diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/innokom.h | 1 | ||||
| -rw-r--r-- | include/configs/lpd7a400-10.h | 80 | ||||
| -rw-r--r-- | include/configs/lpd7a400.h | 114 |
3 files changed, 195 insertions, 0 deletions
diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 77439e6..f884519 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -140,6 +140,7 @@ #define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */ #undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ +#define CONFIG_SMC_AUTONEG_TIMEOUT 10 /* timeout 10 seconds */ #undef CONFIG_SHOW_ACTIVITY #define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h new file mode 100644 index 0000000..ecf2b5f --- /dev/null +++ b/include/configs/lpd7a400-10.h @@ -0,0 +1,80 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Logic LH7A400-10 card engine + */ + +#ifndef __LPD7A400_10_H +#define __LPD7A400_10_H + + +#define CONFIG_ARM920T 1 /* arm920t core */ +#define CONFIG_LH7A40X 1 /* Sharp LH7A400 SoC */ +#define CONFIG_LH7A400 1 + +/* The system clock PLL input frequency */ +#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */ + +/* ticks per second */ +#define CFG_HZ (508469) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ + +/*---------------------------------------------------------------------- + * Using SMC91C111 LAN chip + * + * Default IO base of chip is 0x300, Card Engine has this address lines + * (LAN chip) tied to Vcc, so we just care about the chip select + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE (0x70000000) +#undef CONFIG_SMC_USE_32_BIT +#define CONFIG_SMC_USE_IOFUNCS + +#endif /* __LPD7A400_10_H */ diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h new file mode 100644 index 0000000..3e91536 --- /dev/null +++ b/include/configs/lpd7a400.h @@ -0,0 +1,114 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __LPD7A400_H_ +#define __LPD7A400_H_ + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_USE_IRQ + +#define MACH_TYPE_LPD7A400 389 + +/* + * This board uses the logic LH7A400-10 card engine + */ +#include <configs/lpd7a400-10.h> + +#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * select serial console configuration + */ +#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_IPADDR 192.168.1.100 +#define CONFIG_NETMASK 255.255.1.0 +#define CONFIG_SERVERIP 192.168.1.1 + +#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +#ifndef USE_920T_MMU +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) +#endif + + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "LPD7A400> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */ +#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */ + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* size and location of u-boot in flash */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (256<<10) + +#define CFG_ENV_IS_IN_FLASH 1 + +/* Address and size of Primary Environment Sector */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000) +#define CFG_ENV_SIZE 0x40000 + +#endif /* __LPD7A400_H_ */ |