summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/DU440.h16
-rw-r--r--include/configs/MPC8315ERDB.h23
-rw-r--r--include/configs/MPC8323ERDB.h12
-rw-r--r--include/configs/MPC837XEMDS.h28
-rw-r--r--include/configs/MPC837XERDB.h23
-rw-r--r--include/configs/MigoR.h151
-rw-r--r--include/configs/alpr.h14
-rw-r--r--include/configs/canyonlands.h126
-rw-r--r--include/configs/korat.h67
-rw-r--r--include/configs/lwmon5.h8
-rw-r--r--include/configs/mpr2.h92
-rw-r--r--include/configs/r2dplus.h150
-rw-r--r--include/configs/r7780mp.h165
-rw-r--r--include/configs/sequoia.h4
14 files changed, 826 insertions, 53 deletions
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 4fb6921..d54da97 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -157,10 +157,9 @@
*/
#define CFG_MBYTES_SDRAM (1024) /* 512 MiB TODO: remove */
#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
+#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
+ /* 440EPx errata CHIP 11 */
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
-#if 0
-#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */
-#endif
#define CONFIG_DDR_ECC /* Use ECC when available */
#define SPD_EEPROM_ADDRESS {0x50}
#define CONFIG_PROG_SDRAM_TLB
@@ -244,9 +243,6 @@
"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
"cp.b 100000 FFFA0000 60000\0" \
""
-#if 0
-#define CONFIG_BOOTCOMMAND "run flash_self"
-#endif
#define CONFIG_PREBOOT /* enable preboot variable */
@@ -264,7 +260,7 @@ int du440_phy_addr(int devnum);
#define CONFIG_PHY_ADDR du440_phy_addr(0) /* PHY address */
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_GIGE 1 /* Include GbE detection */
+#undef CONFIG_PHY_GIGE /* no GbE detection */
#define CONFIG_HAS_ETH0
#define CFG_RX_ETH_BUFFER 128
@@ -295,7 +291,9 @@ int du440_phy_addr(int devnum);
#include <config_cmd_default.h>
+#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_CMD_BSP
+#define CONFIG_CMD_BMP
#define CONFIG_CMD_DATE
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
@@ -431,8 +429,6 @@ int du440_phy_addr(int devnum);
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-#if 0
-#define CONFIG_SHOW_ACTIVITY 1
-#endif
+#define CONFIG_AUTOSCRIPT 1
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index af78726..432fb31 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -349,6 +349,29 @@
#define CONFIG_ETHPRIME "eTSEC1"
/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET 0x18000
+#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET 0x19000
+#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
* Environment
*/
#ifndef CFG_RAMBOOT
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 94c4c6b..92d7aa4 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -323,8 +323,11 @@
/*
* Config on-board EEPROM
*/
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* General PCI
@@ -341,7 +344,7 @@
#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */
#ifdef CONFIG_PCI
-
+#define CONFIG_PCI_SKIP_HOST_BRIDGE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
@@ -549,6 +552,9 @@
#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */
#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02
+/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CFG_I2C_MAC_OFFSET 0x7f00 /* MAC address offset in I2C EEPROM */
+
#define CONFIG_IPADDR 10.0.0.2
#define CONFIG_SERVERIP 10.0.0.1
#define CONFIG_GATEWAYIP 10.0.0.1
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index b307bf7..7c4e76e 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -389,6 +389,34 @@
/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME "eTSEC1"
+/* SERDES */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+#define CONFIG_FSL_SERDES2 0xe3100
+
+/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET 0x18000
+#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET 0x19000
+#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
/*
* Environment
*/
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 90812e9..eaac525 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -416,6 +416,29 @@
#endif
/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET 0x18000
+#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET 0x19000
+#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
* Environment
*/
#ifndef CFG_RAMBOOT
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
new file mode 100644
index 0000000..99e1179
--- /dev/null
+++ b/include/configs/MigoR.h
@@ -0,0 +1,151 @@
+/*
+ * Configuation settings for the Renesas Solutions Migo-R board
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MIGO_R_H
+#define __MIGO_R_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7722 1
+#define CONFIG_MIGO_R 1
+
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_ENV
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.10.100
+#define CONFIG_SERVERIP 192.168.10.77
+#define CONFIG_GATEWAYIP 192.168.10.77
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* SMC9111 */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE (0xB0000000)
+
+/* MEMORY */
+#define MIGO_R_SDRAM_BASE (0x8C000000)
+#define MIGO_R_FLASH_BASE_1 (0xA0000000)
+#define MIGO_R_FLASH_BANK_SIZE (64 * 1024 * 1024)
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Buffer size for input from the Console */
+#define CFG_PBSIZE 256 /* Buffer size for Console output */
+#define CFG_MAXARGS 16 /* max args accepted for monitor commands */
+#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
+
+/* SCIF */
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF0 1
+#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console
+ information at boot */
+#undef CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef CFG_CONSOLE_ENV_OVERWRITE
+
+#define CFG_MEMTEST_START (MIGO_R_SDRAM_BASE)
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024))
+
+/* Enable alternate, more extensive, memory test */
+#undef CFG_ALT_MEMTEST
+/* Scratch address used by the alternate memory test */
+#undef CFG_MEMTEST_SCRATCH
+
+/* Enable temporary baudrate change while serial download */
+#undef CFG_LOADS_BAUD_CHANGE
+
+#define CFG_SDRAM_BASE (MIGO_R_SDRAM_BASE)
+/* maybe more, but if so u-boot doesn't know about it... */
+#define CFG_SDRAM_SIZE (64 * 1024 * 1024)
+/* default load address for scripts ?!? */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024)
+
+/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
+#define CFG_MONITOR_BASE (MIGO_R_FLASH_BASE_1)
+/* Monitor size */
+#define CFG_MONITOR_LEN (128 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CFG_MALLOC_LEN (256 * 1024)
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE (256)
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_QUIET_TEST
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+/* Physical start address of Flash memory */
+#define CFG_FLASH_BASE (MIGO_R_FLASH_BASE_1)
+/* Max number of sectors on each Flash chip */
+#define CFG_MAX_FLASH_SECT 512
+
+/* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) }
+
+/* Timeout for Flash erase operations (in ms) */
+#define CFG_FLASH_ERASE_TOUT (3 * 1000)
+/* Timeout for Flash write operations (in ms) */
+#define CFG_FLASH_WRITE_TOUT (3 * 1000)
+/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CFG_FLASH_LOCK_TOUT (3 * 1000)
+/* Timeout for Flash clear lock bit operations (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT (3 * 1000)
+
+/* Use hardware flash sectors protection instead of U-Boot software protection */
+#undef CFG_FLASH_PROTECTION
+#undef CFG_DIRECT_FLASH_TFTP
+
+/* ENV setting */
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_ENV_SECT_SIZE (128 * 1024)
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+/* Offset of env Flash sector relative to CFG_FLASH_BASE */
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __MIGO_R_H */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 38fb7c6..3e906c4 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006-2007
+ * (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -35,6 +35,7 @@
#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+#define CONFIG_4xx_DCACHE /* Enable i- and d-cache */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
@@ -144,6 +145,8 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth3\0" \
"hostname=alpr\0" \
+ "fdt_file=alpr/alpr.dtb\0" \
+ "fdt_addr=400000\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath} ${init}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -158,6 +161,10 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
+ "net_nfs_fdt=tftp 200000 ${bootfile};" \
+ "tftp ${fdt_addr} ${fdt_file};" \
+ "run nfsargs addip addtty;" \
+ "bootm 200000 - ${fdt_addr}\0" \
"rootpath=/opt/projects/alpr/nfs_root\0" \
"bootfile=/alpr/uImage\0" \
"kernel_addr=fff00000\0" \
@@ -370,4 +377,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index a4bcc65..a1c6674 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -27,16 +27,21 @@
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_CANYONLANDS 1 /* Board is Canyonlands */
+/* This config file is used for Canyonlands (460EX) and Glacier (460GT) */
+#ifndef CONFIG_CANYONLANDS
+#define CONFIG_460GT 1 /* Specific PPC460GT */
+#else
+#define CONFIG_460EX 1 /* Specific PPC460EX */
+#endif
#define CONFIG_440 1
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_460EX 1 /* Specific PPC460EX support */
#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+#define CONFIG_BOARD_TYPES 1 /* support board types */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
@@ -262,8 +267,15 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 1
-#define CONFIG_HAS_ETH0 1
-#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+/* Only Glacier (460GT) has 4 EMAC interfaces */
+#ifdef CONFIG_460GT
+#define CONFIG_PHY2_ADDR 2
+#define CONFIG_PHY3_ADDR 3
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#endif
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
@@ -275,6 +287,8 @@
/*-----------------------------------------------------------------------
* USB-OHCI
*----------------------------------------------------------------------*/
+/* Only Canyonlands (460EX) has USB */
+#ifdef CONFIG_460EX
#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_STORAGE
#undef CFG_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors */
@@ -283,6 +297,7 @@
#define CFG_USB_OHCI_REGS_BASE (CFG_AHB_BASE | 0xd0000)
#define CFG_USB_OHCI_SLOT_NAME "ppc440"
#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#endif
/*-----------------------------------------------------------------------
* Default environment
@@ -293,9 +308,21 @@
#undef CONFIG_BOOTARGS
+/* Setup some board specific values for the default environment variables */
+#ifdef CONFIG_CANYONLANDS
+#define CONFIG_HOSTNAME canyonlands
+#define CFG_BOOTFILE "bootfile=canyonlands/uImage\0"
+#define CFG_DTBFILE "fdt_file=canyonlands/canyonlands.dtb\0"
+#else
+#define CONFIG_HOSTNAME glacier
+#define CFG_BOOTFILE "bootfile=glacier/uImage\0"
+#define CFG_DTBFILE "fdt_file=glacier/glacier.dtb\0"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ CFG_BOOTFILE \
+ CFG_DTBFILE \
"netdev=eth0\0" \
- "hostname=canyonlands\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -315,18 +342,16 @@
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"rootpath=/opt/eldk/ppc_4xxFP\0" \
- "bootfile=canyonlands/uImage\0" \
- "fdt_file=canyonlands/canyonlands.dtb\0" \
"fdt_addr=400000\0" \
"kernel_addr=fc000000\0" \
"ramdisk_addr=fc200000\0" \
"initrd_high=30000000\0" \
- "load=tftp 200000 canyonlands/u-boot.bin\0" \
+ "load=tftp 200000 ${hostname}/u-boot.bin\0" \
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
"cp.b ${fileaddr} fffa0000 ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
- "nload=tftp 200000 canyonlands/u-boot-nand.bin\0" \
+ "nload=tftp 200000 ${hostname}/u-boot-nand.bin\0" \
"nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0" \
@@ -361,8 +386,6 @@
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
@@ -373,7 +396,11 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
+#ifdef CONFIG_460EX
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB
+#endif
/* Partitions */
#define CONFIG_MAC_PARTITION
@@ -487,6 +514,8 @@
/*
* PPC4xx GPIO Configuration
*/
+#ifdef CONFIG_460EX
+/* 460EX: Use USB configuration */
#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
{ \
/* GPIO Core 0 */ \
@@ -559,6 +588,81 @@
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
} \
}
+#else
+/* 460GT: Use EMAC2+3 configuration */
+#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
+{ \
+/* GPIO Core 0 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
+}, \
+{ \
+/* GPIO Core 1 */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
+} \
+}
+#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
diff --git a/include/configs/korat.h b/include/configs/korat.h
index dcec9b0..48d73ac 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -45,10 +45,10 @@
* Manufacturer's information serial EEPROM parameters
*/
#define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */
-#define MAN_SERIAL_NO_FIELD 2
-#define MAN_SERIAL_NO_LENGTH 13
+#define MAN_INFO_FIELD 2
+#define MAN_INFO_LENGTH 9
#define MAN_MAC_ADDR_FIELD 3
-#define MAN_MAC_ADDR_LENGTH 17
+#define MAN_MAC_ADDR_LENGTH 12
/*
* Base addresses -- Note these are effective addresses where the actual
@@ -57,17 +57,18 @@
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */
-#define CFG_BOOT_BASE_ADDR 0xf0000000
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
+#define CFG_FLASH0_SIZE 0x01000000
+#define CFG_FLASH0_ADDR (-CFG_FLASH0_SIZE)
+#define CFG_FLASH1_TOP 0xF8000000
+#define CFG_FLASH1_MAX_SIZE 0x08000000
+#define CFG_FLASH1_ADDR (CFG_FLASH1_TOP - CFG_FLASH1_MAX_SIZE)
+#define CFG_FLASH_BASE CFG_FLASH1_ADDR /* start of FLASH */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_OCM_BASE 0xe0010000 /* ocm */
#define CFG_OCM_DATA_ADDR CFG_OCM_BASE
#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
-#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
-#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
/* Don't change either of these */
#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
@@ -108,13 +109,14 @@
/*
* FLASH related
*/
-#define CFG_FLASH_CFI /* The flash is CFI compatible */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CONFIG_FLASH_CFI_LEGACY /* Allow hard-coded config for FLASH0 */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH1_ADDR, CFG_FLASH0_ADDR }
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
@@ -126,12 +128,12 @@
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-/* Address and size of Redundant Environment Sector */
-#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
/*
* DDR SDRAM
@@ -144,6 +146,8 @@
#define SPD_EEPROM_ADDRESS {0x50}
#define CONFIG_PROG_SDRAM_TLB
#define CFG_DRAM_TEST
+#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
+ /* 440EPx errata CHIP 11 */
/*
* I2C
@@ -180,6 +184,7 @@
#define CFG_BOOTFILE "bootfile=/tftpboot/korat/uImage\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
+/* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */
#define CONFIG_EXTRA_ENV_SETTINGS \
CFG_BOOTFILE \
CFG_ROOTPATH \
@@ -197,8 +202,8 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
- "kernel_addr=FC000000\0" \
- "ramdisk_addr=FC180000\0" \
+ "kernel_addr=F4000000\0" \
+ "ramdisk_addr=F4400000\0" \
"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
"cp.b 200000 FFFA0000 60000\0" \
@@ -216,7 +221,7 @@
#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */
#define CONFIG_PHY_DYNAMIC_ANEG 1
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#undef CONFIG_PHY_RESET /* Don't do software PHY reset */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_HAS_ETH0
@@ -322,6 +327,11 @@
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*
+ * Korat-specific options
+ */
+#define CFG_KORAT_MAN_RESET_MS 10000 /* timeout for manufacturer reset */
+
+/*
* PCI stuff
*/
/* General PCI */
@@ -350,12 +360,23 @@
*/
/* Memory Bank 0 (NOR-FLASH) initialization */
+#if CFG_FLASH0_SIZE == 0x01000000
+#define CFG_EBC_PB0AP 0x04017300
+#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x0009A000)
+#elif CFG_FLASH0_SIZE == 0x04000000
#define CFG_EBC_PB0AP 0x04017300
-#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0x000DA000)
+#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x000DA000)
+#else
+#error Unable to configure chip select for current CFG_FLASH0_SIZE
+#endif
/* Memory Bank 1 (NOR-FLASH) initialization */
+#if CFG_FLASH1_MAX_SIZE == 0x08000000
#define CFG_EBC_PB1AP 0x04017300
-#define CFG_EBC_PB1CR (0xF8000000 | 0x000DA000)
+#define CFG_EBC_PB1CR (CFG_FLASH1_ADDR | 0x000FA000)
+#else
+#error Unable to configure chip select for current CFG_FLASH1_MAX_SIZE
+#endif
/* Memory Bank 2 (CPLD) initialization */
#define CFG_EBC_PB2AP 0x04017300
@@ -426,6 +447,7 @@
* GPIO63 xxxx x x (reserved for trace port)
*/
+#define CFG_GPIO_ATMEGA_RESET_ 12
#define CFG_GPIO_ATMEGA_SS_ 13
#define CFG_GPIO_PHY0_FIBER_SEL 27
#define CFG_GPIO_PHY1_FIBER_SEL 28
@@ -435,6 +457,7 @@
#define CFG_GPIO_SFP1_TX_EN_ 33
#define CFG_GPIO_PHY0_EN 45
#define CFG_GPIO_PHY1_EN 46
+#define CFG_GPIO_RESET_PRESSED_ 47
/*
* PPC440 GPIO Configuration
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index ced7ba6..4398b87 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -86,6 +86,8 @@
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
/* unused GPT0 COMP reg */
+#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
+ /* 440EPx errata CHIP 11 */
/* Additional registers for watchdog timer post test */
@@ -149,12 +151,8 @@
#define CFG_MBYTES_SDRAM (256) /* 256MB */
#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
#define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */
-#if 0 /* test-only: disable ECC for now */
#define CONFIG_DDR_ECC 1 /* enable ECC */
#define CFG_POST_ECC_ON CFG_POST_ECC
-#else
-#define CFG_POST_ECC_ON 0
-#endif
/* POST support */
#define CONFIG_POST (CFG_POST_CACHE | \
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
new file mode 100644
index 0000000..0fc0b97
--- /dev/null
+++ b/include/configs/mpr2.h
@@ -0,0 +1,92 @@
+/*
+ * Configuation settings for MPR2
+ *
+ * Copyright (C) 2008
+ * Mark Jonas <mark.jonas@de.bosch.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MPR2_H
+#define __MPR2_H
+
+/* Supported commands */
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FLASH
+
+/* Default environment variables */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS "console=ttySC0,115200"
+#define CONFIG_BOOTFILE /boot/zImage
+#define CONFIG_LOADADDR 0x8E000000
+#define CONFIG_VERSION_VARIABLE
+
+/* CPU and platform */
+#define CONFIG_SH 1
+#define CONFIG_SH3 1
+#define CONFIG_CPU_SH7720 1
+#define CONFIG_MPR2 1
+
+/* U-Boot internals */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Buffer size for input from the Console */
+#define CFG_PBSIZE 256 /* Buffer size for Console output */
+#define CFG_MAXARGS 16 /* max args accepted for monitor commands */
+#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024)
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (128 * 1024)
+#define CFG_MALLOC_LEN (256 * 1024)
+#define CFG_GBL_DATA_SIZE 256
+
+/* Memory */
+#define CFG_SDRAM_BASE 0x8C000000
+#define CFG_SDRAM_SIZE (64 * 1024 * 1024)
+#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024))
+
+/* Flash */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_BASE 0xA0000000
+#define CFG_MAX_FLASH_SECT 256
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE (128 * 1024)
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_WRITE_TOUT 500
+
+/* Clocks */
+#define CONFIG_SYS_CLK_FREQ 24000000
+#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+/* UART */
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF0 1
+
+#endif /* __MPR2_H */
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
new file mode 100644
index 0000000..c20baca
--- /dev/null
+++ b/include/configs/r2dplus.h
@@ -0,0 +1,150 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7751 1
+#define CONFIG_CPU_SH_TYPE_R 1
+#define CONFIG_R2DPLUS 1
+#define __LITTLE_ENDIAN__ 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+
+/* SCIF */
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONS_SCIF1 1
+#define BOARD_LATE_INIT 1
+
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "console=ttySC0,115200"
+#define CONFIG_ENV_OVERWRITE 1
+
+/* Network setting */
+#define CONFIG_NETMASK 255.0.0.0
+#define CONFIG_IPADDR 10.0.192.51
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+
+/* SDRAM */
+#define CFG_SDRAM_BASE (0x8C000000)
+#define CFG_SDRAM_SIZE (0x04000000)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT "=> "
+#define CFG_CBSIZE 256
+#define CFG_PBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024)
+/* Address of u-boot image in Flash */
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE)
+#define CFG_MONITOR_LEN (128 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CFG_MALLOC_LEN (256 * 1024)
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE (256)
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+
+/*
+ * NOR Flash
+ */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+
+#if defined(CONFIG_R2DPLUS_OLD)
+#define CFG_FLASH_BASE (0xA0000000)
+#define CFG_MAX_FLASH_BANKS (1) /* Max number of
+ * Flash memory banks
+ */
+#define CFG_MAX_FLASH_SECT 142
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#else /* CONFIG_R2DPLUS_OLD */
+
+#define CFG_FLASH_BASE (0xA0000000)
+#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */
+#define CFG_MAX_FLASH_BANKS (2)
+#define CFG_MAX_FLASH_SECT 270
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
+ CFG_FLASH_BASE + 0x100000,\
+ CFG_FLASH_BASE + 0x400000,\
+ CFG_FLASH_BASE + 0x700000, }
+#endif /* CONFIG_R2DPLUS_OLD */
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_WRITE_TOUT 500
+
+/*
+ * SuperH Clock setting
+ */
+#define CONFIG_SYS_CLK_FREQ 60000000
+#define TMU_CLK_DIVIDER 4
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CFG_PLL_SETTLING_TIME 100/* in us */
+
+/*
+ * IDE support
+ */
+#define CONFIG_IDE_RESET 1
+#define CFG_PIO_MODE 1
+#define CFG_IDE_MAXBUS 1 /* IDE bus */
+#define CFG_IDE_MAXDEVICE 1
+#define CFG_ATA_BASE_ADDR 0xb4000000
+#define CFG_ATA_STRIDE 2 /* 1bit shift */
+#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */
+#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */
+#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */
+
+/*
+ * SuperH PCI Bridge Configration
+ */
+#define CONFIG_PCI
+#define CONFIG_SH4_PCI
+#define CONFIG_SH7751_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW 1
+#define __io
+#define __mem_pci
+
+#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
+#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */
+
+/*
+ * Network device (RTL8139) support
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8139
+#define _IO_BASE 0x00000000
+#define KSEG1ADDR(x) (x)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
new file mode 100644
index 0000000..42787f4
--- /dev/null
+++ b/include/configs/r7780mp.h
@@ -0,0 +1,165 @@
+/*
+ * Configuation settings for the Renesas R7780MP board
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __R7780RP_H
+#define __R7780RP_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4A 1
+#define CONFIG_CPU_SH7780 1
+#define CONFIG_R7780MP 1
+#define __LITTLE_ENDIAN 1
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+
+#define CFG_SCIF_CONSOLE 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONS_SCIF0 1
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC0,115200"
+#define CONFIG_ENV_OVERWRITE 1
+
+/* check for keypress on bootdelay==0 */
+/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
+
+/* Network setting */
+#define CONFIG_NETMASK 255.0.0.0
+#define CONFIG_IPADDR 10.0.192.82
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+
+#define CFG_SDRAM_BASE (0x08000000)
+#define CFG_SDRAM_SIZE (128 * 1024 * 1024)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT "=> "
+#define CFG_CBSIZE 256
+#define CFG_PBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
+
+/* NOR Flash (S29PL127J60TFI130) */
+#define CFG_FLASH_BASE (0xA0000000)
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+#define CFG_MAX_FLASH_BANKS (2)
+#define CFG_MAX_FLASH_SECT 270
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
+ CFG_FLASH_BASE + 0x100000,\
+ CFG_FLASH_BASE + 0x400000,\
+ CFG_FLASH_BASE + 0x700000, }
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024)
+/* Address of u-boot image in Flash */
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE)
+#define CFG_MONITOR_LEN (112 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CFG_MALLOC_LEN (256 * 1024)
+
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE (256)
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+#define CFG_RX_ETH_BUFFER (8)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_CFI_BROKEN_TABLE
+#undef CFG_FLASH_QUIET_TEST
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE (16 * 1024)
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_WRITE_TOUT 500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER 4
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+/* PCI Controller */
+#if defined(CONFIG_CMD_PCI)
+#define CONFIG_PCI
+#define CONFIG_SH4_PCI
+#define CONFIG_SH7780_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW 1
+#define __io
+#define __mem_pci
+
+#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
+
+#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
+#endif /* CONFIG_CMD_PCI */
+
+#if defined(CONFIG_CMD_NET)
+/* #define CONFIG_NET_MULTI
+ #define CONFIG_RTL8169 */
+/* AX88696L Support(NE2000 base chip) */
+#define CONFIG_DRIVER_NE2000
+#define CONFIG_DRIVER_AX88796L
+#define CONFIG_DRIVER_NE2000_BASE 0xA4100000
+#endif
+
+/* Compact flash Support */
+#if defined(CONFIG_CMD_IDE)
+#define CONFIG_IDE_RESET 1
+#define CFG_PIO_MODE 1
+#define CFG_IDE_MAXBUS 1 /* IDE bus */
+#define CFG_IDE_MAXDEVICE 1
+#define CFG_ATA_BASE_ADDR 0xb4000000
+#define CFG_ATA_STRIDE 2 /* 1bit shift */
+#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */
+#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */
+#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */
+#endif /* CONFIG_CMD_IDE */
+
+#endif /* __R7780RP_H */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index dfa8779..555316f 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -221,6 +221,8 @@
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
#endif
+#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
+ /* 440EPx errata CHIP 11 */
/*
* I2C
@@ -275,7 +277,7 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "addmisc=setenv bootargs ${bootargs} mem=${mem}\0" \
+ "addmisc=setenv bootargs ${bootargs}\0" \
"flash_nfs=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty addmisc;" \
generated by cgit v1.1 at 2024-12-12 21:42:13 +0000