diff options
Diffstat (limited to 'include/configs')
348 files changed, 12881 insertions, 6211 deletions
diff --git a/include/configs/A3000.h b/include/configs/A3000.h index ca9592c..0a9a1ff 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -52,23 +52,20 @@ #define CONFIG_BOOTDELAY 5 -#if 0 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_FLASH | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_NET | \ - CFG_CMD_PCI ) -#endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> /* @@ -309,7 +306,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h index 821efe5..4632991 100644 --- a/include/configs/ADCIOP.h +++ b/include/configs/ADCIOP.h @@ -59,21 +59,32 @@ #define CONFIG_IPADDR 10.0.18.222 #define CONFIG_SERVERIP 10.0.18.190 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -185,7 +196,7 @@ */ #define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */ #define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h index 2efca10..77938b1 100644 --- a/include/configs/ADNPESC1.h +++ b/include/configs/ADNPESC1.h @@ -401,15 +401,8 @@ #define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */ #define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */ -#define __SPI_CMD_OFF 0 /* allow default commands: */ - /* CFG_CMD_SPI */ - /* CFG_CMD_DATE */ - #else #undef CONFIG_NIOS_SPI /* NO SPI support */ -#define __SPI_CMD_OFF ( CFG_CMD_SPI \ - | CFG_CMD_DATE \ - ) #endif /*------------------------------------------------------------------------ @@ -570,45 +563,55 @@ #define CONFIG_POST CFG_POST_RTC #define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_MMC | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_SCSI | \ - CFG_CMD_VFD | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG | \ - __SPI_CMD_OFF ) ) - - -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_XIMG + +#if (CFG_NIOS_CPU_SPI_NUMS != 1) +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_DATE +#endif /*------------------------------------------------------------------------ * KGDB *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 9600 #endif @@ -651,7 +654,6 @@ #undef CFG_LOAD_ADDR /* force error break */ #endif - /* MEM test area */ #if (CFG_SDRAM_SIZE != 0) diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h index df20965..2ee8c61 100644 --- a/include/configs/ADS860.h +++ b/include/configs/ADS860.h @@ -37,13 +37,19 @@ #define CONFIG_DRAM_50MHZ 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_PCMCIA \ - | CFG_CMD_PING \ - ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_PING + +/* This is picked up again in fads.h */ +#define FADS_COMMANDS_ALREADY_DEFINED #include "fads.h" diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h index 14d56bf..6f64038 100644 --- a/include/configs/AMX860.h +++ b/include/configs/AMX860.h @@ -61,7 +61,25 @@ #undef CONFIG_BOOTARGS -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + + +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -70,29 +88,22 @@ #endif -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) - -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_SUBNETMASK -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -196,7 +207,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index ba4b1a2..d25aa74 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -66,18 +66,28 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_IRQ | \ - CFG_CMD_MVENV | \ - CFG_CMD_PCI | \ - CFG_CMD_PING \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MVENV +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -89,7 +99,7 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -188,7 +198,7 @@ */ #define CFG_DCACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -228,7 +238,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 3df99a0..f6495e4 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -67,27 +67,38 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -106,7 +117,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -266,7 +277,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 1cd0280..0f301ec 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -71,17 +71,29 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -92,7 +104,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -207,7 +219,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index d03c05b..9e0ee37 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -59,19 +59,31 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -91,7 +103,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -270,7 +282,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 0e6b50f..4304ecc 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -52,15 +52,26 @@ #define CFG_8xx_CPUCLK_MAX 133000000 #endif /* CONFIG_MPC852T */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */ diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h new file mode 100644 index 0000000..a4f7f9a --- /dev/null +++ b/include/configs/AdderUSB.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2006 CodeHermit. + * Bryan O'Donoghue <bodonoghue@codehermit.ie> + * + * Provides support for USB console on the Analogue & Micro Adder87x + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ADDERUSB__ +#define __ADDERUSB__ + +/* Include the board port */ +#include "Adder.h" + +#define CONFIG_USB_DEVICE /* Include UDC driver */ +#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */ +#define CFG_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */ +#define CFG_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */ +#define CFG_CONSOLE_IS_IN_ENV /* Console is in env */ + +/* If you have a USB-IF assigned VendorID then you may wish to define + * your own vendor specific values either in BoardName.h or directly in + * usbd_vendor_info.h + */ + +/* +#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie" +#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot" +#define CONFIG_USBD_VENDORID 0xFFFF +#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF +#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE +*/ + +#endif /* __ADDERUSB_H__ */ diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index c08b2c3..3f2f614 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -39,12 +39,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -70,31 +64,40 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #define CONFIG_NET_MULTI #define CONFIG_MII -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Autobooting */ @@ -282,7 +285,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -298,6 +301,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h index ea50f41..d914dcc 100644 --- a/include/configs/AmigaOneG3SE.h +++ b/include/configs/AmigaOneG3SE.h @@ -56,38 +56,46 @@ #define CONFIG_BOOTARGS "root=/dev/ram rw ramdisk=4096" -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_AMIGA_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_NET | \ - CFG_CMD_IDE | \ - CFG_CMD_FDC | \ - CFG_CMD_CACHE | \ - CFG_CMD_CONSOLE| \ - CFG_CMD_USB | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI ) - -/* CFG_CMD_MII | \ */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NET +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FDC +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CONSOLE| +#define CONFIG_CMD_USB +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI + #define CONFIG_PCI 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - +#define atoi(x) simple_strtoul(x,NULL,10) /* * Miscellaneous configurable options @@ -247,7 +255,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -348,8 +356,6 @@ #define CONFIG_3COM /* #define CONFIG_BOOTP_RANDOM_DELAY */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) /* * USB configuration diff --git a/include/configs/B2.h b/include/configs/B2.h index e55858d..f1411db 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -72,16 +72,26 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C ) +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 #define CONFIG_ETHADDR 00:50:c2:1e:af:fb diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index 46bdfa2..c11e9c9 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -66,14 +66,30 @@ #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 |\ - CFG_CMD_SCSI | CFG_CMD_IDE | CFG_CMD_DATE |\ - CFG_CMD_FDC | CFG_CMD_ELF) +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_FDC +#define CONFIG_CMD_ELF -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -86,7 +102,7 @@ */ #define CONFIG_CONS_INDEX 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -436,7 +452,7 @@ extern unsigned long bab7xx_get_gclk_freq (void); * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index bc30977..5c2bfc9 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -61,11 +61,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -106,12 +101,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#ifdef CONFIG_PCI -# define ADD_PCI_CMD CFG_CMD_PCI -#else -# define ADD_PCI_CMD 0 -#endif - /* * Video console */ @@ -126,12 +115,6 @@ # define CONFIG_SPLASH_SCREEN # define CFG_CONSOLE_IS_IN_ENV -#ifdef CONFIG_VIDEO -# define ADD_BMP_CMD CFG_CMD_BMP -#else -# define ADD_BMP_CMD 0 -#endif - /* * Partitions */ @@ -144,10 +127,7 @@ */ #ifdef CONFIG_BC3450_USB # define CONFIG_USB_OHCI -# define ADD_USB_CMD CFG_CMD_USB # define CONFIG_USB_STORAGE -#else /* !CONFIG_BC3450_USB */ -# define ADD_USB_CMD 0 #endif /* CONFIG_BC3450_USB */ /* @@ -158,66 +138,69 @@ CFG_POST_I2C) #ifdef CONFIG_POST -# define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ # define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -# define CFG_CMD_POST_DIAG 0 #endif /* CONFIG_POST */ -/* - * IDE - */ -#ifdef CONFIG_BC3450_IDE -# define ADD_IDE_CMD CFG_CMD_IDE -#else -# define ADD_IDE_CMD 0 -#endif /* CONFIG_BC3450_IDE */ /* - * Filesystem support + * BOOTP options */ -#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB) -#ifdef CONFIG_FAT -# define ADD_FAT_CMD CFG_CMD_FAT -#else -# define ADD_FAT_CMD 0 -#endif /* CONFIG_FAT */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#ifdef CONFIG_EXT2 -# define ADD_EXT2_CMD CFG_CMD_EXT2 -#else -# define ADD_EXT2_CMD 0 -#endif /* CONFIG_EXT2 */ -#endif /* CONFIG_BC3450_IDE / _USB */ /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_FAT_CMD | \ - ADD_EXT2_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP | \ - CFG_CMD_BSP) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_BSP + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_BC3450_IDE + #define CONFIG_CMD_IDE +#endif + +#if defined(CONFIG_BC3450_IDE) || defined(CONFIG_BC3450_USB) + #ifdef CONFIG_FAT + #define CONFIG_CMD_FAT + #endif + + #ifdef CONFIG_EXT2 + #define CONFIG_CMD_EXT2 + #endif +#endif + +#ifdef CONFIG_BC3450_USB + #define CONFIG_CMD_USB +#endif + +#ifdef CONFIG_PCI + #define CONFIG_CMD_PCI +#endif + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -450,7 +433,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -469,9 +452,13 @@ #define CFG_HZ 1000 /* dec freq: 1ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 3bd43d8..bb7856f 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -64,28 +64,35 @@ #define CFG_DOC_SUPPORT_2000 1 #define CFG_DOC_SUPPORT_MILLENNIUM 1 #define CFG_DOC_SHORT_TIMEOUT 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_ELF | \ - 0 ) -/* CFG_CMD_DOC required legacy NAND support */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DOC +#define CONFIG_CMD_ELF + + +/* CONFIG_CMD_DOC required legacy NAND support */ #define CFG_NAND_LEGACY #if 0 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \ - CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE) - #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ #endif -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - - /* * Miscellaneous configurable options */ @@ -293,7 +300,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index e0262a8..ae32f6b 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -56,13 +56,26 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | \ - CFG_CMD_IRQ | \ - CFG_CMD_EEPROM ) & \ - ~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_EEPROM + +#undef CONFIG_CMD_NET + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -73,7 +86,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -173,7 +186,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 7ec4599..62a2eaa 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -119,24 +119,36 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -155,7 +167,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -413,7 +425,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CCM.h b/include/configs/CCM.h index e8994ff..9f06957 100644 --- a/include/configs/CCM.h +++ b/include/configs/CCM.h @@ -94,27 +94,35 @@ #define CONFIG_MAC_PARTITION /* nod used yet */ #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 1cca285..08ef9b5 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -60,26 +60,35 @@ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ #define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #define CFG_NAND_LEGACY @@ -100,7 +109,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -289,7 +298,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index b882f7a..aea8523 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -54,27 +54,36 @@ #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_FLASH | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP /* @@ -325,7 +334,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 56fd9a6..a3717b9 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -54,16 +54,29 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -80,7 +93,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -216,7 +229,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 047e2f1..0a4e1e9 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -55,30 +55,43 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_EEPROM -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_EEPROM ) #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -96,7 +109,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -260,7 +273,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index d756f44..ceeba6e 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -37,6 +37,7 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ +#undef CONFIG_CPCI405_6U /* enable this for 6U boards */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ @@ -56,28 +57,44 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #if 0 /* test-only */ #define CONFIG_NETCONSOLE @@ -97,9 +114,6 @@ #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -117,7 +131,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -311,7 +325,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 852d94a..1aefbba 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -57,36 +57,49 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY @@ -105,7 +118,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -284,7 +297,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 2260327..e2652e6 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -56,28 +56,44 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #if 0 /* test-only */ #define CONFIG_NETCONSOLE @@ -95,9 +111,6 @@ #undef CONFIG_AUTO_UPDATE /* autoupdate via compactflash */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -115,7 +128,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -314,7 +327,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h index 90d3a8d..318ada1 100644 --- a/include/configs/CPCI440.h +++ b/include/configs/CPCI440.h @@ -33,6 +33,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_CPCI440 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -171,29 +172,27 @@ #define CONFIG_PHY_ADDR 1 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#if 0 /* test-only */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_KGDB | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF ) -#else -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM ) -/* test-only: support fehlt bisher... */ -/* CFG_CMD_IDE | \*/ -/* CFG_CMD_PCI | \*/ -#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -204,7 +203,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -268,7 +267,7 @@ */ #define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -290,7 +289,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index bc23fc0..48e29a2 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -133,29 +133,36 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) - - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ - | CFG_CMD_CACHE \ - | CFG_CMD_EEPROM \ - | CFG_CMD_PCI \ - | CFG_CMD_ELF \ - | CFG_CMD_DATE \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_IDE \ - | CFG_CMD_FAT \ - | CFG_CMD_EXT2 \ - ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + + +#define CONFIG_DOS_PARTITION #define CONFIG_USE_CPCIDVI @@ -179,7 +186,7 @@ #define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -585,7 +592,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index 93d49f3..c7b623a 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -54,15 +54,36 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -73,7 +94,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -189,7 +210,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index 16a9ea5..c589f28 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -68,9 +68,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -163,27 +161,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -348,7 +356,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index ce969ec..b087eba 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -69,9 +69,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -167,27 +165,31 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C #ifdef CONFIG_PCI -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI) -#else /* ! PCI */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C ) -#endif /* CONFIG_PCI */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + #define CONFIG_CMD_PCI +#endif + #define CFG_NAND_LEGACY @@ -196,7 +198,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -369,7 +371,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 63d7a92..a965c12 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -75,38 +75,42 @@ #define CONFIG_AUTOSCRIPT 1 -#define CONFIG_COMMANDS (\ - CFG_CMD_BDI|\ - CFG_CMD_IMI|\ - CFG_CMD_FLASH|\ - CFG_CMD_MEMORY|\ - CFG_CMD_NET|\ - CFG_CMD_ENV|\ - CFG_CMD_CONSOLE|\ - CFG_CMD_ASKENV|\ - CFG_CMD_ECHO|\ - CFG_CMD_IMMAP|\ - CFG_CMD_REGINFO|\ - CFG_CMD_DHCP|\ - CFG_CMD_DATE|\ - CFG_CMD_RUN|\ - CFG_CMD_I2C|\ - CFG_CMD_EEPROM|\ - CFG_CMD_DIAG|\ - CFG_CMD_AUTOSCRIPT|\ - CFG_CMD_SETGETDCR) +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_SETGETDCR + /* - * optional BOOTP / DHCP fields + * BOOTP options */ -#define CONFIG_BOOTP_MASK (\ - CONFIG_BOOTP_VENDOREX|\ - CONFIG_BOOTP_SUBNETMASK|\ - CONFIG_BOOTP_GATEWAY|\ - CONFIG_BOOTP_DNS|\ - CONFIG_BOOTP_HOSTNAME|\ - CONFIG_BOOTP_BOOTFILESIZE|\ - CONFIG_BOOTP_BOOTPATH) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_VENDOREX +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_BOOTFILESIZE + /* * how many time to fail & restart a net-TFTP before giving up & resetting @@ -123,9 +127,6 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ diff --git a/include/configs/CU824.h b/include/configs/CU824.h index acc8484..68e816a 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -55,21 +55,29 @@ #define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */ #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - 0 /* CFG_CMD_DATE */ | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP /* @@ -278,7 +286,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index 997e1ba..627ea14 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -57,32 +57,35 @@ #define CONFIG_IPADDR 10.0.18.222 #define CONFIG_SERVERIP 10.0.18.190 -#if 0 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_BSP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF ) -#else -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP ) -#endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP + #if 0 /* Does not appear to be used?! If it is used, needs to be fixed */ #define CONFIG_SOFT_I2C /* Software I2C support enabled */ #endif #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -184,7 +187,7 @@ */ #define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */ #define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index bd7aff1..db2e96c 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -215,8 +215,16 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + /* * JFFS2 partitions * @@ -239,17 +247,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)" */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ - | CFG_CMD_EEPROM \ - | CFG_CMD_CACHE \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_PCI \ - | CFG_CMD_NET ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + /* * Miscellaneous configurable options @@ -261,7 +272,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" /* #define CFG_GT_DUAL_CPU also for JTAG even with one cpu */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -558,7 +569,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index 4b72e9b..b5d3f77 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -153,8 +153,16 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + /* * JFFS2 partitions * @@ -177,17 +185,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define MTDPARTS_DEFAULT "mtdparts=db64460-1:-(jffs2)" */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ - | CFG_CMD_EEPROM \ - | CFG_CMD_CACHE \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_PCI \ - | CFG_CMD_NET ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + /* * Miscellaneous configurable options @@ -199,7 +210,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" /* #define CFG_GT_DUAL_CPU also for JTAG even with one cpu */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -496,7 +507,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index b58846d..0ddf0e3 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -446,46 +446,55 @@ #define CONFIG_NIOS_ASMI /* Enable ASMI */ #define CFG_NIOS_ASMIBASE CFG_NIOS_CPU_ASMI0 /* ASMI base address */ -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_MMC | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_VFD | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG ) ) - - -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_XIMG + /*------------------------------------------------------------------------ * COMPACT FLASH *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(CONFIG_CMD_IDE) #define CONFIG_IDE_PREINIT /* Implement id_preinit */ #define CFG_IDE_MAXBUS 1 /* 1 IDE bus */ #define CFG_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */ @@ -503,12 +512,12 @@ #define CFG_CF_POWER 0x009209c0 /* CF Power FET PIO base*/ #define CFG_CF_ATASEL 0x009209d0 /* CF ATASEL PIO base */ -#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */ +#endif /*------------------------------------------------------------------------ * KGDB *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 9600 #endif diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 3e3803c..0032fd3 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -454,47 +454,55 @@ #endif /* CFG_NIOS_CPU_PIO_NUMS */ -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_MMC | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_VFD | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG ) ) - - -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_ASKENV +#undef COND_CMD_BEDBUG +#undef COND_CMD_BMP +#undef COND_CMD_BSP +#undef COND_CMD_CACHE +#undef COND_CMD_DATE +#undef COND_CMD_DOC +#undef COND_CMD_DTT +#undef COND_CMD_EEPROM +#undef COND_CMD_ELF +#undef COND_CMD_FAT +#undef COND_CMD_FDC +#undef COND_CMD_FDOS +#undef COND_CMD_HWFLOW +#undef COND_CMD_IDE +#undef COND_CMD_I2C +#undef COND_CMD_JFFS2 +#undef COND_CMD_KGDB +#undef COND_CMD_NAND +#undef COND_CMD_NFS +#undef COND_CMD_MMC +#undef COND_CMD_MII +#undef COND_CMD_PCI +#undef COND_CMD_PCMCIA +#undef COND_CMD_SCSI +#undef COND_CMD_SPI +#undef COND_CMD_VFD +#undef COND_CMD_USB +#undef COND_CMD_XIMG + /*------------------------------------------------------------------------ * KGDB *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 9600 #endif diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 2ae794d..2eadbea 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -55,17 +55,29 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -87,7 +99,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -235,7 +247,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 5489a53..5c595f5 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -58,21 +58,33 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* BQ3285 is MC146818 compatible*/ @@ -85,7 +97,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -225,7 +237,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index 720b335..a8697ec 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -68,17 +68,29 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB)) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_LOADB + #define CONFIG_BOOTDELAY 5 #define CFG_PROMPT "\nEV123 U-Boot> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 2c99b4b..bb77188 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -66,12 +66,25 @@ #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2) +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -84,7 +97,7 @@ */ #define CONFIG_CONS_INDEX 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -317,7 +330,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index e73bcec..f927a2c 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -81,7 +81,15 @@ "" #define CONFIG_BOOTCOMMAND "run ramboot" -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ @@ -91,12 +99,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE + /* * Miscellaneous configurable options @@ -104,7 +115,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "LEOX_elpt860: " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -224,7 +235,7 @@ */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h index 5507f35..cfa6335 100644 --- a/include/configs/EP1C20.h +++ b/include/configs/EP1C20.h @@ -160,25 +160,36 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_BOOTD +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h index 6eca9f2..7c526f7 100644 --- a/include/configs/EP1S10.h +++ b/include/configs/EP1S10.h @@ -154,25 +154,35 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h index 976e79a..1fe8f68 100644 --- a/include/configs/EP1S40.h +++ b/include/configs/EP1S40.h @@ -154,25 +154,35 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h index 738763b..89e0eeb 100644 --- a/include/configs/EP88x.h +++ b/include/configs/EP88x.h @@ -50,15 +50,25 @@ #define CFG_8xx_CPUCLK_MIN 40000000 #define CFG_8xx_CPUCLK_MAX 133000000 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe060000" /* Autoboot command */ diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index c203aea..5d48d2b 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -96,23 +96,26 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH) /* - * #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | \ - * CFG_CMD_KGDB | CFG_CMD_I2C | CFG_CMD_EEPROM | \ - * CFG_CMD_ENV | CFG_CMD_FLASH) + * BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* CFG_CMD_ENV est definie */ -/* ((CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_KGDB) & ~(CFG_CMD_ENV)) + +/* + * Command line configuration. */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -121,7 +124,7 @@ */ #undef CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -325,7 +328,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -365,7 +368,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index b176c6f..66e1203 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -70,10 +70,21 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "BOOT: " /* Monitor Command Prompt */ diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h index d55eb7d..ed439b1 100644 --- a/include/configs/ETX094.h +++ b/include/configs/ETX094.h @@ -82,17 +82,29 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -179,7 +191,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index 78e5716..1c44a0c 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -103,21 +103,30 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ASKENV) +#define CONFIG_CMD_ASKENV -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -391,7 +400,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index d85be42..a3f38bb 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -82,10 +82,21 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -94,7 +105,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -206,7 +217,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index 1b562d6..a562b2f 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -46,7 +46,6 @@ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -/*Now included by CFG_CMD_PCMCIA */ /*#define CONFIG_PCMCIA 1 / * To enable PCMCIA support */ /* Video related */ @@ -105,17 +104,39 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT ":>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -190,7 +211,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index 2a986f0..c8ce259 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -61,15 +61,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #undef CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT ":>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -148,7 +161,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 8babee1..431844c 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -62,21 +62,39 @@ /*#define CONFIG_WATCHDOG*/ /* watchdog enabled */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ -#define CONFIG_COMMANDS (CFG_CMD_BDI | CFG_CMD_IMI | CFG_CMD_CACHE | \ - CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_LOADS | \ - CFG_CMD_ENV | CFG_CMD_REGINFO | CFG_CMD_IMMAP | CFG_CMD_NET) +#define CONFIG_CMD_BDI +#define CONFIG_CMD_IMI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_ENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "EEG> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -152,7 +170,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 0dd21bc..322158c 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -60,24 +60,45 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~( \ - CFG_CMD_CONSOLE | \ - CFG_CMD_BDI | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_CACHE ) ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_CACHE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -160,7 +181,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index 423d74e..f8698b5 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -58,26 +58,45 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -160,7 +179,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/G2000.h b/include/configs/G2000.h index db42fd0..9c713c6 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -88,20 +88,32 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -120,7 +132,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -324,7 +336,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 6613f90..bfbf3a8 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -132,9 +132,12 @@ /* * BOOTP options */ -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE \ - ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + /* * The GEN860T network interface uses the on-chip 10/100 FEC with @@ -222,35 +225,30 @@ CFG_POST_UART | \ CFG_POST_SPR ) -#ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 -#endif /* - * List of available monitor commands. Use the system default list - * plus add some of the "non-standard" commands back in. - * See ./cmd_confdefs.h - */ -#define BASE_CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_FPGA | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_POST_DIAG ) + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_MII +#define CONFIG_CMD_BEDBUG #if !defined(CONFIG_SC) -#define CONFIG_COMMANDS ( BASE_CONFIG_COMMANDS | CFG_CMD_DOC ) -#else -#define CONFIG_COMMANDS BASE_CONFIG_COMMANDS + #define CONFIG_CMD_DOC +#endif + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG #endif /* @@ -279,11 +277,6 @@ #define CFG_FPGA_PROG_FEEDBACK -/************************************************************************ - * This must be included AFTER the definition of any CONFIG_COMMANDS - */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY /* @@ -306,7 +299,7 @@ /* * Set buffer size for console I/O */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 #else #define CFG_CBSIZE 256 @@ -471,7 +464,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of above value */ #endif diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index 8c01d97..785355a 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -105,15 +105,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT ":>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -193,7 +206,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/GTH.h b/include/configs/GTH.h index 03b9659..79f5714 100644 --- a/include/configs/GTH.h +++ b/include/configs/GTH.h @@ -97,18 +97,32 @@ #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_PROMPT "=>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -190,7 +204,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/HH405.h b/include/configs/HH405.h index dc40ebc..00f481c 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -98,26 +98,40 @@ #define CONFIG_VIDEO_BMP_GZIP /* gzip compressed bmp images */ #define CFG_VIDEO_LOGO_MAX_SIZE (2 << 20) /* for decompressed img */ -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 #endif /* CONFIG_VIDEO */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - ADD_BMP_CMD | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + +#ifdef CONFIG_VIDEO +#define CONFIG_CMD_BMP +#endif #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -127,9 +141,6 @@ #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ #undef CONFIG_AUTO_UPDATE_SHOW /* use board show routine */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ @@ -148,7 +159,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -377,7 +388,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 6864740..26dd954 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -52,16 +52,27 @@ #define CONFIG_BAUDRATE 9600 #define CONFIG_DRAM_SPEED 100 /* MHz */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_PCI | \ - CFG_CMD_PING ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING /* * Miscellaneous configurable options @@ -363,7 +374,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h index 7cce876..02ae5d0 100644 --- a/include/configs/HMI10.h +++ b/include/configs/HMI10.h @@ -117,7 +117,15 @@ #define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -125,31 +133,25 @@ #define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ #define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #ifdef CONFIG_SPLASH_SCREEN -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#else -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + #define CONFIG_CMD_BMP #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -164,7 +166,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -247,7 +249,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index f84e356..661b895 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -60,18 +60,30 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -88,7 +100,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -271,7 +283,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h index 35d84ae..bd0894c 100644 --- a/include/configs/IAD210.h +++ b/include/configs/IAD210.h @@ -84,7 +84,15 @@ /* #define CONFIG_STATUS_LED 1*/ /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + # undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ # define CONFIG_FEC_ENET 1 /* use FEC ethernet */ @@ -123,20 +131,23 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -217,7 +228,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index cd17935..27a5bc3 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -81,7 +81,15 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ #define CONFIG_FEC_ENET 1 /* use FEC ethernet */ @@ -123,25 +131,28 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -228,7 +239,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 29eb874..85d2bb3 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -128,9 +128,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -159,24 +157,34 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_SNTP ) +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -234,7 +242,7 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_NAND_LEGACY #define CFG_NAND0_BASE 0xE1000000 @@ -295,7 +303,7 @@ #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x0)) = (__u8)d; } while(0) #define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)(adr + 0x0))) -#endif /* CFG_CMD_NAND */ +#endif /* CONFIG_CMD_NAND */ /*----------------------------------------------------------------------- * Hard Reset Configuration Words @@ -355,7 +363,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -474,7 +482,7 @@ #define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE) |\ ORxG_SCY_6_CLK ) -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) /* Bank 1 - NAND Flash */ #define CFG_NAND_BASE CFG_NAND0_BASE diff --git a/include/configs/IP860.h b/include/configs/IP860.h index 0e20e56..bd961d8 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -88,28 +88,32 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT - -/*----------------------------------------------------------------------*/ +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/*----------------------------------------------------------------------*/ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -202,7 +206,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index c1565fc..6fee455 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -67,8 +67,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -95,7 +94,14 @@ #define CONFIG_8260_CLKIN 66666666 /* in Hz */ #define CONFIG_BAUDRATE 19200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE /* * select i2c support configuration @@ -124,17 +130,18 @@ #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ #endif /* CONFIG_SOFT_I2C */ -#define CONFIG_COMMANDS CONFIG_CMD_DFL -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram rw" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -149,7 +156,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -257,7 +264,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 706bdb9..965b515 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -58,8 +58,7 @@ * for FCC). * * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must - * be defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */ @@ -106,17 +105,28 @@ #define CONFIG_8260_CLKIN 65536000 /* in Hz */ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_REGINFO \ - ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */ diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index a0cb1dd..1142f2a 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -72,24 +72,33 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK \ - ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -182,7 +191,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 46b4d53..bd19dad 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -72,24 +72,32 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK \ - ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -179,7 +187,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 73be069..53261548 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -37,11 +37,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -69,7 +64,6 @@ #define CONFIG_PCI_IO_BUS 0x50000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 -#define ADD_PCI_CMD CFG_CMD_PCI #endif #define CFG_XLB_PIPELINING 1 @@ -80,11 +74,8 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#else /* MPC5100 */ - +#else #define CONFIG_MII 1 -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -93,31 +84,44 @@ #define CONFIG_ISO_PARTITION /* USB */ -#if 1 -#define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 -#endif +#define CFG_OHCI_BE_CONTROLLER +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - ADD_PCI_CMD | \ - ADD_USB_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -312,7 +316,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -328,6 +332,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index ccd1f19..ea3b0b4 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -49,6 +49,7 @@ /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */ #define CONFIG_SYSTEMACE 1 #define CFG_SYSTEMACE_BASE 0xf0000000 +#define CFG_SYSTEMACE_WIDTH 8 #define CONFIG_DOS_PARTITION 1 /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */ @@ -134,20 +135,32 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_FLASH | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PCI | \ - CFG_CMD_PING ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + /* watchdog disabled */ #undef CONFIG_WATCHDOG @@ -166,7 +179,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -271,7 +284,7 @@ */ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405GPr CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -297,7 +310,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 2ad6f06..3644e43 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -38,6 +38,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ @@ -177,23 +178,34 @@ #define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ -/*----------------------------------------------------------------------- - * Console/Commands/Parser - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_PING | \ - CFG_CMD_DIAG | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_PING +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT + /* Include NetConsole support */ #define CONFIG_NETCONSOLE @@ -202,10 +214,6 @@ #define CONFIG_AUTO_COMPLETE 1 #define CFG_ALT_MEMTEST 1 /* use real memory test */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "KaRefDes=> " /* Monitor Command Prompt */ @@ -216,7 +224,7 @@ /*----------------------------------------------------------------------- * Console Buffer *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -262,7 +270,6 @@ #define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE) /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/ #define CFG_PCI_TARGET_INIT /* let board init pci target*/ #define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ @@ -279,7 +286,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */ #endif @@ -291,7 +298,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ #define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 9b950fc..f6c31ea 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -89,7 +89,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -156,32 +164,31 @@ #define CONFIG_POST (CFG_POST_CPU | \ CFG_POST_RTC | \ CFG_POST_I2C) - -#ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 -#endif #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -269,7 +276,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index cd38b0f..e558aa4 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -99,7 +99,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -167,34 +175,33 @@ #define CONFIG_POST (CFG_POST_CPU | \ CFG_POST_RTC | \ CFG_POST_I2C) - -#ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 -#endif #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -281,7 +288,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index e44f1cc..46edd08 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -74,64 +74,68 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) - -#define CONFIG_CMD_MINIMAL 0 -#define CONFIG_CMD_TINY (CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB) -#define CONFIG_CMD_NORMAL (CONFIG_CMD_DFL & ~CFG_CMD_BOOTD & ~CFG_CMD_REISER) -#define CONFIG_CMD_GDB (CONFIG_CMD_NORMAL | CFG_CMD_KGDB) -#define CONFIG_CMD_FULL (CFG_CMD_ALL & ~CFG_CMD_BEDBUG \ - & ~CFG_CMD_BMP \ - & ~CFG_CMD_BSP \ - & ~CFG_CMD_DISPLAY \ - & ~CFG_CMD_DOC \ - & ~CFG_CMD_DTT \ - & ~CFG_CMD_EEPROM \ - & ~CFG_CMD_ELF \ - & ~CFG_CMD_EXT2 \ - & ~CFG_CMD_FDC \ - & ~CFG_CMD_FDOS \ - & ~CFG_CMD_HWFLOW \ - & ~CFG_CMD_I2C \ - & ~CFG_CMD_IDE \ - & ~CFG_CMD_IRQ \ - & ~CFG_CMD_JFFS2 \ - & ~CFG_CMD_KGDB \ - & ~CFG_CMD_MII \ - & ~CFG_CMD_MMC \ - & ~CFG_CMD_NAND \ - & ~CFG_CMD_PCI \ - & ~CFG_CMD_PCMCIA \ - & ~CFG_CMD_REISER \ - & ~CFG_CMD_SCSI \ - & ~CFG_CMD_SPI \ - & ~CFG_CMD_UNIVERSE\ - & ~CFG_CMD_USB \ - & ~CFG_CMD_VFD \ - & ~CFG_CMD_XIMG ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -#if CONFIG_LANTEC >= 2 -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG + +#if !(CONFIG_LANTEC >= 2) + #undef CONFIG_CMD_DATE + #undef CONFIG_CMD_NET #endif + #if CONFIG_LANTEC >= 2 -# define CONFIG_COMMANDS CONFIG_CMD_FULL -#else -# define CONFIG_COMMANDS (CONFIG_CMD_FULL & ~CFG_CMD_DATE & ~CFG_CMD_NET) +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -203,7 +207,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index f0fc013..885a882 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -65,15 +65,31 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 5fd6a95..cc456dc 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -60,17 +60,33 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) | \ - CFG_CMD_MII) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB + + #define CONFIG_BOOTDELAY 5 #define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index cbb3e3b..f2a7644 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -51,16 +51,30 @@ #define CFG_ENV_IS_IN_FLASH 1 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB + -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 #define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/MBX.h b/include/configs/MBX.h index d6e3fb8..d9f2add 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -71,13 +71,27 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS ( CFG_CMD_NET | CONFIG_CMD_DFL | CFG_CMD_SDRAM | \ - CFG_CMD_PCMCIA | CFG_CMD_IDE ) -#define CONFIG_DOS_PARTITION +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_IDE + + +#define CONFIG_DOS_PARTITION /* * Miscellaneous configurable options @@ -88,7 +102,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -187,7 +201,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 0ca0970..69d195d 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -151,7 +151,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 465a4ec..8d7ec59 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -104,6 +104,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_METROBOX 1 /* Board is Metrobox */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ @@ -241,26 +242,33 @@ #define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ -/*----------------------------------------------------------------------- - * Console/Commands/Parser - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_PING | \ - CFG_CMD_DIAG | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT) - -/* tbs 09-March-2005 Removed to be able to use 2nd serial */ -/* CFG_CMD_KGDB | \ */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_PING +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT /* Include NetConsole support */ @@ -271,10 +279,6 @@ #define CONFIG_AUTO_COMPLETE 1 #define CFG_ALT_MEMTEST 1 /* use real memory test */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "MetroBox=> " /* Monitor Command Prompt */ @@ -285,7 +289,7 @@ /*----------------------------------------------------------------------- * Console Buffer *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -331,7 +335,6 @@ #define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE) /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/ #define CFG_PCI_TARGET_INIT /* let board init pci target*/ #define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ @@ -348,7 +351,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */ #endif @@ -360,7 +363,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ #define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 53684ca..dde7742 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -115,25 +115,36 @@ #define CONFIG_BR0_WORKAROUND 1 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_REGINFO ) -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_REGINFO + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -225,7 +236,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 7e57a0f..5b526a0 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -50,41 +50,43 @@ ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ -/*********************************************************** - * Command definitions - ***********************************************************/ -#define MIP405_COMMON_CMDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SAVES | \ - CFG_CMD_BSP ) -#if defined(CONFIG_MIP405T) -#define CONFIG_COMMANDS \ - MIP405_COMMON_CMDS -#else -#define CONFIG_COMMANDS \ - (MIP405_COMMON_CMDS | \ - CFG_CMD_USB | \ - CFG_CMD_DOC ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_BSP + +#if !defined(CONFIG_MIP405T) + #define CONFIG_CMD_USB + #define CONFIG_CMD_DOC #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CFG_NAND_LEGACY @@ -165,7 +167,7 @@ **********************************************************/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -260,7 +262,7 @@ */ #define CFG_DCACHE_SIZE 0x4000 /* For AMCC 405GPr CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -426,7 +428,7 @@ /************************************************************ * Debug support ************************************************************/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ML2.h b/include/configs/ML2.h index d8805ea..f488275 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -76,20 +76,31 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & \ - ~( CFG_CMD_NET | \ - CFG_CMD_RTC | \ - CFG_CMD_PCI | \ - CFG_CMD_I2C \ - ) ) | \ - CFG_CMD_IRQ | \ - CFG_CMD_KGDB | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_JFFS2 ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_JFFS2 + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_RTC +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_I2C + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -102,7 +113,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -195,7 +206,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -236,7 +247,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 6ad2feb..9370c24 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -58,14 +58,31 @@ #endif #define CONFIG_BOOTARGS "console=ttyS0 root=/dev/nfs rw nfsroot=209.128.93.133:/boot nfsaddrs=209.128.93.133:209.128.93.138" #define CONFIG_BOOTDELAY 3 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_ASKENV|CFG_CMD_DATE) + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE + + #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_ETH_ADDR "00:10:18:10:00:06" #define CONFIG_DOS_PARTITION 1 /* MSDOS bootable partitiion support */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> + #include "../board/mousse/mousse.h" /* diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 6195bca..713518d 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -101,8 +101,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -198,59 +197,69 @@ #define CONFIG_BAUDRATE 115200 -#define CFG_EXCLUDE CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_KGDB | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_SNTP | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_USB | \ - CFG_CMD_VFD | \ - CFG_CMD_XIMG +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG #if CONFIG_ADSTYPE == CFG_8272ADS -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_SDRAM | \ - CFG_CMD_I2C | \ - CFG_EXCLUDE ) ) + #undef CONFIG_CMD_SDRAM + #undef CONFIG_CMD_I2C + #elif CONFIG_ADSTYPE >= CFG_PQ2FADS -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_SDRAM | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI | \ - CFG_EXCLUDE ) ) + #undef CONFIG_CMD_SDRAM + #undef CONFIG_CMD_I2C + #undef CONFIG_CMD_PCI + #else -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CMD_CFG_PCI | \ - CFG_EXCLUDE ) ) + #undef CONFIG_CMD_PCI + #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/mtdblock2" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -268,7 +277,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -384,7 +393,7 @@ #endif /* CFG_RAMBOOT */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -397,9 +406,9 @@ #define CFG_BCR 0x100C0000 #define CFG_SIUMCR 0x0A200000 #define CFG_SCCR SCCR_DFBRG01 -#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801) #define CFG_OR0_PRELIM 0xFF800876 -#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801 +#define CFG_BR1_PRELIM (CFG_BCSR | 0x00001801) #define CFG_OR1_PRELIM 0xFFFF8010 /*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 4953b70..14b041e 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -83,8 +83,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -141,40 +140,43 @@ */ #define SPD_EEPROM_ADDRESS 0x50 - #define CONFIG_8260_CLKIN 66000000 /* in Hz */ #define CONFIG_BAUDRATE 115200 - -#define CONFIG_COMMANDS ( CFG_CMD_ALL & ~( \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_SNTP | \ - CFG_CMD_VFD | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG ) ) +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_XIMG /* Define a command string that is automatically executed when no character * is read on the console interface withing "Boot Delay" after reset. @@ -202,21 +204,19 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_NFS */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -231,7 +231,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -283,7 +283,6 @@ #define SDRAM_SPD_ADDR 0x50 - /*----------------------------------------------------------------------- * BR2,BR3 - Base Register * Ref: Section 10.3.1 on page 10-14 @@ -381,7 +380,6 @@ #error "INVALID SDRAM CONFIGURATION" #endif - #define RS232EN_1 0x02000002 #define RS232EN_2 0x01000001 #define FETHIEN 0x08000008 @@ -393,7 +391,6 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */ /* 0x0EB2B645 */ #define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\ @@ -450,13 +447,11 @@ # define CFG_ENV_SIZE 0x200 #endif /* CFG_RAMBOOT */ - #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif - /*----------------------------------------------------------------------- * HIDx - Hardware Implementation-dependent Registers 2-11 *----------------------------------------------------------------------- diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 6976313..81db96f 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -265,7 +265,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 @@ -303,11 +303,11 @@ #endif #define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_MPC83XX_TSEC1 1 +#define CONFIG_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0x1c #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 @@ -341,26 +341,34 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CFG_BASE_COMMANDS ( CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_DHCP \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ - | CFG_CMD_DATE \ - | CFG_CMD_PCI) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_CMDLINE_EDITING 1 -#define CFG_RAMBOOT_COMMANDS (CFG_BASE_COMMANDS & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS)) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PCI #if defined(CFG_RAMBOOT) -#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS -#else -#define CONFIG_COMMANDS CFG_BASE_COMMANDS + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> +#define CONFIG_CMDLINE_EDITING 1 + /* * Miscellaneous configurable options diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h new file mode 100644 index 0000000..376973b --- /dev/null +++ b/include/configs/MPC8323ERDB.h @@ -0,0 +1,583 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83xx family */ +#define CONFIG_MPC832X 1 /* MPC832x CPU specific */ + +#define CONFIG_PCI 1 +#define CONFIG_83XX_GENERIC_PCI 1 + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2_5X1 |\ + HRCWL_CE_PLL_VCO_DIV_2 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X3) + +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* + * System IO Config + */ +#define CFG_SICRL 0x00000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ + +#undef CONFIG_SPD_EEPROM +#if defined(CONFIG_SPD_EEPROM) +/* Determine DDR configuration from I2C interface + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */ +#else +/* Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 64 /* MB */ +#define CFG_DDR_CS0_CONFIG 0x80840101 +#define CFG_DDR_TIMING_0 0x00220802 +#define CFG_DDR_TIMING_1 0x3935d322 +#define CFG_DDR_TIMING_2 0x0f9048ca +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_CLK_CNTL 0x02000000 +#define CFG_DDR_MODE 0x44400232 +#define CFG_DDR_MODE2 0x8000c000 +#define CFG_DDR_INTERVAL 0x03200064 +#define CFG_DDR_CS0_BNDS 0x00000003 +#define CFG_DDR_SDRAM_CFG 0x43080000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00030000 /* memtest region */ +#define CFG_MEMTEST_END 0x03f00000 + +/* + * The reserved memory + */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * SDRAM on the Local Bus + */ +#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8323@0" +#define OF_SOC "soc8323@e0000000" +#define OF_QE "qe@e0100000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0xd0000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" + +#define CONFIG_UEC_ETH1 /* ETH3 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 2 /* UCC3 */ +#define CFG_UEC1_RX_CLK QE_CLK9 +#define CFG_UEC1_TX_CLK QE_CLK10 +#define CFG_UEC1_ETH_TYPE FAST_ETH +#define CFG_UEC1_PHY_ADDR 4 +#define CFG_UEC1_INTERFACE_MODE ENET_100_MII +#endif + +#define CONFIG_UEC_ETH2 /* ETH4 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK16 +#define CFG_UEC2_TX_CLK QE_CLK3 +#define CFG_UEC2_ETH_TYPE FAST_ETH +#define CFG_UEC2_PHY_ADDR 0 +#define CFG_UEC2_INTERFACE_MODE ENET_100_MII +#endif + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U CFG_IBAT2U + +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT4L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT4U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT5L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT5U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT6L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#else +#define CFG_IBAT5L (0) +#define CFG_IBAT5U (0) +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#endif + +/* Nothing in BAT7 */ +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:04:9f:ef:03:01 +#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ +#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8323erdb +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc832x_rdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftp $loadaddr $uboot;" \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index cecb225..f62ca2c 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -423,41 +423,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -468,7 +460,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -498,7 +490,7 @@ */ #define CFG_DCACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ #endif @@ -575,7 +567,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 0460be9..1567fcf 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -432,10 +432,10 @@ #endif #define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 @@ -475,44 +475,35 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C \ - | CFG_CMD_DATE) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_DATE) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_DATE \ - ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ - | CFG_CMD_DATE \ - ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -523,7 +514,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -544,7 +535,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -695,7 +686,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 906339e..44649d0 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -289,6 +289,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} +#define CONFIG_CONSOLE ttyS0 #define CONFIG_BAUDRATE 115200 #define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) @@ -372,20 +373,20 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_NET_MULTI #define CONFIG_MII -#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ +#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ -#define CONFIG_MPC83XX_TSEC1 +#define CONFIG_TSEC1 -#ifdef CONFIG_MPC83XX_TSEC1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#ifdef CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "TSEC0" #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 #define CONFIG_HAS_ETH1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC2_NAME "TSEC1" #define CFG_TSEC2_OFFSET 0x25000 #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 @@ -408,6 +409,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH /* Flash is not usable now */ + #undef CFG_FLASH_CFI_DRIVER #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) #define CFG_ENV_SIZE 0x2000 @@ -416,40 +418,41 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ -/* CONFIG_COMMANDS */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM #ifdef CONFIG_COMPACT_FLASH -#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT) -#else -#define CONFIG_COMMANDS_CF 0 + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT #endif #ifdef CONFIG_PCI -#define CONFIG_COMMANDS_PCI CFG_CMD_PCI -#else -#define CONFIG_COMMANDS_PCI 0 + #define CONFIG_CMD_PCI #endif #ifdef CONFIG_HARD_I2C -#define CONFIG_COMMANDS_I2C CFG_CMD_I2C -#else -#define CONFIG_COMMANDS_I2C 0 + #define CONFIG_CMD_I2C #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CONFIG_COMMANDS_CF | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CONFIG_COMMANDS_I2C | \ - CONFIG_COMMANDS_PCI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_DATE | \ - CFG_CMD_CACHE | \ - CFG_CMD_IRQ) -#include <cmd_confdefs.h> - /* Watchdog */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -469,7 +472,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -492,7 +495,7 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ #endif @@ -617,7 +620,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -628,11 +631,11 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_MPC83XX_TSEC1 +#ifdef CONFIG_TSEC1 #define CONFIG_ETHADDR 00:E0:0C:00:8C:01 #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 #endif @@ -670,9 +673,10 @@ boards, we say we have two, but don't display a message if we find only one. */ " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ - " console=ttyS0," MK_STR(CONFIG_BAUDRATE) + " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE) #define CONFIG_EXTRA_ENV_SETTINGS \ + "console=" MK_STR(CONFIG_CONSOLE) "\0" \ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 79937dc..4b32a14 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -457,41 +457,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -502,7 +494,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -532,7 +524,7 @@ */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ #endif @@ -610,7 +602,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5aeea58..5a7c879 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -366,10 +366,10 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 @@ -407,37 +407,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -448,7 +444,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -469,7 +465,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -481,7 +477,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -520,7 +516,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ - "ramdiskaddr=600000\0" \ + "ramdiskaddr=1000000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ "fdtaddr=400000\0" \ "fdtfile=your.fdt.dtb\0" @@ -540,7 +536,7 @@ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr" + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 418a3a3..0ce25cf 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -212,10 +212,10 @@ #elif defined(CONFIG_TSEC_ENET) #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define TSEC1_PHY_ADDR 7 @@ -259,26 +259,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \ - | CFG_CMD_PCI | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS )) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \ - | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS )) -#endif -#else + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \ - | CFG_CMD_PING | CFG_CMD_I2C ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -288,7 +295,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -308,7 +315,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -320,7 +327,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index fb360d2..50d3b6b 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -373,10 +373,10 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 @@ -401,19 +401,28 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -423,7 +432,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -443,7 +452,7 @@ extern unsigned long get_clock_freq(void); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -455,7 +464,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 4c34308..d0f94a3 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -359,10 +359,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC1" -#define CONFIG_MPC85XX_TSEC3 1 -#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 @@ -392,21 +392,31 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ - | CFG_CMD_BEDBUG \ - | CFG_CMD_NET) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI + #define CONFIG_CMD_BEDBUG + #define CONFIG_CMD_NET #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -416,7 +426,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -436,7 +446,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -448,7 +458,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 680009d..2e84fc8 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -391,14 +391,14 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1" -#define CONFIG_MPC85XX_TSEC3 1 -#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC2" -#undef CONFIG_MPC85XX_TSEC4 -#define CONFIG_MPC85XX_TSEC4_NAME "eTSEC3" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC2" +#undef CONFIG_TSEC4 +#define CONFIG_TSEC4_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 @@ -427,19 +427,28 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -449,7 +458,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -469,7 +478,7 @@ extern unsigned long get_clock_freq(void); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -481,7 +490,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 4c8b4e7..a3025bd 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -373,10 +373,10 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 @@ -401,19 +401,28 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -423,7 +432,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -443,7 +452,7 @@ extern unsigned long get_clock_freq(void); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -455,7 +464,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 21e6637..c10e551 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -43,9 +43,7 @@ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ -#define CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ +#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -349,17 +347,19 @@ #endif /* CONFIG_PCI */ -#if defined(CONFIG_TSEC_ENET) +#ifdef CONFIG_TSEC_ENET #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif +#ifndef CONFIG_MII #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#endif +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 @@ -369,9 +369,10 @@ /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" -#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ +#endif /* CONFIG_TSEC_ENET */ + +#ifdef CONFIG_ETHER_ON_FCC /* CPM FCC Ethernet */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ @@ -392,7 +393,10 @@ #define FETH3_RST 0x80 #endif /* CONFIG_ETHER_INDEX */ -#define CONFIG_MII /* MII PHY management */ +#ifndef CONFIG_MII +#define CONFIG_MII 1 /* MII PHY management */ +#endif + #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ /* @@ -432,46 +436,36 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & ~(CFG_CMD_ENV)) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -482,7 +476,7 @@ #define CFG_LOAD_ADDR 0x1000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -503,7 +497,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -515,7 +509,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -553,9 +547,11 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" + "consoledev=ttyCPM\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8560ads.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -563,14 +559,16 @@ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 3f65644..eef168c 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -353,12 +353,12 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1" -#undef CONFIG_MPC85XX_TSEC3 -#undef CONFIG_MPC85XX_TSEC4 +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" +#undef CONFIG_TSEC3 +#undef CONFIG_TSEC4 #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 2 @@ -383,19 +383,29 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -405,7 +415,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -425,7 +435,7 @@ extern unsigned long get_clock_freq(void); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -437,7 +447,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index bbe3505..64dcbd0 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -46,8 +46,10 @@ #define CFG_RESET_ADDRESS 0xfff00100 -/*#undef CONFIG_PCI*/ -#define CONFIG_PCI +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ +#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -76,6 +78,9 @@ #define L2_ENABLE (L2CR_L2E) #ifndef CONFIG_SYS_CLK_FREQ +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) #endif @@ -93,6 +98,9 @@ #define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) + /* * DDR Setup */ @@ -232,7 +240,7 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -296,9 +304,9 @@ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 -#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xe2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ /* PCI view of System Memory */ #define CFG_PCI_MEMORY_BUS 0x00000000 @@ -311,10 +319,10 @@ #define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CFG_PCI2_IO_BASE 0xe3000000 -#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xe3000000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) @@ -330,12 +338,43 @@ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP +/************************************************************ + * USB support + ************************************************************/ +#define CONFIG_PCI_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_KEYBOARD 1 +#define CFG_DEVICE_DEREGISTER +#define CFG_USB_EVENT_POLL 1 +#define CFG_USB_OHCI_SLOT_NAME "ohci_pci" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #if !defined(CONFIG_PCI_PNP) #define PCI_ENET0_IOADDR 0xe0000000 #define PCI_ENET0_MEMADDR 0xe0000000 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ #endif +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CFG_PCI2_IO_PHYS + +/*PCI video card used*/ +/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ + +/* video */ +#define CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +/*#define CONFIG_CONSOLE_CURSOR*/ +#define CFG_ISA_IO_BASE_ADDRESS CFG_PCI2_IO_PHYS +#endif + #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_DOS_PARTITION @@ -349,6 +388,8 @@ #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE #endif +#define CONFIG_MPC86XX_PCI2 + #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) @@ -359,14 +400,14 @@ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC86XX_TSEC1 1 -#define CONFIG_MPC86XX_TSEC1_NAME "eTSEC1" -#define CONFIG_MPC86XX_TSEC2 1 -#define CONFIG_MPC86XX_TSEC2_NAME "eTSEC2" -#define CONFIG_MPC86XX_TSEC3 1 -#define CONFIG_MPC86XX_TSEC3_NAME "eTSEC3" -#define CONFIG_MPC86XX_TSEC4 1 -#define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 @@ -396,20 +437,20 @@ * 0xa000_0000 512M PCI-Express 2 Memory * Changed it for operating from 0xd0000000 */ -#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ +#define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT1U CFG_DBAT1U /* * BAT2 512M Cache-inhibited, guarded * 0xc000_0000 512M RapidIO Memory */ -#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ +#define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) -#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT2U CFG_DBAT2U /* @@ -428,10 +469,10 @@ * 0xe300_0000 16M PCI-Express 2 I/0 * Note that this is at 0xe0000000 */ -#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ +#define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) -#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT4U CFG_DBAT4U /* @@ -463,8 +504,8 @@ */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x60000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ @@ -475,39 +516,34 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C \ - | CFG_CMD_SCSI \ - | CFG_CMD_EXT2) \ - & \ - ~(CFG_CMD_ENV)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_SCSI \ - | CFG_CMD_EXT2) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV +#endif + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI + #define CONFIG_CMD_SCSI + #define CONFIG_CMD_EXT2 #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -518,7 +554,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -539,8 +575,8 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#if defined(CONFIG_CMD_KGDB) + #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif /* @@ -551,9 +587,9 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#if defined(CONFIG_CMD_KGDB) + #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ + #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* @@ -577,6 +613,7 @@ #define CONFIG_HOSTNAME unknown #define CONFIG_ROOTPATH /opt/nfsroot #define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -592,10 +629,17 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ - "dtbaddr=400000\0" \ + "dtbaddr=c00000\0" \ "dtbfile=mpc8641_hpcn.dtb\0" \ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index da52e0e..f8cf01e 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -52,11 +52,20 @@ #define CONFIG_BOOTDELAY 5 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> /* @@ -280,7 +289,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 88eefa1..0defafe 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -76,15 +76,44 @@ #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 60 -#define CONFIG_COMMANDS ( CFG_CMD_ASKENV | CFG_CMD_BOOTD | CFG_CMD_CACHE | CFG_CMD_DHCP | \ - CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \ - CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN ) +/* + * Command line configuration. + */ + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_RUN -#define CONFIG_BOOTP_MASK ( 0xffffffff ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET + /* * Miscellaneous configurable options @@ -310,7 +339,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index 5995918..75efd1e 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -63,27 +63,36 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_VENDOREX ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_VENDOREX #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -/* MVsensor uses a really minimal U-Boot ! */ -#define CONFIG_COMMANDS (CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_DHCP | \ - CFG_CMD_ENV | \ - CFG_CMD_BOOTD | \ - CFG_CMD_RUN ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_RUN + /* * Miscellaneous configurable options @@ -96,7 +105,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -172,7 +181,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NC650.h b/include/configs/NC650.h index a12c8da..c051a35 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -85,7 +85,15 @@ #undef CONFIG_STATUS_LED /* Status LED disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_FEC_ENET 1 /* use FEC ethernet */ #define FEC_ENET @@ -134,25 +142,28 @@ #define CONFIG_RTC_PCF8563 #define CFG_I2C_RTC_ADDR 0x51 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_NAND | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NAND +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -230,7 +241,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index 444f721..bb3d19d 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -82,7 +82,15 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -105,20 +113,22 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_MII | \ - CFG_CMD_CDP \ - ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_CDP + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -128,7 +138,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -220,7 +230,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 25b6345..19743c0 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -77,7 +77,16 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -111,26 +120,28 @@ CFG_POST_CODEC | \ CFG_POST_DSP ) -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CDP | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_PING | \ - 0) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_PING + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -140,7 +151,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -223,7 +234,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index e20e724..fb8085d 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -82,7 +82,16 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -105,20 +114,22 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_MII | \ - CFG_CMD_CDP \ - ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_CDP + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -128,7 +139,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -220,7 +231,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index e30be09..d4cb9e7 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -81,35 +81,45 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS_BASE ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 -#define CONFIG_COMMANDS (CONFIG_COMMANDS_BASE | CFG_CMD_NAND) -#else -#define CONFIG_COMMANDS CONFIG_COMMANDS_BASE +#define CONFIG_CMD_NAND #endif + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -192,7 +202,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index d994420..4cd4472 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -84,7 +84,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -93,16 +101,19 @@ #define CONFIG_ISP1362_USB /* ISP1362 USB OTG controller */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -117,7 +128,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -201,7 +212,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NX823.h b/include/configs/NX823.h index 1cb8b8f..524aa06 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -55,22 +55,35 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled, for now */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_AUTOSCRIPT) #define CONFIG_AUTOSCRIPT +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_AUTOSCRIPT + + /* call various generic functions */ #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -152,7 +165,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index aa9d1ba..5840ea2 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -54,20 +54,32 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -77,7 +89,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -215,7 +227,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index 2e7c505..937df22 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -54,20 +54,32 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -77,7 +89,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -213,7 +225,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/OXC.h b/include/configs/OXC.h index 787407c..8d61bcd 100644 --- a/include/configs/OXC.h +++ b/include/configs/OXC.h @@ -51,10 +51,23 @@ #define CONFIG_BAUDRATE 9600 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + /* * Miscellaneous configurable options @@ -299,7 +312,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index a933e1b..ef970f1 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -120,30 +120,40 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_UNIVERSE| \ - CFG_CMD_BSP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_UNIVERSE +#define CONFIG_CMD_BSP + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -396,7 +406,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PATI.h b/include/configs/PATI.h index d88fff3..0de7591 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -39,14 +39,35 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | \ - CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ENV | CFG_CMD_REGINFO | \ - CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_RUN | CFG_CMD_BSP | \ - CFG_CMD_IMI | CFG_CMD_EEPROM | CFG_CMD_IRQ | CFG_CMD_MISC \ -) -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_ENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_BSP +#define CONFIG_CMD_IMI +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MISC + #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -71,7 +92,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "pati=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 027dd22..d6e7082 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -68,17 +68,29 @@ #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -97,7 +109,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -244,7 +256,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h index 3a7f7f0..24b25d9 100644 --- a/include/configs/PCI5441.h +++ b/include/configs/PCI5441.h @@ -122,22 +122,32 @@ #define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) #define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index 3a97fbc..268b034 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -53,30 +53,37 @@ #define CONFIG_PREBOOT "" #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_ELF | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY /* @@ -223,7 +230,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 130beb7..250b586 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -53,32 +53,39 @@ #define CONFIG_PREBOOT "" #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_ELF | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SCSI | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_SNTP #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY /* @@ -225,7 +232,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 806e95f..efa0157 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -40,33 +40,42 @@ ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ -/*********************************************************** - * Command definitions - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_IDE | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_CACHE | \ - CFG_CMD_IRQ | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO | \ - CFG_CMD_FDC | \ - CFG_CMD_SCSI | \ - CFG_CMD_FAT | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_USB | \ - CFG_CMD_MII | \ - CFG_CMD_SDRAM | \ - CFG_CMD_DOC | \ - CFG_CMD_PING | \ - CFG_CMD_SAVES | \ - CFG_CMD_BSP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FDC +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_USB +#define CONFIG_CMD_MII +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_DOC +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_BSP + #define CFG_NAND_LEGACY @@ -150,7 +159,7 @@ **********************************************************/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -227,7 +236,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -366,7 +375,7 @@ /************************************************************ * Debug support ************************************************************/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 83a7ec2..d90351a 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -160,30 +160,41 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * COMPACT FLASH *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(CONFIG_CMD_IDE) #define CONFIG_IDE_PREINIT /* Implement id_preinit */ #define CFG_IDE_MAXBUS 1 /* 1 IDE bus */ #define CFG_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */ @@ -201,12 +212,12 @@ #define CFG_CF_POWER 0x00900890 /* CF Power FET PIO base*/ #define CFG_CF_ATASEL 0x009008a0 /* CF ATASEL PIO base */ -#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */ +#endif /*------------------------------------------------------------------------ * JFFS2 *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS_CUSTOM_PART /* board defined part */ #endif diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index d02c39b..5470373 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -61,19 +61,34 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -83,9 +98,6 @@ #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ #define CONFIG_AUTO_UPDATE_SHOW 1 /* use board show routine */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -104,7 +116,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -331,7 +343,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 7d91a01..5ba8f4a 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -40,11 +40,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -77,12 +72,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #undef CONFIG_NS8382X -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -91,39 +80,48 @@ /* USB */ #if 1 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif -#if defined(CONFIG_BOOT_ROM) -#define ADD_DOC_CMD 0 -#else -#define ADD_DOC_CMD CFG_CMD_DOC +#if !defined(CONFIG_BOOT_ROM) /* DoC requires legacy NAND for now */ #define CFG_NAND_LEGACY #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_DOC_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +#if !defined(CONFIG_BOOT_ROM) +#define CONFIG_CMD_DOC +#endif + +#if defined(CONFIG_MPC5200) +#define CONFIG_CMD_PCI +#endif + /* * Autobooting @@ -294,7 +292,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -310,6 +308,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 88fdb51..c80b153 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -103,8 +103,7 @@ * - CONFIG_NET_MULTI must be defined * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #define CONFIG_NET_MULTI #undef CONFIG_ETHER_NONE /* define if ether on something else */ @@ -152,33 +151,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP #ifdef CONFIG_PCI -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) -#else /* ! PCI */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#endif /* CONFIG_PCI */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_PCI +#endif + #define CFG_NAND_LEGACY @@ -197,7 +197,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -345,7 +345,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 37ee977..8f5be5f 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -103,8 +103,7 @@ * - CONFIG_NET_MULTI must be defined * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #define CONFIG_NET_MULTI #undef CONFIG_ETHER_NONE /* define if ether on something else */ @@ -152,33 +151,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP #ifdef CONFIG_PCI -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) -#else /* ! PCI */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#endif /* CONFIG_PCI */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_PCI +#endif + /* * Disk-On-Chip configuration @@ -196,7 +196,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -338,7 +338,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 4fb5440..dbf9422 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -262,10 +262,10 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 @@ -303,43 +303,36 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_MII \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -350,7 +343,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -372,7 +365,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -384,7 +377,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 87ab934..6bdfa5d 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -258,10 +258,10 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 @@ -306,41 +306,35 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -351,7 +345,7 @@ #define CFG_LOAD_ADDR 0x1000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -373,7 +367,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -385,7 +379,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 6e0bd7f..b29f368 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -63,25 +63,37 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_I2C | \ - CFG_CMD_PING | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_UNIVERSE +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -100,7 +112,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -263,7 +275,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PN62.h b/include/configs/PN62.h index a717659..72acf5a 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -42,15 +42,29 @@ #define CONFIG_CONS_INDEX 1 -#define REMOVE_COMMANDS ( CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_LOADS | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMLS ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_BSP + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS -#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~REMOVE_COMMANDS) |\ - CFG_CMD_PCI |\ - CFG_CMD_BSP) #define CONFIG_BAUDRATE 19200 /* console baudrate */ @@ -82,10 +96,6 @@ "loadp 200000; bootm" #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - - /* * Miscellaneous configurable options */ @@ -287,7 +297,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 16e2cc6..dd1decd 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -113,26 +113,38 @@ #endif #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_M41T11 1 /* uses a M41T00 RTC */ @@ -162,7 +174,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -446,7 +458,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/QS823.h b/include/configs/QS823.h index 235bc48..3657fea 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -189,27 +189,37 @@ #undef CONFIG_STATUS_LED /* Status LED disabled */ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_DATE | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_RUN) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_RUN + /*----------------------------------------------------------------------- * Environment variable storage is in FLASH, one sector before U-boot @@ -228,7 +238,7 @@ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -303,7 +313,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 967582b..3db539f 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -189,27 +189,37 @@ #undef CONFIG_STATUS_LED /* Status LED disabled */ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_DATE | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_RUN) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_RUN + /*----------------------------------------------------------------------- * Environment variable storage is in FLASH, one sector before U-boot @@ -228,7 +238,7 @@ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -303,7 +313,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 32faa61..b3442de 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -92,23 +92,33 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_NET | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE /* TODO */ @@ -136,7 +146,7 @@ CONFIG_SPI #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -210,7 +220,7 @@ CONFIG_SPI * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 82228c0..516ec64 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -79,7 +79,14 @@ #define CONFIG_CAN_DRIVER /* CAN Driver support enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -111,20 +118,23 @@ #define CFG_I2C_KEY_ADDR 0x9 /* Keyboard coprocessor */ #define CFG_I2C_TEM_ADDR 0x49 /* Temperature Sensors */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BMP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -134,7 +144,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -228,7 +238,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 242c837..2f6de81 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -79,7 +79,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -94,42 +102,45 @@ #define CFG_EEPROM_WRITE_BITS 4 #define CFG_EEPROM_WRITE_DELAY_MS 10 -#define CONFIG_COMMANDS ( CFG_CMD_ALL & \ - ~CFG_CMD_BSP & \ - ~CFG_CMD_DATE & \ - ~CFG_CMD_DISPLAY& \ - ~CFG_CMD_DTT & \ - ~CFG_CMD_EXT2 & \ - ~CFG_CMD_FDC & \ - ~CFG_CMD_FDOS & \ - ~CFG_CMD_HWFLOW & \ - ~CFG_CMD_IDE & \ - ~CFG_CMD_IRQ & \ - ~CFG_CMD_JFFS2 & \ - ~CFG_CMD_MII & \ - ~CFG_CMD_MMC & \ - ~CFG_CMD_NAND & \ - ~CFG_CMD_PCI & \ - ~CFG_CMD_PCMCIA & \ - ~CFG_CMD_REISER & \ - ~CFG_CMD_SCSI & \ - ~CFG_CMD_SETGETDCR & \ - ~CFG_CMD_SNTP & \ - ~CFG_CMD_SPI & \ - ~CFG_CMD_UNIVERSE & \ - ~CFG_CMD_USB & \ - ~CFG_CMD_VFD & \ - ~CFG_CMD_XIMG ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -205,7 +216,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index 591382c..793b1db 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -88,15 +88,26 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ -#define CONFIG_COMMANDS ((CFG_CMD_ALL & ~CFG_CMD_NONSTD) | CFG_CMD_ELF) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -104,7 +115,7 @@ #define CFG_RESET_ADDRESS 0x80000000 #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -182,7 +193,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFF000000 -#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -222,7 +233,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 48ada0e..3c5e6b8 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -62,17 +62,28 @@ #define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -154,7 +165,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index 3102547..872765c 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -115,29 +115,36 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you don't want the advanced function */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DHCP + #ifdef CONFIG_SPLASH_SCREEN -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_REGINFO | \ - CFG_CMD_DHCP ) -#else -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_REGINFO | \ - CFG_CMD_DHCP ) -#endif /* CONFIG_SPLASH_SCREEN */ +#define CONFIG_CMD_BMP +#endif + /* test-only */ #define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ @@ -147,16 +154,13 @@ #endif /* 1 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "u-boot>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -200,7 +204,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFF000000 -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -239,7 +243,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 45907aa..dfadd2a 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -91,8 +91,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ @@ -150,13 +149,28 @@ /* Monitor Command Prompt */ #define CFG_PROMPT "=> " -/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO & \ - ~CFG_CMD_KGDB ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_KGDB + /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 @@ -176,13 +190,10 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -310,7 +321,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 3885bcd..1e6e8c0 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -92,7 +92,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -135,23 +143,26 @@ #endif /* CONFIG_SOFT_I2C */ -#define CONFIG_COMMANDS ( ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_DATE ) & \ - ~( CFG_CMD_PCMCIA | \ - CFG_CMD_IDE ) ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE + +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_IDE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -228,7 +239,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index dbc57e8..d7652fa 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -62,8 +62,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -125,22 +125,33 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm FE040000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -158,7 +169,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -184,7 +195,7 @@ #define CFG_DIRECT_FLASH_TFTP -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS #define CFG_JFFS2_SORT_FRAGMENTS @@ -205,7 +216,7 @@ #define MTDIDS_DEFAULT "nor0=rattler-0" #define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)" */ -#endif /* CFG_CMD_JFFS2 */ +#endif /* CONFIG_CMD_JFFS2 */ #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) @@ -256,7 +267,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index f8e3397..f2c3699 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -338,28 +338,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) - #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -368,7 +377,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "SBC8540=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -389,7 +398,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -401,7 +410,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/SCM.h b/include/configs/SCM.h index e263db6..f900968 100644 --- a/include/configs/SCM.h +++ b/include/configs/SCM.h @@ -133,8 +133,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. * * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the * X.29 connector, and FCC2 is hardwired to the X.1 connector) @@ -191,23 +190,33 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_BSP) +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_BSP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -353,7 +362,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h index 61896d0..4d9d41b 100644 --- a/include/configs/SL8245.h +++ b/include/configs/SL8245.h @@ -53,11 +53,22 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#include <cmd_confdefs.h> +#define CONFIG_CMD_PCI /* @@ -255,7 +266,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 4977629..41a54f0 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -68,23 +68,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) && defined(KGDB_DEBUG) +#if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -167,7 +178,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h new file mode 100644 index 0000000..a5d3d69 --- /dev/null +++ b/include/configs/SMN42.h @@ -0,0 +1,206 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Configuation settings for the SMN42 board from Siemens. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start u-boot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#undef CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ +#define CONFIG_LPC2292 +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* this would be 0xAE if E0, E1 and E2 were pulled high */ +#define CFG_I2C_SLAVE 0xA0 +#define CFG_I2C_EEPROM_ADDR (0xA0 >> 1) +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/* not used but required by devices.c */ +#define CFG_I2C_SPEED 10000 + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define SCL 0x00000004 /* P0.2 */ +#define SDA 0x00000008 /* P0.3 */ + +#define I2C_READ ((GET32(IO0PIN) & SDA) ? 1 : 0) +#define I2C_SDA(x) { if (x) PUT32(IO0SET, SDA); else PUT32(IO0CLR, SDA); } +#define I2C_SCL(x) { if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); } +#define I2C_DELAY { udelay(100); } +#define I2C_ACTIVE { unsigned int i2ctmp; \ + i2ctmp = GET32(IO0DIR); \ + i2ctmp |= SDA; \ + PUT32(IO0DIR, i2ctmp); } +#define I2C_TRISTATE { unsigned int i2ctmp; \ + i2ctmp = GET32(IO0DIR); \ + i2ctmp &= ~SDA; \ + PUT32(IO0DIR, i2ctmp); } +#endif /* CONFIG_SOFT_I2C */ + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PING + + +#define CONFIG_DOS_PARTITION + +#define CONFIG_BOOTDELAY 5 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "SMN42 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x81800000 /* memtest works on */ +#define CFG_MEMTEST_END 0x83000000 /* 24 MB in SRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ + /* for uClinux img is here*/ + +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_HZ 2048 /* decrementer freq in Hz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SRAM */ +#define PHYS_SDRAM_1 0x81000000 /* SRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB SRAM */ + +/* This is the external flash */ +#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* + * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present. + */ +#define CFG_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 } +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2AA +#define CFG_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ + +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +#define CFG_ENV_IS_IN_FLASH 1 +/* The Environment Sector is in the CPU-internal flash */ +#define CFG_FLASH_BASE 0 +#define CFG_ENV_OFFSET 0x3C000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_MMC 1 +/* we use this ethernet chip */ +#define CONFIG_ENC28J60 + +#endif /* __CONFIG_H */ diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index ae4dcc2..395c7a1 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -59,15 +59,29 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS \ -((CONFIG_CMD_DFL & ~(CFG_CMD_FLASH)) | CFG_CMD_IDE) /* no Flash, but IDE */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + +#undef CONFIG_CMD_FLASH + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /*----------------------------------------------------------------------*/ #define CONFIG_ETHADDR 00:D0:93:00:01:CB @@ -82,7 +96,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -160,7 +174,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/SX1.h b/include/configs/SX1.h index 6ed98b8..05cef87 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -93,12 +93,26 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | \ - CFG_CMD_I2C ) & \ - ~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET + + #include <configs/omap1510.h> #define CONFIG_BOOTARGS "mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw" diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index a8454d9..8f2a5ec 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -146,14 +146,26 @@ #define CFG_DISCOVER_PHY -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE + #define CFG_JFFS2_SORT_FRAGMENTS @@ -226,7 +238,7 @@ */ #define CFG_LONGHELP /* undef to save a little memory */ #define CFG_PROMPT "=>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -309,7 +321,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index f4339ec..5bbe3c5 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -80,18 +80,30 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_SDRAM | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP + #define CONFIG_DRAM_SPEED 100 /* MHz */ @@ -384,7 +396,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index d42bd69..a08451e 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -51,17 +51,28 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP /* @@ -363,7 +374,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 119bc24..2b2ae01 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -50,20 +50,34 @@ #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C ) & \ - ~(CFG_CMD_NET)) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET + + #define CONFIG_BOOTDELAY 3 #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index b42cfb6..1c6a9ae 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -42,11 +42,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -72,12 +67,6 @@ #define CFG_CONSOLE_IS_IN_ENV #endif -#ifdef CONFIG_VIDEO -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -85,7 +74,6 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* POST support */ @@ -94,41 +82,51 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif -/* IDE */ -#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) /* - * Supported commands + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP | \ - CFG_CMD_BSP) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_USB + +#ifdef CONFIG_VIDEO +#define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_POST +#define CONFIG__CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -207,7 +205,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ @@ -394,7 +392,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -403,6 +401,11 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* Enable an alternate, more extensive memory test */ #define CFG_ALT_MEMTEST @@ -414,8 +417,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 1cc9ce9..7240ce1 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -50,11 +50,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -81,12 +76,6 @@ # define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS # define CONFIG_PCI_IO_SIZE 0x01000000 -# define ADD_PCI_CMD CFG_CMD_PCI - -#else /* no Evaluation board */ - -# define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* USB */ @@ -99,49 +88,49 @@ # else # define CONFIG_USB_CONFIG 0x00001000 # endif -# define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT # define CONFIG_DOS_PARTITION # define CONFIG_USB_STORAGE -#else - -# define ADD_USB_CMD 0 - #endif /* IDE */ #if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) - -# define ADD_IDE_CMD CFG_CMD_IDE | CFG_CMD_FAT # define CONFIG_DOS_PARTITION +#endif -#else -# define ADD_IDE_CMD 0 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#endif /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - ADD_IDE_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_REGINFO + +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_USB +#define CONFIG_CMD_PCI +#endif + /* * MUST be low boot - HIGHBOOT is not supported anymore @@ -336,7 +325,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -352,6 +341,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + #ifdef CONFIG_EVAL5200 /* M48T08 is available with the Evaluation board only */ #define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */ #define RTC(reg) (0xf0010000+reg) diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 2344b96..66f7a11 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -107,30 +107,28 @@ */ #define CFG_MATCH_PARTIAL_CMD + /* - * List of available monitor commands. Use the system default list - * plus add some of the "non-standard" commands back in. - * See ./cmd_confdefs.h - */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG \ - ) + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_BEDBUG + #define CONFIG_AUTOSCRIPT 1 #define CFG_LOADS_BAUD_CHANGE 1 #undef CONFIG_LOADS_ECHO /* NO echo on for serial download */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ @@ -141,7 +139,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -239,7 +237,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif @@ -411,10 +409,11 @@ /* * BOOTP options */ -#undef CONFIG_BOOTP_MASK -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE \ - ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE /* diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 7935593..3d98500 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -44,14 +44,9 @@ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -105,12 +100,6 @@ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ -#ifdef CONFIG_PCI -#define ADD_PCI_CMD CFG_CMD_PCI -#else -#define ADD_PCI_CMD 0 -#endif - /* * Video console */ @@ -133,11 +122,6 @@ #define CFG_CONSOLE_IS_IN_ENV #endif /* #ifndef CONFIG_TQM5200S */ -#ifdef CONFIG_VIDEO -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 -#endif /* Partitions */ #define CONFIG_MAC_PARTITION @@ -146,11 +130,17 @@ /* USB */ #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) -#define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #endif #ifndef CONFIG_CAM5200 @@ -161,44 +151,61 @@ #endif #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif -/* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300) -#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) -#else -#define ADD_IDE_CMD 0 -#endif /* - * Supported commands + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP | \ - CFG_CMD_BSP) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_BSP + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_PCI +#define CONFIG_CMD_CMD_PCI +#endif + +#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300) + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) + #define CONFIG_CFG_USB + #define CONFIG_CFG_FAT +#endif + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -234,15 +241,21 @@ #ifndef CONFIG_CAM5200 #define CUSTOM_ENV_SETTINGS \ "bootfile=/tftpboot/tqm5200/uImage\0" \ + "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \ + "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" #else -#define CUSTOM_ENV_SETTINGS \ +#define CUSTOM_ENV_SETTINGS \ "bootfile=cam5200/uImage\0" \ "u-boot=cam5200/u-boot.bin\0" \ "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttyS0\0" \ + "kernel_addr=200000\0" \ + "fdt_addr=400000\0" \ + "hostname=tqm5200\0" \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -252,13 +265,17 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate}\0" \ + "console=${console},${baudrate}\0" \ "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ - "bootm\0" \ + "net_nfs=tftp ${kernel_addr} ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \ + "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \ + "run nfsargs addip addcons;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ ENV_UPDT \ @@ -556,7 +573,12 @@ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -576,8 +598,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -676,4 +697,18 @@ /* Interval between registers */ #define CFG_ATA_STRIDE 4 +/*----------------------------------------------------------------------- + * Open firmware flat tree support + *----------------------------------------------------------------------- + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + #endif /* __CONFIG_H */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 247f705..2bdcf2c 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -88,34 +88,38 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #ifdef CONFIG_SPLASH_SCREEN -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#else -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + #define CONFIG_CMD_BMP #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -129,7 +133,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -212,7 +216,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 1461b5f..58bc5d3 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -88,23 +88,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -118,7 +129,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -202,7 +213,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index ffd5c0b..3b78323 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -167,8 +167,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. * * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the * X.29 connector, and FCC2 is hardwired to the X.1 connector) @@ -220,17 +219,28 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -244,7 +254,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -385,7 +395,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 925bf34..50f6752 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -97,10 +97,6 @@ /* enable I2C and select the hardware/software driver */ #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define ADD_CMD_I2C CFG_CMD_I2C | \ - CFG_CMD_DATE |\ - CFG_CMD_DTT |\ - CFG_CMD_EEPROM #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F @@ -140,7 +136,6 @@ #else #undef CONFIG_HARD_I2C #undef CONFIG_SOFT_I2C -#define ADD_CMD_I2C 0 #endif /* @@ -177,8 +172,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. * * (On TQM8272 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the * X.29 connector, and FCC2 is hardwired to the X.1 connector) @@ -272,20 +266,37 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - ADD_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + +#if CONFIG_I2C + #define CONFIG_CMD_I2C + #define CONFIG_CMD_DATE + #define CONFIG_CMD_DTT + #define CONFIG_CMD_EEPROM +#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -301,7 +312,7 @@ #endif #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -392,7 +403,7 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_NAND_CS_DIST 0x80 #define CFG_NAND_UPM_WRITE_CMD_OFS 0x20 @@ -430,7 +441,7 @@ WRITE_NAND(d, addr); \ } while(0) -#endif /* CFG_CMD_NAND */ +#endif /* CONFIG_CMD_NAND */ #define CONFIG_PCI #ifdef CONFIG_PCI @@ -502,7 +513,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index ed03577..661712b 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -28,9 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG -#undef DEBUG - /* * High Level Configuration Options */ @@ -248,10 +245,10 @@ extern int tqm834x_num_flash_banks; #define CONFIG_NET_MULTI #endif -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 @@ -281,7 +278,6 @@ extern int tqm834x_num_flash_banks; #define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE #define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ - #undef CONFIG_EEPRO100 #define CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -316,38 +312,36 @@ extern int tqm834x_num_flash_banks; #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -/* Common commands */ -#define CFG_CMD_TQM8349_COMMON CFG_CMD_DATE | CFG_CMD_I2C | CFG_CMD_DTT\ - | CFG_CMD_PING | CFG_CMD_EEPROM \ - | CFG_CMD_MII | CFG_CMD_JFFS2 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI \ - | CFG_CMD_TQM8349_COMMON) \ - & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_TQM8349_COMMON) \ - & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS)) -#endif +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#else /* CFG_RAMBOOT */ +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \ - | CFG_CMD_TQM8349_COMMON) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_TQM8349_COMMON) + #define CONFIG_CMD_PCI #endif -#endif /* CFG_RAMBOOT */ - -#include <cmd_confdefs.h> +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif /* * Miscellaneous configurable options @@ -362,7 +356,7 @@ extern int tqm834x_num_flash_banks; #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -387,7 +381,7 @@ extern int tqm834x_num_flash_banks; */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -495,7 +489,7 @@ extern int tqm834x_num_flash_banks; #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 90ecbad..74b16c7 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -80,23 +80,33 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -110,7 +120,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -193,7 +203,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index b3f8f8d..e3936c3 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -78,23 +78,33 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -108,7 +118,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -192,7 +202,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 49aaeea..ae22b77 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -83,23 +83,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -113,7 +124,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -196,7 +207,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 50df49e..5d54f87 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -116,24 +116,35 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 5 #endif -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -147,7 +158,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -231,7 +242,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index f45f3a2..d5ce3ba 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -258,10 +258,10 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 @@ -357,24 +357,35 @@ #define CONFIG_TIMESTAMP /* Print image info with ts */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DTT +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -# define ADD_PCI_CMD (CFG_CMD_PCI) -#else -# define ADD_PCI_CMD 0 + #define CONFIG_CMD_PCI #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - ADD_PCI_CMD | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DTT | \ - CFG_CMD_MII | \ - CFG_CMD_PING ) -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -385,7 +396,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -406,7 +417,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ #endif @@ -418,7 +429,7 @@ #define BOOTFLAG_COLD 0x01 /* Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 9be5db1..40c0940 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -83,26 +83,37 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_NETCONSOLE +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_NETCONSOLE /* * Miscellaneous configurable options @@ -116,7 +127,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -199,7 +210,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 37f6c98..481e3d0 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -83,24 +83,35 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -114,7 +125,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -198,7 +209,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index f03690a..bb3b1cc 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -86,23 +86,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -116,7 +127,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -200,7 +211,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 4959340..d687d08 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -86,23 +86,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -116,7 +127,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -201,7 +212,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 148490b..ff00c13 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -125,7 +125,15 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 4 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -134,16 +142,19 @@ #define CONFIG_TIMESTAMP /* but print image timestmps */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS + /* * Miscellaneous configurable options @@ -157,7 +168,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -241,7 +252,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index d470ade..f36b729 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -131,7 +131,15 @@ # define CONFIG_RTC_DS1337 1 # define CFG_I2C_RTC_ADDR 0x68 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -140,19 +148,22 @@ #define CONFIG_TIMESTAMP /* but print image timestmps */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + /* * Miscellaneous configurable options @@ -166,7 +177,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -187,8 +198,7 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* - * Enable loopw commando. This has only effect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -258,7 +268,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif @@ -478,7 +488,7 @@ #define CONFIG_ETHER_ON_FEC1 /* ... for FEC1 */ #define CONFIG_ETHER_ON_FEC2 /* ... for FEC2 */ -#if (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CONFIG_CMD_MII) #define CFG_DISCOVER_PHY #endif diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index d8686dd..9edf790 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -48,11 +48,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -63,7 +58,6 @@ /* * Video console */ -#if 1 #define CONFIG_VIDEO #define CONFIG_VIDEO_SED13806 #define CONFIG_VIDEO_SED13806_16BPP @@ -76,10 +70,6 @@ #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN -#define ADD_VIDEO_CMD CFG_CMD_BMP -#else -#define ADD_VIDEO_CMD 0 -#endif #ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */ /* @@ -105,12 +95,9 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#define ADD_PCI_CMD CFG_CMD_PCI - #else /* MGT5100 */ #define CONFIG_MII 1 -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ #endif @@ -119,29 +106,36 @@ #define CONFIG_DOS_PARTITION /* USB */ -#if 1 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 -#endif + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - ADD_VIDEO_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#if defined(CONFIG_MPC5200) + #define CONFIG_CMD_PCI +#endif + +#define CONFIG_CMD_BMP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + #if (TEXT_BASE == 0xFE000000) /* Boot low */ # define CFG_LOWBOOT 1 @@ -303,7 +297,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -319,6 +313,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + /* * Various low-level settings */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 5f48a70..df6894f 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -48,27 +48,33 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_JFFS2 |*/ \ - /*CFG_CMD_NAND |*/ \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_USB | \ - CFG_CMD_REGINFO | \ - CFG_CMD_FAT | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_BSP) - -/* this must be included after the definiton of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_USB +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " @@ -145,7 +151,7 @@ #define CONFIG_IPADDR 10.0.0.110 #define CONFIG_SERVERIP 10.0.0.1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ @@ -246,7 +252,7 @@ /*----------------------------------------------------------------------- * NAND flash settings */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_NAND_LEGACY #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -280,6 +286,6 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_MTD_NAND_ECC_JFFS2 1 -#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 96f3d26..34f0ebd 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -58,28 +58,40 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -98,7 +110,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -319,7 +331,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index f2f3ea7..5512f4b 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -60,24 +60,33 @@ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ #define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -96,7 +105,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -244,7 +253,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index 92bade5..1405784 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -95,8 +95,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC #define CONFIG_ETHER_ON_FCC @@ -138,24 +137,34 @@ #endif -/* configure commands */ -#define CONFIG_COMMANDS ( CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_BDI | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IMLS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + /* * boot options & environment @@ -206,7 +215,7 @@ #define CFG_PROMPT "=> " /* console i/o buffer size */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 #else #define CFG_CBSIZE 256 @@ -305,7 +314,7 @@ /* cache configuration */ #define CFG_CACHELINE_SIZE 32 /* for MPC8260 */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of above */ #endif diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 8dc623e..fc177fb 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -70,13 +70,31 @@ #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \ - CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_REGINFO #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_HW_WATCHDOG /* HW Watchdog, board specific */ @@ -92,7 +110,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -277,7 +295,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */ #endif @@ -309,7 +327,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 2bd98b3..20d693f 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -75,14 +75,34 @@ #define CFG_DTT_LOW_TEMP -30 #define CFG_DTT_HYSTERESIS 3 -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \ - CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO | \ - CFG_CMD_DTT) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DTT + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_HW_WATCHDOG /* HW Watchdog, board specific */ @@ -98,7 +118,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -278,7 +298,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */ #endif @@ -310,7 +330,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index faf855d..c1b3da8 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -60,19 +60,31 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -92,7 +104,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -270,7 +282,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 9b32514..611f5a6 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -182,25 +182,33 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ #define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_DIAG | \ - CFG_CMD_FAT ) - -/* CFG_CMD_DHCP | \ */ -/* CFG_CMD_KGDB | \ */ - - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -209,7 +217,7 @@ extern void out32(unsigned int, unsigned long); */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -238,7 +246,6 @@ extern void out32(unsigned int, unsigned long); #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ @@ -255,7 +262,7 @@ extern void out32(unsigned int, unsigned long); */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 440GX CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -267,7 +274,7 @@ extern void out32(unsigned int, unsigned long); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index 37ef105..00c4ff0 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -39,12 +39,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -70,31 +64,40 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #define CONFIG_NET_MULTI #define CONFIG_MII -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Autobooting */ @@ -293,7 +296,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -309,6 +312,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index a5085cf..7c1a5b9 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -55,8 +55,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -106,22 +106,33 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -139,7 +150,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -223,7 +234,7 @@ #endif #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -248,18 +259,18 @@ #define CFG_LSRT 0x0F #define CFG_MPTPR 0x4000 -#define CFG_PSDRAM_BR CFG_SDRAM_BASE | 0x00000041 +#define CFG_PSDRAM_BR (CFG_SDRAM_BASE | 0x00000041) #define CFG_PSDRAM_OR 0xFC0028C0 -#define CFG_LSDRAM_BR CFG_LSDRAM_BASE | 0x00001861 +#define CFG_LSDRAM_BR (CFG_LSDRAM_BASE | 0x00001861) #define CFG_LSDRAM_OR 0xFF803480 -#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00000801) #define CFG_OR0_PRELIM 0xFFE00856 -#define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801 +#define CFG_BR5_PRELIM (CFG_EEPROM | 0x00000801) #define CFG_OR5_PRELIM 0xFFFF03F6 -#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00001801 +#define CFG_BR6_PRELIM (CFG_FLSIMM_BASE | 0x00001801) #define CFG_OR6_PRELIM 0xFF000856 -#define CFG_BR7_PRELIM CFG_BCSR | 0x00000801 +#define CFG_BR7_PRELIM (CFG_BCSR | 0x00000801) #define CFG_OR7_PRELIM 0xFFFF83F6 #define CFG_RESET_ADDRESS 0xC0000000 diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index f163d00..5ba8d1a 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -101,17 +101,29 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MII /* enable MII commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_DATE) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE + /* * JFFS2 partitions @@ -131,15 +143,12 @@ #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -349,7 +358,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/acadia.h b/include/configs/acadia.h index c72d933..e3f6e2c 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -75,7 +75,7 @@ #define CFG_TEMP_STACK_OCM 1 /* OCM as init ram */ /* On Chip Memory location */ -#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_ADDR 0xf8000000 #define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ #define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ #define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ @@ -109,6 +109,7 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_FLASH_CFI /* The flash is CFI compatible */ #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ @@ -122,6 +123,10 @@ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#else +#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */ +#endif + #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) @@ -132,6 +137,63 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * RAM (CRAM) *----------------------------------------------------------------------*/ @@ -209,7 +271,11 @@ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b ${fileaddr} fffc0000 ${filesize};" \ "setenv filesize;saveenv\0" \ - "upd=run load;run update\0" \ + "upd=run load update\0" \ + "nload=tftp 200000 acadia/u-boot-nand.bin\0" \ + "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \ + "setenv filesize;saveenv\0" \ + "nupd=run nload nupdate\0" \ "kozio=bootm ffc60000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -233,27 +299,45 @@ #define CONFIG_SUPPORT_VFAT -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DTT | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_USB + +/* + * No NOR on Acadia when NAND-booting + */ +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#endif #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -262,7 +346,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -305,19 +389,23 @@ */ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#define CFG_NAND_CS 3 /* NAND chip connected to CSx */ - +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 3 /* Memory Bank 0 (Flash) initialization */ #define CFG_EBC_PB0AP 0x03337200 #define CFG_EBC_PB0CR 0xfe0bc000 +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) + /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/ /* Memory Bank 1 (CRAM) initialization */ #define CFG_EBC_PB1AP 0x030400c0 @@ -326,10 +414,24 @@ /* Memory Bank 2 (CRAM) initialization */ #define CFG_EBC_PB2AP 0x030400c0 #define CFG_EBC_PB2CR 0x020bc000 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) -/* Memory Bank 3 (NAND-FLASH) initialization */ -#define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) +/* + * When NAND-booting the CRAM EBC setup must be done in sync mode, since the + * NAND-SPL already initialized the CRAM and EBC to sync mode. + */ +/* Memory Bank 1 (CRAM) initialization */ +#define CFG_EBC_PB1AP 0x9C0201C0 +#define CFG_EBC_PB1CR 0x000bc000 + +/* Memory Bank 2 (CRAM) initialization */ +#define CFG_EBC_PB2AP 0x9C0201C0 +#define CFG_EBC_PB2CR 0x020bc000 +#endif /* Memory Bank 4 (CPLD) initialization */ #define CFG_EBC_PB4AP 0x04006000 @@ -341,9 +443,9 @@ * GPIO Setup *----------------------------------------------------------------------*/ #define CFG_GPIO_CRAM_CLK 8 -#define CFG_GPIO_CRAM_WAIT 9 +#define CFG_GPIO_CRAM_WAIT 9 /* GPIO-In */ #define CFG_GPIO_CRAM_ADV 10 -#define CFG_GPIO_CRAM_CRE (32 + 21) +#define CFG_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */ /*----------------------------------------------------------------------- * Definitions for GPIO_0 setup (PPC405EZ specific) @@ -365,10 +467,10 @@ * GPIO0[28-30] - Trace Outputs / PWM Inputs * GPIO0[31] - PWM_8 I/O */ -#define CFG_GPIO0_TCR 0xC0000000 -#define CFG_GPIO0_OSRL 0x50000000 +#define CFG_GPIO0_TCR 0xC0A00000 +#define CFG_GPIO0_OSRL 0x50004400 #define CFG_GPIO0_OSRH 0x02000055 -#define CFG_GPIO0_ISR1L 0x00000000 +#define CFG_GPIO0_ISR1L 0x00001000 #define CFG_GPIO0_ISR1H 0x00000055 #define CFG_GPIO0_TSRL 0x02000000 #define CFG_GPIO0_TSRH 0x00000055 @@ -387,13 +489,13 @@ * GPIO1[16] - SPI_SS_1_N Output * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs */ -#define CFG_GPIO1_OSRH 0x55455555 +#define CFG_GPIO1_TCR 0xFFFF8414 #define CFG_GPIO1_OSRL 0x40000110 -#define CFG_GPIO1_ISR1H 0x00000000 +#define CFG_GPIO1_OSRH 0x55455555 #define CFG_GPIO1_ISR1L 0x15555445 -#define CFG_GPIO1_TSRH 0x00000000 +#define CFG_GPIO1_ISR1H 0x00000000 #define CFG_GPIO1_TSRL 0x00000000 -#define CFG_GPIO1_TCR 0xFFFF8014 +#define CFG_GPIO1_TSRH 0x00000000 /* * Internal Definitions @@ -403,7 +505,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h new file mode 100644 index 0000000..22eac1b --- /dev/null +++ b/include/configs/ads5121.h @@ -0,0 +1,401 @@ +/* + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * ADS5121 board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define DEBUG +#undef DEBUG + +/* + * Memory map for the ADS5121 board: + * + * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB) + * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) + * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) + * 0x8200_0000 - 0x8200_001F CPLD (32 B) + * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) + */ + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC512X 1 /* MPC512X family */ + +#undef CONFIG_PCI + +#define CFG_MPC512X_CLKIN 66000000 /* in Hz */ + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ + +#define CFG_IMMR 0x80000000 + +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * DDR Setup - manually set all parameters as there's no SPD etc. + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE + +/* DDR Controller Configuration + * + * SYS_CFG: + * [31:31] MDDRC Soft Reset: Diabled + * [30:30] DRAM CKE pin: Enabled + * [29:29] DRAM CLK: Enabled + * [28:28] Command Mode: Enabled (For initialization only) + * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] + * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] + * [20:19] Read Test: DON'T USE + * [18:18] Self Refresh: Enabled + * [17:17] 16bit Mode: Disabled + * [16:13] Ready Delay: 2 + * [12:12] Half DQS Delay: Disabled + * [11:11] Quarter DQS Delay: Disabled + * [10:08] Write Delay: 2 + * [07:07] Early ODT: Disabled + * [06:06] On DIE Termination: Disabled + * [05:05] FIFO Overflow Clear: DON'T USE here + * [04:04] FIFO Underflow Clear: DON'T USE here + * [03:03] FIFO Overflow Pending: DON'T USE here + * [02:02] FIFO Underlfow Pending: DON'T USE here + * [01:01] FIFO Overlfow Enabled: Enabled + * [00:00] FIFO Underflow Enabled: Enabled + * TIME_CFG0 + * [31:16] DRAM Refresh Time: 0 CSB clocks + * [15:8] DRAM Command Time: 0 CSB clocks + * [07:00] DRAM Precharge Time: 0 CSB clocks + * TIME_CFG1 + * [31:26] DRAM tRFC: + * [25:21] DRAM tWR1: + * [20:17] DRAM tWRT1: + * [16:11] DRAM tDRR: + * [10:05] DRAM tRC: + * [04:00] DRAM tRAS: + * TIME_CFG2 + * [31:28] DRAM tRCD: + * [27:23] DRAM tFAW: + * [22:19] DRAM tRTW1: + * [18:15] DRAM tCCD: + * [14:10] DRAM tRTP: + * [09:05] DRAM tRP: + * [04:00] DRAM tRPA + */ + +#define CFG_MDDRC_SYS_CFG 0xF8604200 +#define CFG_MDDRC_SYS_CFG_RUN 0xE8604200 +#define CFG_MDDRC_SYS_CFG_EN 0x30000000 +#define CFG_MDDRC_TIME_CFG0 0x0000281E +#define CFG_MDDRC_TIME_CFG0_RUN 0x01F4281E +#define CFG_MDDRC_TIME_CFG1 0x54EC1168 +#define CFG_MDDRC_TIME_CFG2 0x35210864 + +#define CFG_MICRON_NOP 0x01380000 +#define CFG_MICRON_PCHG_ALL 0x01100400 +#define CFG_MICRON_MR 0x01000022 +#define CFG_MICRON_EM2 0x01020000 +#define CFG_MICRON_EM3 0x01030000 +#define CFG_MICRON_EN_DLL 0x01010000 +#define CFG_MICRON_RST_DLL 0x01000932 +#define CFG_MICRON_RFSH 0x01080000 +#define CFG_MICRON_INIT_DEV_OP 0x01000832 +#define CFG_MICRON_OCD_DEFAULT 0x01010780 +#define CFG_MICRON_OCD_EXIT 0x01010400 + +/* DDR Priority Manager Configuration */ +#define CFG_MDDRCGRP_PM_CFG1 0x000777AA +#define CFG_MDDRCGRP_PM_CFG2 0x00000055 +#define CFG_MDDRCGRP_HIPRIO_CFG 0x00000000 +#define CFG_MDDRCGRP_LUT0_MU 0x11111117 +#define CFG_MDDRCGRP_LUT0_ML 0x7777777A +#define CFG_MDDRCGRP_LUT1_MU 0x4444EEEE +#define CFG_MDDRCGRP_LUT1_ML 0xEEEEEEEE +#define CFG_MDDRCGRP_LUT2_MU 0x44444444 +#define CFG_MDDRCGRP_LUT2_ML 0x44444444 +#define CFG_MDDRCGRP_LUT3_MU 0x55555555 +#define CFG_MDDRCGRP_LUT3_ML 0x55555558 +#define CFG_MDDRCGRP_LUT4_MU 0x11111111 +#define CFG_MDDRCGRP_LUT4_ML 0x1111117C +#define CFG_MDDRCGRP_LUT0_AU 0x33333377 +#define CFG_MDDRCGRP_LUT0_AL 0x7777EEEE +#define CFG_MDDRCGRP_LUT1_AU 0x11111111 +#define CFG_MDDRCGRP_LUT1_AL 0x11111111 +#define CFG_MDDRCGRP_LUT2_AU 0x11111111 +#define CFG_MDDRCGRP_LUT2_AL 0x11111111 +#define CFG_MDDRCGRP_LUT3_AU 0x11111111 +#define CFG_MDDRCGRP_LUT3_AL 0x11111111 +#define CFG_MDDRCGRP_LUT4_AU 0x11111111 +#define CFG_MDDRCGRP_LUT4_AL 0x11111111 + +/* + * NOR FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */ +#define CFG_FLASH_USE_BUFFER_WRITE + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * CPLD registers area is really only 32 bytes in size, but the smallest possible LP + * window is 64KB + */ +#define CFG_CPLD_BASE 0x82000000 +#define CFG_CPLD_SIZE 0x00010000 /* 64 KB */ + +#define CFG_SRAM_BASE 0x30000000 +#define CFG_SRAM_SIZE 0x00020000 /* 128 KB */ + +#define CFG_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ +#define CFG_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ + +/* Use SRAM for initial stack */ +#define CFG_INIT_RAM_ADDR CFG_SRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END CFG_SRAM_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE /* Start of monitor */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ +#if CONFIG_PSC_CONSOLE != 3 +#error CONFIG_PSC_CONSOLE must be 3 +#endif +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE +#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR +#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE +#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#if 0 +#define CFG_I2C_NOPROBES {{0,0x69}} * Don't probe these addrs */ +#endif + +/* + * Ethernet configuration + */ +#define CONFIG_MPC512x_FEC 1 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_ADDR 0x1 +#define CONFIG_MII 1 /* MII PHY management */ + +#if 0 +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ +#endif + +/* + * Environment + */ +#define CFG_ENV_IS_IN_FLASH 1 +/* This has to be a multiple of the Flash sector size */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +/* + * Watchdog timeout = CFG_WATCHDOG_VALUE * 65536 / IPS clock. + * For example, when IPS is set to 66MHz and CFG_WATCHDOG_VALUE is set + * to 0xFFFF, watchdog timeouts after about 64s. For details refer + * to chapter 36 of the MPC5121e Reference Manual. + */ +#define CONFIG_WATCHDOG /* enable watchdog */ +#define CFG_WATCHDOG_VALUE 0xFFFF + + /* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#ifdef CONFIG_CMD_KGDB + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#ifdef CONFIG_CMD_KGDB +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_HOSTNAME ads5121 +#define CONFIG_BOOTFILE uImage + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 200000 /tftpboot/ads5121/u-boot.bin\0" \ + "update=protect off FFF00000 +${filesize};" \ + "era FFF00000 +${filesize};cp.b 200000 FFF00000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#endif /* __CONFIG_H */ diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h index c410891..703d312 100644 --- a/include/configs/adsvix.h +++ b/include/configs/adsvix.h @@ -68,10 +68,28 @@ #define CONFIG_DOS_PARTITION 1 -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_NET) | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_IDE | CFG_CMD_PCMCIA) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PCMCIA + +#undef CONFIG_CMD_NET + #undef CONFIG_SHOW_BOOT_PROGRESS @@ -162,7 +180,7 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ /* #define CONFIG_INITRD_TAG 1 */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/aev.h b/include/configs/aev.h index 6c2a360..5bab793 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -44,11 +44,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -91,34 +86,42 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - CFG_CMD_PCI | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -173,7 +176,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ @@ -324,7 +327,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -343,9 +346,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 67f62d3..d88c3ad 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -29,6 +29,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_ALPR 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ @@ -94,7 +95,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -209,25 +210,37 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_FPGA | \ - CFG_CMD_NAND | \ - CFG_CMD_REGINFO) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -236,7 +249,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -256,7 +269,7 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ @@ -274,7 +287,6 @@ #define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_MASTER_INIT @@ -358,7 +370,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h index 9a1c559..73a8885 100644 --- a/include/configs/armadillo.h +++ b/include/configs/armadillo.h @@ -71,12 +71,21 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/ +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200" diff --git a/include/configs/assabet.h b/include/configs/assabet.h index 1a69ebe..226ad54 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -66,18 +66,30 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp" #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 8fad55d..ecfa21d 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -97,18 +97,31 @@ #define CONFIG_BOOTDELAY 3 /* #define CONFIG_ENV_OVERWRITE 1 */ -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | CFG_CMD_MII |\ - CFG_CMD_DHCP ) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ - CFG_CMD_LOADS )) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_LOADS + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/atc.h b/include/configs/atc.h index bf6c170..3ff4b68 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -64,9 +64,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ @@ -124,27 +122,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_DATE | \ - CFG_CMD_IDE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_DOS_PARTITION +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_DATE +#define CONFIG_CMD_IDE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_DOS_PARTITION /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -285,7 +293,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index beaf385..e1d8f74 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -108,47 +108,29 @@ #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_NET_MULTI 1 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \ - | CONFIG_BOOTP_GATEWAY) - -#define CONFIG_COMMANDS (CFG_CMD_BDI \ - | CFG_CMD_LOADS \ - | CFG_CMD_LOADB \ - | CFG_CMD_IMI \ - /* | CFG_CMD_CACHE */ \ - | CFG_CMD_FLASH \ - | CFG_CMD_MEMORY \ - | CFG_CMD_NET \ - | CFG_CMD_ENV \ - /* | CFG_CMD_IRQ */ \ - | CFG_CMD_BOOTD \ - | CFG_CMD_CONSOLE \ - /* | CFG_CMD_EEPROM */ \ - | CFG_CMD_ASKENV \ - | CFG_CMD_RUN \ - | CFG_CMD_ECHO \ - /* | CFG_CMD_I2C */ \ - | CFG_CMD_REGINFO \ - /* | CFG_CMD_DATE */ \ - | CFG_CMD_DHCP \ - /* | CFG_CMD_AUTOSCRIPT */ \ - /* | CFG_CMD_MII */ \ - | CFG_CMD_MISC \ - /* | CFG_CMD_SDRAM */ \ - /* | CFG_CMD_DIAG */ \ - /* | CFG_CMD_HWFLOW */ \ - /* | CFG_CMD_SAVES */ \ - /* | CFG_CMD_SPI */ \ - /* | CFG_CMD_PING */ \ - | CFG_CMD_MMC \ - | CFG_CMD_FAT \ - | CFG_CMD_IMLS \ - /* | CFG_CMD_ITEST */ \ - | CFG_CMD_EXT2 \ - | CFG_CMD_JFFS2 \ - ) - -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART 1 #define CONFIG_MACB 1 diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 763d1c7..19b29aa 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_BAMBOO 1 /* Board is BAMBOO */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -73,9 +74,9 @@ * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ #define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -114,8 +115,8 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ -#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ +#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ @@ -125,11 +126,11 @@ #define CFG_FLASH_ADDR1 0x2aa #define CFG_FLASH_WORD_SIZE unsigned char -#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */ -#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */ +#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */ +#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -315,45 +316,55 @@ #define USB_2_0_DEVICE #endif /*CONFIG_440EP*/ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_SNTP + #ifdef CONFIG_BAMBOO_NAND -#define _CFG_CMD_NAND CFG_CMD_NAND -#else -#define _CFG_CMD_NAND 0 -#endif /* CONFIG_BAMBOO_NAND */ +#define CONFIG_CMD_NAND +#endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_USB | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - _CFG_CMD_NAND | \ - CFG_CMD_SNTP ) #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -388,7 +399,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -407,7 +417,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -419,7 +429,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/barco.h b/include/configs/barco.h index 624fa1d..0bb446f 100644 --- a/include/configs/barco.h +++ b/include/configs/barco.h @@ -70,22 +70,30 @@ #define CONFIG_BOOTARGS "mem=32M" -/* Add support for a few extra bootp options like: - * - File size - * - DNS + +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_PCI ) +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_HUSH_PARSER 1 /* use "hush" command parser */ #define CONFIG_BOOTDELAY 1 @@ -110,7 +118,6 @@ */ #define CONFIG_PCI /* include pci support */ #undef CONFIG_PCI_PNP -#undef CFG_CMD_NET #define PCI_ENET0_IOADDR 0x80000000 #define PCI_ENET0_MEMADDR 0x80000000 @@ -340,7 +347,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 65dfc81..6cb6bc4 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -97,19 +97,31 @@ #define CONFIG_LOADS_ECHO 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600" +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_DATE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600" #define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 79a1404..cce6ef7 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -240,23 +240,6 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" -#if (CONFIG_DRIVER_SMC91111) -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE) - -#else -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE) -#endif #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #if (CONFIG_DRIVER_SMC91111) @@ -305,20 +288,39 @@ #endif #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_CMD_PING +#endif + #if (CONFIG_SOFT_I2C) -#define CONFIG_COMMANDS2 CFG_CMD_I2C -#else -#define CONFIG_COMMANDS2 0 -#endif /* CONFIG_SOFT_I2C */ +#define CONFIG_CMD_I2C +#endif #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 | CFG_CMD_DHCP) -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2) +#define CONFIG_CMD_DHCP #endif -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Console settings @@ -345,7 +347,7 @@ #endif #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -395,7 +397,7 @@ /* Enabled below option for CF support */ /* #define CONFIG_STAMP_CF 1 */ -#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(CONFIG_STAMP_CF) && defined(CONFIG_CMD_IDE) #define CONFIG_MISC_INIT_R 1 #define CONFIG_DOS_PARTITION 1 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index f6755ac..b9a9e3c 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -144,11 +144,8 @@ #endif #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG #define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ #define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ -#else -#define CFG_CMD_POST_DIAG 0 #endif /* CF-CARD IDE-HDD Support */ @@ -159,51 +156,65 @@ #if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE) # define CONFIG_BFIN_IDE 1 -# define ADD_IDE_CMD CFG_CMD_IDE -#else -# define ADD_IDE_CMD 0 #endif /*#define CONFIG_BF537_NAND */ /* Add nand flash support */ -#ifdef CONFIG_BF537_NAND -# define ADD_NAND_CMD CFG_CMD_NAND -#else -# define ADD_NAND_CMD 0 -#endif - #define CONFIG_NETCONSOLE 1 #define CONFIG_NET_MULTI 1 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE + #if (BFIN_CPU == ADSP_BF534) -#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL & ~CFG_CMD_NET) +#undef CONFIG_CMD_NET #else -#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL | CFG_CMD_PING) +#define CONFIG_CMD_PING +#endif + +#if defined(CONFIG_BFIN_CF_IDE) \ + || defined(CONFIG_BFIN_HDD_IDE) \ + || defined(CONFIG_BFIN_TRUE_IDE) +#define CONFIG_CMD_IDE +#endif + #endif #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) -#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DHCP | \ - ADD_IDE_CMD | \ - ADD_NAND_CMD | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_DATE) -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - ADD_IDE_CMD | \ - CFG_CMD_DATE) + +#define CONFIG_CMD_DHCP + +#if defined(CONFIG_POST) +#define CONFIG_CMD_DIAG #endif +#ifdef CONFIG_BF537_NAND +#define CONFIG_CMD_NAND +#endif + +#endif + + #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" #define CONFIG_LOADADDR 0x1000000 @@ -256,9 +267,6 @@ #endif #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) #if (BFIN_CPU == ADSP_BF534) #define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */ @@ -277,7 +285,7 @@ #endif #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 8d826fa..2966260 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -164,12 +164,6 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" #if (CONFIG_DRIVER_SMC91111) -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DHCP) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ @@ -186,20 +180,36 @@ "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ "" #else -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "flashboot=bootm 0x20100000\0" \ "" #endif -#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 + +#if defined(CONFIG_DRIVER_SMC91111) +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#endif + /* * Console settings @@ -208,7 +218,7 @@ #define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 10c4814..7736a1e 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -137,25 +137,37 @@ #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -166,7 +178,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -219,7 +231,7 @@ #define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */ #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ -#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) +#if defined(CONFIG_CMD_EEPROM) #define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ #endif @@ -314,7 +326,7 @@ */ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405EP CPU */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -426,7 +438,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h index ae75539..a9a5254 100644 --- a/include/configs/c2mon.h +++ b/include/configs/c2mon.h @@ -68,7 +68,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -77,15 +85,18 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -98,7 +109,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -174,7 +185,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/canmb.h b/include/configs/canmb.h index ec6d57e..d577b95 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -38,11 +38,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* @@ -52,21 +47,30 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + /* * MUST be low boot - HIGHBOOT is not supported anymore @@ -181,7 +185,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -199,6 +203,11 @@ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index 6997c7a..e06735d 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -61,10 +61,21 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2 @@ -75,7 +86,7 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400" #define CONFIG_CMDLINE_TAG -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 5947c2a..ae40b35 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -58,10 +58,23 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> -#undef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV)) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_ENV + #define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200" diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index e62fc06..c1dd33d 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -58,10 +58,23 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> -#undef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV)) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_ENV + #define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTARGS "mem=32M console=ttyAM0,115200" diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h new file mode 100644 index 0000000..d554348 --- /dev/null +++ b/include/configs/cm5200.h @@ -0,0 +1,338 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_CM5200 1 /* ... on CM5200 platform */ + +/* + * Supported commands + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ +/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C) +#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) +/* List of I2C addresses to be verified by POST */ +#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } + +/* display image timestamps */ +#define CONFIG_TIMESTAMP 1 + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ + "echo" +#undef CONFIG_BOOTARGS + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.33\0" \ + "serverip=192.168.1.1\0" \ + "gatewayip=192.168.1.1\0" \ + "console=ttyPSC0\0" \ + "u-boot_addr=100000\0" \ + "kernel_addr=200000\0" \ + "kernel_addr_flash=fc0c0000\0" \ + "fdt_addr=400000\0" \ + "fdt_addr_flash=fc0a0000\0" \ + "ramdisk_addr=500000\0" \ + "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ + "u-boot=/tftpboot/cm5200/u-boot.bin\0" \ + "bootfile_fdt=/tftpboot/cm5200/uImage\0" \ + "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \ + "load=tftp ${u-boot_addr} ${u-boot}\0" \ + "update=prot off fc000000 +${filesize}; " \ + "era fc000000 +${filesize}; " \ + "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ + "prot on fc000000 +${filesize}\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off panic=1\0" \ + "flash_flash=run flashargs addinit addip addcons;" \ + "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ + "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ + "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_flash" + +/* + * Low level configuration + */ + +/* + * Clock configuration + */ +#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ +#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_LOWBOOT 1 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_BOARD_TYPES 1 /* we use board_type */ + +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ + +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xfc000000 +/* we need these despite using CFI */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ +#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ + + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#undef CFG_LOWBOOT +#endif + + +/* + * Chip selects configuration + */ +/* Boot Chipselect */ +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ +/* use board_early_init_r to enable flash write in CS_BOOT */ +#define CONFIG_BOARD_EARLY_INIT_R + +/* Flash memory addressing */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* No burst, dead cycle = 1 for CS0 (Flash) */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x00000001 + +/* + * SDRAM configuration + * settings for k4s561632E-xx75, assuming XLB = 132 MHz + */ +#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ +#define SDRAM_CONTROL 0x514F0000 +#define SDRAM_CONFIG1 0xE2333900 +#define SDRAM_CONFIG2 0x8EE70000 + +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE 1 +#define MTDIDS_DEFAULT "nor0=cm5200-0" +#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \ + "384k(uboot),128k(env)," \ + "128k(redund_env),128k(dtb)," \ + "2m(kernel),27904k(rootfs)," \ + "-(config)" + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ +#define CFG_I2C_SPEED 40000 /* 40 kHz */ +#define CFG_I2C_SLAVE 0x0 +#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ +#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + +/* + * USB configuration + */ +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 +/* Partitions (for USB) */ +#define CONFIG_MAC_PARTITION 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_ISO_PARTITION 1 + +/* + * Invoke our last_stage_init function - needed by fwupdate + */ +#define CONFIG_LAST_STAGE_INIT 1 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Configuration of redundant environment */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Pin multiplexing configuration + */ + +/* + * CS1/GPIO_WKUP_6: GPIO (default) + * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 + * IRDA/PSC6: UART + * Ether: Ethernet 100Mbit with MD + * PCI_DIS: PCI controller disabled + * USB: USB + * PSC3: SPI with UART3 + * PSC2: UART + * PSC1: UART + */ +#define CFG_GPS_PORT_CONFIG 0x10559C44 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP 1 /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_ALT_MEMTEST 1 +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ + +#define CONFIG_LOOPW 1 + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#ifdef CONFIG_CMD_KGDB +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Flat Device Tree support + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + +#endif /* __CONFIG_H */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 572a70f..f32c8c2 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -104,35 +104,44 @@ #define CFG_I2C_EEPROM_ADDR 0x50 #define CFG_I2C_EEPROM_ADDR_LEN 1 #define CFG_I2C_EEPROM_ADDR_OVERFLOW +#else +#define CONFIG_TIMESTAMP #endif /* still about 20 kB free with this defined */ #define CFG_LONGHELP #define CONFIG_BOOTDELAY 1 -#ifdef CONFIG_HARD_I2C -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) & \ - ~(CFG_CMD_FPGA | CFG_CMD_MISC) ) -#else -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) & \ - ~(CFG_CMD_FPGA | CFG_CMD_MISC) ) -#define CONFIG_TIMESTAMP + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC + +#if defined(CONFIG_HARD_I2C) + #define CONFIG_CMD_DATE + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C #endif -#define CFG_LONGHELP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CFG_LONGHELP #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index e459919..cd92af2 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -44,13 +44,33 @@ #define CONFIG_BAUDRATE 57600 -#define CONFIG_COMMANDS (CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | \ - CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ASKENV | \ - CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_ENV | CFG_CMD_RUN | \ - CFG_CMD_IMI) -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_IMI + #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -73,7 +93,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 9033fa8..510524a 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -130,16 +130,27 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -/* --- - * Define which commmands should be available at u-boot command prompt - * --- + +/* + * BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | CFG_CMD_PING & ~(CFG_CMD_LOADS | \ -CFG_CMD_LOADB) | CFG_CMD_MII) +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_MII -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* *----------------------------------------------------------------------------- @@ -184,7 +195,7 @@ from which user programs will be started */ #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index aea2e64..84d50c7 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -71,8 +71,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #undef CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -88,10 +87,25 @@ #define CONFIG_BAUDRATE 9600 #endif -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL|CFG_CMD_KGDB)&~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_KGDB + +#undef CONFIG_CMD_NET + #ifdef DEBUG #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -102,7 +116,7 @@ #define CONFIG_BOOTARGS "root=/dev/ram rw" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #undef CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -124,7 +138,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -256,7 +270,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index 80962d3..ce38af1 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -59,10 +59,25 @@ #define CFG_I2C_SLAVE 0x7F -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_KGDB | CFG_CMD_I2C) & ~CFG_CMD_NET) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -73,7 +88,7 @@ #define CONFIG_BOOTARGS "root=/dev/ram rw" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #undef CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #define CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -88,7 +103,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -200,7 +215,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index f5efcd9..ce4ea1f 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -50,11 +50,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -92,12 +87,6 @@ #define CONFIG_NS8382X 1 #endif -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -107,28 +96,35 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - CFG_CMD_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_DATE | \ - ADD_PCI_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_BSP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_DATE #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -277,7 +273,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -295,6 +291,11 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/cradle.h b/include/configs/cradle.h index 776e1d2..eb93a8f 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -61,10 +61,21 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200" diff --git a/include/configs/csb226.h b/include/configs/csb226.h index f04102e..0be0f21 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -57,10 +57,34 @@ #define CONFIG_BAUDRATE 19200 #undef CONFIG_MISC_INIT_R /* not used yet */ -#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_DHCP|CFG_CMD_CACHE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_CACHE + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0" @@ -73,7 +97,7 @@ #define CONFIG_CMDLINE_TAG 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 27d64c1..c43b497 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -73,30 +73,32 @@ #endif /* - * BOOTP/DHCP protocol configuration - * + * BOOTP options */ -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_BOOTFILESIZE ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS2 + + /* - * U-Boot Monitor Command Line Functions Configuration - * + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PCI +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + /* * Serial download configuration @@ -109,7 +111,7 @@ * KGDB Configuration * */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -125,7 +127,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 09d52de..a7120aa 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -73,30 +73,31 @@ #endif /* - * BOOTP/DHCP protocol configuration - * + * BOOTP options */ -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_BOOTFILESIZE ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS2 + + /* - * U-Boot Monitor Command Line Functions Configuration - * + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PCI +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP /* * Serial download configuration @@ -109,7 +110,7 @@ * KGDB Configuration * */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -125,7 +126,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 071d5b7..976dae3 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -99,20 +99,32 @@ #define CONFIG_BOOTDELAY 3 /* #define CONFIG_ENV_OVERWRITE 1 */ -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING ) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ - CFG_CMD_LOADS )) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_LOADS + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h new file mode 100644 index 0000000..8ecd059 --- /dev/null +++ b/include/configs/davinci_dvevm.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * Define this to make U-Boot skip low level initialization when loaded + * by initial bootloader. Not required by NAND U-Boot version but IS + * required for a NOR version used to burn the real NOR U-Boot into + * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive + * so it is NOT possible to build a U-Boot with both NAND and NOR routines. + * NOR U-Boot is loaded directly from Flash so it must perform all the + * low level initialization itself. NAND version is loaded by an initial + * bootloader (UBL in TI-ese) that performs such an initialization so it's + * skipped in NAND version. The third DaVinci boot mode loads a bootloader + * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) + * performing low level init prior to loading. All that means we can NOT use + * NAND version to put U-Boot into NOR because it doesn't have NOR support and + * we can NOT use NOR version because it performs low level initialization + * effectively destroying itself in DDR memory. That's why a separate NOR + * version with this define is needed. It is loaded via UART, then one uses + * it to somehow download a proper NOR version built WITHOUT this define to + * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze + * NOR support into the initial bootloader so it won't be needed but DaVinci + * static RAM might be too small for this (I have something like 2Kbytes left + * as of now, without NOR support) so this might've not happened... + * +#define CONFIG_NOR_UART_BOOT + */ + +/*=======*/ +/* Board */ +/*=======*/ +#define DV_EVM +#define CFG_NAND_SMALLPAGE +#define CFG_USE_NOR +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ +#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#ifdef CFG_USE_NAND +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#ifdef CFG_NAND_SMALLPAGE +#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_16K +#else +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#endif +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define DEF_BOOTM "" +#elif defined(CFG_USE_NOR) +#ifdef CONFIG_NOR_UART_BOOT +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#else +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#endif +#define CFG_ENV_IS_IN_FLASH +#undef CFG_NO_FLASH +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3) +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#endif +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CFG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#elif defined(CFG_USE_NOR) +#define CONFIG_CMD_JFFS2 +#else +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!" +#endif +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h new file mode 100644 index 0000000..96c9a30 --- /dev/null +++ b/include/configs/davinci_schmoogie.h @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/*=======*/ +/* Board */ +/*=======*/ +#define SCHMOOGIE +#define CFG_NAND_LARGEPAGE +#define CFG_USE_NAND +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_OVERWRITE_ETHADDR_ONCE +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +/*=====================*/ +/* Board related stuff */ +/*=====================*/ +#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */ +#define CFG_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */ +#define CONFIG_HAS_UID +#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */ +#define CFG_UID_ADDR 0x50 /* UID chip I2C address */ +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NAND +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h new file mode 100644 index 0000000..de8c4fa --- /dev/null +++ b/include/configs/davinci_sonata.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * Define this to make U-Boot skip low level initialization when loaded + * by initial bootloader. Not required by NAND U-Boot version but IS + * required for a NOR version used to burn the real NOR U-Boot into + * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive + * so it is NOT possible to build a U-Boot with both NAND and NOR routines. + * NOR U-Boot is loaded directly from Flash so it must perform all the + * low level initialization itself. NAND version is loaded by an initial + * bootloader (UBL in TI-ese) that performs such an initialization so it's + * skipped in NAND version. The third DaVinci boot mode loads a bootloader + * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) + * performing low level init prior to loading. All that means we can NOT use + * NAND version to put U-Boot into NOR because it doesn't have NOR support and + * we can NOT use NOR version because it performs low level initialization + * effectively destroying itself in DDR memory. That's why a separate NOR + * version with this define is needed. It is loaded via UART, then one uses + * it to somehow download a proper NOR version built WITHOUT this define to + * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze + * NOR support into the initial bootloader so it won't be needed but DaVinci + * static RAM might be too small for this (I have something like 2Kbytes left + * as of now, without NOR support) so this might've not happened... + * +#define CONFIG_NOR_UART_BOOT + */ + +/*=======*/ +/* Board */ +/*=======*/ +#define SONATA_BOARD +#define CFG_NAND_SMALLPAGE +#define CFG_USE_NOR +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#ifdef CFG_USE_NAND +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_16K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define DEF_BOOTM "" +#elif defined(CFG_USE_NOR) +#ifdef CONFIG_NOR_UART_BOOT +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#else +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#endif +#define CFG_ENV_IS_IN_FLASH +#undef CFG_NO_FLASH +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */ +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2) +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#endif +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CFG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#elif defined(CFG_USE_NOR) +#define CONFIG_CMD_JFFS2 +#else +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!" +#endif +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 4cc5085..b2f606f 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -75,21 +75,57 @@ #ifdef CONFIG_DBAU1550 /* Boot from flash by default, revert to bootp */ #define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm" - -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_NET) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FPGA | CFG_CMD_IDE | \ - CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \ - CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C)) #else /* CONFIG_DBAU1550 */ #define CONFIG_BOOTCOMMAND "bootp;bootm" - -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ - CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | \ - CFG_CMD_ELF | CFG_CMD_BDI | CFG_CMD_BEDBUG)) #endif /* CONFIG_DBAU1550 */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_RUN + + +#ifdef CONFIG_DBAU1550 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_PCMCIA + +#else + +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +#endif + /* * Miscellaneous configurable options diff --git a/include/configs/debris.h b/include/configs/debris.h index 8ff963f..7667e5e 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -122,23 +122,35 @@ #define CONFIG_BAUDRATE 9600 #define CONFIG_DRAM_SPEED 100 /* MHz */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGBD | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SAVES | \ - CFG_CMD_SDRAM) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_KGBD +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM /* @@ -435,7 +447,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/delta.h b/include/configs/delta.h index 1568120..09667ed 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -87,22 +87,49 @@ #define CONFIG_BAUDRATE 115200 -/* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifdef TURN_ON_ETHERNET -# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) + +#define CONFIG_CMD_PING + #else -# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_ENV \ - | CFG_CMD_NAND \ - | CFG_CMD_I2C) \ - & ~(CFG_CMD_NET \ - | CFG_CMD_FLASH \ - | CFG_CMD_IMLS)) + +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + #endif +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE +#define CFG_USB_OHCI_SLOT_NAME "delta" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ #define CONFIG_BOOTDELAY -1 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -114,7 +141,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index 9ac2856..d32e046 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -66,10 +66,21 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" @@ -80,7 +91,7 @@ #define CONFIG_BOOTFILE "dnp1110" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index a014c7c..f8e2c88 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -58,17 +58,27 @@ /*#define CONFIG_DRAM_SPEED 66 */ /* MHz */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_FLASH | \ - CFG_CMD_SDRAM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ENV | \ - CFG_CMD_PCI ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ENV +#define CONFIG_CMD_PCI /*----------------------------------------------------------------------- @@ -398,7 +408,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ebony.h b/include/configs/ebony.h index a42319b..2c626a0 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_EBONY 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -121,7 +122,7 @@ #define CFG_FLASH_WORD_SIZE unsigned char #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -207,26 +208,38 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -235,7 +248,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -269,7 +282,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ @@ -286,7 +298,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -298,7 +310,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index bdda629..f5cf477 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -62,12 +62,23 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_JFFS2) +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600" @@ -78,7 +89,7 @@ /*#define CONFIG_BOOTFILE "impa7" */ #define CONFIG_BOOTCOMMAND "bootp;bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index 04147a5..85ad70a 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -60,8 +60,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -123,23 +123,34 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ - | CFG_CMD_I2C \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -157,7 +168,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -183,20 +194,20 @@ #define CFG_DIRECT_FLASH_TFTP -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS #define CFG_JFFS2_FIRST_SECTOR 0 #define CFG_JFFS2_LAST_SECTOR 62 #define CFG_JFFS2_SORT_FRAGMENTS #define CFG_JFFS_CUSTOM_PART -#endif /* CFG_CMD_JFFS2 */ +#endif -#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) #define CONFIG_HARD_I2C 1 /* To enable I2C support */ #define CFG_I2C_SPEED 100000 /* I2C speed */ #define CFG_I2C_SLAVE 0x7F /* I2C slave address */ -#endif /* CFG_CMD_I2C */ +#endif #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) @@ -240,7 +251,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 6862519..025c249 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -183,8 +183,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ @@ -291,37 +290,49 @@ #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " -/* What U-Boot subsytems do you want enabled? */ + /* -*/ -#define CONFIG_COMMANDS ( CFG_CMD_ALL & \ - ~( CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DCR | \ - CFG_CMD_DHCP | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_MII | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_UNIVERSE| \ - CFG_CMD_USB | \ - CFG_CMD_VFD | \ - CFG_CMD_XIMG ) ) + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DCR +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG /* Where do the internal registers live? */ @@ -342,13 +353,10 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -496,7 +504,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index a77ccef..4febd32 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -60,8 +60,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -108,22 +108,34 @@ #define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ - | CFG_CMD_I2C \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_DATE \ - | CFG_CMD_DTT \ - | CFG_CMD_EEPROM \ - | CFG_CMD_PCI \ - | CFG_CMD_DIAG \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_DIAG + #define CONFIG_ETHADDR 00:10:EC:00:88:65 #define CONFIG_HAS_ETH1 @@ -138,7 +150,7 @@ #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -156,7 +168,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -308,20 +320,20 @@ #define CFG_DIRECT_FLASH_TFTP -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS #define CFG_JFFS2_FIRST_SECTOR 0 #define CFG_JFFS2_LAST_SECTOR 62 #define CFG_JFFS2_SORT_FRAGMENTS #define CFG_JFFS_CUSTOM_PART -#endif /* CFG_CMD_JFFS2 */ +#endif -#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) #define CONFIG_HARD_I2C 1 /* To enable I2C support */ #define CFG_I2C_SPEED 100000 /* I2C speed */ #define CFG_I2C_SLAVE 0x7F /* I2C slave address */ -#endif /* CFG_CMD_I2C */ +#endif #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) @@ -358,7 +370,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h index 88c2c74..66500c2 100644 --- a/include/configs/evb4510.h +++ b/include/configs/evb4510.h @@ -72,12 +72,23 @@ #define CONFIG_BAUDRATE 19200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) +#define CONFIG_CMD_PING -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_ETHADDR 00:40:95:36:35:33 #define CONFIG_NETMASK 255.255.255.0 @@ -89,7 +100,7 @@ #define CONFIG_BOOTCOMMAND "tftp 100000 uImage" /* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index b68a2dc..e11ce4c 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -79,18 +79,30 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp" #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/gth2.h b/include/configs/gth2.h index a49ed3b..c2a50c1 100644 --- a/include/configs/gth2.h +++ b/include/configs/gth2.h @@ -71,12 +71,37 @@ /* Boot from Compact flash partition 2 as default */ #define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm" -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ - CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \ - CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT )) -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_AUTOSCRIPT + /* * Miscellaneous configurable options diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 4f83b19..ff57240 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -194,8 +194,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC @@ -286,13 +285,16 @@ #undef CONFIG_AUTOBOOT_DELAY_STR #define DEBUG_BOOTKEYS 0 -/* Add support for a few extra bootp options like: - * - File size - * - DNS +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS /* undef this to save memory */ #define CFG_LONGHELP @@ -300,14 +302,21 @@ /* Monitor Command Prompt */ #define CFG_PROMPT "=> " -/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MII) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_KGDB + /* Where do the internal registers live? */ #define CFG_IMMR 0xf0000000 @@ -331,13 +340,10 @@ #define CONFIG_GW8260 1 /* on an GW8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -473,7 +479,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/hermes.h b/include/configs/hermes.h index 91117ba..e3a2ed2 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -64,23 +64,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS CONFIG_CMD_DFL -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/*----------------------------------------------------------------------*/ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -157,7 +162,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 4d813d8..6c15b4e 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -38,11 +38,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* @@ -55,22 +50,31 @@ /* Partitions */ #define CONFIG_DOS_PARTITION + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP + #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -222,7 +226,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -231,6 +235,11 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* Enable an alternate, more extensive memory test */ #define CFG_ALT_MEMTEST @@ -242,8 +251,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 8cad98d..2f64ec2 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -69,8 +69,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -174,32 +173,44 @@ #define CONFIG_LAST_STAGE_INIT -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_FPGA | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NAND | \ - CFG_CMD_MMC | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_PCI | \ - CFG_CMD_USB | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_UNIVERSE| \ - CFG_CMD_VFD | \ - CFG_CMD_XIMG ) ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG + #ifdef DEBUG #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -218,7 +229,7 @@ #define DEBUG_BOOTKEYS 0 #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -247,7 +258,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -400,7 +411,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif diff --git a/include/configs/idmr.h b/include/configs/idmr.h index b1dbe2c..1ab7b27 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -78,18 +78,27 @@ "u-boot=/tftpboot/idmr/u-boot.bin\0" \ "" + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Commands' definition + * Command line configuration. */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NET) & \ - ~(CFG_CMD_LOADS | \ - CFG_CMD_LOADB)) +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB /* @@ -115,11 +124,11 @@ #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else /* !(CONFIG_COMMANDS & CFG_CMD_KGDB) */ +#else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif /* (CONFIG_COMMANDS & CFG_CMD_KGDB) */ +#endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ @@ -206,8 +215,8 @@ "2m(rootfs)," \ "-(user)"; -#if (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CONFIG_CMD_MII) #error MII commands don't work on iDMR board and sholud not be enabled. -#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */ +#endif #endif /* _IDMR_H */ diff --git a/include/configs/impa7.h b/include/configs/impa7.h index 8b841ff..0e52ffe 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -61,12 +61,23 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_JFFS2) +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600" @@ -77,7 +88,7 @@ /*#define CONFIG_BOOTFILE "impa7" */ #define CONFIG_BOOTCOMMAND "bootp;bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/incaip.h b/include/configs/incaip.h index 1c6216b..4caf54e 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -81,15 +81,29 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_SNTP ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index ad3cf06..0fac28f 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -40,11 +40,6 @@ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -76,21 +71,30 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -239,7 +243,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -248,6 +252,11 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* Enable an alternate, more extensive memory test */ #define CFG_ALT_MEMTEST @@ -259,8 +268,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 3cb9ebc..5310e0d 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -54,10 +54,34 @@ #define CONFIG_BAUDRATE 19200 #define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */ -#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP|CFG_CMD_CACHE) -/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMI +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_RUN + #define CONFIG_BOOTDELAY 3 /* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 2f6e399..1452bf2 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -66,15 +66,26 @@ #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 -/*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */ /*#define CONFIG_NET_MULTI */ -/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ -#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_IMI +#define CONFIG_CMD_BDI +#define CONFIG_CMD_MEMORY -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 4189f9c..69310d4 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -70,17 +70,28 @@ #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 + /* -#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_PCI) -*/ -#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | \ - CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV \ - ) + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + #if 0 #define CONFIG_BOOTDELAY 2 diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 9f9fdb2..bc5f9e1 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -53,14 +53,28 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF | CFG_CMD_PCI) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PCI + #define CONFIG_PCI #define CONFIG_NET_MULTI #define CONFIG_EEPRO100 -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -/* These are u-boot generic parameters */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 /*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b*/ @@ -71,7 +85,7 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" #define CONFIG_CMDLINE_TAG -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h index af4ecf6..da59230 100644 --- a/include/configs/ixdpg425.h +++ b/include/configs/ixdpg425.h @@ -75,16 +75,27 @@ #define CONFIG_BAUDRATE 115200 #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_NET | \ - CFG_CMD_MII | \ - CFG_CMD_PING) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -/* These are u-boot generic parameters */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 5b97526..b68c5aa 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -41,11 +41,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -71,7 +66,6 @@ #define CONFIG_PCI_IO_BUS 0x50000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 -#define ADD_PCI_CMD CFG_CMD_PCI #endif #define CFG_XLB_PIPELINING 1 @@ -87,15 +81,28 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_PCI) +#define CODFIG_CMD_PCI +#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Autobooting @@ -254,7 +261,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -271,6 +278,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index cc47a16..110ad44 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -210,28 +210,40 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_DTT | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + #define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */ #define CONFIG_MII 1 /* MII PHY management */ @@ -254,7 +266,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -314,7 +326,6 @@ #undef CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #undef CFG_PCI_MASTER_INIT @@ -421,7 +432,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -433,7 +444,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index 6590f6f..75d9c3b 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -78,17 +78,29 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_I2C | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP ) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC)) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC + #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 61cf705..569800a 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -60,32 +60,44 @@ #undef CONFIG_WATCHDOG -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_DS164x -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP) -#define CONFIG_NETCONSOLE +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP -#include <cmd_confdefs.h> + +#define CONFIG_NETCONSOLE #define CFG_LONGHELP #define CFG_PROMPT "=> " @@ -178,7 +190,7 @@ #define CONFIG_SYS_CLK_FREQ 33333333 #define CFG_CACHELINE_SIZE 32 -#if CONFIG_COMMANDS & CFG_CMD_KGDB +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 #endif diff --git a/include/configs/lart.h b/include/configs/lart.h index a00640b..8f18c9f 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -59,10 +59,21 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" @@ -73,7 +84,7 @@ #define CONFIG_BOOTFILE "elinos-lart" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/logodl.h b/include/configs/logodl.h index 715ed74..2b2d377 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -54,10 +54,26 @@ #define CONFIG_BAUDRATE 19200 #undef CONFIG_MISC_INIT_R /* FIXME: misc_init_r() missing */ -#define CONFIG_COMMANDS (CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO) -/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_RUN + #define CONFIG_BOOTDELAY 3 /* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 7e51523..e3fef5e 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -1,12 +1,8 @@ /* - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Configuation settings for the EP7312 board. - * - * Modified to work on Armadillo HT1070 ARM720T board - * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com + * Configuation settings for the LPC2292SODIMM board from Embedded Artists. * * See file CREDITS for list of people who contributed to this * project. @@ -31,7 +27,7 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram + * If we are developing, we might want to start u-boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_INIT_CRITICAL /* undef for developing */ @@ -46,7 +42,7 @@ #define CONFIG_ARM7 1 /* This is a ARM7 CPU */ #define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ #define CONFIG_LPC2292 -#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ #undef CONFIG_USE_IRQ /* don't need them anymore */ @@ -70,24 +66,31 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_MMC | \ - CFG_CMD_NET | \ - CFG_CMD_PING) +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 5 /* @@ -103,11 +106,12 @@ #define CFG_MEMTEST_START 0x40000000 /* memtest works on */ #define CFG_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ +#define CFG_LOAD_ADDR 0x00040000 /* default load address for */ + /* armadillo: kernel img is here*/ -#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ #define CFG_HZ 2048 /* decrementer freq in Hz */ /* valid baudrates */ @@ -154,5 +158,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_MMC 1 +/* we use this ethernet chip */ +#define CONFIG_ENC28J60 #endif /* __CONFIG_H */ diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index d7d0460..0414889 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -55,19 +55,32 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) + #define CONFIG_CMD_PING + #undef CONFIG_CMD_CACHE #else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) + #define CONFIG_CMD_DATE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 3 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index 4002e68..11ede96 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -55,19 +55,32 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) + #define CONFIG_CMD_PING) + #undef CONFIG_CMD_CACHE #else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) + #define CONFIG_CMD_DATE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 3 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/luan.h b/include/configs/luan.h index 045a144..72aae09 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -213,31 +213,42 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - 0) - -/* this must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -265,7 +276,7 @@ * PCI stuff *----------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_PCI) +#if defined(CONFIG_CMD_PCI) /* General PCI */ #define CONFIG_PCI /* include pci support */ @@ -273,14 +284,13 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #undef CFG_PCI_MASTER_INIT #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CFG_PCI_SUBSYS_DEVICEID 0x4403 /* whatever */ -#endif /* CONFIG_COMMANDS & CFG_CMD_PCI */ +#endif /* * For booting Linux, the board info and command line data @@ -294,7 +304,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -306,7 +316,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index ad1035b..4adf254 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -67,10 +67,24 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -82,7 +96,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 9b4c004..8a82702 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -170,34 +170,41 @@ #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BMP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 +#define CONFIG_CMD_DIAG #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP ) + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options @@ -210,7 +217,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -276,7 +283,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0x40000000 -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -370,7 +377,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h new file mode 100644 index 0000000..ef9ab22 --- /dev/null +++ b/include/configs/lwmon5.h @@ -0,0 +1,461 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * lwmon5.h - configuration for lwmon5 board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_LWMON5 1 /* Board is lwmon5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_LIME_BASE_0 0xc0000000 +#define CFG_LIME_BASE_1 0xc1000000 +#define CFG_LIME_BASE_2 0xc2000000 +#define CFG_LIME_BASE_3 0xc3000000 +#define CFG_FPGA_BASE_0 0xc4000000 +#define CFG_FPGA_BASE_1 0xc4200000 +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* no external clock provided */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/* define this if you want console on UART1 */ +#define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */ + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ +#if 0 /* test-only: disable ECC for now */ +#define CONFIG_DDR_ECC 1 /* enable ECC */ +#endif + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ +#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=lwmon5\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xxFP\0" \ + "bootfile=/tftpboot/lwmon5/uImage\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ + "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ + "cp.b 200000 FFF80000 80000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#ifdef CONFIG_440EPX +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +#endif /* CONFIG_440EPX */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#ifdef CONFIG_440EPX +#define CONFIG_CMD_USB +#endif + + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CONFIG_SUPPORT_VFAT + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03050200 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xdc000) + +/* Memory Bank 1 (Lime) initialization */ +#define CFG_EBC_PB1AP 0x01004380 +#define CFG_EBC_PB1CR (CFG_LIME_BASE_0 | 0xdc000) + +/* Memory Bank 2 (FPGA) initialization */ +#define CFG_EBC_PB2AP 0x01004400 +#define CFG_EBC_PB2CR (CFG_FPGA_BASE_0 | 0x1c000) + +/* Memory Bank 3 (FPGA2) initialization */ +#define CFG_EBC_PB3AP 0x01004400 +#define CFG_EBC_PB3CR (CFG_FPGA_BASE_1 | 0x1c000) + +#define CFG_EBC_CFG 0xb8400000 + +/*----------------------------------------------------------------------- + * Graphics (Fujitsu Lime) + *----------------------------------------------------------------------*/ +/* SDRAM Clock frequency adjustment register */ +#define CFG_LIME_SDRAM_CLOCK 0xC1FC0000 +/* Lime Clock frequency is to set 133MHz */ +#define CFG_LIME_CLOCK_133MHZ 0x10000 + +/* SDRAM Parameter register */ +#define CFG_LIME_MMR 0xC1FCFFFC +/* SDRAM parameter value */ +#define CFG_LIME_MMR_VALUE 0x414FB7F2 + +/*----------------------------------------------------------------------- + * GPIO Setup + *----------------------------------------------------------------------*/ +#define CFG_GPIO_PHY1_RST 12 +#define CFG_GPIO_FLASH_WP 14 +#define CFG_GPIO_PHY0_RST 22 +#define CFG_GPIO_WATCHDOG 58 +#define CFG_GPIO_LIME_S 59 +#define CFG_GPIO_LIME_RST 60 + +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index c2324a0..cc2dbcd 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -40,11 +40,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration * @@ -92,27 +87,37 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* automatic software updates (see board/mcc200/auto_update.c) */ #define CONFIG_AUTO_UPDATE 1 + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_USB_CMD | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_USB + +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -128,20 +133,30 @@ # define CFG__LINUX_CONSOLE "ttyS0" #else # define CFG__BOARDNAME "mcc200" -# define CFG__LINUX_CONSOLE "ttyEU7" +# define CFG__LINUX_CONSOLE "ttyEU5" #endif +/* Network */ +#define CONFIG_ETHADDR 00:17:17:ff:00:00 +#define CONFIG_IPADDR 10.76.9.29 +#define CONFIG_SERVERIP 10.76.9.1 + +#include <version.h> /* For U-Boot version */ + #define CONFIG_EXTRA_ENV_SETTINGS \ + "ubootver=" U_BOOT_VERSION "\0" \ "netdev=eth0\0" \ "hostname=" CFG__BOARDNAME "\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "ramargs=setenv bootargs root=/dev/mtdblock2 " \ + "rootfstype=cramfs\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ + "console=${console},${baudrate} " \ + "ubootver=${ubootver} board=${board}\0" \ "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addcons;" \ @@ -153,6 +168,7 @@ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ "text_base=" MK_STR(TEXT_BASE) "\0" \ + "kernel_addr=0xFC0C0000\0" \ "update=protect off ${text_base} +${filesize};" \ "era ${text_base} +${filesize};" \ "cp.b 200000 ${text_base} ${filesize}\0" \ @@ -253,7 +269,7 @@ /* * Ethernet configuration */ -#define CONFIG_MPC5xxx_FEC 1 +/*#define CONFIG_MPC5xxx_FEC 1*/ /* * Define CONFIG_FEC_10MBIT to force FEC at 10Mb */ @@ -291,7 +307,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -307,6 +323,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ @@ -329,6 +350,13 @@ #define CFG_CS1_SIZE 0x00001000 #define CFG_CS1_CFG 0x1d300 +/* Leica - build revision resistors */ +/* +#define CFG_CS3_START 0x80020000 +#define CFG_CS3_SIZE 0x00000004 +#define CFG_CS3_CFG 0x1d300 +*/ + /* * Select one of quarts as a default * console. If undefined - PSC console @@ -384,4 +412,8 @@ #define CONFIG_USB_CLOCK 0x0001BBBB #define CONFIG_USB_CONFIG 0x00005000 +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR "432" +#define CONFIG_SILENT_CONSOLE 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 0c10294..49919fb 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -50,11 +50,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -88,26 +83,32 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_BSP +#define CONFIG_CMD_ELF + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -258,7 +259,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -276,6 +277,11 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/ml300.h b/include/configs/ml300.h index 6762cd6..0183041 100644 --- a/include/configs/ml300.h +++ b/include/configs/ml300.h @@ -87,13 +87,28 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define REMOVE_COMMANDS (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \ - CFG_CMD_IMLS ) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_NET) \ - & ~REMOVE_COMMANDS) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_IMLS + /* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */ /* 300000000 */ diff --git a/include/configs/ml401.h b/include/configs/ml401.h index 3db2877..7eeae70 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -145,82 +145,50 @@ #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ -#ifdef FLASH - #ifdef RAMENV - #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_MISC |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_IRQ |\ - CFG_CMD_ASKENV |\ - CFG_CMD_BDI |\ - CFG_CMD_RUN |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_IMI |\ - CFG_CMD_NET |\ - CFG_CMD_CACHE |\ - CFG_CMD_FAT |\ - CFG_CMD_EXT2 |\ - CFG_CMD_JFFS2 |\ - CFG_CMD_ECHO |\ - CFG_CMD_IMLS |\ - CFG_CMD_FLASH |\ - CFG_CMD_MFSL |\ - CFG_CMD_PING \ - ) - #else /* !RAMENV */ - #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_MISC |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_IRQ |\ - CFG_CMD_ASKENV |\ - CFG_CMD_BDI |\ - CFG_CMD_RUN |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_IMI |\ - CFG_CMD_NET |\ - CFG_CMD_CACHE |\ - CFG_CMD_IMLS |\ - CFG_CMD_FLASH |\ - CFG_CMD_PING |\ - CFG_CMD_ENV |\ - CFG_CMD_FAT |\ - CFG_CMD_EXT2 |\ - CFG_CMD_JFFS2 |\ - CFG_CMD_ECHO |\ - CFG_CMD_MFSL |\ - CFG_CMD_SAVES \ - ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MFSL +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + +#if defined(FLASH) + #define CONFIG_CMD_ECHO + #define CONFIG_CMD_FLASH + #define CONFIG_CMD_IMLS + #define CONFIG_CMD_JFFS2 + + #if !defined(RAMENV) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_SAVES #endif +#endif -#else /* !FLASH */ - #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_MISC |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_IRQ |\ - CFG_CMD_ASKENV |\ - CFG_CMD_BDI |\ - CFG_CMD_RUN |\ - CFG_CMD_LOADS |\ - CFG_CMD_FAT |\ - CFG_CMD_EXT2 |\ - CFG_CMD_LOADB |\ - CFG_CMD_IMI |\ - CFG_CMD_NET |\ - CFG_CMD_CACHE |\ - CFG_CMD_MFSL |\ - CFG_CMD_PING \ - ) -#endif /* !FLASH */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) /* JFFS2 partitions */ #define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ #define MTDIDS_DEFAULT "nor0=ml401-0" diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index 2028767..4461bdf 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -63,12 +63,23 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_JFFS2)) +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.30.2 @@ -81,7 +92,7 @@ #define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" #define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index e3899a5..e0a827f 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -37,28 +37,35 @@ /* - * Supported commands - */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DTT) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DTT /* diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 04f1f24..ea5a44b 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -101,12 +101,18 @@ #undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_KEYBOARD 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_AT91C_PQFP_UHPBUG 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE +#define CFG_USB_OHCI_SLOT_NAME "at91rm9200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #undef CONFIG_HARD_I2C #ifdef CONFIG_HARD_I2C @@ -123,40 +129,56 @@ #define CONFIG_BOOTDELAY 3 -#ifdef CONFIG_HARD_I2C -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_MISC)) -#else -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB | \ - CFG_CMD_CACHE) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ - CFG_CMD_LOADS )) +#if !defined(CONFIG_HARD_I2C) #define CONFIG_TIMESTAMP #endif -#define CFG_LONGHELP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_HARD_I2C) + + #define CONFIG_CMD_DATE + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C + #define CONFIG_CMD_MISC + +#else + + #define CONFIG_CMD_USB + #define CONFIG_CMD_CACHE + + #undef CONFIG_CMD_AUTOSCRIPT + #undef CONFIG_CMD_BDI + #undef CONFIG_CMD_FPGA + #undef CONFIG_CMD_IMI + #undef CONFIG_CMD_LOADS + #undef CONFIG_CMD_MISC + +#endif + + +#define CFG_LONGHELP #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ #define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 243a3f6..f4f33f3 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -146,25 +146,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_CACHE \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C \ - | CFG_CMD_SDRAM \ - | CFG_CMD_EEPROM \ - | CFG_CMD_FLASH \ - | CFG_CMD_ENV \ - | CFG_CMD_BSP \ - | CFG_CMD_DHCP \ - | CFG_CMD_PING \ - | CFG_CMD_DATE) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_PCI +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE + /*set date in u-boot*/ #define CONFIG_RTC_M48T35A @@ -182,7 +191,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ #else @@ -366,9 +375,9 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */ +#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */ #define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ } #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI @@ -387,7 +396,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 7f3dfd5..5125b21 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -78,25 +78,32 @@ #define CONFIG_BAUDRATE 115200 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_REGINFO | \ - CFG_CMD_ELF) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ELF -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/msdk mem=48M" #define CONFIG_BOOTFILE "mx1ads" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 9816be8..d527d09 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -34,22 +34,30 @@ #undef _CONFIG_UART4 /* internal uart 4 */ #undef CONFIG_SILENT_CONSOLE /* use this to disable output */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ - & ~CFG_CMD_NET \ - & ~CFG_CMD_PING \ - & ~CFG_CMD_DHCP \ - | CFG_CMD_JFFS2 \ - ) - -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP + /* * Boot options. Setting delay to -1 stops autostart count down. @@ -160,7 +168,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ /* diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 697796a..33159d3 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -140,42 +140,37 @@ #define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0" #define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)" -#if 0 -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_LOADB | \ - CFG_CMD_NET | \ - CFG_CMD_MEMORY | \ - CFG_CMD_PING | \ - CFG_CMD_RUN) -#else -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_NAND | \ - CFG_CMD_IMI | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_LOADB | \ - CFG_CMD_NET | \ - CFG_CMD_MEMORY | \ - CFG_CMD_PING | \ - CFG_CMD_RUN) +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#endif -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -#define CONFIG_LOOPW +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_LOOPW #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index 0b1541d..1d691f9 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -69,33 +69,28 @@ #define CONFIG_BAUDRATE 38400 -/*********************************************************** - * Command definition - ***********************************************************/ -#if 0 /* @TODO */ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_NAND |*/ \ - /*CFG_CMD_EEPROM |*/ \ - /*CFG_CMD_I2C |*/ \ - /*CFG_CMD_USB |*/ \ - CFG_CMD_REGINFO | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF) -#else -#define CONFIG_COMMANDS \ - (CONFIG_CMD_BDI | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_LOADB | \ - CFG_CMD_LOADS | \ - CFG_CMD_MEMORY) -#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 3 /*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ @@ -108,7 +103,7 @@ /*#define CONFIG_BOOTFILE "elinos-lart" */ /*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 63d0da7..f1d73e4 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -37,11 +37,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -73,8 +68,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#define ADD_PCI_CMD CFG_CMD_PCI - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -82,20 +75,29 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - ADD_PCI_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -246,7 +248,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -262,6 +264,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index fe4e638..bc2fd33 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -41,6 +41,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_OCOTEA 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -136,7 +137,7 @@ #define CFG_FLASH_WORD_SIZE unsigned char #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -231,26 +232,38 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -259,7 +272,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -293,7 +306,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ @@ -310,7 +322,7 @@ */ #define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -322,7 +334,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 016d3d8..8623ed3 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -86,11 +86,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -98,7 +111,7 @@ #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index c6ca689..74bba05 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -81,11 +81,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -93,7 +106,7 @@ #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index f28ede0..734f354 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -82,11 +82,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -98,7 +111,7 @@ #define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ #define CONFIG_BOOTFILE "uImage" /* file to load */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 5837461..8ae8efe 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -119,15 +119,34 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifdef CFG_NAND_BOOT -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2) + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_I2C + #define CONFIG_CMD_NAND + #define CONFIG_CMD_JFFS2 #else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_I2C + #define CONFIG_CMD_JFFS2 + + #undef CONFIG_CMD_AUTOSCRIPT #endif -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + /* * Board NAND Info. diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 5db4f52..16ce2f6 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -86,11 +86,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -102,7 +115,7 @@ #define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ #define CONFIG_BOOTFILE "uImage" /* file to load */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index fda55cf..c4d253a 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -90,14 +90,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT /* - * This must be included AFTER the definition of CONFIG_COMMANDS (if any) + * Command line configuration. */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + -#include <cmd_confdefs.h> #include <configs/omap730.h> #include <configs/h2_p2_dbg_board.h> @@ -112,7 +122,7 @@ #define CONFIG_SERVERIP 192.150.0.100 #define CONFIG_BOOTFILE "uImage" /* File to load */ -#if defined (CONFIG_COMMANDS) && defined (CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* Speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* Which serial port to use */ #endif diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 54462f0..8ae38cb 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -251,26 +251,36 @@ #endif #define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_PCI | \ - CFG_CMD_CACHE | \ - CFG_CMD_SDRAM) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_SDRAM + /*----------------------------------------------------------------------- * Miscellaneous configurable options @@ -280,7 +290,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -421,7 +431,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index aa0901f..51f19a1 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -35,6 +35,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_P3P440 1 /* Board is P3P440 */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ @@ -167,25 +168,37 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -194,7 +207,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -226,7 +239,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CONFIG_DISABLE_PISE_TEST /* disable PISE test (PCIX only)*/ @@ -285,7 +297,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -304,7 +316,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -316,7 +328,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index ed1893f..810e0f0 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -132,11 +132,8 @@ /*---USB -------------------------------------------*/ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION -#else -#define ADD_USB_CMD 0 #endif /*---ATA PCMCIA ------------------------------------*/ @@ -179,11 +176,36 @@ #define CFG_ICACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32 -#define CONFIG_COMMANDS \ - (((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_PING) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | CFG_CMD_IDE | \ - CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \ - CFG_CMD_BDI | CFG_CMD_BEDBUG)) | ADD_USB_CMD) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_RUN +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG #endif /* __CONFIG_H */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 23bdfc8..8e51d2d 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_PCS440EP 1 /* Board is PCS440EP */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -103,21 +104,28 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_ENV_OVERWRITE 1 /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +#define ENV_NAME_REVLEV "revision_level" +#define ENV_NAME_SOLDER "solder_switch" +#define ENV_NAME_DIP "dip" + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define SPD_EEPROM_ADDRESS {0x50} +#define CONFIG_PROG_SDRAM_TLB 1 /*----------------------------------------------------------------------- * I2C @@ -142,6 +150,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=pcs440ep\0" \ + "use_eeprom_ethaddr=default\0" \ + "cs_test=off\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -172,6 +182,36 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +/* check U-Boot image with SHA1 sum */ +#define CONFIG_SHA1_CHECK_UB_IMG 1 +#define CONFIG_SHA1_START CFG_MONITOR_BASE +#define CONFIG_SHA1_LEN CFG_MONITOR_LEN + +/*----------------------------------------------------------------------- + * Definitions for status LED + */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 + +#define STATUS_LED_BIT 0x08 /* DIAG1 is on GPIO_PPC_1 */ +#define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_BIT1 0x04 /* DIAG2 is on GPIO_PPC_2 */ +#define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_BIT2 0x02 /* DIAG3 is on GPIO_PPC_3 */ +#define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_BIT3 0x01 /* DIAG4 is on GPIO_PPC_4 */ +#define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE3 STATUS_LED_OFF + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + #define CONFIG_BAUDRATE 115200 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -207,37 +247,47 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_USB ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB -#define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_SUPPORT_VFAT /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -266,7 +316,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -315,76 +364,76 @@ /*----------------------------------------------------------------------- * PPC440 GPIO Configuration */ -#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \ +#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ { \ /* GPIO Core 0 */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6 EBC_CS_N(1) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7 EBC_CS_N(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8 EBC_CS_N(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9 EBC_CS_N(4) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO10 EBC_CS_N(5) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO11 EBC_BUS_ERR */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO12 ZII_p0Rxd(0) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO13 ZII_p0Rxd(1) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO14 ZII_p0Rxd(2) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO15 ZII_p0Rxd(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16 ZII_p0Txd(0) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17 ZII_p0Txd(1) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18 ZII_p0Txd(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19 ZII_p0Txd(3) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO20 ZII_p0Rx_er */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO21 ZII_p0Rx_dv */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO22 ZII_p0RxCrs */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23 ZII_p0Tx_er */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24 ZII_p0Tx_en */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO25 ZII_p0Col */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO26 USB2D_RXVALID */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO28 USB2D_TXVALID */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO12 ZII_p0Rxd(0) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO13 ZII_p0Rxd(1) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO14 ZII_p0Rxd(2) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO15 ZII_p0Rxd(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO16 ZII_p0Txd(0) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO17 ZII_p0Txd(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO18 ZII_p0Txd(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO19 ZII_p0Txd(3) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO20 ZII_p0Rx_er */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO21 ZII_p0Rx_dv */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO22 ZII_p0RxCrs */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO23 ZII_p0Tx_er */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO24 ZII_p0Tx_en */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO25 ZII_p0Col */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO26 USB2D_RXVALID */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ }, \ { \ /* GPIO Core 1 */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO32 USB2D_OPMODE0 */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO33 USB2D_OPMODE1 */ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT3 }, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37 UART0_RTS_N */ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT2 }, /* GPIO39 UART0_RI_N UART1_SIN */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO40 UIC_IRQ(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO41 UIC_IRQ(1) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO42 UIC_IRQ(2) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO43 UIC_IRQ(3) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ -{ GPIO1_BASE, GPIO_BI, GPIO_SEL }, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO49 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO50 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO51 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO52 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO53 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO54 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO55 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO56 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO57 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO58 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO59 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO60 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO61 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO62 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO63 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO32 USB2D_OPMODE0 */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO33 USB2D_OPMODE1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO37 UART0_RTS_N */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_BI, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO63 Unselect via TraceSelect Bit */ \ } \ } @@ -393,7 +442,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -405,9 +454,44 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */ + +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_IDE_RESET 1 + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_CF1 + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x0000) + +/* These addresses need to be shifted one place to the left + * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) + * These values are shifted + */ +#define CFG_ATA_PORT_ADDR(port) ((port) << 1) + #endif /* __CONFIG_H */ diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h index 73aa3a8..e3c8843 100644 --- a/include/configs/pcu_e.h +++ b/include/configs/pcu_e.h @@ -89,28 +89,34 @@ * ---------------------------------------------------------------- */ #define CFG_SPI_INIT_OFFSET 0xB00 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_BOOTP_MASK \ - ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 06c6652..5b5b0ef 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -71,25 +71,33 @@ #define CONFIG_BAUDRATE 115200 #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ -#if defined(CONFIG_SCPU) -#define CMD_NAND_ADD 0 -#else -#define CMD_NAND_ADD CFG_CMD_NAND + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING + +#if !defined(CONFIG_SCPU) +#define CONFIG_CMD_NAND #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_NET | \ - CFG_CMD_MII | \ - CMD_NAND_ADD | \ - CFG_CMD_I2C | \ - CFG_CMD_ELF | \ - CFG_CMD_PING) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -/* These are u-boot generic parameters */ -#include <cmd_confdefs.h> #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 7151a9e..18d0c87 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -49,11 +49,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -90,13 +85,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif - -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -106,26 +94,35 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - ADD_PCI_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE + +#ifdef CONFIG_MPC5200 +#define CONFIG_CMD_PCI +#endif + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -263,7 +260,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -281,6 +278,11 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index a6c2371..863029d 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -66,10 +66,23 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -83,7 +96,7 @@ #define CONFIG_INITRD_TAG #define CONFIG_SETUP_MEMORY_TAGS -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 072b9dd..fe7de7b 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -25,75 +25,91 @@ /* * Debug * - * DEBUG - Define this is you want extra debug info - * GTREGREAD - Required to build with debug - * do_bdinfo - Required to build with debug + * DEBUG - Define this is you want extra debug info + * GTREGREAD - Required to build with debug + * do_bdinfo - Required to build with debug */ #undef DEBUG -#define GTREGREAD(x) 0xFFFFFFFF +#ifdef DEBUG +#define GTREGREAD(x) 0xFFFFFFFF #define do_bdinfo(a,b,c,d) - +#endif /* * CPU type * - * CONFIG_7xx - We have a 750 or 755 CPU - * CONFIG_74xx - We have a 7400 CPU - * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) - * CONFIG_BUS_CLK - System bus clock in Hz + * CONFIG_7xx - We have a 750 or 755 CPU + * CONFIG_74xx - We have a 7400 CPU + * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) + * CONFIG_BUS_CLK - System bus clock in Hz */ #define CONFIG_7xx #undef CONFIG_74xx #undef CONFIG_ALTIVEC -#define CONFIG_BUS_CLK 66000000 +#define CONFIG_BUS_CLK 66000000 /* * Monitor configuration * - * CONFIG_COMMANDS - List of command sets to include in shell + * List of command sets to include in shell * * The following command sets have been tested and known to work: * - * CFG_CMD_CACHE - Cache control commands - * CFG_CMD_MEMORY - Memory display, change and test commands - * CFG_CMD_FLASH - Erase and program flash - * CFG_CMD_ENV - Environment commands - * CFG_CMD_RUN - Run commands stored in env vars - * CFG_CMD_ELF - Load ELF files - * CFG_CMD_NET - Networking/file download commands - * CFG_CMD_PING - ICMP Echo Request command - * CFG_CMD_PCI - PCI Bus scanning command + * CMD_CACHE - Cache control commands + * CMD_MEMORY - Memory display, change and test commands + * CMD_FLASH - Erase and program flash + * CMD_ENV - Environment commands + * CMD_RUN - Run commands stored in env vars + * CMD_ELF - Load ELF files + * CMD_NET - Networking/file download commands + * CMD_PIN - ICMP Echo Request command + * CMD_PCI - PCI Bus scanning command */ -#define CONFIG_COMMANDS ( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) | \ - CFG_CMD_FLASH | \ - CFG_CMD_ENV | \ - CFG_CMD_RUN | \ - CFG_CMD_ELF | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_PCI) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI + +#undef CONFIG_CMD_KGDB /* * Serial configuration * * CONFIG_CONS_INDEX - Serial console port number (COM1) - * CONFIG_BAUDRATE - Serial speed + * CONFIG_BAUDRATE - Serial speed */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 /* * PCI config * - * CONFIG_PCI - Enable PCI bus - * CONFIG_PCI_PNP - Enable Plug & Play support + * CONFIG_PCI - Enable PCI bus + * CONFIG_PCI_PNP - Enable Plug & Play support * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup */ @@ -105,9 +121,9 @@ /* * Network config * - * CONFIG_NET_MULTI - Support for multiple network interfaces - * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller - * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM + * CONFIG_NET_MULTI - Support for multiple network interfaces + * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller + * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM */ #define CONFIG_NET_MULTI @@ -130,7 +146,7 @@ * Boot config * * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot - * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) + * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) */ #define CONFIG_BOOTCOMMAND \ @@ -149,87 +165,84 @@ */ -#include <cmd_confdefs.h> - - /* * Memory map * * This board runs in a standard CHRP (Map-B) configuration. * - * Type Start End Size Width Chip Sel + * Type Start End Size Width Chip Sel * ----------- ----------- ----------- ------- ------- -------- - * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 - * User LED's 0x78000000 RCS3 - * UART 0x7C000000 RCS2 - * Mailbox 0xFF000000 RCS1 - * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 + * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 + * User LED's 0x78000000 RCS3 + * UART 0x7C000000 RCS2 + * Mailbox 0xFF000000 RCS1 + * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 * * Flash sectors are laid out as follows. * - * Sector Start End Size Comments + * Sector Start End Size Comments * ------- ----------- ----------- ------- ----------- - * 0 0xFFC00000 0xFFC3FFFF 256KB - * 1 0xFFC40000 0xFFC7FFFF 256KB - * 2 0xFFC80000 0xFFCBFFFF 256KB - * 3 0xFFCC0000 0xFFCFFFFF 256KB - * 4 0xFFD00000 0xFFD3FFFF 256KB - * 5 0xFFD40000 0xFFD7FFFF 256KB - * 6 0xFFD80000 0xFFDBFFFF 256KB - * 7 0xFFDC0000 0xFFDFFFFF 256KB - * 8 0xFFE00000 0xFFE3FFFF 256KB - * 9 0xFFE40000 0xFFE7FFFF 256KB - * 10 0xFFE80000 0xFFEBFFFF 256KB - * 11 0xFFEC0000 0xFFEFFFFF 256KB - * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here - * 13 0xFFF40000 0xFFF7FFFF 256KB - * 14 0xFFF80000 0xFFFBFFFF 256KB - * 15 0xFFFC0000 0xFFFDFFFF 128KB - * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here - * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here - * 18 0xFFFF0000 0xFFFFFFFF 64KB + * 0 0xFFC00000 0xFFC3FFFF 256KB + * 1 0xFFC40000 0xFFC7FFFF 256KB + * 2 0xFFC80000 0xFFCBFFFF 256KB + * 3 0xFFCC0000 0xFFCFFFFF 256KB + * 4 0xFFD00000 0xFFD3FFFF 256KB + * 5 0xFFD40000 0xFFD7FFFF 256KB + * 6 0xFFD80000 0xFFDBFFFF 256KB + * 7 0xFFDC0000 0xFFDFFFFF 256KB + * 8 0xFFE00000 0xFFE3FFFF 256KB + * 9 0xFFE40000 0xFFE7FFFF 256KB + * 10 0xFFE80000 0xFFEBFFFF 256KB + * 11 0xFFEC0000 0xFFEFFFFF 256KB + * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here + * 13 0xFFF40000 0xFFF7FFFF 256KB + * 14 0xFFF80000 0xFFFBFFFF 256KB + * 15 0xFFFC0000 0xFFFDFFFF 128KB + * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here + * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here + * 18 0xFFFF0000 0xFFFFFFFF 64KB */ /* * SDRAM config - see memory map details above. * - * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! - * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) + * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! + * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 0x04000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 0x04000000 /* * Flash config - see memory map details above. * - * CFG_FLASH_BASE - Start address of flash memory - * CFG_FLASH_SIZE - Total size of contiguous flash mem + * CFG_FLASH_BASE - Start address of flash memory + * CFG_FLASH_SIZE - Total size of contiguous flash mem * CFG_FLASH_ERASE_TOUT - Erase timeout in ms * CFG_FLASH_WRITE_TOUT - Write timeout in ms * CFG_MAX_FLASH_BANKS - Number of banks of flash on board * CFG_MAX_FLASH_SECT - Number of sectors in a bank */ -#define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_FLASH_ERASE_TOUT 250000 #define CFG_FLASH_WRITE_TOUT 5000 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 19 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 19 /* * Monitor config - see memory map details above * - * CFG_MONITOR_BASE - Base address of monitor code - * CFG_MALLOC_LEN - Size of malloc pool (128KB) + * CFG_MONITOR_BASE - Base address of monitor code + * CFG_MALLOC_LEN - Size of malloc pool (128KB) */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MALLOC_LEN 0x20000 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_LEN 0x20000 /* @@ -247,16 +260,16 @@ * CFG_PROMPT - Prompt string */ -#define CFG_BARGSIZE 1024 -#define CFG_BOOTMAPSZ 0x800000 -#define CFG_CBSIZE 1024 -#define CFG_LOAD_ADDR 0x100000 +#define CFG_BARGSIZE 1024 +#define CFG_BOOTMAPSZ 0x800000 +#define CFG_CBSIZE 1024 +#define CFG_LOAD_ADDR 0x100000 #define CFG_LONGHELP -#define CFG_MAXARGS 16 -#define CFG_MEMTEST_START 0x00040000 -#define CFG_MEMTEST_END 0x00040100 -#define CFG_PBSIZE 1024 -#define CFG_PROMPT "=> " +#define CFG_MAXARGS 16 +#define CFG_MEMTEST_START 0x00040000 +#define CFG_MEMTEST_END 0x00040100 +#define CFG_PBSIZE 1024 +#define CFG_PROMPT "=> " /* @@ -268,12 +281,12 @@ * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0xFFFE0000 -#define CFG_ENV_SIZE 0x1000 -#define CFG_ENV_ADDR_REDUND 0xFFFE8000 -#define CFG_ENV_SIZE_REDUND 0x1000 -#define CFG_ENV_SECT_SIZE 0x8000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR_REDUND 0xFFFE8000 +#define CFG_ENV_SIZE_REDUND 0x1000 +#define CFG_ENV_SECT_SIZE 0x8000 /* @@ -284,15 +297,15 @@ * copied to top of RAM by the init code. * * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect - * CFG_INIT_RAM_END - Size of Init RAM + * CFG_INIT_RAM_END - Size of Init RAM * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data * CFG_GBL_DATA_OFFSET - Start of global data, top of stack */ -#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) -#define CFG_INIT_RAM_END 0x4000 -#define CFG_GBL_DATA_SIZE 128 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) +#define CFG_INIT_RAM_END 0x4000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) /* @@ -329,71 +342,71 @@ * Cache config * * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) - * CFG_L2 - L2 cache enabled if defined - * L2_INIT - L2 cache init flags - * L2_ENABLE - L2 cache enable flags + * CFG_L2 - L2 cache enabled if defined + * L2_INIT - L2 cache init flags + * L2_ENABLE - L2 cache enable flags */ -#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SIZE 32 #undef CFG_L2 -#define L2_INIT 0 -#define L2_ENABLE 0 +#define L2_INIT 0 +#define L2_ENABLE 0 /* * Clocks config * - * CFG_BUS_HZ - Bus clock frequency in Hz - * CFG_BUS_CLK - As above (?) - * CFG_HZ - Decrementer freq in Hz + * CFG_BUS_HZ - Bus clock frequency in Hz + * CFG_BUS_CLK - As above (?) + * CFG_HZ - Decrementer freq in Hz */ -#define CFG_BUS_HZ CONFIG_BUS_CLK -#define CFG_BUS_CLK CONFIG_BUS_CLK -#define CFG_HZ 1000 +#define CFG_BUS_HZ CONFIG_BUS_CLK +#define CFG_BUS_CLK CONFIG_BUS_CLK +#define CFG_HZ 1000 /* * Serial port config * * CFG_BAUDRATE_TABLE - List of valid baud rates - * CFG_NS16550 - Include the NS16550 driver + * CFG_NS16550 - Include the NS16550 driver * CFG_NS16550_SERIAL - Include the serial (wrapper) driver - * CFG_NS16550_CLK - Frequency of reference clock + * CFG_NS16550_CLK - Frequency of reference clock * CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port - * CFG_NS16550_COM1 - Base address of 1st serial port + * CFG_NS16550_COM1 - Base address of 1st serial port */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_CLK 3686400 +#define CFG_NS16550_CLK 3686400 #define CFG_NS16550_REG_SIZE -8 -#define CFG_NS16550_COM1 0x7C000000 +#define CFG_NS16550_COM1 0x7C000000 /* * PCI Config - Address Map B (CHRP) */ -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x40000000 -#define CFG_PCI_MEM_BUS 0x80000000 -#define CFG_PCI_MEM_PHYS 0x80000000 -#define CFG_PCI_MEM_SIZE 0x7D000000 -#define CFG_ISA_MEM_BUS 0x00000000 -#define CFG_ISA_MEM_PHYS 0xFD000000 -#define CFG_ISA_MEM_SIZE 0x01000000 -#define CFG_PCI_IO_BUS 0x00800000 -#define CFG_PCI_IO_PHYS 0xFE800000 -#define CFG_PCI_IO_SIZE 0x00400000 -#define CFG_ISA_IO_BUS 0x00000000 -#define CFG_ISA_IO_PHYS 0xFE000000 -#define CFG_ISA_IO_SIZE 0x00800000 +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CFG_PCI_MEM_BUS 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x7D000000 +#define CFG_ISA_MEM_BUS 0x00000000 +#define CFG_ISA_MEM_PHYS 0xFD000000 +#define CFG_ISA_MEM_SIZE 0x01000000 +#define CFG_PCI_IO_BUS 0x00800000 +#define CFG_PCI_IO_PHYS 0xFE800000 +#define CFG_PCI_IO_SIZE 0x00400000 +#define CFG_ISA_IO_BUS 0x00000000 +#define CFG_ISA_IO_PHYS 0xFE000000 +#define CFG_ISA_IO_SIZE 0x00800000 #define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS -#define CFG_ISA_IO CFG_ISA_IO_PHYS -#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS +#define CFG_ISA_IO CFG_ISA_IO_PHYS +#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS /* @@ -408,12 +421,12 @@ /* * Boot flags * - * BOOTFLAG_COLD - Indicates a power-on boot - * BOOTFLAG_WARM - Indicates a software reset + * BOOTFLAG_COLD - Indicates a power-on boot + * BOOTFLAG_WARM - Indicates a software reset */ -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 #endif /* __CONFIG_H */ diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index d671dcc..fb5ae99 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -169,8 +169,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ @@ -261,13 +260,17 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_NFS */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS + +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS + /* undef this to save memory */ #define CFG_LONGHELP @@ -275,14 +278,20 @@ /* Monitor Command Prompt */ #define CFG_PROMPT "=> " -/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_REGINFO | \ - CFG_CMD_MEMTEST | \ - CFG_CMD_MII | \ - CFG_CMD_IMMAP) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_CMD_MII +#define CONFIG_CMD_IMMAP + +#undef CONFIG_CMD_KGDB /* Where do the internal registers live? */ @@ -298,13 +307,10 @@ #define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -477,7 +483,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/purple.h b/include/configs/purple.h index 2ecb7fb..6eb618e 100644 --- a/include/configs/purple.h +++ b/include/configs/purple.h @@ -81,8 +81,23 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + #define CFG_SDRAM_BASE 0x80000000 diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index e5e2772..0e884fc 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -102,10 +102,25 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_DHCP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DHCP + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 40000" @@ -192,7 +207,7 @@ /* "protect off" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/quantum.h b/include/configs/quantum.h index 21ec5ac..f49e2b0 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -92,18 +92,28 @@ #define CFG_NVRAM_SIZE 2048 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ #define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" @@ -113,7 +123,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -172,7 +182,7 @@ #endif /*%%% #define CFG_FLASH_BASE 0xFFF00000 */ -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -222,7 +232,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/r5200.h b/include/configs/r5200.h index e1e406b..0e743bb 100644 --- a/include/configs/r5200.h +++ b/include/configs/r5200.h @@ -66,10 +66,27 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB + /* Note: We only copy one sectors worth of application code from location * 10200000 for speed purposes. Increase the size if necessary */ @@ -79,7 +96,7 @@ #define CFG_PROMPT "u-boot> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/rmu.h b/include/configs/rmu.h index b319cf4..2ca60b7 100644 --- a/include/configs/rmu.h +++ b/include/configs/rmu.h @@ -87,17 +87,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ #define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" @@ -108,7 +119,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -152,7 +163,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE (0-flash_info[0].size) /* Put flash at end */ -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -193,7 +204,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 6c9e392..814082c 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -64,8 +64,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ @@ -102,7 +101,23 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_KGDB) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_KGDB + /* Define this if you want to boot from 0x00000100. If you don't define * this, you will need to program the bootloader to 0xfff00000, and @@ -112,15 +127,12 @@ */ #define CFG_RSD_BOOT_LOW 1 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTARGS "devfs=mount root=ramfs" #define CONFIG_ETHADDR 08:00:3e:26:0a:5a #define CONFIG_NETMASK 255.255.0.0 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -130,7 +142,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -287,7 +299,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 97b52fa..c474acd 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -159,8 +159,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC @@ -470,16 +469,18 @@ #define CONFIG_BOOTP_RANDOM_DELAY /* Randomize the BOOTP retry delay */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS (up to 2 servers) - * - Send hostname to DHCP server +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + /* undef this to save memory */ #define CFG_LONGHELP @@ -502,31 +503,28 @@ */ #define CONFIG_VERSION_VARIABLE -/* What U-Boot subsytems do you want enabled? */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_KGDB + #ifdef CONFIG_ETHER_ON_FCC -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_I2C | \ - CFG_CMD_SPI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_PING | \ - CFG_CMD_MII ) -#else -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_I2C | \ - CFG_CMD_SPI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_PING ) -#endif /* CONFIG_ETHER_ON_FCC */ +#define CONFIG_CMD_MII +#endif + /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 @@ -544,10 +542,6 @@ #define CONFIG_SACSng 1 /* munged for the SACSng */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - - /* * Miscellaneous configurable options */ @@ -589,7 +583,7 @@ #define CFG_TFTP_TIMEOUT_COUNT 5 /* How many timeouts TFTP will allow */ /* before it gives up. */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -732,7 +726,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index 866f7b0..b4a063a 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -82,24 +82,29 @@ #define CONFIG_BAUDRATE 115200 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_NAND |*/ \ - /*CFG_CMD_EEPROM |*/ \ - /*CFG_CMD_I2C |*/ \ - /*CFG_CMD_USB |*/ \ - CFG_CMD_REGINFO | \ - CFG_CMD_DATE | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off" @@ -110,7 +115,7 @@ /*#define CONFIG_BOOTFILE "elinos-lart" */ #define CONFIG_BOOTCOMMAND "dhcp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ @@ -193,7 +198,7 @@ /*----------------------------------------------------------------------- * NAND flash settings */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -219,7 +224,7 @@ #define NAND_CTL_CLRCLE(nandptr) #define NAND_CTL_SETCLE(nandptr) /* #undef CONFIG_MTD_NAND_VERIFY_WRITE */ -#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ +#endif /* CONFIG_CMD_NAND */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index beff28a..dc906b1 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -84,23 +84,33 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - 0 ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -123,7 +133,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -229,7 +239,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h index d891e07..0e878f0 100644 --- a/include/configs/sbc8240.h +++ b/include/configs/sbc8240.h @@ -75,24 +75,33 @@ #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - 0 ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) + +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM + /* * Miscellaneous configurable options @@ -340,7 +349,7 @@ typedef unsigned int led_id_t; * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 9cf0654..b1d41a6 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -182,8 +182,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC @@ -412,16 +411,18 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_NFS */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS (up to 2 servers) - * - Send hostname to DHCP server +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + /* undef this to save memory */ #define CFG_LONGHELP @@ -444,27 +445,26 @@ */ #define CONFIG_VERSION_VARIABLE -/* What U-Boot subsytems do you want enabled? */ -#ifdef CONFIG_ETHER_ON_FCC -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) -#else -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IMMAP | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) -#endif /* CONFIG_ETHER_ON_FCC */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#undef CONFIG_CMD_KGDB + +#if defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_CMD_MII +#endif + #undef CONFIG_WATCHDOG /* disable the watchdog */ @@ -481,13 +481,11 @@ #define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -627,7 +625,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 65aac5c..1831bef 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -328,7 +328,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C1_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 #define CFG_I2C_OFFSET CFG_I2C2_OFFSET @@ -401,10 +401,10 @@ #define CONFIG_NET_MULTI 1 #endif -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_PHY_BCM5421S 1 #define TSEC1_PHY_ADDR 0x19 #define TSEC2_PHY_ADDR 0x1a @@ -439,40 +439,34 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ - ) + #define CONFG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -483,7 +477,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -504,7 +498,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -655,7 +649,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 6e4fdb2..defc428 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -320,28 +320,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -350,7 +359,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "SBC8560=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -371,7 +380,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -383,7 +392,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h new file mode 100644 index 0000000..68d31ca --- /dev/null +++ b/include/configs/sbc8641d.h @@ -0,0 +1,604 @@ +/* + * Copyright 2007 Wind River Systems <www.windriver.com> + * Copyright 2007 Embedded Specialties, Inc. + * Joe Hamman <joe.hamman@embeddedspecialties.com> + * + * Copyright 2006 Freescale Semiconductor. + * + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * SBC8641D board configuration file + * + * Make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_MPC86xx 1 /* MPC86xx */ +#define CONFIG_MPC8641 1 /* MPC8641 specific */ +#define CONFIG_SBC8641D 1 /* SBC8641D board specific */ +#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ +#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ + +#ifdef RUN_DIAG +#define CFG_DIAG_ADDR 0xff800000 +#endif + +#define CFG_RESET_ADDRESS 0xfff00100 + +#define CONFIG_PCI 1 /* Enable PCIE */ +#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CACHE_LINE_INTERLEAVING 0x20000000 +#define PAGE_INTERLEAVING 0x21000000 +#define BANK_INTERLEAVING 0x22000000 +#define SUPER_BANK_INTERLEAVING 0x23000000 + + +#define CONFIG_ALTIVEC 1 + +/* + * L2CR setup -- make sure this is right for your board! + */ +#define CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE (L2CR_L2E) + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) + +/* + * DDR Setup + */ +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_BASE2 CFG_DDR_SDRAM_BASE2 +#define CONFIG_VERY_BIG_RAM + +#define MPC86xx_DDR_SDRAM_CLK_CNTL + +#if defined(CONFIG_SPD_EEPROM) + /* + * Determine DDR configuration from I2C interface. + */ + #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ + +#else + /* + * Manually set up DDR1 & DDR2 parameters + */ + + #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ + + #define CFG_DDR_CS0_BNDS 0x0000000F + #define CFG_DDR_CS1_BNDS 0x00000000 + #define CFG_DDR_CS2_BNDS 0x00000000 + #define CFG_DDR_CS3_BNDS 0x00000000 + #define CFG_DDR_CS0_CONFIG 0x80010102 + #define CFG_DDR_CS1_CONFIG 0x00000000 + #define CFG_DDR_CS2_CONFIG 0x00000000 + #define CFG_DDR_CS3_CONFIG 0x00000000 + #define CFG_DDR_EXT_REFRESH 0x00000000 + #define CFG_DDR_TIMING_0 0x00220802 + #define CFG_DDR_TIMING_1 0x38377322 + #define CFG_DDR_TIMING_2 0x002040c7 + #define CFG_DDR_CFG_1A 0x43008008 + #define CFG_DDR_CFG_2 0x24401000 + #define CFG_DDR_MODE_1 0x23c00542 + #define CFG_DDR_MODE_2 0x00000000 + #define CFG_DDR_MODE_CTL 0x00000000 + #define CFG_DDR_INTERVAL 0x05080100 + #define CFG_DDR_DATA_INIT 0x00000000 + #define CFG_DDR_CLK_CTRL 0x03800000 + #define CFG_DDR_CFG_1B 0xC3008008 + + #define CFG_DDR2_CS0_BNDS 0x0010001F + #define CFG_DDR2_CS1_BNDS 0x00000000 + #define CFG_DDR2_CS2_BNDS 0x00000000 + #define CFG_DDR2_CS3_BNDS 0x00000000 + #define CFG_DDR2_CS0_CONFIG 0x80010102 + #define CFG_DDR2_CS1_CONFIG 0x00000000 + #define CFG_DDR2_CS2_CONFIG 0x00000000 + #define CFG_DDR2_CS3_CONFIG 0x00000000 + #define CFG_DDR2_EXT_REFRESH 0x00000000 + #define CFG_DDR2_TIMING_0 0x00220802 + #define CFG_DDR2_TIMING_1 0x38377322 + #define CFG_DDR2_TIMING_2 0x002040c7 + #define CFG_DDR2_CFG_1A 0x43008008 + #define CFG_DDR2_CFG_2 0x24401000 + #define CFG_DDR2_MODE_1 0x23c00542 + #define CFG_DDR2_MODE_2 0x00000000 + #define CFG_DDR2_MODE_CTL 0x00000000 + #define CFG_DDR2_INTERVAL 0x05080100 + #define CFG_DDR2_DATA_INIT 0x00000000 + #define CFG_DDR2_CLK_CTRL 0x03800000 + #define CFG_DDR2_CFG_1B 0xC3008008 + + +#endif + +/* #define CFG_ID_EEPROM 1 +#define ID_EEPROM_ADDR 0x57 */ + +/* + * The SBC8641D contains 16MB flash space at ff000000. + */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */ + +/* Flash */ +#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */ +#define CFG_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */ + +/* 64KB EEPROM */ +#define CFG_BR1_PRELIM 0xf0000801 /* port size 16bit */ +#define CFG_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */ + +/* EPLD - User switches, board id, LEDs */ +#define CFG_BR2_PRELIM 0xf1000801 /* port size 16bit */ +#define CFG_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */ + +/* Local bus SDRAM 128MB */ +#define CFG_BR3_PRELIM 0xe0001861 /* port size ?bit */ +#define CFG_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */ +#define CFG_BR4_PRELIM 0xe4001861 /* port size ?bit */ +#define CFG_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */ + +/* Disk on Chip (DOC) 128MB */ +#define CFG_BR5_PRELIM 0xe8001001 /* port size ?bit */ +#define CFG_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* LCD */ +#define CFG_BR6_PRELIM 0xf4000801 /* port size ?bit */ +#define CFG_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* Control logic & misc peripherals */ +#define CFG_BR7_PRELIM 0xf2000801 /* port size ?bit */ +#define CFG_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 131 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_WRITE_SWAPPED_DATA +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_PROTECTION + +#undef CONFIG_CLOCKS_IN_MHZ + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#ifndef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ +#else +#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ +#endif +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree to kernel + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8641@0" +#define OF_SOC "soc@f8000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@f8000000/serial@4500" + +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3100 + +/* + * RapidIO MMU + */ +#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ +#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE +#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_IO_BASE 0xe2000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +#define CFG_PCI2_MEM_BASE 0xa0000000 +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0xe3000000 +#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE +#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ + +#if defined(CONFIG_PCI) + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#undef CFG_SCSI_SCAN_BUS_REVERSE + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CONFIG_DOS_PARTITION +#undef CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SATA_ULI5288 +#define CFG_SCSI_MAX_SCSI_ID 4 +#define CFG_SCSI_MAX_LUN 1 +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE +#endif + +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* #define CONFIG_MII 1 */ /* MII PHY management */ + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" + +#define TSEC1_PHY_ADDR 0x1F +#define TSEC2_PHY_ADDR 0x00 +#define TSEC3_PHY_ADDR 0x01 +#define TSEC4_PHY_ADDR 0x02 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 +#define TSEC4_PHYIDX 0 + +#define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ + +#define CONFIG_ETHPRIME "eTSEC1" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * BAT0 2G Cacheable, non-guarded + * 0x0000_0000 2G DDR + */ +#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) +#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) +#define CFG_IBAT0U CFG_DBAT0U + +/* + * BAT1 1G Cache-inhibited, guarded + * 0x8000_0000 512M PCI-Express 1 Memory + * 0xa000_0000 512M PCI-Express 2 Memory + * Changed it for operating from 0xd0000000 + */ +#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U CFG_DBAT1U + +/* + * BAT2 512M Cache-inhibited, guarded + * 0xc000_0000 512M RapidIO Memory + */ +#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U CFG_DBAT2U + +/* + * BAT3 4M Cache-inhibited, guarded + * 0xf800_0000 4M CCSR + */ +#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U CFG_DBAT3U + +/* + * BAT4 32M Cache-inhibited, guarded + * 0xe200_0000 16M PCI-Express 1 I/O + * 0xe300_0000 16M PCI-Express 2 I/0 + * Note that this is at 0xe0000000 + */ +#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U CFG_DBAT4U + +/* + * BAT5 128K Cacheable, non-guarded + * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) + */ +#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_IBAT5L CFG_DBAT5L +#define CFG_IBAT5U CFG_DBAT5U + +/* + * BAT6 32M Cache-inhibited, guarded + * 0xfe00_0000 32M FLASH + */ +#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT6U CFG_DBAT6U + +#define CFG_DBAT7L 0x00000000 +#define CFG_DBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 +#define CFG_IBAT7U 0x00000000 + +/* + * Environment + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ +#define CFG_ENV_SIZE 0x2000 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#include <config_cmd_default.h> + #define CONFIG_CMD_PING + #define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +/* The mac addresses for all ethernet interface */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 02:E0:0C:00:00:01 +#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD +#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD +#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD +#endif + +#define CONFIG_HAS_ETH1 1 +#define CONFIG_HAS_ETH2 1 +#define CONFIG_HAS_ETH3 1 + +#define CONFIG_IPADDR 192.168.0.50 + +#define CONFIG_HOSTNAME sbc8641d +#define CONFIG_ROOTPATH /opt/eldk/ppc_74xx +#define CONFIG_BOOTFILE uImage + +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_NETMASK 255.255.255.0 + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=uRamdisk\0" \ + "dtbaddr=400000\0" \ + "dtbfile=sbc8641d.dtb\0" \ + "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ + "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ + "maxcpus=1" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" + +#define CONFIG_FLASHBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "bootm ffd00000 ffb00000 ffa00000" + +#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 6b6acfa..cb22536 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -58,7 +58,7 @@ * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB) */ -#define CONFIG_SOLIDCARD3 1 +#define CONFIG_SC3 1 #define CONFIG_4xx 1 #define CONFIG_405GP 1 @@ -68,8 +68,7 @@ * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range * If undefined, IDE access uses a seperat emulation with higher access speed. * Consider to inform your Linux IDE driver about the different addresses! - * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes - * the CFG_CMD_IDE macro! + * IDE_USES_ISA_EMULATION is only used if you define CONFIG_CMD_IDE! */ #define IDE_USES_ISA_EMULATION @@ -134,7 +133,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ #define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n" -#define CONFIG_AUTOBOOT_DELAY_STR "\n" /* 1st "password" */ +#define CONFIG_AUTOBOOT_DELAY_STR "\r" /* 1st "password" */ +#define CONFIG_AUTOBOOT_DELAY_STR2 "\n" /* 1st "password" */ #endif /* @@ -168,25 +168,36 @@ #define CONFIG_MII 1 /* add 405GP MII PHY management */ #define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_NET | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_NAND | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_CACHE | \ - CFG_CMD_ELF ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + + +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_NAND +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ELF + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -276,7 +287,7 @@ * External peripheral base address *----------------------------------------------------------------------- */ -#if !(CONFIG_COMMANDS & CFG_CMD_IDE) +#if !defined(CONFIG_CMD_IDE) #undef CONFIG_IDE_LED /* no led for ide supported */ #undef CONFIG_IDE_RESET /* no reset for ide supported */ @@ -285,7 +296,7 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ -#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ +#else #define CONFIG_START_IDE 1 /* check, if use IDE */ #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ @@ -345,7 +356,7 @@ #endif /* IDE_USES_ISA_EMULATION */ -#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ +#endif /* #define CFG_KEY_REG_BASE_ADDR 0xF0100000 @@ -436,7 +447,7 @@ extern unsigned long offsetOfEnvironment; #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index d7d07a6..8491d97 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -64,24 +64,37 @@ */ #define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024) - #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NET +#define CONFIG_CMD_EEPROM #define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" /* #define CONFIG_BOOTCOMMAND "bootm 38000000" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif - /* * Miscellaneous configurable options */ @@ -104,7 +117,6 @@ /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Physical Memory Map */ @@ -113,8 +125,6 @@ /*----------------------------------------------------------------------- * FLASH and environment organization */ - - #define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ @@ -125,11 +135,9 @@ #define CONFIG_SPI_EEPROM /* Support for SPI EEPROMs (AT25128) */ #define CONFIG_MW_EEPROM /* Support for MicroWire EEPROMs (AT93LC46) */ - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE - /* Environment in EEPROM */ #define CFG_ENV_IS_IN_EEPROM 1 #define CONFIG_SPI @@ -182,6 +190,15 @@ #undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ /************************************************************ +*SATA/Native Stuff +************************************************************/ +#define CFG_SATA_SUPPORTED 1 +#define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */ +#define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */ +#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS) +#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */ + +/************************************************************ * ATAPI support (experimental) ************************************************************/ #define CONFIG_ATAPI /* enable ATAPI Support */ @@ -200,7 +217,6 @@ #define CONFIG_I8042_KBD #define CFG_ISA_IO 0 - /************************************************************ * RTC ***********************************************************/ diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index a8e3555..c6f7f15 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -64,16 +64,34 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_EEPROM + #define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) " #define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index a4249c4..d140241 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -36,20 +36,27 @@ /* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_DHCP \ - ) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_AUTOSCRIPT -#include <cmd_confdefs.h> /* * Boot options. Setting delay to -1 stops autostart count down. @@ -182,7 +189,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_FIRST_SECTOR 5 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 23243a4..3f75a44 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -37,6 +37,7 @@ #else #define CONFIG_440GRX 1 /* Specific PPC440GRx */ #endif +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ /* Detect Sequoia PLL input clock automatically via CPLD bit */ #define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \ @@ -58,6 +59,7 @@ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ #define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 @@ -80,7 +82,7 @@ #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR /*----------------------------------------------------------------------- * Serial Port @@ -125,7 +127,7 @@ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -297,9 +299,6 @@ /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE -#define CMD_USB CFG_CMD_USB -#else -#define CMD_USB 0 /* no USB on 440GRx */ #endif /* CONFIG_440EPX */ /* Partitions */ @@ -307,37 +306,68 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DTT | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CMD_USB) -#define CONFIG_SUPPORT_VFAT +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#ifdef CONFIG_440EPX +#define CONFIG_CMD_USB +#endif + + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_UART | \ + CFG_POST_I2C | \ + CFG_POST_CACHE | \ + CFG_POST_FPU | \ + CFG_POST_ETHER | \ + CFG_POST_SPR) + +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ + +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +#define CONFIG_SUPPORT_VFAT /*----------------------------------------------------------------------- * Miscellaneous configurable options *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -370,7 +400,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -428,7 +457,7 @@ *----------------------------------------------------------------------*/ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -440,7 +469,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/shannon.h b/include/configs/shannon.h index 572985b..c1fa53f 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -66,21 +66,28 @@ #define CONFIG_BAUDRATE 115200 -#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_IDE) -#endif /* 0 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" #define CONFIG_NETMASK 255.255.0.0 #define CONFIG_BOOTCOMMAND "help" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index a137f9d..05f6053 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -86,24 +86,32 @@ /* Use s3c2400's RTC */ #define CONFIG_RTC_S3C24X0 1 -#ifndef USE_920T_MMU -#define CONFIG_COMMANDS_tmp ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ - CFG_CMD_DATE | \ - CFG_CMD_SNTP ) -#else -#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_SNTP ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_HWFLOW) + #define CONFIG_CONFIG_HWFLOW #endif -#ifdef CONFIG_HWFLOW -#define CONFIG_COMMANDS (CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW) -#else -#define CONFIG_COMMANDS CONFIG_COMMANDS_tmp +#if !defined(USE_920T_MMU) + #undef CONFIG_CMD_CACHE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #if 0 @@ -118,7 +126,7 @@ #define CONFIG_BOOTCOMMAND "tftp; bootm" #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 7edec0d..ca404ff 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -72,22 +72,26 @@ #define CONFIG_BAUDRATE 115200 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_NAND |*/ \ - /*CFG_CMD_EEPROM |*/ \ - /*CFG_CMD_I2C |*/ \ - /*CFG_CMD_USB |*/ \ - CFG_CMD_REGINFO | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF + #define CONFIG_BOOTDELAY 3 /*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ @@ -98,7 +102,7 @@ /*#define CONFIG_BOOTFILE "elinos-lart" */ /*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index 185c2d4..ad68c75 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -42,11 +42,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -65,33 +60,41 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -319,7 +322,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -338,9 +341,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index 4937638..fe014ea 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -39,12 +39,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -69,30 +63,35 @@ #define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS #define CONFIG_PCI_CFG_SIZE 0x01000000 + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP | \ - 0) - -/* CFG_CMD_MII | \ */ -/* CFG_CMD_USB | \ */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + /* * Default Environment @@ -268,7 +267,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -284,6 +283,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 09bbebd..b4ab9ad 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -80,24 +80,33 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#ifndef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_DATE \ - | CFG_CMD_ECHO \ - | CFG_CMD_IMMAP \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_PING \ - | CFG_CMD_DHCP \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) - /* & ~( CFG_CMD_NET)) */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII -#endif /* !CONFIG_COMMANDS */ +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -107,7 +116,7 @@ #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -194,7 +203,7 @@ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#ifdef CFG_CMD_DATE +#ifdef CONFIG_CMD_DATE # define CONFIG_RTC_DS3231 # define CFG_I2C_RTC_ADDR 0x68 #endif @@ -202,7 +211,7 @@ /*----------------------------------------------------------------------- * I2C configuration */ -#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) /* enable I2C and select the hardware/software driver */ #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index fd138a5..4b618f3 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -44,11 +44,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -88,12 +83,6 @@ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ -#ifdef CONFIG_PCI -#define ADD_PCI_CMD CFG_CMD_PCI -#else -#define ADD_PCI_CMD 0 -#endif - /* * Video console */ @@ -110,12 +99,6 @@ #define CFG_CONSOLE_IS_IN_ENV #endif -#ifdef CONFIG_VIDEO -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -124,10 +107,7 @@ /* USB */ #ifdef CONFIG_STK52XX #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif /* POST support */ @@ -136,43 +116,60 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif -/* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) -#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) -#else -#define ADD_IDE_CMD 0 -#endif /* - * Supported commands + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_STK52XX + #define CONFIG_CMD_USB + #define CONFIG_CMD_FAT +#endif + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_PCI + #define CONFIG_CMD_PCI +#endif + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -226,7 +223,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ @@ -406,7 +403,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -425,9 +422,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 625cf20..1f41cf7 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -230,10 +230,10 @@ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 @@ -298,34 +298,38 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_MII | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV)) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #endif + #define CONFIG_CMD_ELF +#endif + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -334,7 +338,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "GPPP=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -355,7 +359,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -367,7 +371,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 1978a32..55e2c8d 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -42,20 +42,20 @@ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/ -#undef CONFIG_PCI /* pci ethernet support */ -#define CONFIG_TSEC_ENET /* tsec ethernet support*/ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ +#define CONFIG_PCI /* PCI ethernet support */ +#define CONFIG_TSEC_ENET /* tsec ethernet support*/ +#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ /* sysclk for MPC85xx */ -#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ +#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ /* Blinkin' LEDs for Robert :-) */ @@ -64,23 +64,23 @@ /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00200000 /* memtest region */ -#define CFG_MEMTEST_END 0x00400000 +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 -/* Localbus connector. There are many options that can be +/* Localbus connector. There are many options that can be * connected here, including sdram or lots of flash. * This address, however, is used to configure a 256M local bus * window that includes the Config latch below. */ -#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ +#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ #define CFG_LBC_OPTION_SIZE 256 /* 256MB */ /* There are various flash options used, we configure for the largest, @@ -88,16 +88,16 @@ * sizes. */ #ifdef CONFIG_STXSSA_4M -#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ +#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ #else -#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ +#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ #endif #define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */ #define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7) #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 -#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -110,22 +110,22 @@ */ #define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */ #define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */ -#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ +#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else -#undef CFG_RAMBOOT +#undef CFG_RAMBOOT #endif #ifdef CFG_RAMBOOT -#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */ +#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */ #else -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ +#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ @@ -140,14 +140,14 @@ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */ +#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */ #undef CONFIG_CLOCKS_IN_MHZ /* local bus definitions */ -#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ +#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ #define CFG_OR2_PRELIM 0xfc006901 -#define CFG_LBC_LCRR 0x00030004 /* local bus freq */ +#define CFG_LBC_LCRR 0x00030004 /* local bus freq */ #define CFG_LBC_LBCR 0x00000000 #define CFG_LBC_LSRT 0x20000000 #define CFG_LBC_MRTPR 0x20000000 @@ -158,52 +158,52 @@ #define CFG_LBC_LSDMR_5 0x4061b723 #define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 -#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ /* Serial Port */ #define CONFIG_CONS_INDEX 2 #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_CLK get_bus_freq(0) #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ -#ifdef CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif /* I2C */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #if 0 -#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */ #else /* I did the 'if 0' so we could keep the syntax above if ever needed. */ #undef CFG_I2C_NOPROBES #endif #define CFG_I2C_OFFSET 0x3000 -/* I2C EEPROM. AT24C32, we keep our environment in here. +/* I2C EEPROM. AT24C32, we keep our environment in here. */ #define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */ #define CFG_I2C_EEPROM_ADDR_LEN 2 @@ -232,35 +232,35 @@ #if defined(CONFIG_PCI) /* PCI Ethernet card */ #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP +#define CONFIG_EEPRO100 +#define CONFIG_TULIP #if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ #endif -#undef CONFIG_PCI_SCAN_SHOW -#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +#define CONFIG_PCI_SCAN_SHOW +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 @@ -270,9 +270,9 @@ #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ -#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ +#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */ +#undef CONFIG_ETHER_NONE /* define if ether on something else */ +#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ #if (CONFIG_ETHER_INDEX == 2) /* @@ -281,19 +281,19 @@ * - Select bus for bd/buffers * - Full duplex */ - #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CFG_CPMFCR_RAMTYPE 0 + #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) + #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) + #define CFG_CPMFCR_RAMTYPE 0 #if 0 - #define CFG_FCC_PSMR (FCC_PSMR_FDE) + #define CFG_FCC_PSMR (FCC_PSMR_FDE) #else - #define CFG_FCC_PSMR 0 + #define CFG_FCC_PSMR 0 #endif #define FETH2_RST 0x01 #elif (CONFIG_ETHER_INDEX == 3) /* need more definitions here for FE3 */ #define FETH3_RST 0x80 -#endif /* CONFIG_ETHER_INDEX */ +#endif /* CONFIG_ETHER_INDEX */ /* MDIO is done through the TSEC0 control. */ @@ -325,34 +325,39 @@ #define CONFIG_TIMESTAMP /* Print image info with ts */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_MII | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV)) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #endif + #define CONFIG_CMD_ELF #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -361,7 +366,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "SSA=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -382,7 +387,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -394,7 +399,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -415,13 +420,13 @@ */ #ifdef CFG_ENV_IS_IN_EEPROM /* use restricted "standard" environment */ -#define CONFIG_BAUDRATE 38400 +#define CONFIG_BAUDRATE 38400 #define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ #define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000" #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate" #define CONFIG_SERVERIP 192.168.85.1 -#define CONFIG_IPADDR 192.168.85.60 +#define CONFIG_IPADDR 192.168.85.60 #define CONFIG_GATEWAYIP 192.168.85.1 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_HOSTNAME STX_SSA @@ -431,7 +436,7 @@ #else /* ENV IS IN FLASH -- use a full-blown envionment */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 614a046..0dbf4b7 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -77,7 +77,16 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -100,19 +109,22 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_MII | \ - CFG_CMD_NFS) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -122,7 +134,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -213,7 +225,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index 8224555..08ac9cb 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -55,10 +55,21 @@ #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) -#define CONFIG_COMMANDS (CONFIG__CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CFG_UART1_BASE (0xFFFF2000) #define CONFIG_SERIAL_BASE CFG_UART1_BASE diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 92ee8cb..3b90f3c 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -125,22 +125,32 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ -/* CFG_CMD_IDE |*/ \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_DATE + + #define CFG_NAND_LEGACY /* @@ -153,7 +163,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -246,7 +256,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 2b28f93..baa4fbd 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -30,6 +30,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_TAISHAN 1 /* Board is taishan */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -217,8 +218,8 @@ #define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ +#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ +#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ #define CONFIG_PHY2_ADDR 0x1 #define CONFIG_PHY3_ADDR 0x3 #define CONFIG_ET1011C_PHY 1 @@ -233,27 +234,36 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -/*----------------------------------------------------------------------- - * Console/Commands/Parser - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_DTT | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -262,7 +272,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -297,7 +307,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ @@ -315,7 +324,7 @@ *----------------------------------------------------------------------*/ #define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -327,7 +336,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h index dac1eb7..a21af21 100644 --- a/include/configs/tb0229.h +++ b/include/configs/tb0229.h @@ -87,13 +87,27 @@ /*#define CONFIG_BOOTCOMMAND "run flash_local" */ #define CONFIG_BOOTCOMMAND "run netboot" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_PCI | \ - CFG_CMD_ELF ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI +#define CONFIG_CMD_ELF + /* * Miscellaneous configurable options diff --git a/include/configs/trab.h b/include/configs/trab.h index a2dc8e7..dbccea2 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -80,10 +80,17 @@ #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* USB stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 + +#define CFG_USB_OHCI_REGS_BASE 0x14200000 +#define CFG_USB_OHCI_SLOT_NAME "s3c2400" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + /* * Size of malloc() pool */ @@ -130,60 +137,50 @@ /* Use s3c2400's RTC */ #define CONFIG_RTC_S3C24X0 1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + #ifdef CONFIG_HWFLOW -#define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW -#else -#define CONFIG_COMMANDS_ADD_HWFLOW 0 + #define CONFIG_CMD_HWFLOW #endif #ifdef CONFIG_VFD -#define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD -#else -#define CONFIG_COMMANDS_ADD_VFD 0 + #define CONFIG_CMD_VFD #endif #ifdef CONFIG_DRIVER_S3C24X0_I2C -#define CONFIG_COMMANDS_ADD_EEPROM CFG_CMD_EEPROM -#define CONFIG_COMMANDS_I2C CFG_CMD_I2C -#else -#define CONFIG_COMMANDS_ADD_EEPROM 0 -#define CONFIG_COMMANDS_I2C 0 + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C #endif #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ - CONFIG_COMMANDS_ADD_HWFLOW | \ - CONFIG_COMMANDS_ADD_VFD | \ - CONFIG_COMMANDS_ADD_EEPROM | \ - CONFIG_COMMANDS_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CONFIG_COMMANDS_ADD_HWFLOW | \ - CONFIG_COMMANDS_ADD_VFD | \ - CONFIG_COMMANDS_ADD_EEPROM | \ - CONFIG_COMMANDS_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) + #undef CONFIG_CMD_CACHE #endif + /* moved up */ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 5 #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ #define CONFIG_PREBOOT "echo;echo *** booting ***;echo" @@ -296,7 +293,7 @@ #define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/uc100.h b/include/configs/uc100.h index c4e629a..92148e2 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -98,7 +98,15 @@ #undef CONFIG_STATUS_LED /* no status-led */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -117,32 +125,32 @@ CFG_POST_SPR ) #undef CONFIG_POST + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 +#define CONFIG_CMD_DIAG #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP ) #define CONFIG_NETCONSOLE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -156,7 +164,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -246,7 +254,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/uc101.h b/include/configs/uc101.h index ff061ee..3b471d0 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -38,11 +38,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* @@ -55,25 +50,34 @@ /* Partitions */ #define CONFIG_DOS_PARTITION + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_DTT | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_NFS | \ - CFG_CMD_MII | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DTT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NFS +#define CONFIG_CMD_MII +#define CONFIG_CMD_SNTP + #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -245,7 +249,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -264,9 +268,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index e5d4397..cd00c49 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -86,18 +86,36 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \ - | CFG_CMD_FLASH | CFG_CMD_MEMORY \ - | CFG_CMD_ENV | CFG_CMD_CONSOLE \ - | CFG_CMD_LOADS | CFG_CMD_LOADB \ - | CFG_CMD_IMI | CFG_CMD_CACHE \ - | CFG_CMD_REGINFO | CFG_CMD_NET\ - | CFG_CMD_DHCP | CFG_CMD_I2C \ - | CFG_CMD_DATE) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_ENV +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE /* @@ -403,7 +421,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/v37.h b/include/configs/v37.h index a2e99b5..0407253 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -76,16 +76,30 @@ #define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_DATE + /* * JFFS2 partitions @@ -105,15 +119,12 @@ #define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)" */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -194,7 +205,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 0b7b19e..c0b1a15 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -46,11 +46,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -89,28 +84,37 @@ #define CONFIG_USB_CLOCK 0x0001BBBB #define CONFIG_USB_CONFIG 0x00001000 + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_SDRAM | \ - CFG_CMD_DATE | \ - CFG_CMD_USB | \ - CFG_CMD_FAT) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT + + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* * Boot low with 16 MB Flash @@ -254,7 +258,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -270,6 +274,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 16db43b..d250150 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -96,14 +96,29 @@ #define CFG_SERIAL0 0x101F1000 #define CFG_SERIAL1 0x101F2000 -#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV) -/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */ +/* + * Command line configuration. + */ + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_BDI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=25,0,0xf1010000,0xf1010010,eth0" diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 06d8536..561a8bc 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -89,34 +89,38 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#ifdef CONFIG_SPLASH_SCREEN -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#else -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_SPLASH_SCREEN) + #define CONFIG_CMD_BMP #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -131,7 +135,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -214,7 +218,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 4e97b01..7cab31d 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -131,33 +131,38 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#ifdef VOICEBLUE_SMALL_FLASH -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_RUN) -#else -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_ENV | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_JFFS2) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + +#if !defined(VOICEBLUE_SMALL_FLASH) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_JFFS2 #endif -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #define CONFIG_LOOPW #ifdef VOICEBLUE_SMALL_FLASH @@ -220,8 +225,6 @@ #endif /* VOICEBLUE_SMALL_FLASH */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options diff --git a/include/configs/walnut.h b/include/configs/walnut.h index b34dc71..180549e 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -98,26 +98,38 @@ #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -128,7 +140,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -283,7 +295,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -340,7 +352,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index 47251bb..c67b301 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -36,18 +36,24 @@ /* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_NET \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ -/* | CFG_CMD_JFFS2 */ \ - ) -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_AUTOSCRIPT + /* * Boot options. Setting delay to -1 stops autostart count down. @@ -152,7 +158,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_FIRST_SECTOR 5 diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 1039762..7418986 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -64,15 +64,29 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_DTT) | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_NFS | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_DTT + #define CONFIG_ETHADDR 08:00:3e:26:0a:5b #define CONFIG_NETMASK 255.255.255.0 @@ -86,7 +100,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 825bfd1..bcd16ec 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -81,14 +81,26 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C + #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index dc702cf..5733933 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -102,10 +102,26 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_PING | CFG_CMD_JFFS2) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_PING +#define CONFIG_CMD_JFFS2 + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index b4c720d..35001d7 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -118,27 +118,39 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) -#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_IRQ |\ - CFG_CMD_BDI |\ - CFG_CMD_NET |\ - CFG_CMD_IMI |\ - CFG_CMD_ECHO |\ - CFG_CMD_CACHE |\ - CFG_CMD_RUN |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_ASKENV |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_MISC |\ - CFG_CMD_FAT |\ - CFG_CMD_EXT2 |\ - CFG_CMD_PING \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_NET +#define CONFIG_CMD_IMI +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MISC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_PING + /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index b68ae54..6a5b7f1 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -38,6 +38,7 @@ #define CONFIG_440GR 1 /* Specific PPC440GR support */ #define CONFIG_HOSTNAME yellowstone #endif +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ @@ -122,7 +123,7 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -232,17 +233,20 @@ #ifdef CONFIG_440EP /* USB */ -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE +#define CFG_OHCI_BE_CONTROLLER + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE (CFG_PERIPHERAL_BASE | 0x1000) +#define CFG_USB_OHCI_SLOT_NAME "ppc440" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE -#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2) - #define CONFIG_SUPPORT_VFAT -#else -#define CMD_USB 0 /* no USB on 440GR */ #endif /* CONFIG_440EP */ #ifdef DEBUG @@ -251,32 +255,49 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#ifdef CONFIG_440EP + #define CONFIG_CMD_USB + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -311,7 +332,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -344,7 +364,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -356,7 +376,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 7f8b022..9c536fd 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -136,7 +136,7 @@ /* Don't probe these addrs */ #define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} -/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */ +/* #if defined(CONFIG_CMD_EEPROM) */ /* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ #define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ /* #endif */ @@ -191,24 +191,36 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ @@ -232,7 +244,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -289,7 +301,6 @@ #undef CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #undef CFG_PCI_MASTER_INIT @@ -314,7 +325,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -326,7 +337,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 1e8ed7a..517ecb1 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -76,19 +76,32 @@ #define CONFIG_BAUDRATE 115200 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifdef TURN_ON_ETHERNET -# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) + #define CONFIG_CMD_PING #else -# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_ENV \ - | CFG_CMD_NAND) \ - & ~(CFG_CMD_NET \ - | CFG_CMD_FLASH \ - | CFG_CMD_IMLS)) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_NAND + + #undef CONFIG_CMD_NET + #undef CONFIG_CMD_FLASH + #undef CONFIG_CMD_IMLS #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY -1 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -100,7 +113,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif |