diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/h2_p2_dbg_board.h | 145 | ||||
-rw-r--r-- | include/configs/omap730.h | 287 | ||||
-rw-r--r-- | include/configs/omap730p2.h | 220 |
3 files changed, 652 insertions, 0 deletions
diff --git a/include/configs/h2_p2_dbg_board.h b/include/configs/h2_p2_dbg_board.h new file mode 100644 index 0000000..8a5ec34 --- /dev/null +++ b/include/configs/h2_p2_dbg_board.h @@ -0,0 +1,145 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * TI H2 and P2 Debug Board hardware map + * + * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk) + * Author: MPC-Data Limited + * Dave Peverley + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __INCLUDED_H2_P2_DBH_BOARD_H +#define __INCLUDED_H2_P2_DBH_BOARD_H + + +#include <asm/arch/sizes.h> + + +/* + * The Debug board is designed to function with the P2 Sample, H2 + * Sample and 1610 Innovator boards. The main difference AFAICT is + * the chip selects used with each system ; + * + * P2 Sample : CS1 of OMAP730 is used to select the CPLD & LAN regs + * H2 Sample : CS1a is used to select the CPLD registers. + * + */ + + + +/*************************************************************************** + * CPLD Registers + **************************************************************************/ + +#define H2DBG_CPLD_REVISION 0x04000010 +#define H2DBG_BOARD_REVISION 0x04000012 +#define H2DBG_GPIO_REGISTER 0x04000014 +#define H2DBG_LED_CONTROL 0x04000016 +#define H2DBG_MISC_INPUT 0x04000018 +#define H2DBG_LAN_STATUS 0x0400001A +#define H2DBG_LAN_RESET 0x0400001C +#define H2DBG_ETH_REG_BASE 0x04000300 + + + +/*************************************************************************** + * Ethernet Control Registers + * These are for the LAN91C96 on the debug board + **************************************************************************/ + +/* Bank 0 in IO space */ + +#define ETH_TCR (H2DBG_ETH_REG_BASE + 0x00) /* Transmit Control Register */ +#define ETH_EPH_STATUS (H2DBG_ETH_REG_BASE + 0x02) /* EPH Status Register */ +#define ETH_RCR (H2DBG_ETH_REG_BASE + 0x04) /* Receive Control Register */ +#define ETH_COUNTER (H2DBG_ETH_REG_BASE + 0x06) /* Counter Register */ +#define ETH_MIR (H2DBG_ETH_REG_BASE + 0x08) /* Memory Information Register */ +#define ETH_MCR (H2DBG_ETH_REG_BASE + 0x0A) /* Memory Configuration Register */ + +/* Bank 1 in IO space */ + +#define ETH_CONFIG (H2DBG_ETH_REG_BASE + 0x00) /* Configuration Register */ +#define ETH_BASE (H2DBG_ETH_REG_BASE + 0x02) /* Base Address Register */ +#define ETH_IA0 (H2DBG_ETH_REG_BASE + 0x04) /* Individual Address Register - 0 */ +#define ETH_IA1 (H2DBG_ETH_REG_BASE + 0x05) /* Individual Address Register - 1 */ +#define ETH_IA2 (H2DBG_ETH_REG_BASE + 0x06) /* Individual Address Register - 2 */ +#define ETH_IA3 (H2DBG_ETH_REG_BASE + 0x07) /* Individual Address Register - 3 */ +#define ETH_IA4 (H2DBG_ETH_REG_BASE + 0x08) /* Individual Address Register - 4 */ +#define ETH_IA5 (H2DBG_ETH_REG_BASE + 0x09) /* Individual Address Register - 5 */ +#define ETH_GEN_PURPOSE (H2DBG_ETH_REG_BASE + 0x0A) /* General Address Registers */ +#define ETH_CONTROL (H2DBG_ETH_REG_BASE + 0x0B) /* Control Register */ + +/* Bank 2 in IO space */ + +#define ETH_MMU (H2DBG_ETH_REG_BASE + 0x00) /* MMU Command Register */ +#define ETH_AUTO_TX_START (H2DBG_ETH_REG_BASE + 0x01) /* Auto Tx Start Register */ +#define ETH_PNR (H2DBG_ETH_REG_BASE + 0x02) /* Packet Number Register */ +#define ETH_ARR (H2DBG_ETH_REG_BASE + 0x03) /* Allocation Result Register */ +#define ETH_FIFO (H2DBG_ETH_REG_BASE + 0x04) /* FIFO Ports Register */ +#define ETH_POINTER (H2DBG_ETH_REG_BASE + 0x06) /* Pointer Register */ +#define ETH_DATA_HIGH (H2DBG_ETH_REG_BASE + 0x08) /* Data High Register */ +#define ETH_DATA_LOW (H2DBG_ETH_REG_BASE + 0x0A) /* Data Low Register */ +#define ETH_INT_STATS (H2DBG_ETH_REG_BASE + 0x0C) /* Interrupt Status Register - RO */ +#define ETH_INT_ACK (H2DBG_ETH_REG_BASE + 0x0C) /* Interrupt Acknowledge Register -WO */ +#define ETH_INT_MASK (H2DBG_ETH_REG_BASE + 0x0D) /* Interrupt Mask Register */ + + +#ifndef __ASSEMBLY__ + +/* + * A couple of utility inlines to aid debugging using the LED's on the + * debug board. + */ + +static inline void set_led_state(int state) +{ + static unsigned long hw_led_state = 0; + volatile unsigned short *led_address = 0x04000016; + + hw_led_state = ((unsigned long)state); + *((unsigned short *) (led_address)) = (unsigned short) (~hw_led_state & 0xFFFF); +} + + +static inline void spin_up_leds() +{ + volatile int i, j, k; + + for (k = 0; k < 2; k++) { + for (i = 0; i < 16; i++) { + for (j = 0; j < 5000; j++) { + set_led_state(1 << i); + } + } + for (i = 15; i >= 0; i--) { + for (j = 0; j < 5000; j++) { + set_led_state(1 << i); + } + } + } +} + +#endif /* ! __ASSEMBLY__ */ + +#endif /* ! __INCLUDED_H2_P2_DBH_BOARD_H */ + diff --git a/include/configs/omap730.h b/include/configs/omap730.h new file mode 100644 index 0000000..5fbbeb0 --- /dev/null +++ b/include/configs/omap730.h @@ -0,0 +1,287 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * OMAP730 hardware map + * + * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk) + * Author: MPC-Data Limited + * Dave Peverley + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#ifndef __INCLUDED_OMAP730_H +#define __INCLUDED_OMAP730_H + +#include <asm/arch/sizes.h> + + + + +/*************************************************************************** + * OMAP730 Configuration Registers + **************************************************************************/ + +#define PERSEUS2_MPU_DEV_ID ((unsigned int)(0xFFFE1000)) +#define PERSEUS2_GSM_DEV_ID0 ((unsigned int)(0xFFFE1000)) +#define PERSEUS2_GDM_DEV_ID1 ((unsigned int)(0xFFFE1002)) +#define DSP_CONF ((unsigned int)(0xFFFE1004)) +#define PERSEUS2_MPU_DIE_ID0 ((unsigned int)(0xFFFE1008)) +#define GSM_ASIC_CONF ((unsigned int)(0xFFFE1008)) +#define PERSEUS2_MPU_DIE_ID1 ((unsigned int)(0xFFFE100C)) +#define PERSEUS2_MODE1 ((unsigned int)(0xFFFE1010)) +#define PERSEUS2_GSM_DIE_ID0 ((unsigned int)(0xFFFE1010)) +#define PERSEUS2_GSM_DIE_ID1 ((unsigned int)(0xFFFE1012)) +#define PERSEUS2_MODE2 ((unsigned int)(0xFFFE1014)) +#define PERSEUS2_GSM_DIE_ID2 ((unsigned int)(0xFFFE1014)) +#define PERSEUS2_GSM_DIE_ID3 ((unsigned int)(0xFFFE1016)) +#define PERSEUS2_ANALOG_CELLS_CONF ((unsigned int)(0xFFFE1018)) +#define SPECCTL ((unsigned int)(0xFFFE101C)) +#define SPARE1 ((unsigned int)(0xFFFE1020)) +#define SPARE2 ((unsigned int)(0xFFFE1024)) +#define GSM_PBG_IRQ ((unsigned int)(0xFFFE1028)) +#define DMA_REQ_CONF ((unsigned int)(0xFFFE1030)) +#define PE_CONF_NO_DUAL ((unsigned int)(0xFFFE1060)) +#define PERSEUS2_IO_CONF0 ((unsigned int)(0xFFFE1070)) +#define PERSEUS2_IO_CONF1 ((unsigned int)(0xFFFE1074)) +#define PERSEUS2_IO_CONF2 ((unsigned int)(0xFFFE1078)) +#define PERSEUS2_IO_CONF3 ((unsigned int)(0xFFFE107C)) +#define PERSEUS2_IO_CONF4 ((unsigned int)(0xFFFE1080)) +#define PERSEUS2_IO_CONF5 ((unsigned int)(0xFFFE1084)) +#define PERSEUS2_IO_CONF6 ((unsigned int)(0xFFFE1088)) +#define PERSEUS2_IO_CONF7 ((unsigned int)(0xFFFE108C)) +#define PERSEUS2_IO_CONF8 ((unsigned int)(0xFFFE1090)) +#define PERSEUS2_IO_CONF9 ((unsigned int)(0xFFFE1094)) +#define PERSEUS2_IO_CONF10 ((unsigned int)(0xFFFE1098)) +#define PERSEUS2_IO_CONF11 ((unsigned int)(0xFFFE109C)) +#define PERSEUS2_IO_CONF12 ((unsigned int)(0xFFFE10A0)) +#define PERSEUS2_IO_CONF13 ((unsigned int)(0xFFFE10A4)) +#define PERSEUS_PCC_CONF_REG ((unsigned int)(0xFFFE10B4)) +#define BIST_STATUS_INTERNAL ((unsigned int)(0xFFFE10B8)) +#define BIST_CONTROL ((unsigned int)(0xFFFE10C0)) +#define BOOT_ROM_REG ((unsigned int)(0xFFFE10C4)) +#define PRODUCTION_ID_REG ((unsigned int)(0xFFFE10C8)) +#define BIST_SECROM_SIGNATURE1_INTERNAL ((unsigned int)(0xFFFE10D0)) +#define BIST_SECROM_SIGNATURE2_INTERNAL ((unsigned int)(0xFFFE10D4)) +#define BIST_CONTROL_2 ((unsigned int)(0xFFFE10D8)) +#define DEBUG1 ((unsigned int)(0xFFFE10E0)) +#define DEBUG2 ((unsigned int)(0xFFFE10E4)) +#define DEBUG_DMA_IRQ ((unsigned int)(0xFFFE10E8)) + + + + +/*************************************************************************** + * OMAP730 EMIFS Registers (TRM 2.5.7) + **************************************************************************/ + +#define TCMIF_BASE 0xFFFECC00 + +#define EMIFS_LRUREG (TCMIF_BASE + 0x04) +#define EMIFS_CONFIG (TCMIF_BASE + 0x0C) +#define FLASH_CFG_0 (TCMIF_BASE + 0x10) +#define FLASH_CFG_1 (TCMIF_BASE + 0x14) +#define FLASH_CFG_2 (TCMIF_BASE + 0x18) +#define FLASH_CFG_3 (TCMIF_BASE + 0x1C) +#define FL_CFG_DYN_WAIT (TCMIF_BASE + 0x40) +#define EMIFS_TIMEOUT1_REG (TCMIF_BASE + 0x28) +#define EMIFS_TIMEOUT2_REG (TCMIF_BASE + 0x2C) +#define EMIFS_TIMEOUT3_REG (TCMIF_BASE + 0x30) +#define EMIFS_ABORT_ADDR (TCMIF_BASE + 0x44) +#define EMIFS_ABORT_TYPE (TCMIF_BASE + 0x48) +#define EMIFS_ABORT_TOUT (TCMIF_BASE + 0x4C) +#define FLASH_ACFG_0_1 (TCMIF_BASE + 0x50) +#define FLASH_ACFG_1_1 (TCMIF_BASE + 0x54) +#define FLASH_ACFG_2_1 (TCMIF_BASE + 0x58) +#define FLASH_ACFG_3_1 (TCMIF_BASE + 0x5C) + + + +/*************************************************************************** + * OMAP730 Interrupt handlers + **************************************************************************/ + +#define OMAP_IH1_BASE 0xFFFECB00 /* MPU Level 1 IRQ handler */ +#define OMAP_IH2_BASE 0xfffe0000 + + + +/*************************************************************************** + * OMAP730 Timers + * + * There are three general purpose OS timers in the 730 that can be + * configured in autoreload or one-shot modes. + **************************************************************************/ + +#define OMAP730_32kHz_TIMER_BASE 0xFFFB9000 + +/* 32k Timer Registers */ +#define TIMER32k_CR 0x08 +#define TIMER32k_TVR 0x00 +#define TIMER32k_TCR 0x04 + +/* 32k Timer Control Register definition */ +#define TIMER32k_TSS (1<<0) +#define TIMER32k_TRB (1<<1) +#define TIMER32k_INT (1<<2) +#define TIMER32k_ARL (1<<3) + +/* MPU Timer base addresses */ +#define OMAP730_MPUTIMER_BASE 0xfffec500 +#define OMAP730_MPUTIMER_OFF 0x00000100 + +#define OMAP730_TIMER1_BASE 0xFFFEC500 +#define OMAP730_TIMER2_BASE 0xFFFEC600 +#define OMAP730_TIMER3_BASE 0xFFFEC700 + +/* MPU Timer Register offsets */ +#define CNTL_TIMER 0x00 /* MPU_CNTL_TIMER */ +#define LOAD_TIM 0x04 /* MPU_LOAD_TIMER */ +#define READ_TIM 0x08 /* MPU_READ_TIMER */ + +/* MPU_CNTL_TIMER register bits */ +#define MPUTIM_FREE (1<<6) +#define MPUTIM_CLOCK_ENABLE (1<<5) +#define MPUTIM_PTV_MASK (0x7<<PTV_BIT) +#define MPUTIM_PTV_BIT 2 +#define MPUTIM_AR (1<<1) +#define MPUTIM_ST (1<<0) + + + +/*************************************************************************** + * OMAP730 GPIO + * + * The GPIO control is split over 6 register bases in the OMAP730 to allow + * access to all the (6 x 32) GPIO pins! + **************************************************************************/ + +#define OMAP730_GPIO_BASE_1 0xFFFBC000 +#define OMAP730_GPIO_BASE_2 0xFFFBC800 +#define OMAP730_GPIO_BASE_3 0xFFFBD000 +#define OMAP730_GPIO_BASE_4 0xFFFBD800 +#define OMAP730_GPIO_BASE_5 0xFFFBE000 +#define OMAP730_GPIO_BASE_6 0xFFFBE800 + +#define GPIO_DATA_INPUT 0x00 +#define GPIO_DATA_OUTPUT 0x04 +#define GPIO_DIRECTION_CONTROL 0x08 +#define GPIO_INTERRUPT_CONTROL 0x0C +#define GPIO_INTERRUPT_MASK 0x10 +#define GPIO_INTERRUPT_STATUS 0x14 + +#define GPIO_DATA_INPUT_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_INPUT)) +#define GPIO_DATA_OUTPUT_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_OUTPUT)) +#define GPIO_DIRECTION_CONTROL_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DIRECTION_CONTROL)) +#define GPIO_INTERRUPT_CONTROL_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_CONTROL)) +#define GPIO_INTERRUPT_MASK_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_MASK)) +#define GPIO_INTERRUPT_STATUS_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_STATUS)) + +#define GPIO_DATA_INPUT_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_INPUT)) +#define GPIO_DATA_OUTPUT_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_OUTPUT)) +#define GPIO_DIRECTION_CONTROL_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DIRECTION_CONTROL)) +#define GPIO_INTERRUPT_CONTROL_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_CONTROL)) +#define GPIO_INTERRUPT_MASK_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_MASK)) +#define GPIO_INTERRUPT_STATUS_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_STATUS)) + +#define GPIO_DATA_INPUT_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_INPUT)) +#define GPIO_DATA_OUTPUT_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT)) +#define GPIO_DIRECTION_CONTROL_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL)) +#define GPIO_INTERRUPT_CONTROL_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_CONTROL)) +#define GPIO_INTERRUPT_MASK_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_MASK)) +#define GPIO_INTERRUPT_STATUS_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_STATUS)) + +#define GPIO_DATA_INPUT_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_INPUT)) +#define GPIO_DATA_OUTPUT_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_OUTPUT)) +#define GPIO_DIRECTION_CONTROL_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DIRECTION_CONTROL)) +#define GPIO_INTERRUPT_CONTROL_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_CONTROL)) +#define GPIO_INTERRUPT_MASK_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_MASK)) +#define GPIO_INTERRUPT_STATUS_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_STATUS)) + +#define GPIO_DATA_INPUT_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_INPUT)) +#define GPIO_DATA_OUTPUT_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT)) +#define GPIO_DIRECTION_CONTROL_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL)) +#define GPIO_INTERRUPT_CONTROL_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_CONTROL)) +#define GPIO_INTERRUPT_MASK_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_MASK)) +#define GPIO_INTERRUPT_STATUS_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_STATUS)) + +#define GPIO_DATA_INPUT_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_INPUT)) +#define GPIO_DATA_OUTPUT_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_OUTPUT)) +#define GPIO_DIRECTION_CONTROL_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DIRECTION_CONTROL)) +#define GPIO_INTERRUPT_CONTROL_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_CONTROL)) +#define GPIO_INTERRUPT_MASK_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_MASK)) +#define GPIO_INTERRUPT_STATUS_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_STATUS)) + + + + +/*************************************************************************** + * OMAP730 Watchdog timers + **************************************************************************/ + +#define WDTIM_BASE 0xFFFEC800 +#define WDTIM_CONTROL (WDTIM_BASE + 0x00) /* MPU_CNTL_TIMER */ +#define WDTIM_LOAD (WDTIM_BASE + 0x04) /* MPU_LOAD_TIMER */ +#define WDTIM_READ (WDTIM_BASE + 0x04) /* MPU_READ_TIMER */ +#define WDTIM_MODE (WDTIM_BASE + 0x08) /* MPU_TIMER_MODE */ + + + + +/*************************************************************************** + * OMAP730 Interrupt Registers + **************************************************************************/ + +/* Interrupt Register offsets */ + +#define IRQ_ITR 0x00 +#define IRQ_MIR 0x04 +#define IRQ_SIR_IRQ 0x10 +#define IRQ_SIR_FIQ 0x14 +#define IRQ_CONTROL_REG 0x18 +#define IRQ_ILR0 0x1C /* ILRx == ILR0 + (0x4 * x) */ +#define IRQ_SIR 0x9C /* a.k.a.IRQ_ISR */ +#define IRQ_GMIR 0xA0 + +#define REG_IHL1_MIR (OMAP_IH1_BASE + IRQ_MIR) +#define REG_IHL2_MIR (OMAP_IH2_BASE + IRQ_MIR) + + +/*************************************************************************** + * OMAP730 Intersystem Communication Register (TRM 4.5) + **************************************************************************/ + + +#define ICR_BASE 0xFFFBB800 + +#define M_ICR (ICR_BASE + 0x00) +#define G_ICR (ICR_BASE + 0x02) +#define M_CTL (ICR_BASE + 0x04) +#define G_CTL (ICR_BASE + 0x06) +#define PM_BA (ICR_BASE + 0x0A) +#define DM_BA (ICR_BASE + 0x0C) +#define RM_BA (ICR_BASE + 0x0E) +#define SSPI_TAS (ICR_BASE + 0x12) + + + +#endif /* ! __INCLUDED_OMAP730_H */ diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h new file mode 100644 index 0000000..fe200c1 --- /dev/null +++ b/include/configs/omap730p2.h @@ -0,0 +1,220 @@ +/* + * (C) Copyright 2003-2004 + * MPC Data Limited (http://www.mpc-data.co.uk) + * Dave Peverley <dpeverley at mpc-data.co.uk> + * + * Configuation settings for the TI OMAP Perseus 2 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ + +#define CONFIG_INIT_CRITICAL /* undef for developing */ + + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP730 1 /* which is in a 730 */ +#define CONFIG_P2_OMAP730 1 /* a Perseus 2 Board */ + + +/* + * Input clock of PLL + * The OMAP730 Perseus 2 has 13MHz input clock + */ + +#define CONFIG_SYS_CLK_FREQ 13000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 + + +/* + * Size of malloc() pool + */ + +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + + +/* + * Hardware drivers + */ + +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE 0x04000300 +#define CONFIG_LAN91C96_EXT_PHY + + +/* + * NS16550 Configuration + */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (1) +#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart + * on perseus */ + +/* + * select serial console configuration + */ + +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP730 Perseus 2 */ + + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* + * This must be included AFTER the definition of CONFIG_COMMANDS (if any) + */ + +#include <cmd_confdefs.h> +#include <configs/omap730.h> +#include <configs/h2_p2_dbg_board.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw ip=bootp" + +#define CONFIG_LOADADDR 0x10000000 + +#define CONFIG_ETHADDR +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.0.23 +#define CONFIG_SERVERIP 192.150.0.100 +#define CONFIG_BOOTFILE "uImage" /* File to load */ + +#if defined (CONFIG_COMMANDS) && defined (CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* Speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* Which serial port to use */ +#endif + + +/* + * Miscellaneous configurable options + */ + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "OMAP730 P2 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x10000000 /* default load address */ + + +/* The OMAP730 has 3 general purpose MPU timers, they can be driven by + * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a + * local divisor. + */ + +#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ + +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#if defined(CONFIG_CS0_BOOT) +#define PHYS_FLASH_1 0x0C000000 +#elif defined(CONFIG_CS3_BOOT) +#define PHYS_FLASH_1 0x00000000 +#else +#error Unknown Boot Chip-Select number +#endif + +#define CFG_FLASH_BASE PHYS_FLASH_1 + + + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ +/* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x20000 /* environment starts here */ + + + +#endif /* ! __CONFIG_H */ |