diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/MPC8349EMDS.h | 70 | ||||
| -rw-r--r-- | include/configs/MPC8349ITX.h | 804 | ||||
| -rw-r--r-- | include/configs/MPC8360EMDS.h | 635 | ||||
| -rw-r--r-- | include/configs/TQM834x.h | 28 |
4 files changed, 1517 insertions, 20 deletions
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 66f1646..5bed2d0 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -36,6 +36,7 @@ */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC834X 1 /* MPC834X family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ @@ -59,9 +60,20 @@ #endif #endif +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ + | CFG_SCCR_TSEC1CM \ + | CFG_SCCR_TSEC2CM \ + | CFG_SCCR_ENCCM \ + | CFG_SCCR_USBCM ) + #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ -#define CFG_IMMRBAR 0xE0000000 +#define CFG_IMMR 0xE0000000 #undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00000000 /* memtest region */ @@ -299,8 +311,8 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) /* Use the HUSH parser */ #define CFG_HUSH_PARSER @@ -308,20 +320,35 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" + /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 /* TSEC */ #define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET) +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) #define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET) +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) /* USB */ #define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ @@ -615,8 +642,8 @@ #endif /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) @@ -666,11 +693,11 @@ #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif -#define CONFIG_IPADDR 192.168.205.5 +#define CONFIG_IPADDR 192.168.1.253 #define CONFIG_HOSTNAME mpc8349emds -#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx -#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -703,14 +730,31 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/mpc8349emds/uImage\0" \ "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ "update=protect off fe000000 fe03ffff; " \ "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ "upd=run load;run update\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emds.dtb\0" \ "" +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + #define CONFIG_BOOTCOMMAND "run flash_self" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h new file mode 100644 index 0000000..8dc9635 --- /dev/null +++ b/include/configs/MPC8349ITX.h @@ -0,0 +1,804 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + MPC8349E-mITX board configuration file + + Memory map: + + 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) + 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) + 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) + 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) + 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) + 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) + 0xF000_0000-0xF000_FFFF Compact Flash + 0xF001_0000-0xF001_FFFF Local bus expansion slot + 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385 + 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB) + 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB) + + I2C address list: + Align. Board + Bus Addr Part No. Description Length Location + ---------------------------------------------------------------- + I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 + + I2C1 0x20 PCF8574 I2C Expander 0 U8 + I2C1 0x21 PCF8574 I2C Expander 0 U10 + I2C1 0x38 PCF8574A I2C Expander 0 U8 + I2C1 0x39 PCF8574A I2C Expander 0 U10 + I2C1 0x51 (DDR) DDR EEPROM 1 U1 + I2C1 0x68 DS1339 RTC 1 U68 + + Note that a given board has *either* a pair of 8574s or a pair of 8574As. +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ +#define CONFIG_MPC8349 /* MPC8349 specific */ + +#define CONFIG_PCI + +#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ +#define CONFIG_RTC_DS1337 + +/* I2C */ +#define CONFIG_HARD_I2C + +#ifdef CONFIG_HARD_I2C + +#define CONFIG_MISC_INIT_F +#define CONFIG_MISC_INIT_R + +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 +#define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */ + +#define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ +#define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ +#define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ +#define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ +#define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ +#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ + +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* Don't probe these addresses: */ +#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ + {1, CFG_I2C_8574_ADDR2}, \ + {1, CFG_I2C_8574A_ADDR1}, \ + {1, CFG_I2C_8574A_ADDR2}} +/* Bit definitions for the 8574[A] I2C expander */ +#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ +#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ +#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ +#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ +#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ + +#undef CONFIG_SOFT_I2C + +#endif + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#define PCI_66M +#ifdef PCI_66M +#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ +#else +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#ifdef PCI_66M +#define CONFIG_SYS_CLK_FREQ 66666666 +#else +#define CONFIG_SYS_CLK_FREQ 33333333 +#endif +#endif + +#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00003000 /* memtest region */ +#define CFG_MEMTEST_END 0x07100000 /* only has 128M */ + +/* + * DDR Setup + */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#undef CONFIG_DDR_2T_TIMING +#define CFG_83XX_DDR_USES_CS0 + +#ifndef CONFIG_SPD_EEPROM +/* + * Manually set up DDR parameters + */ + #define CFG_DDR_SIZE 256 /* Mb */ + #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) + + #define CFG_DDR_TIMING_1 0x26242321 + #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ +#endif + +/* FLASH on the Local Bus */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 16 /* FLASH size in MB */ +#define CFG_FLASH_EMPTY_INFO + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16Mb window bytes */ + +/* VSC7385 on the Local Bus */ +#define CFG_VSC7385_BASE 0xF8000000 /* start of VSC7385 */ + +#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) +#define CFG_OR1_PRELIM (0xFFFE0000 /* 128KB */ | \ + OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE /* Access window base at VSC7385 base */ +#define CFG_LBLAWAR1_PRELIM 0x80000010 /* Access window size 128K */ + +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_LED_BASE 0xF9000000 /* start of LED and Board ID */ +#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) +#define CFG_OR2_PRELIM (0xFFE00000 /* 2MB */ | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \ + OR_GPCM_SCY_9 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#ifdef CONFIG_COMPACT_FLASH + +#define CFG_CF_BASE 0xF0000000 + +#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) +#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) + +#define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */ +#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */ + +#undef CONFIG_IDE_RESET +#undef CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 + +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_BASE_ADDR CFG_CF_BASE +#define CFG_ATA_DATA_OFFSET 0x0000 +#define CFG_ATA_REG_OFFSET 0 +#define CFG_ATA_ALT_OFFSET 0x0200 +#define CFG_ATA_STRIDE 2 + +#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ + +#endif + +#define CONFIG_DOS_PARTITION + +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +#undef CFG_LB_SDRAM /* if board has SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 + */ + +#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM 0xF0000000 +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ + +#define CFG_BR2_PRELIM (CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V) +#define CFG_OR2_PRELIM (0xFC000000 /* 64 MB */ | \ + OR_SDRAM_XAM | \ + ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \ + ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \ + OR_SDRAM_EAD) + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) +#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) +#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) +#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) +#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) +#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) +#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) +#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) +#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) +#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) + +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ + | CFG_LBC_LSDMR_BSMA1516 \ + | CFG_LBC_LSDMR_RFCR8 \ + | CFG_LBC_LSDMR_PRETOACT6 \ + | CFG_LBC_LSDMR_ACTTORW3 \ + | CFG_LBC_LSDMR_BL8 \ + | CFG_LBC_LSDMR_WRC3 \ + | CFG_LBC_LSDMR_CL3 \ + ) + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" + +#ifdef CONFIG_PCI + +#define CONFIG_MPC83XX_PCI2 + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE) +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE) +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE) +#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ +#endif + +#define _IO_BASE 0x00000000 /* points to PCI I/O space */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#ifdef CONFIG_RTL8139 +/* This macro is used by RTL8139 but not defined in PPC architecture */ +#define KSEG1ADDR(x) (x) +#endif + +#ifndef CONFIG_PCI_PNP + #define PCI_ENET0_IOADDR 0x00000000 + #define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE + #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#endif + +/* TSEC */ + +#ifdef CONFIG_TSEC_ENET + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif + +#define CONFIG_MII +#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ + +#define CONFIG_MPC83XX_TSEC1 + +#ifdef CONFIG_MPC83XX_TSEC1 +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CFG_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ +#define TSEC1_PHYIDX 0 +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CFG_TSEC2_OFFSET 0x25000 +#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ +#define TSEC2_PHY_ADDR 4 +#define TSEC2_PHYIDX 0 +#endif + +#define CONFIG_ETHPRIME "Freescale TSEC" + +#endif + + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* CONFIG_COMMANDS */ + +#ifdef CONFIG_COMPACT_FLASH +#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT) +#else +#define CONFIG_COMMANDS_CF 0 +#endif + +#ifdef CONFIG_PCI +#define CONFIG_COMMANDS_PCI CFG_CMD_PCI +#else +#define CONFIG_COMMANDS_PCI 0 +#endif + +#ifdef CONFIG_HARD_I2C +#define CONFIG_COMMANDS_I2C CFG_CMD_I2C +#else +#define CONFIG_COMMANDS_I2C 0 +#endif + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CONFIG_COMMANDS_CF | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CONFIG_COMMANDS_I2C | \ + CONFIG_COMMANDS_PCI | \ + CFG_CMD_SDRAM | \ + CFG_CMD_DATE | \ + CFG_CMD_CACHE | \ + CFG_CMD_IRQ) +#include <cmd_confdefs.h> + +/* Watchdog */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#ifdef CONFIG_WATCHDOG +#define CFG_WATCHDOG_VALUE 0xFFFFFFC3 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ +#endif + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CORE_TO_CSB_2X1) + +#ifdef PCI_64BIT +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_64_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_32_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#endif + +/* System performance */ +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ +#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ +#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ +#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ +#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */ + +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ +#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1) + +#define CFG_HID0_INIT 0x000000000 + +#define CFG_HID0_FINAL CFG_HID0_INIT + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT1L 0 +#define CFG_IBAT1U 0 +#define CFG_IBAT2L 0 +#define CFG_IBAT2U 0 +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L 0 +#define CFG_IBAT3U 0 +#define CFG_IBAT4L 0 +#define CFG_IBAT4U 0 +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L 0 +#define CFG_IBAT7U 0 + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_MPC83XX_TSEC1 +#define CONFIG_ETHADDR 00:E0:0C:00:8C:01 +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 +#endif + +#if 1 +#define CONFIG_IPADDR 10.82.19.159 +#define CONFIG_SERVERIP 10.82.48.106 +#define CONFIG_GATEWAYIP 10.82.19.254 +#define CONFIG_NETMASK 255.255.252.0 +#define CONFIG_NETDEV eth0 + +#define CONFIG_HOSTNAME mpc8349emitx +#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs +#define CONFIG_BOOTFILE timur/uImage + +#define CONFIG_UBOOTPATH timur/u-boot.bin +#else +#define CONFIG_IPADDR 192.168.1.253 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.252.0 +#define CONFIG_NETDEV eth0 + +#define CONFIG_HOSTNAME mpc8349emitx +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage + +#define CONFIG_UBOOTPATH u-boot.bin +#endif + +#define CONFIG_UBOOTSTART fe700000 +#define CONFIG_UBOOTEND fe77ffff + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTDELAY 6 +#else +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#endif + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_BOOTARGS \ + "root=/dev/nfs rw" \ + " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ + " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ + MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ + MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ + " console=ttyS0," MK_STR(CONFIG_BAUDRATE) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ + "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ + "cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \ + "cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \ + "tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ + "protect off FEF00000 FEF7FFFF; " \ + "erase FEF00000 FEF7FFFF; " \ + "cp.b $loadaddr FEF00000 $filesize; " \ + "protect on FEF00000 FEF7FFFF; " \ + "cmp.b $loadaddr FEF00000 $filesize\0" \ + "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \ + "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ + "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emitx.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + + +#undef MK_STR +#undef XMK_STR + +#endif diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h new file mode 100644 index 0000000..2ff5f48 --- /dev/null +++ b/include/configs/MPC8360EMDS.h @@ -0,0 +1,635 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu <daveliu@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ +#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ + +/* + * System Clock Setup + */ +#ifdef CONFIG_PCISLAVE +#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ +#else +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 66000000 +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CE_PLL_VCO_DIV_4 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X6 |\ + HRCWL_CORE_TO_CSB_2X1) + +#ifdef CONFIG_PCISLAVE +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_AGENT |\ + HRCWH_PCI1_ARBITER_DISABLE |\ + HRCWH_PCICKDRV_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCICKDRV_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#endif + +/* + * System IO Config + */ +#define CFG_SICRH 0x00000000 +#define CFG_SICRL 0x40000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +#define CFG_83XX_DDR_USES_CS0 + +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ + +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */ +#else +/* + * Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) +#define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */ +#define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */ +#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */ +#define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ +#define CFG_DDR_INTERVAL 0x045b0100 /* page mode */ +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 + +/* + * The reserved memory + */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * BCSR on the Local Bus + */ +#define CFG_BCSR 0xF8000000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ + +#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ + +/* + * SDRAM on the Local Bus + */ +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LB_SDRAM /* if board has SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * CS4 on Local Bus, to PIB + */ +#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * CS5 on Local Bus, to PIB + */ +#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8360@0" +#define OF_SOC "soc8360@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_MMIO_BASE 0x90000000 +#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE +#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_IO_BASE 0xE0300000 +#define CFG_PCI_IO_PHYS 0xE0300000 +#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ + +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE +#define CFG_PCI_SLV_MEM_BUS 0x00000000 +#define CFG_PCI_SLV_MEM_SIZE 0x80000000 + + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" +#define CONFIG_PHY_MODE_NEED_CHANGE + +#define CONFIG_UEC_ETH1 /* GETH1 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ +#define CFG_UEC1_RX_CLK QE_CLK_NONE +#define CFG_UEC1_TX_CLK QE_CLK9 +#define CFG_UEC1_ETH_TYPE GIGA_ETH +#define CFG_UEC1_PHY_ADDR 0 +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#endif + +#define CONFIG_UEC_ETH2 /* GETH2 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK_NONE +#define CFG_UEC2_TX_CLK QE_CLK4 +#define CFG_UEC2_ETH_TYPE GIGA_ETH +#define CFG_UEC2_PHY_ADDR 1 +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#endif + +/* + * Environment + */ + +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C ) +#endif +#endif + +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* BCSR: cache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +/* Local bus SDRAM: cacheable */ +#define CFG_IBAT4L (CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT4U (CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#else +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_UEC_ETH) +#define CONFIG_ETHADDR 00:04:9f:ef:01:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=ramfs.83xx\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emds.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 4bbee97..728083b 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -37,10 +37,11 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC834X 1 /* MPC834X specific */ +#define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_TQM834X 1 /* TQM834X board specific */ /* IMMR Base Addres Register, use Freescale default: 0xff400000 */ -#define CFG_IMMRBAR 0xff400000 +#define CFG_IMMR 0xff400000 /* System clock. Primary input clock when in PCI host mode */ #define CONFIG_83XX_CLKIN 66666000 /* 66,666 MHz */ @@ -56,6 +57,17 @@ */ #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ + | CFG_SCCR_TSEC1CM \ + | CFG_SCCR_TSEC2CM \ + | CFG_SCCR_ENCCM \ + | CFG_SCCR_USBCM ) + /* board pre init: do not call, nothing to do */ #undef CONFIG_BOARD_EARLY_INIT_F @@ -83,6 +95,7 @@ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_BASE 0x80000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* FLASH size in MB */ /* buffered writes in the AMD chip set is not supported yet */ #undef CFG_FLASH_USE_BUFFER_WRITE @@ -197,14 +210,15 @@ extern int tqm834x_num_flash_banks; #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* * I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C #define CFG_I2C_SPEED 400000 /* I2C speed: 400KHz */ #define CFG_I2C_SLAVE 0x7F /* slave address */ #define CFG_I2C_OFFSET 0x3000 @@ -235,9 +249,9 @@ extern int tqm834x_num_flash_banks; #define CONFIG_MII #define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMRBAR + CFG_TSEC1_OFFSET) +#define CFG_TSEC1 (CFG_IMMR + CFG_TSEC1_OFFSET) #define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMRBAR + CFG_TSEC2_OFFSET) +#define CFG_TSEC2 (CFG_IMMR + CFG_TSEC2_OFFSET) #if defined(CONFIG_TSEC_ENET) @@ -460,8 +474,8 @@ extern int tqm834x_num_flash_banks; #endif /* IMMRBAR */ -#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT6U (CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP) +#define CFG_IBAT6L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP) /* FLASH */ #define CFG_IBAT7L (CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |