFACTURER "MATRIX VISION GmbH" +#define CONFIG_USBD_PRODUCT_NAME "mvBlueLYNX-X" + +/* no FLASH available */ +#define CONFIG_SYS_NO_FLASH + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_FPGA + +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_BUS 0 /* This isn't used anywhere ?? */ +#define CONFIG_SYS_I2C_BUS_SELECT 1 /* This isn't used anywhere ?? */ +#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_I2C_MULTI_BUS 1 + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER 1 + +/* Environment information */ +#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ + "console=ttyO2,115200n8\0" \ + "mpurate=600\0" \ + "vram=12M\0" \ + "dvimode=1024x768-24@60\0" \ + "defaultdisplay=dvi\0" \ + "fpgafilename=mvbluelynx_x.rbf\0" \ + "loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \ + "fpga load 0 ${loadaddr} ${filesize}; " \ + "fi;\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype} " \ + "${cmdline_suffix}\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "mmcbootcmd= " \ + "echo Trying mmc${mmcdev}; " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loading boot environment from mmc${mmcdev}; " \ + "run importbootenv; " \ + "fi;" \ + "run loadfpga; " \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi;" \ + "fi\0" + +#define CONFIG_BOOTCOMMAND \ + "setenv mmcdev 1;" \ + "run mmcbootcmd || " \ + "setenv mmcdev 0;" \ + "run mmcbootcmd" + + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "mvblx # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_ALT_MEMTEST 1 /* alternative memtest with looping */ +#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END (0x9dffffff) /* end = 448 MB */ +#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ + +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +#define CONFIG_ENV_IS_NOWHERE 1 + +/*---------------------------------------------------------------------------- + * Network Subsystem (SMSC9211 Ethernet from SMSC9118 family) + *---------------------------------------------------------------------------- + */ +#if defined(CONFIG_CMD_NET) + #define CONFIG_NET_MULTI + #define CONFIG_SMC911X 1 + #define CONFIG_SMC911X_32_BIT + #define CONFIG_SMC911X_BASE 0x2C000000 +#endif /* (CONFIG_CMD_NET) */ + +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 +#define CONFIG_SYS_FPGA_PROG_FEEDBACK +#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 2^4 = 16-byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_EEPROM_BUS_NUM 2 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_OMAP3_SPI + +#endif /* __CONFIG_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 889d5fc..380ef4f 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -165,4 +165,7 @@ #define COPY_BL2_SIZE 0x80000 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) + +/* Enable devicetree support */ +#define CONFIG_OF_LIBFDT #endif /* __CONFIG_H */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index e2c2eda..c068aa0 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -45,6 +45,13 @@ */ #define CONFIG_SYS_TEXT_BASE 0x20002000 +/* + * since a number of boards are not being listed in linux + * arch/arm/tools/mach-types any more, the mach-types have to be + * defined here + */ +#define MACH_TYPE_OTC570 2166 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ diff --git a/include/configs/portl2.h b/include/configs/portl2.h index a8543a5..e436cfe 100644 --- a/include/configs/portl2.h +++ b/include/configs/portl2.h @@ -46,7 +46,11 @@ #define CONFIG_PORTL2 #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ -#define KM_ENV_BUS "pca9544a:70:a" /* I2C2 (Mux-Port 2)*/ +/* + * Note: This is only valid for HW > P1A if you got an outdated P1A + * use KM_ENV_BUS "pca9544a:70:a" + */ +#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ /* * portl2 has a fixed link to the XMPP backplane diff --git a/include/configs/qong.h b/include/configs/qong.h index c61a9b3..3346802 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -25,9 +25,9 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ -#define CONFIG_QONG 1 +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_QONG #define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */ #define CONFIG_MX31_CLK32 32768 @@ -36,14 +36,14 @@ #define CONFIG_SYS_TEXT_BASE 0xa0000000 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1536 * 1024) /* * Hardware drivers @@ -58,7 +58,7 @@ #define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX #define CONFIG_PMIC #define CONFIG_PMIC_SPI @@ -71,14 +71,14 @@ /* FPGA */ #define CONFIG_FPGA -#define CONFIG_QONG_FPGA 1 +#define CONFIG_QONG_FPGA #define CONFIG_FPGA_BASE (CS1_BASE) #define CONFIG_FPGA_LATTICE #define CONFIG_FPGA_COUNT 1 #ifdef CONFIG_QONG_FPGA /* Ethernet */ -#define CONFIG_DNET 1 +#define CONFIG_DNET #define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE) /* Framebuffer and LCD */ @@ -92,6 +92,8 @@ #define CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) /* USB */ #define CONFIG_CMD_USB @@ -137,6 +139,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR #define CONFIG_CMD_SPI +#define CONFIG_CMD_UNZIP #define CONFIG_BOARD_LATE_INIT @@ -206,13 +209,13 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif -#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MISC_INIT_R /*----------------------------------------------------------------------- * Stack sizes * @@ -262,7 +265,7 @@ extern int qong_nand_rdy(void *chip); #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) @@ -275,13 +278,13 @@ extern int qong_nand_rdy(void *chip); * CFI FLASH driver setup */ /* Flash memory is CFI compliant */ -#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_SYS_FLASH_CFI /* Use drivers/cfi_flash.c */ -#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_FLASH_CFI_DRIVER /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use hardware sector protection */ -#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_PROTECTION /* * Filesystem @@ -311,6 +314,6 @@ extern int qong_nand_rdy(void *chip); #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) -#define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_BOARD_EARLY_INIT_F #endif /* __CONFIG_H */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index a52b0a5..3434de7 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -220,6 +220,8 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) +#define CONFIG_SYS_CACHELINE_SIZE 64 + #define CONFIG_PMIC #define CONFIG_PMIC_I2C #define CONFIG_PMIC_MAX8998 diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 4031016..cc14f97 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -243,4 +243,23 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#include <asm/arch/gpio.h> +/* + * I2C Settings + */ +#define CONFIG_SOFT_I2C_GPIO_SCL s5pc210_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_GPIO_SDA s5pc210_gpio_part1_get_nr(b, 6) + +#define CONFIG_SOFT_I2C +#define CONFIG_SOFT_I2C_READ_REPEATED_START +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS 7 + +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX8998 + #endif /* __CONFIG_H */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 59c9fdb..fc8bb06 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -37,6 +37,9 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +/* Mach Type */ +#define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310 + /* Keep L2 Cache Disabled */ #define CONFIG_L2_OFF 1 @@ -87,7 +90,10 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_MMC_U_BOOT + +/* MMC SPL */ +#define CONFIG_SPL +#define COPY_BL2_FNPTR_ADDR 0x00002488 #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" diff --git a/include/configs/tt01.h b/include/configs/tt01.h new file mode 100644 index 0000000..6ef25cd --- /dev/null +++ b/include/configs/tt01.h @@ -0,0 +1,254 @@ +/* + * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at> + * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> + * + * Configuration settings for the HALE TT-01 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + +/* High Level Configuration Options */ +#define CONFIG_ARM1136 +#define CONFIG_MX31 +#define CONFIG_MX31_HCLK_FREQ 26000000 +#define CONFIG_MX31_CLK32 32768 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_MACH_TYPE 3726 /* not yet in mach-types.h */ +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + + +/* + * Physical Memory Map: + * CS settings are defined by i.MX31: + * - CSD0 and CDS1 are 256MB each, starting at 0x80000000 and 0x9000000 + * - CS0 and CS1 are 128MB each, at A0000000 and A8000000 + * - CS2 to CS5 are 32MB each, at B0.., B2.., B4.., B6.. + * + * HALE set-up of the bluetechnix board for now is: + * - 128MB DDR (2x64MB, 2x16bit), connected to 32bit DDR ram interface + * - NOR-Flash (Spansion 32MB MCP, Flash+16MB PSRAM), 16bit interface at CS0 + * - S71WS256ND0BFWYM (and CS1 for 64MB S71WS512ND0 without PSRAM) + * the flash chip is a mirrorbit S29WS256N ! + * - the PSRAM is hooked to CS5 (0xB6000000) + * - Intel Strata Flash PF48F2000P0ZB00, 16bit interface at (CS0 or) CS1 + * - 64Mbit = 8MByte (will go away in the production set-up) + * - NAND-Flash NAND01GR3B2BZA6 at NAND-FC: + * 1Gbit=128MB, 2048+64 bytes/page, 64pages x 1024 blocks + * - Ethernet controller SMC9118 at CS4 via FPGA, 16bit interface + * + * u-boot will support the 32MB nor flash and the 128MB NAND flash, the PSRAM + * is not used right now. We should be able to reduce the SOM to NAND flash + * only and boot from there. + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) + +/* default load address, 1MB up the road */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1+0x100000) + +/* The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* Size of malloc() pool, make sure possible frame buffer fits */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 10*1024*1024) + +/* memtest works on all but the last 1MB (u-boot) and malloc area */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END \ + (PHYS_SDRAM_1+(PHYS_SDRAM_1_SIZE-CONFIG_SYS_MALLOC_LEN-0x100000)) + +/* CFI FLASH driver setup */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ +#define CONFIG_FLASH_SPANSION_S29WS_N +/* + * TODO: Bluetechnix (the supplier of the SOM) did define these values + * in their original version of u-boot (1.2 or so). This should be + * reviewed. + * + * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + * #define CONFIG_SYS_FLASH_PROTECTION + */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT (254+8) /* max number of sectors per chip */ + +/* + * FLASH and environment organization, only the Spansion chip is supported: + * - it has 254 * 128kB + 8 * 32kB blocks + * - this setup uses 4*32k+3*128k as monitor space = 0xA000 0000 to 0xA00F FFFF + * and 2 sectors with 128k as environment = + * A010 0000 to 0xA011 FFFF and 0xA012 0000 to 0xA013 FFFF + * - this could be less, but this is only for developer versions of the board + * and no-one is going to use the NOR flash anyway. + * + * Monitor is at the beginning of the NOR-Flash, 1MB reserved. Again this is + * way to large, but it avoids ENV overwrite (when updating u-boot) in case + * size breaks the next boundary (as it has with 128k). + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) /* smaller for faster access */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + +/* Hardware drivers */ + +/* + * on TT-01 UART1 pins are used by Audio, so we use UART2 + * TT-01 implements a hardware that turns off components depending on + * the power level. In PL=1 the RS232 transceiver is usually off, + * make sure that the transceiver is enabled during PL=1 for testing! + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX31_UART2 + +#define CONFIG_MXC_SPI +#define CONFIG_MXC_GPIO + +/* MC13783 connected to CSPI3 and SS0 */ +#define CONFIG_PMIC +#define CONFIG_PMIC_SPI +#define CONFIG_PMIC_FSL + +#define CONFIG_FSL_PMIC_BUS 2 +#define CONFIG_FSL_PMIC_CS 0 +#define CONFIG_FSL_PMIC_CLK 1000000 +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_BITLEN 32 + +#define CONFIG_RTC_MC13XXX + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +/* console is UART2 on TT-01 */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* ethernet setup for the onboard smc9118 */ +#define CONFIG_MII +#define CONFIG_SMC911X +/* 16 bit, onboard ethernet, decoded via MACH-MX0 FPGA at 0x84200000 */ +#define CONFIG_SMC911X_BASE (CS4_BASE+0x200000) +#define CONFIG_SMC911X_16_BIT + +/* + * Command definition + */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_NAND +/* + * #define CONFIG_CMD_NAND_LOCK_UNLOCK the NAND01... chip does not support + * the NAND_CMD_LOCK_STATUS command, however the NFC of i.MX31 supports + * a software locking scheme. + */ + +#define CONFIG_BOOTDELAY 3 + +/* + * currently a default setting for booting via script is implemented + * set user to login name and serverip to tftp host, define your + * boot behaviour in bootscript.loginname + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootcmd=dhcp bootscript.$(user); source\0" + +#define CONFIG_BOOTP_SERVERIP /* tftp serverip not overruled by dhcp server */ +#define CONFIG_BOOTP_SEND_HOSTNAME /* if env-var 'hostname' is set, send it */ + +/* Miscellaneous configurable options */ +#define CONFIG_HUSH_PARSER +#define CONFIG_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "TT01> " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_NAND_MXC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +/* + * actually this is nothing someone wants to configure! + * CONFIG_SYS_NAND_BASE despite being passed to board_nand_init() + * is not used by the driver. + */ +#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR +#define CONFIG_MXC_NAND_HWECC + +/* the current u-boot driver does not use the nand flash setup! */ +#define CONFIG_SYS_NAND_LARGEPAGE +/* + * it's not 16 bit: + * #define CONFIG_SYS_NAND_BUSWIDTH_16BIT + * the current u-boot mxc_nand.c tries to auto-detect, but this only + * reads the boot settings during reset (which might be wrong) + */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 8cb57ff..f77c546 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -34,6 +34,12 @@ /* NAND BOOT is the only boot method */ #define CONFIG_NAND_U_BOOT +#ifndef MACH_TYPE_TX25 +#define MACH_TYPE_TX25 2177 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_TX25 + #ifdef CONFIG_NAND_SPL /* Start copying real U-boot from the second page */ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 diff --git a/include/configs/vision2.h b/include/configs/vision2.h index bee9e97..f321ad2 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -36,11 +36,13 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_BOARD_LATE_INIT +#ifndef MACH_TYPE_TTC_VISION2 +#define MACH_TYPE_TTC_VISION2 2775 +#endif #define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2 /* @@ -95,7 +97,7 @@ #define CONFIG_FSL_PMIC_CLK 2500000 #define CONFIG_FSL_PMIC_MODE SPI_MODE_0 #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* * MMC Configs |