summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/ATUM8548.h5
-rw-r--r--include/configs/MPC8536DS.h14
-rw-r--r--include/configs/MPC8540ADS.h1
-rw-r--r--include/configs/MPC8541CDS.h1
-rw-r--r--include/configs/MPC8544DS.h6
-rw-r--r--include/configs/MPC8548CDS.h6
-rw-r--r--include/configs/MPC8555CDS.h1
-rw-r--r--include/configs/MPC8560ADS.h1
-rw-r--r--include/configs/MPC8568MDS.h6
-rw-r--r--include/configs/MPC8572DS.h72
-rw-r--r--include/configs/MPC8610HPCD.h15
-rw-r--r--include/configs/MPC8641HPCN.h17
-rw-r--r--include/configs/TQM85xx.h5
-rw-r--r--include/configs/fx12mm.h72
-rw-r--r--include/configs/kilauea.h7
-rw-r--r--include/configs/sbc8548.h5
-rw-r--r--include/configs/sbc8641d.h5
-rw-r--r--include/configs/xilinx-ppc405-generic.h58
-rw-r--r--include/configs/xilinx-ppc405.h126
19 files changed, 329 insertions, 94 deletions
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index 2450adb..1b74526 100644
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -287,11 +287,6 @@
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 38be10d..c4389cc 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -41,6 +41,7 @@
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
@@ -134,14 +135,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_SYS_DDR_ERR_DIS 0x00000000
#define CONFIG_SYS_DDR_SBE 0x00010000
-/* FIXME: Not used in fixed_sdram function */
-#define CONFIG_SYS_DDR_MODE 0x00000022
-#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */
-
/* Make sure required options are set */
#ifndef CONFIG_SPD_EEPROM
#error ("CONFIG_SPD_EEPROM is required")
@@ -314,11 +307,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 5a14969..79a52d9 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -46,6 +46,7 @@
#endif
#define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index eede26a..7ada8a2 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -38,6 +38,7 @@
#define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */
#define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 0987448..cdbbea6 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -41,6 +41,7 @@
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
@@ -275,11 +276,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
/* controller 2, Slot 1, tgtid 1, Base address 9000 */
#define CONFIG_SYS_PCIE2_MEM_BASE 0x80000000
#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 892c52e..083afba 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -43,6 +43,7 @@
#undef CONFIG_PCI2
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
@@ -419,11 +420,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
#endif /* CONFIG_PCI */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 41870f1..f9419cc 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -38,6 +38,7 @@
#define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */
#define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 0d3a500..f67d489 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -43,6 +43,7 @@
#define CONFIG_MPC8560 1
#define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index ba2f152..ab3e6d6 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -38,6 +38,7 @@
#define CONFIG_PCIE1 1 /* PCIE controller */
#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_QE /* Enable QE */
#define CONFIG_ENV_OVERWRITE
@@ -388,11 +389,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 5688589..f98e7fb 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -42,6 +42,7 @@
#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
@@ -135,16 +136,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_SYS_DDR_SBE 0x00010000
/*
- * FIXME: Not used in fixed_sdram function
- */
-#define CONFIG_SYS_DDR_MODE 0x00000022
-#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */
-
-/*
* Make sure required options are set
*/
#ifndef CONFIG_SPD_EEPROM
@@ -167,6 +158,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
* Localbus non-cacheable
* 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable
* 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable
+ * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable
* 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0
* 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
@@ -269,6 +261,59 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_NAND_BASE 0xffa00000
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\
+ CONFIG_SYS_NAND_BASE + 0x40000, \
+ CONFIG_SYS_NAND_BASE + 0x80000,\
+ CONFIG_SYS_NAND_BASE + 0xC0000}
+#define CONFIG_SYS_MAX_NAND_DEVICE 4
+#define NAND_MAX_CHIPS 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND 1
+#define CONFIG_NAND_FSL_ELBC 1
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+/* NAND flash config */
+#define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
+ | OR_FCM_PGS /* Large Page*/ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR)
+
+#define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+
+#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+
+#define CONFIG_SYS_BR6_PRELIM ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+
+
+
/* Serial Port - controlled on board with jumper J8
* open - index 2
* shorted - index 1
@@ -335,11 +380,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
/* controller 3, direct to uli, tgtid 3, Base address 8000 */
#define CONFIG_SYS_PCIE3_MEM_BASE 0x80000000
#define CONFIG_SYS_PCIE3_MEM_PHYS CONFIG_SYS_PCIE3_MEM_BASE
@@ -469,7 +509,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
#define CONFIG_ENV_ADDR 0xfff80000
#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x70000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
#endif
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 678e1e1..67b2764 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -41,6 +41,7 @@
#define CONFIG_PCIE1 1 /* PCIe 1 connected to ULI bridge */
#define CONFIG_PCIE2 1 /* PCIe 2 connected to slot */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
@@ -125,15 +126,6 @@
#define CONFIG_SYS_DDR_ERR_DIS 0x00000000
#define CONFIG_SYS_DDR_SBE 0x000f0000
-/*
- * FIXME: Not used in fixed_sdram function
- */
-#define CONFIG_SYS_DDR_MODE 0x00000022
-#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */
#endif
@@ -278,11 +270,6 @@
#define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
/* For RTL8139 */
#define KSEG1ADDR(x) ({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
#define _IO_BASE 0x00000000
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index e5710c0..542877b 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -49,6 +49,7 @@
#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */
#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL law init code */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
@@ -138,17 +139,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_DDR_CONTROL 0xe3008000 /* Type = DDR2 */
#define CONFIG_SYS_DDR_CONTROL2 0x04400000
-/*
- * FIXME: Not used in fixed_sdram function
- */
-#define CONFIG_SYS_DDR_MODE 0x00000022
-#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */
-#define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */
-
-
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_ID_EEPROM
@@ -304,11 +294,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
/* For RTL8139 */
#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
#define _IO_BASE 0x00000000
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index b05f43d..2d4048a 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -403,11 +403,6 @@
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
#ifdef CONFIG_PCIE1
/*
* General PCI express
diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h
new file mode 100644
index 0000000..d45e7a0
--- /dev/null
+++ b/include/configs/fx12mm.h
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2008
+ *
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com
+ *
+ * Georg Schardt <schardt@team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*
+ Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec,
+ see http://www.em.avnet.com
+*/
+
+#ifndef __CONFIG_FX12_H
+#define __CONFIG_FX12_H
+
+#include "../board/avnet/fx12mm/xparameters.h"
+
+/* cmd config */
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_NET
+
+/* sdram */
+#define CONFIG_SYS_SDRAM_SIZE_MB 64
+
+/* environment */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_SYS_ENV_OFFSET 0xA0000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET)
+#define CONFIG_ENV_OVERWRITE 1
+
+/*Misc*/
+#define CONFIG_SYS_PROMPT "FX12MM:/# " /* Monitor Command Prompt */
+#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_2MX16_MEM0_BASEADDR
+#define CONFIG_SYS_FLASH_SIZE (4*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT 71
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define MTDIDS_DEFAULT "nor0=fx12mm-flash"
+#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)"
+
+
+#include "configs/xilinx-ppc405.h"
+
+#endif /* __CONFIG_H */
+
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 237a9c5..b943f31 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -235,9 +235,16 @@
*
* DDR Autocalibration Method_B is the default.
*/
+#if 0
+/*
+ * Needs FIX!!!
+ * Disable autocalibration for now, because of the unresolved problem
+ * with kilauea board using 200MHz PLB/DDR2 frequency
+ */
#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
#undef CONFIG_PPC4xx_DDR_METHOD_A
+#endif
#define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE)
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 54f3e66..aefd30a 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -387,11 +387,6 @@
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
#endif /* CONFIG_PCI */
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 14d1c88..09a9901 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -308,11 +308,6 @@
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
#define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000
#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h
new file mode 100644
index 0000000..5036c62
--- /dev/null
+++ b/include/configs/xilinx-ppc405-generic.h
@@ -0,0 +1,58 @@
+/*
+ *
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ *
+ * (C) Copyright 2008
+ * Georg Schardt <schardt@team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_GEN_H
+#define __CONFIG_GEN_H
+
+#include "../board/xilinx/ppc405-generic/xparameters.h"
+
+/* sdram */
+#define CONFIG_SYS_SDRAM_SIZE_MB 256
+
+/* environment */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_SYS_ENV_OFFSET 0x3F0000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET)
+#define CONFIG_ENV_OVERWRITE 1
+
+/*Misc*/
+#define CONFIG_SYS_PROMPT "xlx-ppc405:/# " /* Monitor Command Prompt */
+#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
+#define CONFIG_SYS_FLASH_SIZE (32*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT 71
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define MTDIDS_DEFAULT "nor0=ppc405-flash"
+#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)"
+
+#include <configs/xilinx-ppc405.h>
+#endif /* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h
new file mode 100644
index 0000000..7458470
--- /dev/null
+++ b/include/configs/xilinx-ppc405.h
@@ -0,0 +1,126 @@
+/*
+ *
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ *
+ * (C) Copyright 2008
+ * Georg Schardt <schardt@team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* cpu parameter */
+#define CONFIG_4xx 1
+#define CONFIG_405 1
+#define CONFIG_XILINX_405 1
+
+/* memory map */
+#define CONFIG_SYS_SDRAM_BASE 0x0
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (192 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* u-boot commands configuration */
+#include <config_cmd_default.h>
+
+/*Misc*/
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING /* add command line history */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_LOOPW /* enable loopw command */
+#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE /* include version env variable */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
+#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+ /* Initial Memory map for Linux */
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_CACHELINE_SHIFT 2
+
+/* stack */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_FLASH_CF 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_EMPTY_INFO 1
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_PROTECTION
+
+/* serial communication */
+#ifdef XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_XILINX_UARTLITE
+#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE
+#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+#else
+#ifdef XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 4
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 }
+#endif
+#endif
+
+/* cmd config */
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_IMLS
+
+#endif
generated by cgit v1.1 at 2024-12-27 15:14:31 +0000