diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/AdderII.h | 4 | ||||
| -rw-r--r-- | include/configs/MIP405.h | 10 | ||||
| -rw-r--r-- | include/configs/PIP405.h | 12 | ||||
| -rw-r--r-- | include/configs/SXNI855T.h | 29 |
4 files changed, 39 insertions, 16 deletions
diff --git a/include/configs/AdderII.h b/include/configs/AdderII.h index c2cff23..4c2ba7d 100644 --- a/include/configs/AdderII.h +++ b/include/configs/AdderII.h @@ -48,10 +48,10 @@ #define CONFIG_CLOCKS_IN_MHZ 1 /* Monitor Functions */ -#define CONFIG_COMMANDS ( CFG_CMD_FLASH | \ +#define CONFIG_COMMANDS ( CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ CFG_CMD_MEMORY| \ CFG_CMD_NET | \ - CFG_CMD_ENV | \ CFG_CMD_PING | \ CFG_CMD_SDRAM ) diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 49b830b..61a799d 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -67,6 +67,7 @@ CFG_CMD_DATE | \ CFG_CMD_ELF | \ CFG_CMD_MII | \ + CFG_CMD_FAT | \ CFG_CMD_PING | \ CFG_CMD_SAVES | \ CFG_CMD_BSP ) @@ -246,9 +247,10 @@ /* * Init Memory Controller: */ - -#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ +#define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */ +#define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */ +/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ +#define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */ #define CONFIG_BOARD_PRE_INIT @@ -325,7 +327,7 @@ #undef CONFIG_IDE_LED /* no led for ide supported */ #define CONFIG_IDE_RESET /* reset for ide supported... */ #define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */ - +#define CONFIG_SUPPORT_VFAT /************************************************************ * ATAPI support (experimental) ************************************************************/ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index d9f8be8..b9107cc 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -50,11 +50,13 @@ CFG_CMD_PCI | \ CFG_CMD_CACHE | \ CFG_CMD_IRQ | \ + CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO | \ CFG_CMD_FDC | \ CFG_CMD_SCSI | \ + CFG_CMD_FAT | \ CFG_CMD_DATE | \ CFG_CMD_ELF | \ CFG_CMD_USB | \ @@ -141,7 +143,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - +#define CONFIG_MISC_INIT_R /*********************************************************** * Miscellaneous configurable options **********************************************************/ @@ -231,9 +233,12 @@ /* * Init Memory Controller: */ +#define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */ +#define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */ +/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ +#define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */ -#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ +#define CONFIG_BOARD_PRE_INIT /* Configuration Port location */ #define CONFIG_PORT_ADDR 0xF4000000 @@ -299,6 +304,7 @@ #undef CONFIG_IDE_LED /* no led for ide supported */ #define CONFIG_IDE_RESET /* reset for ide supported... */ #define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */ +#define CONFIG_SUPPORT_VFAT /************************************************************ * ATAPI support (experimental) diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index bdaf683..d6fa798 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -145,12 +145,22 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_EEPROM | \ + CFG_CMD_JFFS2 | \ CFG_CMD_NAND | \ CFG_CMD_DATE) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_JFFS_CUSTOM_PART +#define CFG_JFFS2_SORT_FRAGMENTS +/* JFFS2 location when using NOR flash */ +#define CFG_JFFS2_BASE (CFG_FLASH_BASE + 0x80000) +#define CFG_JFFS2_SIZE (0x780000) +/* JFFS2 location (in RAM) when using NAND flash */ +#define CFG_JFFS2_RAMBASE 0x400000 +#define CFG_JFFS2_RAMSIZE 0x200000 /* NAND boot partition is 2MiB */ + /* NAND flash support */ #define CONFIG_MTD_NAND_ECC_JFFS2 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -405,13 +415,18 @@ #define CONFIG_RESET_ON_PANIC /* reset if system panic() */ -/* to put environment in EEROM */ -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0 /* Start right at beginning of NVRAM */ -#define CFG_ENV_SIZE 1024 /* Use only a part of it*/ - -#if 1 -#define CONFIG_BOOT_RETRY_TIME 60 /* boot if no command in 60 seconds */ +#define CFG_ENV_IS_IN_FLASH +#ifdef CFG_ENV_IS_IN_FLASH + /* environment is in FLASH */ + #define CFG_ENV_ADDR 0xF8040000 /* AM29LV641 or AM29LV800BT */ + #define CFG_ENV_ADDR_REDUND 0xF8050000 /* AM29LV641 or AM29LV800BT */ + #define CFG_ENV_SECT_SIZE 0x00010000 + #define CFG_ENV_SIZE 0x00002000 +#else + /* environment is in EEPROM */ + #define CFG_ENV_IS_IN_EEPROM 1 + #define CFG_ENV_OFFSET 0 /* at beginning of EEPROM */ + #define CFG_ENV_SIZE 1024 /* Use only a part of it*/ #endif #if 1 |