diff options
Diffstat (limited to 'include/configs')
508 files changed, 214 insertions, 4211 deletions
diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h index 2076ef0..7eb9e98 100644 --- a/include/configs/10m50_devboard.h +++ b/include/configs/10m50_devboard.h @@ -33,7 +33,6 @@ * NET options */ #define CONFIG_SYS_RX_ETH_BUFFER 0 -#define CONFIG_CMD_MII #define CONFIG_PHY_GIGE #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN #define CONFIG_PHY_MARVELL diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h index 802ac75..6489de3 100644 --- a/include/configs/3c120_devboard.h +++ b/include/configs/3c120_devboard.h @@ -36,7 +36,6 @@ * NET options */ #define CONFIG_SYS_RX_ETH_BUFFER 0 -#define CONFIG_CMD_MII #define CONFIG_PHY_GIGE #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN #define CONFIG_PHY_MARVELL diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 2d9be20..94c8253 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -498,11 +498,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ #endif - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ @@ -577,7 +572,6 @@ unsigned long get_board_ddr_clk(void); /* * eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -718,7 +712,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ - #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e @@ -741,14 +734,9 @@ unsigned long get_board_ddr_clk(void); * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -770,11 +758,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #endif #endif diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index e870ffe..b092933 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -52,7 +52,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif - /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ @@ -241,12 +240,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000 @@ -259,12 +252,8 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_CMD_I2C - - /* eSPI - Enhanced SPI */ #ifdef CONFIG_FSL_ESPI -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif @@ -324,14 +313,9 @@ extern unsigned long get_sdram_size(void); /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO /* @@ -373,7 +357,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 108e924..3a73379 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -93,7 +93,6 @@ #define CONFIG_CMD_PCI - /* * PCI Windows * Memory space is mapped 1-1, but I/O space must start from 0. @@ -223,7 +222,6 @@ combinations. this should be removed later #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 #endif - /* relocated CCSRBAR */ #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT @@ -425,12 +423,6 @@ combinations. this should be removed later #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER /* hush parser */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400800 /* I2C speed and slave address*/ @@ -468,7 +460,6 @@ combinations. this should be removed later */ /* eSPI - Enhanced SPI */ #ifdef CONFIG_FSL_ESPI -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif @@ -507,7 +498,6 @@ combinations. this should be removed later #define CONFIG_MMC #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC @@ -516,7 +506,6 @@ combinations. this should be removed later #define CONFIG_USB_EHCI /* USB */ #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE @@ -563,17 +552,11 @@ combinations. this should be removed later * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -601,7 +584,6 @@ combinations. this should be removed later #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - /* * For booting Linux, the board info and command line data * have to be in the first 64 MB of memory, since this is diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index a7a5e8e..4d14c8b 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -100,7 +100,6 @@ #define CONFIG_CMD_PCI - /* * PCI Windows * Memory space is mapped 1-1, but I/O space must start from 0. @@ -393,9 +392,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000 @@ -412,10 +408,7 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_CMD_I2C - /* eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 @@ -478,8 +471,6 @@ */ #define CONFIG_CMD_ERRATA #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO /* Hash command with SHA acceleration supported in hardware */ diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index c3a7714..b60da5e 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -48,17 +48,14 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C #define CONFIG_CMD_BSP #define CONFIG_CMD_EEPROM - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -68,8 +65,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -104,8 +99,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_LOOPW 1 /* enable loopw command */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 1b5b907..b66b3ff 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -62,19 +62,13 @@ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ #define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_BSP #define CONFIG_CMD_EEPROM @@ -92,8 +86,6 @@ */ #undef CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -130,8 +122,6 @@ #define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index b38a349..2b2e4e7 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -22,10 +22,6 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* Command line configuration */ -#define CONFIG_CMD_CACHE -#undef CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_MCFFEC diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index f2ea9a8..85b1c15 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -37,15 +37,10 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_USB #undef CONFIG_CMD_BMP -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_HOSTNAME M52277EVB #define CONFIG_SYS_UBOOT_END 0x3FFFF diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 2a198e5..bacd8e0 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -35,15 +35,9 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO - #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC # define CONFIG_MII 1 diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index a93bafc..735c4da 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -39,7 +39,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -55,7 +54,6 @@ #define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ #define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index ddb5cda..7c06fce 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -39,11 +39,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_IDE -#define CONFIG_CMD_PING #ifdef CONFIG_CMD_IDE /* ATA */ diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 7f5ee8a..d14f979 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -37,7 +37,6 @@ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text) - /* * BOOTP options */ @@ -49,9 +48,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_IDE /* ATA */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 718f31f..0753dc3 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -56,10 +56,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - #define CONFIG_BOOTDELAY 5 #define CONFIG_MCFFEC diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 195595f..1709ccc 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -55,12 +55,6 @@ #define CONFIG_BOOTP_HOSTNAME /* Available command configuration */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP - #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index eff0aa6..8131ea0 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -47,9 +47,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 42cbb0f..81e28f0 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -27,11 +27,7 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* Command line configuration */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#undef CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_SYS_UNIFY_CACHE diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index b2d544c..661063c 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -27,11 +27,7 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_NANDFLASH_SIZE diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index a906204..f0cf715 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -27,11 +27,7 @@ #define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ /* Command line configuration */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_NANDFLASH_SIZE diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 826de5b..e10c3e1 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -38,19 +38,11 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#define CONFIG_CMD_CACHE #undef CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_UBI -#define CONFIG_CMD_MII #undef CONFIG_CMD_NAND -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF - /* * NAND FLASH @@ -210,10 +202,6 @@ #define CONFIG_PRAM 2048 /* 2048 KB */ -/* HUSH */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index c778823..00bdbd1 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -39,17 +39,9 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C #undef CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF - /* Network configuration */ #define CONFIG_MCFFEC diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 7941040..f32dd36 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -39,21 +39,11 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #undef CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF - /* Network configuration */ #define CONFIG_MCFFEC diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 81ecbc8..5fa9683 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -29,14 +29,9 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ -#define CONFIG_CMD_CACHE #undef CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_USB #define CONFIG_SLTTMR diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 8621d7a..9a23e22 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -29,14 +29,9 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ -#define CONFIG_CMD_CACHE #undef CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_USB #define CONFIG_SLTTMR diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 1a793d7..75a26ed 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 - /*********************************************************** * Note that it may also be a MIP405T board which is a subset of the * MIP405 @@ -37,7 +36,6 @@ ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - /* * BOOTP options */ @@ -46,32 +44,22 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_IRQ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SAVES #define CONFIG_CMD_BSP #if !defined(CONFIG_MIP405T) - #define CONFIG_CMD_USB #endif - -#define CONFIG_SYS_HUSH_PARSER /************************************************************** * I2C Stuff: * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address @@ -94,7 +82,6 @@ /* last 6 bits of the address */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CONFIG_ENV_OFFSET 0x00000 /* environment starts at the beginning of the EEPROM */ #define CONFIG_ENV_SIZE 0x00800 /* 2k bytes may be used for env vars */ @@ -285,7 +272,6 @@ #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000 #define CONFIG_PORT_ADDR PER_PLD_ADDR + 5 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in On Chip SRAM) */ @@ -411,5 +397,4 @@ #define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version" #endif - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 9e9765c..e3e3b44 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -31,9 +31,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ESDHC_USE_PIO -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -321,11 +319,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* Pass open firmware flat tree */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -344,9 +337,7 @@ * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins. */ #ifdef CONFIG_MPC8XXX_SPI -#define CONFIG_CMD_SPI #define CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SF #endif /* @@ -437,11 +428,7 @@ * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index d440d88..fda894e 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -276,7 +276,6 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) - #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ | BR_DECC_CHK_GEN /* Use HW ECC */ \ | BR_PS_8 /* 8 bit port */ \ @@ -374,9 +373,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -430,7 +426,6 @@ #define TSEC2_PHYIDX 0 #endif - /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC1" @@ -477,14 +472,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 3b49f1c..41b40cb 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -302,9 +302,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -375,7 +372,6 @@ #define CONFIG_HAS_FSL_DR_USB #define CONFIG_SYS_SCCR_USBDRCM 3 -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL @@ -429,7 +425,6 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* @@ -462,9 +457,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI @@ -641,7 +633,6 @@ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" - #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 97f48e2..5c40e5b 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -224,8 +224,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER /* I2C */ #define CONFIG_SYS_I2C @@ -328,10 +326,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ASKENV #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index d218f59..4a1cebb 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -304,8 +304,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER /* I2C */ #define CONFIG_SYS_I2C @@ -339,7 +337,6 @@ #define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 - #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE @@ -409,13 +406,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_ASKENV #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -606,7 +599,6 @@ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" - #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 5b0900a..3518b3f 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -330,8 +330,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER /* I2C */ #define CONFIG_SYS_I2C @@ -466,7 +464,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -475,14 +472,10 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C #define CONFIG_CMD_DATE -#define CONFIG_CMD_MII #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -621,7 +614,6 @@ HID0_ENABLE_M_BIT |\ HID0_ENABLE_ADDRESS_BROADCAST) */ - #define CONFIG_SYS_HID2 HID2_HBE #define CONFIG_HIGH_BATS 1 /* High BATs supported */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 4346eda..8161903 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -151,7 +151,6 @@ /* * Support USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL @@ -485,21 +484,16 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION - #define CONFIG_CMD_FAT #define CONFIG_SUPPORT_VFAT #endif @@ -512,17 +506,12 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) - #define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif -#ifdef CONFIG_SYS_I2C - #define CONFIG_CMD_I2C -#endif - /* Watchdog */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -532,7 +521,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ @@ -718,7 +706,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif - /* * Environment Configuration */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 2475ae4..28ed9c0 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -318,9 +318,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -382,7 +379,6 @@ extern int board_pci_host_broken(void); #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL @@ -449,7 +445,6 @@ extern int board_pci_host_broken(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* @@ -479,13 +474,9 @@ extern int board_pci_host_broken(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE #if defined(CONFIG_PCI) @@ -503,10 +494,7 @@ extern int board_pci_host_broken(void); #define CONFIG_FSL_ESDHC #define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -701,7 +689,6 @@ extern int board_pci_host_broken(void); "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" - #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index aa66927..fa131e2 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -344,9 +344,6 @@ #define CONFIG_FSL_SERDES1 0xe3000 #define CONFIG_FSL_SERDES2 0xe3100 -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -459,7 +456,6 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* @@ -489,13 +485,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE #if defined(CONFIG_PCI) @@ -513,10 +505,7 @@ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -673,7 +662,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 980cb99..8cc7f02 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -156,7 +156,6 @@ #undef CONFIG_CLOCKS_IN_MHZ - /* * Memory map -- xxx -this is wrong, needs updating * @@ -381,9 +380,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* * I2C */ @@ -414,7 +410,6 @@ #define CONFIG_HARD_SPI #if defined(CONFIG_SPI_FLASH) -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 #endif @@ -554,7 +549,6 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #if defined(CONFIG_TSEC_ENET) @@ -622,9 +616,6 @@ * Command line configuration. */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO @@ -639,7 +630,6 @@ #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #endif @@ -651,7 +641,6 @@ #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE @@ -659,8 +648,6 @@ #endif #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 0a6d5bc..38bd38c 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -65,7 +65,6 @@ #define CONFIG_SYS_CLK_FREQ 33000000 #endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -136,7 +135,6 @@ #undef CONFIG_CLOCKS_IN_MHZ - /* * Local Bus Definitions */ @@ -201,7 +199,6 @@ #define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) #define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) - /* * 32KB, 8-bit wide for ADS config reg */ @@ -231,11 +228,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - /* * I2C */ @@ -283,7 +275,6 @@ #endif /* CONFIG_PCI */ - #if defined(CONFIG_TSEC_ENET) #define CONFIG_MII 1 /* MII PHY management */ @@ -298,7 +289,6 @@ #define TSEC1_FLAGS TSEC_GIGABIT #define TSEC2_FLAGS TSEC_GIGABIT - #if CONFIG_HAS_FEC #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" @@ -312,7 +302,6 @@ #endif /* CONFIG_TSEC_ENET */ - /* * Environment */ @@ -331,7 +320,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -340,12 +328,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #if defined(CONFIG_PCI) @@ -384,7 +369,6 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif - /* * Environment Configuration */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 79f81ec..d827d2a 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -133,7 +133,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_EMPTY_INFO - /* * SDRAM on the Local Bus */ @@ -254,11 +253,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - /* * I2C */ @@ -319,7 +313,6 @@ extern unsigned long get_clock_freq(void); #endif /* CONFIG_PCI */ - #if defined(CONFIG_TSEC_ENET) #define CONFIG_MII 1 /* MII PHY management */ @@ -358,13 +351,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO @@ -372,7 +361,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 2372d5f..6202dff 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -179,12 +179,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER|PIXIS_VSPEED2_TSEC3SER) #define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER|PIXIS_VCFGEN1_TSEC3SER) - #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ - #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -206,9 +204,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -320,7 +315,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* CONFIG_PCI */ - #if defined(CONFIG_TSEC_ENET) #define CONFIG_MII 1 /* MII PHY management */ @@ -371,20 +365,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI - #define CONFIG_CMD_EXT2 #endif /* @@ -393,7 +382,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI_PCI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_STORAGE diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 8d29762..dd07dc4 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -132,7 +132,6 @@ extern unsigned long get_clock_freq(void); * */ - /* * Local Bus Definitions */ @@ -331,9 +330,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* * I2C */ @@ -424,7 +420,6 @@ extern unsigned long get_clock_freq(void); #endif /* CONFIG_PCI */ - #if defined(CONFIG_TSEC_ENET) #define CONFIG_MII 1 /* MII PHY management */ @@ -482,13 +477,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO @@ -496,7 +487,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -585,7 +575,6 @@ extern unsigned long get_clock_freq(void); "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" - #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index b64bbe5..c68e1d8 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -33,7 +33,6 @@ #define CONFIG_FSL_VIA - #ifndef __ASSEMBLY__ extern unsigned long get_clock_freq(void); #endif @@ -131,7 +130,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_EMPTY_INFO - /* * SDRAM on the Local Bus */ @@ -252,11 +250,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - /* * I2C */ @@ -317,7 +310,6 @@ extern unsigned long get_clock_freq(void); #endif /* CONFIG_PCI */ - #if defined(CONFIG_TSEC_ENET) #define CONFIG_MII 1 /* MII PHY management */ @@ -356,13 +348,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO @@ -370,7 +358,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 2284646..fb76dd1 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -60,7 +60,6 @@ #define CONFIG_SYS_CLK_FREQ 33000000 #endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -133,7 +132,6 @@ #undef CONFIG_CLOCKS_IN_MHZ - /* * Local Bus Definitions */ @@ -198,7 +196,6 @@ #define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) #define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) - /* * 32KB, 8-bit wide for ADS config reg */ @@ -226,11 +223,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - /* * I2C */ @@ -278,7 +270,6 @@ #endif /* CONFIG_PCI */ - #ifdef CONFIG_TSEC_ENET #ifndef CONFIG_MII @@ -350,7 +341,6 @@ #endif - /* * Environment */ @@ -377,12 +367,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO @@ -391,7 +378,6 @@ #endif #if defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_CMD_MII #endif #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -426,7 +412,6 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif - /* * Environment Configuration */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index a130001..09e32eb 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -51,7 +51,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_ENABLE_36BIT_PHYS 1 - #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ @@ -144,14 +143,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_EMPTY_INFO - /* * SDRAM on the LocalBus */ #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - /*Chip select 2 - SDRAM*/ #define CONFIG_SYS_BR2_PRELIM 0xf0001861 #define CONFIG_SYS_OR2_PRELIM 0xfc006901 @@ -237,11 +234,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser*/ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - /* * I2C */ @@ -369,7 +361,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -378,13 +369,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO @@ -392,7 +379,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -466,14 +452,12 @@ extern unsigned long get_clock_freq(void); "ramargs=setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs\0" \ - #define CONFIG_NFSBOOTCOMMAND \ "run nfsargs;" \ "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" - #define CONFIG_RAMBOOTCOMMAND \ "run ramargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 0e003e5..923159b 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -248,11 +248,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser*/ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - /* * I2C */ @@ -468,13 +463,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO @@ -482,7 +473,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_MMC 1 @@ -491,10 +481,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_FSL_ESDHC #define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 95f59e0..9144f32 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -177,7 +177,6 @@ #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif - #define CONFIG_FLASH_BR_PRELIM \ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 @@ -318,7 +317,6 @@ #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) - /* NAND flash config */ #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ @@ -358,7 +356,6 @@ | BR_V) /* valid */ #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - /* Serial Port - controlled on board with jumper J8 * open - index 2 * shorted - index 1 @@ -377,9 +374,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -512,7 +506,6 @@ #endif /* CONFIG_PCI */ - #if defined(CONFIG_TSEC_ENET) #define CONFIG_MII 1 /* MII PHY management */ @@ -579,15 +572,11 @@ */ #define CONFIG_CMD_ERRATA #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI -#define CONFIG_CMD_EXT2 #endif /* @@ -596,7 +585,6 @@ #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI_PCI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_STORAGE diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index ac219d1..88ca4f3 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_TEXT_BASE 0xfff00000 - /* video */ #define CONFIG_FSL_DIU_FB @@ -136,14 +135,12 @@ #endif - #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 - #define CONFIG_SYS_FLASH_BASE 0xf0000000 /* start of FLASH 128M */ #define CONFIG_SYS_FLASH_BASE2 0xf8000000 @@ -161,7 +158,6 @@ #define CONFIG_SYS_BR3_PRELIM 0xe8000801 /* port size 8bit */ #define CONFIG_SYS_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ - #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xe8000000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ @@ -233,9 +229,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* maximum size of the flat tree (8K) */ #define OF_FLAT_TREE_MAX_SIZE 8192 @@ -280,7 +273,6 @@ #define CONFIG_SYS_PCIE2_IO_PHYS 0xe2000000 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00100000 /* 1M */ - #if defined(CONFIG_PCI) #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ @@ -389,7 +381,6 @@ #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U - /* * BAT5 128K Cacheable, non-guarded * 0xe400_0000 128K Init RAM for stack in the CPU DCache (no backing memory) @@ -427,7 +418,6 @@ #define CONFIG_SYS_IBAT7L (PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT7U CONFIG_SYS_DBAT7U - /* * Environment */ @@ -445,7 +435,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -454,22 +443,15 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_USB #endif - #define CONFIG_WATCHDOG /* watchdog enabled */ #define CONFIG_SYS_WATCHDOG_FREQ 5000 /* Feed interval, 5s */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 1f4ed2a..3569849 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -134,7 +134,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define SPD_EEPROM_ADDRESS3 0x53 /* CTLR 1 DIMM 0 */ #define SPD_EEPROM_ADDRESS4 0x54 /* CTLR 1 DIMM 1 */ - /* * These are used when DDR doesn't use SPD. */ @@ -269,9 +268,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* * I2C */ @@ -362,7 +358,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_PCI_PNP /* do pci plug-and-play */ - #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -443,7 +438,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* CONFIG_TSEC_ENET */ - #ifdef CONFIG_PHYS_64BIT #define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8) #define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2) @@ -603,7 +597,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -612,22 +605,16 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_USB #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -709,7 +696,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "dis-wd=mw.b ffdf0010 0x00; echo -expect:- 00; md.b ffdf0010 1\0" \ "maxcpus=2" - #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index f1af928..f4c9312 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -13,7 +13,6 @@ #define CONFIG_CPU_SH7722 1 #define CONFIG_MIGO_R 1 -#define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 249e11b..5719e86 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -185,7 +185,6 @@ #define CONFIG_CMD_PCI - /* * PCI Windows * Memory space is mapped 1-1, but I/O space must start from 0. @@ -619,9 +618,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -656,15 +652,12 @@ extern unsigned long get_sdram_size(void); #define CONFIG_RTC_PT7C4338 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_CMD_I2C - /* * SPI interface will not be available in case of NAND boot SPI CS0 will be * used for SLIC */ #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) /* eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif @@ -705,7 +698,6 @@ extern unsigned long get_sdram_size(void); #endif /* CONFIG_TSEC_ENET */ - /* SATA */ #define CONFIG_FSL_SATA #define CONFIG_FSL_SATA_V2 @@ -726,7 +718,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_MMC #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC @@ -739,7 +730,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE @@ -798,16 +788,12 @@ extern unsigned long get_sdram_size(void); #define CONFIG_CMD_DATE #define CONFIG_CMD_ERRATA #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #undef CONFIG_WATCHDOG /* watchdog disabled */ #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ || defined(CONFIG_FSL_SATA) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index bc4c733..8b29951 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -172,7 +172,6 @@ #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif - /* DDR Setup */ #define CONFIG_DDR_SPD #define CONFIG_VERY_BIG_RAM @@ -217,7 +216,6 @@ #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8675f608 - /* * Memory map * @@ -406,9 +404,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Video */ #ifdef CONFIG_FSL_DIU_FB @@ -469,7 +464,6 @@ #define CONFIG_HARD_SPI -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -558,20 +552,16 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #define CONFIG_MMC #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #endif #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -665,9 +655,6 @@ */ #define CONFIG_CMD_ERRATA #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -682,11 +669,9 @@ #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT #endif #endif diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index a53b1ac..fcbe288 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -172,9 +172,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -196,8 +193,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_CMD_I2C - /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. @@ -258,8 +253,6 @@ extern unsigned long get_clock_freq(void); * Command line configuration. */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) @@ -274,13 +267,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif #endif diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 2d27fcf..b7a08e0 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -336,9 +336,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -400,7 +397,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); /* * eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -572,7 +568,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_FMAN_ENET @@ -604,13 +599,8 @@ unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #ifdef CONFIG_PCI #define CONFIG_CMD_PCI @@ -623,25 +613,19 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif -#define CONFIG_CMD_EXT2 - #define CONFIG_MMC #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 81d535f..9f3c037 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -21,14 +21,12 @@ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 - /* Serial Console Configuration */ #define CONFIG_5xx_CONS_SCI1 #undef CONFIG_5xx_CONS_SCI2 #define CONFIG_BAUDRATE 9600 - /* * BOOTP options */ @@ -37,7 +35,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -47,7 +44,6 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_IRQ - #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else @@ -135,7 +131,6 @@ */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - /*----------------------------------------------------------------------- * FLASH organization *----------------------------------------------------------------------- @@ -165,7 +160,6 @@ #define CONFIG_ENV_OFFSET ((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE) /* Environment starts at this adress */ #endif - #define CONFIG_SPI 1 #define CONFIG_SYS_SPI_CS_USED 0x09 /* CS0 and CS3 are used */ #define CONFIG_SYS_SPI_CS_BASE 0x08 /* CS3 is active low */ @@ -224,7 +218,6 @@ */ #define CONFIG_SYS_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */ - #define CONFIG_SYS_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0) /*----------------------------------------------------------------------- diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index b5959c8..4bd06a4 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -21,13 +21,11 @@ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 - /*********************************************************** * Clock ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - /* * BOOTP options */ @@ -36,30 +34,21 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #define CONFIG_CMD_IDE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI -#define CONFIG_CMD_CACHE #define CONFIG_CMD_IRQ #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_REGINFO #define CONFIG_CMD_FDC #define CONFIG_CMD_SCSI -#define CONFIG_CMD_FAT #define CONFIG_CMD_DATE -#define CONFIG_CMD_USB -#define CONFIG_CMD_MII #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_BSP -#define CONFIG_SYS_HUSH_PARSER /************************************************************** * I2C Stuff: * the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address @@ -86,7 +75,6 @@ /* last 6 bits of the address */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - /*************************************************************** * Definitions for Serial Presence Detect EEPROM address * (to get SDRAM settings) @@ -101,13 +89,11 @@ **************************************************************/ #define CONFIG_BAUDRATE 9600 /* STD Baudrate */ - #define CONFIG_BOOTDELAY 5 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ - #define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */ #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */ @@ -236,7 +222,6 @@ #define CONFIG_PORT_ADDR 0xF4000000 #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in On Chip SRAM) */ @@ -358,5 +343,4 @@ #define CONFIG_ISO_STRING "MEV-10066-001" #define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG - #endif /* __CONFIG_H */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 345affa..71a0375 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -47,7 +47,6 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ - /* * BOOTP options */ @@ -56,22 +55,15 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ #define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT #define CONFIG_CMD_NAND #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_USB #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -90,8 +82,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index bb0c8bb..a622578 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -56,13 +56,9 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -96,7 +92,6 @@ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ @@ -162,7 +157,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* 'E' for empty sector (flinfo) */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ - /* * Start addresses for the final memory configuration * (Set up by the startup code) diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index dab4fa7..005fa2a 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -158,7 +158,6 @@ #define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F - #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 @@ -270,16 +269,10 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_REGINFO /* POST support */ @@ -319,7 +312,6 @@ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index f07b2d1..12260aa 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -202,7 +202,6 @@ #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif - #ifndef __ASSEMBLY__ unsigned long get_board_sys_clk(void); unsigned long get_board_ddr_clk(void); @@ -510,10 +509,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* Video */ #ifdef CONFIG_PPC_T1024 /* no DIU on T1023 */ #define CONFIG_FSL_DIU_FB @@ -573,7 +568,6 @@ unsigned long get_board_ddr_clk(void); */ #ifndef CONFIG_SPL_BUILD #endif -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_BAR #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -673,7 +667,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* @@ -683,11 +676,9 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #endif /* @@ -697,10 +688,7 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -835,14 +823,9 @@ unsigned long get_board_ddr_clk(void); * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -888,7 +871,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BAUDRATE 115200 #define __USB_PHY_TYPE utmi - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 1a22bee..74274ca 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -217,7 +217,6 @@ #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif - #ifndef __ASSEMBLY__ unsigned long get_board_sys_clk(void); unsigned long get_board_ddr_clk(void); @@ -239,7 +238,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST @@ -511,10 +509,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* Video */ #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ #ifdef CONFIG_FSL_DIU_FB @@ -560,10 +554,6 @@ unsigned long get_board_ddr_clk(void); /* * eSPI - Enhanced SPI */ -#if defined(CONFIG_T1024RDB) -#elif defined(CONFIG_T1023RDB) -#endif -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_BAR #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -680,11 +670,9 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #endif /* @@ -694,10 +682,7 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -838,14 +823,9 @@ unsigned long get_board_ddr_clk(void); * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -929,7 +909,6 @@ unsigned long get_board_ddr_clk(void); "setenv loadaddr 0x1000000;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" - #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index f52889d..4c1175d 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -411,10 +411,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* Video */ #define CONFIG_FSL_DIU_FB #ifdef CONFIG_FSL_DIU_FB @@ -454,7 +450,6 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_PCA_ADDR 0x77 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ - /* I2C bus multiplexer */ #define I2C_MUX_CH_DEFAULT 0x8 #define I2C_MUX_CH_DIU 0xC @@ -473,7 +468,6 @@ unsigned long get_board_ddr_clk(void); /* * eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -554,7 +548,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* @@ -566,11 +559,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #endif #endif @@ -580,10 +571,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_ESDHC #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_FSL_ESDHC_ADAPTER_IDENT #endif @@ -708,14 +696,9 @@ unsigned long get_board_ddr_clk(void); * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 84e195d..9a3965f 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -465,10 +465,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ #endif -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB) /* Video */ #define CONFIG_FSL_DIU_FB @@ -529,7 +525,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg * eSPI - Enhanced SPI */ #define CONFIG_SPI_FLASH_BAR -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 #define CONFIG_ENV_SPI_BUS 0 @@ -611,7 +606,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* @@ -623,11 +617,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #endif #endif @@ -636,10 +628,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -715,7 +704,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #endif #endif - #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ @@ -775,13 +763,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #ifdef CONFIG_T1042RDB_PI #define CONFIG_CMD_DATE #endif -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 5957fa8..85df388 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -455,10 +455,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* * I2C */ @@ -544,7 +540,6 @@ unsigned long get_board_ddr_clk(void); #ifndef CONFIG_SPL_BUILD #endif -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_BAR #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -718,18 +713,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* * USB */ #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #define CONFIG_HAS_FSL_DR_USB #endif @@ -737,20 +729,16 @@ unsigned long get_board_ddr_clk(void); * SDHC */ #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_FSL_ESDHC_ADAPTER_IDENT #endif - /* * Dynamic MTD Partition support with mtdparts */ @@ -776,13 +764,8 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index e0769d0..5e2d659 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -138,7 +138,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST @@ -415,10 +414,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* * I2C */ @@ -496,7 +491,6 @@ unsigned long get_board_ddr_clk(void); */ #ifdef CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 #endif @@ -658,7 +652,6 @@ unsigned long get_board_ddr_clk(void); #define FM1_10GEC4_PHY_ADDR 0x01 #endif - #ifdef CONFIG_FMAN_ENET #define CONFIG_MII /* MII PHY management */ #define CONFIG_ETHPRIME "FM1@DTSEC3" @@ -681,18 +674,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* * USB */ #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #define CONFIG_HAS_FSL_DR_USB #endif @@ -700,14 +690,11 @@ unsigned long get_board_ddr_clk(void); * SDHC */ #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -734,11 +721,7 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_MII -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 91857d6..276428f 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -343,7 +343,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_RAMBOOT #endif - /* I2C */ #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ @@ -401,11 +400,9 @@ unsigned long get_board_ddr_clk(void); /* * eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 - /* Qman/Bman */ #ifndef CONFIG_NOBQFMAN #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ @@ -493,7 +490,6 @@ unsigned long get_board_ddr_clk(void); #define FM2_10GEC2_PHY_ADDR 0x3 #endif - /* SATA */ #ifdef CONFIG_FSL_SATA_V2 #define CONFIG_LIBATA @@ -510,7 +506,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_FMAN_ENET @@ -528,12 +523,10 @@ unsigned long get_board_ddr_clk(void); /* * USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #define CONFIG_HAS_FSL_DR_USB #define CONFIG_MMC @@ -542,10 +535,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_ESDHC_DETECT_QUIRK \ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index faf06a0..a0cce85 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -154,14 +154,12 @@ #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR3 - /* * IFC Definitions */ #define CONFIG_SYS_FLASH_BASE 0xe0000000 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -209,10 +207,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -288,7 +282,6 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_FMAN_ENET @@ -306,13 +299,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #ifdef CONFIG_PCI #define CONFIG_CMD_PCI @@ -356,7 +344,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 - #define CONFIG_BAUDRATE 115200 #define CONFIG_HVBOOT \ @@ -579,7 +566,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_RAMBOOT #endif - /* I2C */ #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ @@ -610,11 +596,9 @@ unsigned long get_board_ddr_clk(void); /* * eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 - /* Qman/Bman */ #ifndef CONFIG_NOBQFMAN #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ @@ -704,7 +688,6 @@ unsigned long get_board_ddr_clk(void); #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR #endif - /* SATA */ #ifdef CONFIG_FSL_SATA_V2 #define CONFIG_LIBATA @@ -721,7 +704,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_FMAN_ENET @@ -733,12 +715,10 @@ unsigned long get_board_ddr_clk(void); /* * USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #define CONFIG_HAS_FSL_DR_USB #define CONFIG_MMC @@ -747,10 +727,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index e646c00..42ebcf0 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -117,7 +117,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV #endif /* #ifndef CONFIG_TQM5200S */ - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -129,8 +128,6 @@ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_OHCI_BE_CONTROLLER #define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB #undef CONFIG_SYS_USB_OHCI_BOARD_INIT #define CONFIG_SYS_USB_OHCI_CPU_INIT @@ -152,7 +149,6 @@ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 #endif - /* * BOOTP options */ @@ -161,20 +157,13 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP #define CONFIG_CMD_BSP #ifdef CONFIG_VIDEO @@ -189,8 +178,6 @@ #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) #define CONFIG_CMD_IDE - #define CONFIG_CMD_FAT - #define CONFIG_CMD_EXT2 #endif #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ @@ -203,7 +190,6 @@ #define CONFIG_CMD_DIAG #endif - #define CONFIG_TIMESTAMP /* display image timestamps */ #if (CONFIG_SYS_TEXT_BASE != 0xFFF00000) @@ -490,7 +476,6 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif - #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -604,7 +589,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) @@ -629,11 +613,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ /* - * Enable loopw command. - */ -#define CONFIG_LOOPW - -/* * Various low-level settings */ #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index d03f2e6..395805c 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -95,29 +95,22 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP #ifdef CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP #endif - #define CONFIG_NETCONSOLE /* @@ -126,7 +119,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 7d39766..ec36637 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -93,35 +93,26 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 9ed469a..2aac682 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -282,21 +282,14 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -311,8 +304,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index c70c4d7..00c0cc3 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -84,7 +84,6 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -93,14 +92,9 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE @@ -110,7 +104,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 52cba86..ca26024 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -84,7 +84,6 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -93,25 +92,18 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index fb2652b..39cf02e 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -86,35 +86,26 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 301a0a8..30bfb8a 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -115,36 +115,27 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_EEPROM #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index a390e3f..abe49b9 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -86,24 +86,17 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE @@ -113,7 +106,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 0d2e119..48252c4 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -86,35 +86,26 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 6fd08c7..a73395a 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -89,35 +89,26 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index fcdc3e5..3db6fa1 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -89,35 +89,26 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 2a0fdf5..76c8f7a 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -127,7 +127,6 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -135,29 +134,21 @@ #define CONFIG_TIMESTAMP /* but print image timestmps */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_SNTP - #define CONFIG_NETCONSOLE - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index c9925ab..88b97ab 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -123,7 +123,6 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -131,20 +130,12 @@ #define CONFIG_TIMESTAMP /* but print image timestmps */ - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - /* * Miscellaneous configurable options @@ -152,7 +143,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -171,11 +161,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ /* - * Enable loopw command. - */ -#define CONFIG_LOOPW - -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 139e629..4ae61ca 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -342,9 +342,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -369,8 +366,6 @@ */ #define CONFIG_HARD_SPI -#define CONFIG_CMD_SF 1 -#define CONFIG_CMD_SPI 1 #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 @@ -473,14 +468,8 @@ * Command line configuration. */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ERRATA #define CONFIG_CMD_CRAMFS @@ -496,7 +485,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE @@ -508,15 +496,12 @@ #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_MMC_SPI #define CONFIG_CMD_MMC_SPI #define CONFIG_GENERIC_MMC #endif #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) || defined(CONFIG_FSL_SATA) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -567,7 +552,6 @@ #error "UCP1020 module revision is not defined !!!" #endif -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SERVERIP #define CONFIG_MII /* MII PHY management */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index de7d5c2..4e349d5 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -13,7 +13,6 @@ #ifndef __CONFIG_H #define __CONFIG_H - #define MACH_TYPE_MPL_VCMA9 227 /* @@ -29,7 +28,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 - #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH /* input clock of PLL (VCMA9 has 12MHz input clock) */ @@ -50,20 +48,14 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_USB #define CONFIG_CMD_REGINFO #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_CMD_BSP #define CONFIG_CMD_NAND #define CONFIG_BOARD_LATE_INIT -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING /* @@ -118,7 +110,6 @@ /* RTC */ #define CONFIG_RTC_S3C24X0 - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -210,7 +201,6 @@ #define MULTI_PURPOSE_SOCKET_ADDR 0x08000000 /* File system */ -#define CONFIG_CMD_FAT #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_JFFS2 diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index a734c28..d401d3e 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -58,12 +58,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_BSP #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -77,8 +73,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 31348da..e0c92d0 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -45,10 +45,7 @@ * Command line configuration. */ #define CONFIG_CMD_BSP -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_MAY_FAIL @@ -56,10 +53,8 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SERVERIP #define CONFIG_NET_RETRY_COUNT 3 -#define CONFIG_CMD_LINK_LOCAL #define CONFIG_NETCONSOLE #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_CMD_PING #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS /* needed for UBI */ #define CONFIG_FLASH_CFI_MTD @@ -233,15 +228,12 @@ * +- 31 0 PSC1 */ - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 @@ -257,7 +249,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_LOOPW #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ /* diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index a883afb..ee1bff8 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -88,19 +88,11 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB -#define CONFIG_CMD_MII -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_CMD_DISPLAY #if defined(CONFIG_PCI) @@ -227,7 +219,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -260,7 +251,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) @@ -282,7 +272,6 @@ # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif - /* * Various low-level settings */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index 57421c6..bcf6942 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -342,7 +342,6 @@ CLOCK_SCCR2_DIU_EN | \ CLOCK_SCCR2_I2C_EN) - #define CONFIG_CMDLINE_EDITING 1 /* command line history */ /* I2C */ @@ -393,16 +392,10 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #undef CONFIG_CMD_FUSE -#define CONFIG_CMD_I2C #undef CONFIG_CMD_IDE -#undef CONFIG_CMD_EXT2 #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 2f53d73..ab9a4ca 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -167,7 +167,6 @@ */ #define CONFIG_CMD_DTT #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB /*----------------------------------------------------------------------- * NAND FLASH diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index f6c0147..7b9470c 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -103,21 +103,16 @@ * SD (MMC) controller */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_DOS_PARTITION #define CONFIG_FTSDC010 #define CONFIG_FTSDC010_NUMBER 1 #define CONFIG_FTSDC010_SDIO -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 /* * Command line configuration. */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_PING /* * Miscellaneous configurable options diff --git a/include/configs/alt.h b/include/configs/alt.h index 6bd2983..3a81c49 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -68,7 +68,6 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 /* i2c */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SH #define CONFIG_SYS_I2C_SLAVE 0x7F @@ -91,7 +90,6 @@ /* MMCIF */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC #define CONFIG_SH_MMCIF #define CONFIG_SH_MMCIF_ADDR 0xee200000 diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 29b693a..cd8923d 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -285,13 +285,8 @@ */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 @@ -311,7 +306,6 @@ #endif #ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif @@ -322,11 +316,6 @@ #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" #endif /* CONFIG_DM_ETH */ - -/* USB TI's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0451 -#define CONFIG_G_DNL_PRODUCT_NUM 0xD022 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_USB_MUSB_GADGET */ /* @@ -346,7 +335,6 @@ #define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_NAND /* disable host part of MUSB in SPL */ -#undef CONFIG_USB_MUSB_HOST /* disable EFI partitions and partition UUID support */ #undef CONFIG_PARTITION_UUIDS #undef CONFIG_EFI_PARTITION @@ -360,7 +348,6 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC -#define CONFIG_CMD_DFU #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -442,7 +429,6 @@ #endif /* SPI flash. */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 24000000 /* Network. */ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 3cc2874..822e1c8 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -100,11 +100,9 @@ #ifdef CONFIG_USB_AM35X #ifdef CONFIG_USB_MUSB_HCD -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONGIG_CMD_STORAGE -#define CONFIG_CMD_FAT #ifdef CONFIG_USB_KEYBOARD #define CONFIG_SYS_USB_EVENT_POLL @@ -128,16 +126,9 @@ #endif /* CONFIG_USB_AM35X */ /* commands to include */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#undef CONFIG_CMD_PING - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C @@ -208,7 +199,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index fae8138..6f83870 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -94,13 +94,11 @@ * Enable CONFIG_USB_MUSB_GADGET for Device functionalities. */ #define CONFIG_USB_MUSB_AM35X -#define CONFIG_USB_MUSB_HOST #define CONFIG_USB_MUSB_PIO_ONLY #ifdef CONFIG_USB_MUSB_AM35X #ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONGIG_CMD_STORAGE @@ -113,7 +111,6 @@ #endif /* CONFIG_USB_MUSB_HOST */ #ifdef CONFIG_USB_MUSB_GADGET -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #endif /* CONFIG_USB_MUSB_GADGET */ @@ -122,19 +119,7 @@ /* commands to include */ #define CONFIG_CMD_NAND -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_PART -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_CMD_MTDPARTS /* I2C */ @@ -286,7 +271,6 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_VERSION_VARIABLE #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_PARTITION_UUIDS /* We set the max number of command args high to avoid HUSH bugs. */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index fd3f6a7..5b49988 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -11,8 +11,6 @@ #define CONFIG_AM43XX -#define CONFIG_CMD_FAT - #define CONFIG_BOARD_LATE_INIT #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_CACHELINE_SIZE 32 @@ -109,7 +107,6 @@ #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 -#define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_DWC3 @@ -121,20 +118,18 @@ #define CONFIG_AM437X_USB2PHY2_HOST #endif -/* USB GADGET */ -#if !defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)) -#define CONFIG_USB_DWC3_PHY_OMAP -#define CONFIG_USB_DWC3_OMAP -#define CONFIG_USB_DWC3 -#define CONFIG_USB_DWC3_GADGET - -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 -#define CONFIG_USB_GADGET_DUALSPEED +#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT) +#undef CONFIG_USB_DWC3_PHY_OMAP +#undef CONFIG_USB_DWC3_OMAP +#undef CONFIG_USB_DWC3 +#undef CONFIG_USB_DWC3_GADGET + +#undef CONFIG_USB_GADGET_DOWNLOAD +#undef CONFIG_USB_GADGET_VBUS_DRAW +#undef CONFIG_G_DNL_MANUFACTURER +#undef CONFIG_G_DNL_VENDOR_NUM +#undef CONFIG_G_DNL_PRODUCT_NUM +#undef CONFIG_USB_GADGET_DUALSPEED #endif /* @@ -152,7 +147,6 @@ /* USB Device Firmware Update support */ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_RAM -#define CONFIG_CMD_DFU #define CONFIG_DFU_MMC #define DFU_ALT_INFO_MMC \ @@ -223,8 +217,6 @@ /* SPI */ #undef CONFIG_OMAP3_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI #define CONFIG_TI_SPI_MMAP #define CONFIG_QSPI_SEL_GPIO 48 #define CONFIG_SF_DEFAULT_SPEED 48000000 @@ -325,9 +317,6 @@ #ifndef CONFIG_SPL_BUILD /* CPSW Ethernet */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_MII #define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 1fffdb1..32d7d4d 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -48,15 +48,12 @@ #define CONFIG_EFI_PARTITION /* CPSW Ethernet */ -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ #define CONFIG_PHY_GIGE /* per-board part of CPSW */ @@ -66,7 +63,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* USB xHCI HOST */ -#define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 0388ffc..9fa4d16 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -10,7 +10,6 @@ #ifndef __AMCC_COMMON_H #define __AMCC_COMMON_H - #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */ #define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1) @@ -51,18 +50,11 @@ /* * Commands */ -#define CONFIG_CMD_ASKENV #if defined(CONFIG_440) -#define CONFIG_CMD_CACHE #endif -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO /* @@ -86,14 +78,11 @@ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_LOOPW /* enable loopw command */ #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE /* include version env variable */ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ - #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index bbab8b2..e819185 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -22,8 +22,6 @@ #define CONFIG_BOOTCOMMAND "bootm ffc20000" #undef CONFIG_CMD_AES -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_TIMER #define CONFIG_CMD_DIAG /* undef to save memory */ @@ -45,7 +43,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* no console @ startup */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */ diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index 03810c3..ae58ec8 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -14,10 +14,8 @@ #define CONFIG_CPU_SH7723 1 #define CONFIG_AP325RXA 1 -#define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM #define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_BAUDRATE 38400 diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index 4bcfb4c..be8feed 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -18,8 +18,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x8BFC0000 -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_CMD_SDRAM #define CONFIG_CMD_ENV @@ -42,7 +40,6 @@ #define CONFIG_BITBANGMII_MULTI /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SH_SH7734_I2C 1 #define CONFIG_HARD_I2C 1 #define CONFIG_I2C_MULTI_BUS 1 diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index 32e9ba3..514e9ee 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -26,13 +26,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC support */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -44,7 +42,6 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* PCI host support */ #define CONFIG_PCI @@ -55,7 +52,6 @@ #define CONFIG_E1000_NO_NVM /* General networking support */ -#define CONFIG_CMD_DHCP #define CONFIG_IP_DEFRAG #define CONFIG_TFTP_BLOCKSIZE 16384 #define CONFIG_TFTP_TSIZE diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 018d586..2291647 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -65,24 +65,14 @@ /* * U-Boot Commands */ -#define CONFIG_CMD_ASKENV /* ask for env variable */ #define CONFIG_CMD_BSP /* Board Specific functions */ -#define CONFIG_CMD_CACHE /* icache, dcache */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_DNS #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_IMX_FUSE /* imx iim fuse */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII /* MII support */ -#define CONFIG_CMD_MMC #define CONFIG_CMD_MTDPARTS /* MTD partition support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_PING /* ping support */ #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS @@ -148,12 +138,9 @@ /* Boot argument buffer size */ #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* enable the "hush" shell */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* secondary prompt string */ #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_PREBOOT "run check_flash check_env;" - /* * Boot Linux */ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index 2bbef55..bb29f3f 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -24,17 +24,8 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ @@ -42,7 +33,6 @@ #define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - /* Environment */ #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_NAND @@ -96,7 +86,6 @@ #define CONFIG_USB_STORAGE #endif - /* RTC */ #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_PCF8563 diff --git a/include/configs/aria.h b/include/configs/aria.h index c56a2e3..2d32da1 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -326,10 +326,6 @@ #define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR #define CONFIG_CMDLINE_EDITING 1 /* command line history */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif /* * PCI @@ -406,15 +402,10 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #undef CONFIG_CMD_FUSE -#define CONFIG_CMD_I2C #undef CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index efbf816..d87d40c 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -29,9 +29,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -41,7 +38,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_MTD #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_SPEED 20000000 @@ -185,7 +181,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -216,7 +211,6 @@ #define CONFIG_CMD_DATE /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 1ce9b9a..681b4e7 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -18,10 +18,6 @@ #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_BOOTZ #define BOARD_LATE_INIT diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index fcb5f81..c468484 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -35,7 +35,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_I2C /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 828bc60..b08276f 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -59,9 +59,7 @@ /* Define which commands should be available at u-boot command prompt */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C #if ENABLE_JFFS #define CONFIG_CMD_JFFS2 #endif @@ -69,8 +67,6 @@ #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER - #define CONFIG_MCFRTC #undef RTC_DEBUG diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 6525b5c..dc955b2 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -30,7 +30,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_CMD_BOOTZ /* general purpose I/O */ #define CONFIG_AT91_GPIO @@ -48,8 +47,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #ifdef CONFIG_SYS_USE_MMC @@ -115,7 +112,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 5903f7c..2979b25 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -58,9 +58,6 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_CMD_BOOTZ - - /* * Memory Configuration */ @@ -120,11 +117,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB /* * Network Driver Setting @@ -191,7 +183,6 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Print Buffer Size */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 7820295..9db8d12 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -45,8 +45,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -76,11 +74,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB 1 /* * SDRAM: 1 bank, min 32, max 128 MB @@ -131,7 +125,6 @@ #define AT91_SPI_CLK 15000000 #else /* Enable MMC. The MCCK is conflicted with DataFlash */ -#define CONFIG_CMD_MMC #endif #ifdef CONFIG_AT91SAM9G20EK diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index c7ba9eb..b369624 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -82,10 +82,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -146,7 +143,6 @@ #endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index c826427..f248049 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -45,8 +45,6 @@ #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - /* * Hardware drivers */ @@ -91,11 +89,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB 1 /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -121,11 +115,6 @@ #define CONFIG_GENERIC_ATMEL_MCI #endif -/* FAT */ -#ifdef CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - /* NOR flash, if populated */ #ifdef CONFIG_SYS_USE_NORFLASH #define CONFIG_SYS_FLASH_CFI 1 @@ -290,7 +279,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -332,7 +320,6 @@ #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index d4baf48..18eb01d 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -30,8 +30,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -77,10 +75,7 @@ /* No NOR flash */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -106,7 +101,6 @@ #endif /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC @@ -115,7 +109,6 @@ #endif #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -183,7 +176,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 14a8436..2f8c377 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -67,14 +67,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND -#define CONFIG_CMD_SF -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x20000000 @@ -222,7 +215,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 0d45354..d178d9d 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -31,8 +31,6 @@ #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - #define CONFIG_ATMEL_LEGACY #define CONFIG_AT91_GPIO 1 #define CONFIG_AT91_GPIO_PULLUP 1 @@ -61,7 +59,6 @@ #undef CONFIG_FB_ADDR #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - /* LED */ #define CONFIG_AT91_LED #define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */ @@ -73,7 +70,6 @@ /* * Command line configuration. */ -#undef CONFIG_CMD_USB #define CONFIG_CMD_NAND 1 @@ -113,13 +109,11 @@ #endif /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_GENERIC_ATMEL_MCI -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index cd91a7b..251094e 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -26,8 +26,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -65,20 +63,13 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND -#define CONFIG_CMD_SF -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB /* * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0) * NB: in this case, USB 1.1 devices won't be recognized. */ - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x20000000 @@ -224,7 +215,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 11d7d0c..e6f6125 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -80,15 +80,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI - #define CONFIG_ATMEL_USART #define CONFIG_MACB @@ -100,7 +92,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_ATMEL_SPI - #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 0dcc192..fb12632 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -99,16 +99,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_MII - #define CONFIG_ATMEL_USART #define CONFIG_MACB @@ -120,7 +111,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_ATMEL_SPI - #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 8cd7c35..9a647d8 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -101,13 +101,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC - #define CONFIG_ATMEL_USART #define CONFIG_MACB diff --git a/include/configs/axs101.h b/include/configs/axs101.h index 006ddb3..1bd4729 100644 --- a/include/configs/axs101.h +++ b/include/configs/axs101.h @@ -105,8 +105,6 @@ /* * Commands still not supported in Kconfig */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_AUTO_COMPLETE diff --git a/include/configs/baltos.h b/include/configs/baltos.h index bfe3fa3..4f3909a 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -198,7 +198,6 @@ "run mmcboot;" \ "run nandboot;" - /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ @@ -271,20 +270,14 @@ */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#define CONFIG_USBDOWNLOAD_GADGET -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_OTG #ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif @@ -292,16 +285,10 @@ #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" - -/* USB TI's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_USB_MUSB_GADGET */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) /* disable host part of MUSB in SPL */ -#undef CONFIG_USB_MUSB_HOST /* disable EFI partitions and partition UUID support */ #undef CONFIG_PARTITION_UUIDS #undef CONFIG_EFI_PARTITION @@ -317,7 +304,6 @@ #define CONFIG_PHY_ADDR 0 #define CONFIG_PHY_SMSC #define CONFIG_MII -#define CONFIG_CMD_MII #define CONFIG_PHY_ATHEROS /* NAND support */ diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index bb2abf1..784bfef 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -185,12 +185,8 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB #ifdef CONFIG_BAMBOO_NAND #define CONFIG_CMD_NAND diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 6c860a6..e391c91 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -436,13 +436,8 @@ DEFAULT_LINUX_BOOT_ENV \ */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 @@ -462,23 +457,15 @@ DEFAULT_LINUX_BOOT_ENV \ #endif #ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif #ifdef CONFIG_USB_MUSB_GADGET -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE - -/* USB TI's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0451 -#define CONFIG_G_DNL_PRODUCT_NUM 0xD022 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_USB_MUSB_GADGET */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) /* disable host part of MUSB in SPL */ -#undef CONFIG_USB_MUSB_HOST /* disable EFI partitions and partition UUID support */ #undef CONFIG_PARTITION_UUIDS #undef CONFIG_EFI_PARTITION @@ -492,7 +479,6 @@ DEFAULT_LINUX_BOOT_ENV \ #ifndef CONFIG_SPL_BUILD #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC -#define CONFIG_CMD_DFU #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -574,7 +560,6 @@ DEFAULT_LINUX_BOOT_ENV \ #endif /* SPI flash. */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 24000000 /* Network. */ diff --git a/include/configs/bayleybay.h b/include/configs/bayleybay.h index 92326e1..8f31436 100644 --- a/include/configs/bayleybay.h +++ b/include/configs/bayleybay.h @@ -30,7 +30,6 @@ #define CONFIG_SDHCI #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SDMA -#define CONFIG_CMD_MMC /* Environment configuration */ #define CONFIG_ENV_SECT_SIZE 0x1000 diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index cf25bde..889e5db 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -88,8 +88,11 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_IS_NOWHERE +/* must fit into GPT:u-boot-env partition */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (0x00011a00 * 512) +#define CONFIG_ENV_SIZE (8 * 512) #define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */ @@ -111,7 +114,6 @@ /* version string, parser, etc */ #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP @@ -122,12 +124,6 @@ #define CONFIG_BOOTCOMMAND "" /* Commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#define CONFIG_CMD_BOOTZ #define CONFIG_FAT_WRITE /* Fastboot and USB OTG */ @@ -138,14 +134,7 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY -#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USBID_ADDR 0x34052c46 -#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */ -#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */ -#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation" #endif /* __BCM28155_AP_H */ diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h index 344f89d..d5888e8 100644 --- a/include/configs/bcm_ep_board.h +++ b/include/configs/bcm_ep_board.h @@ -72,7 +72,6 @@ /* version string, parser, etc */ #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_COMMAND_HISTORY #define CONFIG_SYS_LONGHELP @@ -81,9 +80,6 @@ #define CONFIG_MX_CYCLIC /* Commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE /* SHA hashing */ @@ -93,9 +89,6 @@ #define CONFIG_SHA256 /* Enable Time Command */ -#define CONFIG_CMD_TIME - -#define CONFIG_CMD_BOOTZ /* Misc utility code */ #define CONFIG_BOUNCE_BUFFER diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 658b16d..e95deac 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf536-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -39,14 +37,12 @@ #define CONFIG_SCLK_DIV 3 #define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) - /* * Memory Settings */ #define CONFIG_MEM_ADD_WDTH 9 #define CONFIG_MEM_SIZE 32 - /* * SDRAM Settings */ @@ -60,7 +56,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -75,7 +70,6 @@ #define CONFIG_ROOTPATH "/romfs/brettl2" #endif - /* * Flash Settings */ @@ -87,7 +81,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 135 - /* * Env Storage Settings */ @@ -115,14 +108,12 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * Misc Settings */ @@ -133,7 +124,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS -#define CONFIG_SYS_HUSH_PARSER /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/beaver.h b/include/configs/beaver.h index f68d8ee..a1c2002 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -26,13 +26,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -44,15 +42,12 @@ #define CONFIG_TEGRA_SLINK_CTRLS 6 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER @@ -64,7 +59,6 @@ #define CONFIG_CMD_PCI /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 68a91a6..dc7d83f 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf506-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -52,7 +49,6 @@ #define CONFIG_SYS_MONITOR_LEN (4 * 1024) #define CONFIG_SYS_MALLOC_LEN (4 * 1024) - /* * Flash Settings */ @@ -72,10 +68,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -/* -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -*/ /* * Env Storage Settings @@ -83,7 +75,6 @@ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x400 - /* * Misc Settings */ diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 9f44ebd..510cd47 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf518-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -56,7 +53,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) - /* * Network Settings */ @@ -98,7 +94,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 71 - /* * SPI Settings */ @@ -106,7 +101,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -124,14 +118,12 @@ #endif #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * SDH Settings */ @@ -141,7 +133,6 @@ #define CONFIG_BFIN_SDH #endif - /* * Misc Settings */ diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h index 5a6067e..66339ca 100644 --- a/include/configs/bf525-ucr2.h +++ b/include/configs/bf525-ucr2.h @@ -67,7 +67,6 @@ /* support for serial flash */ #define CONFIG_BFIN_SPI -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_HZ 30000000 #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index e9d900e..74c3464 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf526-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -56,7 +53,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (512 * 1024) - /* * NAND Settings * (can't be used same time as ethernet) @@ -73,7 +69,6 @@ #define CONFIG_CMD_NAND #endif - /* * Network Settings */ @@ -96,7 +91,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 71 - /* * SPI Settings */ @@ -104,7 +98,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -122,14 +115,12 @@ #endif #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * USB Settings */ @@ -141,7 +132,6 @@ #define CONFIG_USB_MUSB_TIMEOUT 100000 #endif - /* * Misc Settings */ @@ -167,7 +157,6 @@ /* #define STATUS_LED_BIT2 GPIO_PG12 */ #endif - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index dd62e7e..258115a 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf527-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -55,7 +52,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (640 * 1024) - /* * NAND Settings * (can't be used same time as ethernet) @@ -71,7 +67,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif - /* * Flash Settings */ @@ -82,7 +77,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 259 - /* * SPI Settings */ @@ -90,7 +84,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -113,14 +106,12 @@ #define CONFIG_ENV_IS_EMBEDDED_IN_LDR #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * SPI_MMC Settings */ @@ -128,7 +119,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SPI - /* * Misc Settings */ diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 44de44f..e268473 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf527-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 4 - /* * Memory Settings */ @@ -55,7 +52,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (640 * 1024) - /* * NAND Settings * (can't be used same time as ethernet) @@ -71,7 +67,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif - /* * Network Settings */ @@ -94,7 +89,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 259 - /* * SPI Settings */ @@ -102,7 +96,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -125,14 +118,12 @@ #define CONFIG_ENV_IS_EMBEDDED_IN_LDR #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * USB Settings */ diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 6b51201..6b7d19e 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf527-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -42,7 +40,6 @@ #define CONFIG_PLL_CTL_VAL 0x2a00 #define CONFIG_VR_CTL_VAL 0x7090 - /* * Memory Settings */ @@ -59,7 +56,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (640 * 1024) - /* * Flash Settings */ @@ -70,7 +66,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 259 - /* * SPI Settings */ @@ -79,7 +74,6 @@ #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_SPI_FLASH_ALL - /* * Env Storage Settings */ @@ -98,14 +92,12 @@ #define CONFIG_ENV_IS_EMBEDDED_IN_LDR #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * Misc Settings */ diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 9581101..e154812 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf533-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -60,7 +57,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -76,7 +72,6 @@ } while (0) #define CONFIG_HOSTNAME bf533-ezkit - /* * Flash Settings */ @@ -88,7 +83,6 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #define FLASH_TOT_SECT 40 - /* * I2C Settings */ diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index c8c48ae..c2466ca 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -7,7 +7,6 @@ #include <asm/config-pre.h> - /* * Processor Settings */ @@ -53,7 +52,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) - /* * Network Settings */ @@ -69,7 +67,6 @@ } while (0) #define CONFIG_HOSTNAME bf533-stamp - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ @@ -134,7 +131,6 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ @@ -177,7 +173,6 @@ #define CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2 #endif - /* * Misc Settings */ @@ -211,7 +206,6 @@ /* define to enable splash screen support */ /* #define CONFIG_VIDEO */ - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index be474ad..43a9032 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -20,14 +20,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -51,7 +49,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -68,7 +65,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) #define CONFIG_SYS_MALLOC_LEN (128 << 10) - /* * Network Settings */ @@ -87,14 +83,12 @@ #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/romfs" - /* * Flash Settings */ /* We don't have a parallel flash chip there */ #define CONFIG_SYS_NO_FLASH - /* * SPI Settings */ @@ -102,7 +96,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -112,7 +105,6 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C settings */ @@ -121,7 +113,6 @@ #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0 - /* * Misc Settings */ @@ -144,16 +135,8 @@ # define CONFIG_BOOTDELAY 5 #endif -#ifdef CONFIG_BFIN_MAC -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_PING -#endif - #define CONFIG_CMD_BOOTLDR -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_SF #define CONFIG_BOOTCOMMAND "run ramboot" #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 5794f47..bced1df 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 4 - /* * Memory Settings */ @@ -55,7 +52,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -75,7 +71,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 71 - /* * SPI Settings */ @@ -83,7 +78,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -112,7 +106,6 @@ common/env_embedded.o (.text*); #endif - /* * NAND Settings */ @@ -133,14 +126,12 @@ #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) #define NAND_PLAT_GPIO_DEV_READY GPIO_PF12 - /* * I2C settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * Misc Settings */ @@ -157,7 +148,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTARGS_ROOT "/dev/mtdblock1 rw rootfstype=yaffs" - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 6d4a93b..7055366 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -20,14 +20,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -51,7 +49,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -68,7 +65,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) #define CONFIG_SYS_MALLOC_LEN (384 << 10) - /* * Network Settings */ @@ -93,7 +89,6 @@ /* We don't have a parallel flash chip there */ #define CONFIG_SYS_NO_FLASH - /* * SPI Settings */ @@ -101,7 +96,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -111,7 +105,6 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C settings */ @@ -120,7 +113,6 @@ #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0 - /* * Misc Settings */ @@ -144,15 +136,10 @@ #endif #ifdef CONFIG_BFIN_MAC -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_PING #endif #define CONFIG_CMD_BOOTLDR -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_SF #define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index b178713..4f861aa 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 4 - /* * Memory Settings */ @@ -55,7 +52,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) - /* * Network Settings */ @@ -77,7 +73,6 @@ /* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */ #define CONFIG_SYS_MAX_FLASH_SECT 71 - /* * SPI Settings */ @@ -86,7 +81,6 @@ #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_SPI_FLASH_ALL - /* * Env Storage Settings */ @@ -120,14 +114,12 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * SPI_MMC Settings */ @@ -243,7 +235,6 @@ #endif - /* * Misc Settings */ @@ -270,7 +261,6 @@ #define CONFIG_BOOTCOMMAND "bootldr 0x203f0100" #endif - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 55becdc..a6d039c 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf538-0.4 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 4 - /* * Memory Settings */ @@ -55,7 +52,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) - /* * Network Settings */ @@ -64,7 +60,6 @@ #define CONFIG_SMC91111_BASE 0x20310300 #define CONFIG_HOSTNAME bf538f-ezkit - /* * Flash Settings */ @@ -75,7 +70,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 71 - /* * SPI Settings */ @@ -119,14 +113,12 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * Misc Settings */ diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 8198cb8..6830e4d 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf548-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 4 - /* * Memory Settings */ @@ -64,7 +61,6 @@ #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) #define CONFIG_SYS_MALLOC_LEN (768 * 1024) - /* * Network Settings */ @@ -74,7 +70,6 @@ #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME bf548-ezkit - /* * Flash Settings */ @@ -85,7 +80,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 259 - /* * SPI Settings */ @@ -93,7 +87,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -133,7 +126,6 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * SATA */ @@ -146,7 +138,6 @@ #define CONFIG_BFIN_ATA_MODE XFER_PIO_4 #endif - /* * SDH Settings */ @@ -156,7 +147,6 @@ #define CONFIG_BFIN_SDH #endif - /* * USB Settings */ @@ -168,7 +158,6 @@ #define CONFIG_USB_MUSB_TIMEOUT 100000 #endif - /* * Misc Settings */ @@ -199,7 +188,6 @@ #define CONFIG_SYS_POST_FLASH_END 127 #endif - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 31862da..76b891b 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -8,14 +8,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf561-0.5 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -39,7 +37,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -56,7 +53,6 @@ #define CONFIG_SYS_MONITOR_LEN (384 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * RTC Settings */ @@ -71,12 +67,10 @@ #define CONFIG_SYS_DTT_LOW_TEMP -30 #define CONFIG_SYS_DTT_HYSTERESIS 3*/ - /* * Network Settings */ #define ADI_CMDS_NETWORK 1 -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_DTT @@ -91,13 +85,11 @@ #define CONFIG_HOSTNAME bf561-acvilon - /* * Flash Settings */ #define CONFIG_SYS_NO_FLASH - /* * I2C Settings */ @@ -107,7 +99,6 @@ #define CONFIG_PCA9564_I2C #define CONFIG_PCA9564_BASE 0x2c000000 - /* * SPI Settings */ @@ -115,7 +106,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 10000000 #define CONFIG_SF_DEFAULT_SPEED 10000000 - /* * Env Storage Settings */ @@ -124,7 +114,6 @@ #define CONFIG_ENV_OFFSET ((16 + 256) * 1056) #define CONFIG_ENV_SIZE (8 * 1056) - /* * NAND Settings * We're using NAND_PLAT driver to make things simplier @@ -146,7 +135,6 @@ #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) #define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 - /* * Misc Settings */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 1a3b33f..2fefe98 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf561-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 6 - /* * Memory Settings */ @@ -55,7 +52,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -65,7 +61,6 @@ #define CONFIG_SMC_USE_32_BIT 1 #define CONFIG_HOSTNAME bf561-ezkit - /* * Flash Settings */ @@ -82,7 +77,6 @@ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_SECT_SIZE 0x2000 - /* * I2C Settings */ @@ -106,7 +100,6 @@ */ /* #define CONFIG_CORE1_RUN 1 */ - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 3e0bff5..4deb2d2 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -13,7 +13,6 @@ #define CONFIG_BFIN_CPU bf609-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* For ez-board version 1.0, else undef this */ #define CONFIG_BFIN_BOARD_VERSION_1_0 @@ -73,7 +72,6 @@ #define CONFIG_PHY_ADDR 1 #define CONFIG_DW_PORTS 1 #define CONFIG_DW_ALTDESCRIPTOR -#define CONFIG_CMD_MII #define CONFIG_MII /* i2c Settings */ diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 9c537e0..88d2ae9 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -10,28 +10,20 @@ */ #ifndef _CONFIG_CMD_DEFAULT_H # ifdef ADI_CMDS_NETWORK -# define CONFIG_CMD_DHCP # define CONFIG_BOOTP_SUBNETMASK # define CONFIG_BOOTP_GATEWAY # define CONFIG_BOOTP_DNS # define CONFIG_BOOTP_NTPSERVER # define CONFIG_BOOTP_RANDOM_DELAY # define CONFIG_KEEP_SERVERADDR -# define CONFIG_CMD_DNS -# define CONFIG_CMD_PING # ifdef CONFIG_BFIN_MAC -# define CONFIG_CMD_MII # endif # endif # ifdef CONFIG_LIBATA -# define CONFIG_CMD_FAT # define CONFIG_CMD_SATA # define CONFIG_DOS_PARTITION # endif # ifdef CONFIG_MMC -# define CONFIG_CMD_EXT2 -# define CONFIG_CMD_FAT -# define CONFIG_CMD_MMC # define CONFIG_DOS_PARTITION # define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 # endif @@ -39,9 +31,6 @@ # define CONFIG_CMD_MMC_SPI # endif # ifdef CONFIG_USB -# define CONFIG_CMD_EXT2 -# define CONFIG_CMD_FAT -# define CONFIG_CMD_USB # define CONFIG_CMD_USB_STORAGE # define CONFIG_DOS_PARTITION # endif @@ -55,20 +44,12 @@ # ifdef CONFIG_RTC_BFIN # define CONFIG_CMD_DATE # ifdef ADI_CMDS_NETWORK -# define CONFIG_CMD_SNTP # endif # endif # ifdef CONFIG_SPI # define CONFIG_CMD_EEPROM # endif -# if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI) -# define CONFIG_CMD_SPI -# endif -# ifdef CONFIG_SPI_FLASH -# define CONFIG_CMD_SF -# endif # if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT) -# define CONFIG_CMD_I2C # define CONFIG_SOFT_I2C_READ_REPEATED_START # endif # ifndef CONFIG_SYS_NO_FLASH @@ -78,7 +59,6 @@ # define CONFIG_JFFS2_SUMMARY # endif # define CONFIG_CMD_BOOTLDR -# define CONFIG_CMD_CACHE # define CONFIG_CMD_CPLBINFO # define CONFIG_CMD_KGDB # define CONFIG_CMD_LDRINFO diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h index 05c932f..6a5bc12 100644 --- a/include/configs/bg0900.h +++ b/include/configs/bg0900.h @@ -14,15 +14,8 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index b9e859c..6eb83a0 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -102,21 +102,9 @@ #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_ENV_OVERWRITE 1 -#ifdef CONFIG_SMC91111 -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_PING -#else -#endif - -#ifdef CONFIG_SYS_I2C_SOFT -# define CONFIG_CMD_I2C -#endif - #define CONFIG_CMD_BOOTLDR -#define CONFIG_CMD_CACHE #define CONFIG_CMD_CPLBINFO #define CONFIG_CMD_DATE -#define CONFIG_CMD_SF #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTCOMMAND "run ramboot" diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index a262e79..ba90830 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -74,7 +74,6 @@ */ #define CONFIG_DRIVER_AX88180 1 #define AX88180_BASE 0x2c000000 -#define CONFIG_CMD_MII /* enable probing PHY */ #define CONFIG_HOSTNAME blackvme /* Bfin board */ #define CONFIG_IPADDR 169.254.144.145 /* Bfin board */ @@ -83,8 +82,6 @@ #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_ROOTPATH "/export/uClinux-dist/romfs" /*NFS*/ #define CFG_AUTOLOAD "no" -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING /* * SDRAM settings & memory map @@ -152,9 +149,7 @@ #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_CMD_BOOTLDR -#define CONFIG_CMD_CACHE #define CONFIG_CMD_CPLBINFO -#define CONFIG_CMD_SF /* * Default: boot from SPI flash. @@ -218,7 +213,6 @@ * PF12,13 on SPI connector 0. */ #ifdef CONFIG_SYS_I2C_SOFT -# define CONFIG_CMD_I2C # define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF12 # define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF13 # define CONFIG_SYS_I2C_SPEED 50000 diff --git a/include/configs/br4.h b/include/configs/br4.h index 85f31a4..402f352 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -10,14 +10,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -58,7 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) - /* * Network Settings */ @@ -75,7 +71,6 @@ */ #define CONFIG_SYS_NO_FLASH /* We have no parallel FLASH */ - /* * SPI Settings */ @@ -83,7 +78,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -93,14 +87,12 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * NAND Settings */ diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index ea7b104..51d4624 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -95,7 +95,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP #define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */ diff --git a/include/configs/calimain.h b/include/configs/calimain.h index e6b2d4d..506ad88 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -200,7 +200,6 @@ #define CONFIG_LOADADDR 0xc0700000 #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY @@ -309,17 +308,10 @@ * U-Boot commands */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING #endif /* additions for new relocation code, must added to all boards */ diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 2a6c09f..31fe5f6 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -37,7 +37,6 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - /* * BOOTP options */ @@ -46,18 +45,12 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP - /* * MUST be low boot - HIGHBOOT is not supported anymore @@ -140,7 +133,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index e136824..e68e342 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -382,21 +382,16 @@ #elif defined(CONFIG_CANYONLANDS) #define CONFIG_CMD_DATE #define CONFIG_CMD_DTT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SATA #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB #elif defined(CONFIG_GLACIER) #define CONFIG_CMD_DATE #define CONFIG_CMD_DTT #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP #else #error "board type not defined" #endif diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index acfe968..7107b72 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -29,13 +29,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -47,15 +45,12 @@ #define CONFIG_TEGRA_SLINK_CTRLS 6 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER @@ -67,7 +62,6 @@ #define CONFIG_CMD_PCI /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-post.h" diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 63e3b94..dd03936 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* SPI NOR */ -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_SST @@ -57,7 +56,6 @@ #define CONFIG_IMX_THERMAL /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -72,8 +70,6 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 /* USB Configs */ -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -86,21 +82,11 @@ #define CONFIG_USB_KEYBOARD #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP -#define CONFIG_CI_UDC #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 -#define CONFIG_G_DNL_MANUFACTURER "Congatec" /* USB Device Firmware Update support */ -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_DFU_SF @@ -141,9 +127,6 @@ #define CONFIG_LIBATA /* Ethernet */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR diff --git a/include/configs/charon.h b/include/configs/charon.h index 2f537e0..578c108 100644 --- a/include/configs/charon.h +++ b/include/configs/charon.h @@ -34,7 +34,6 @@ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" - /* additional features on charon board */ #define CONFIG_RESET_PHY_R diff --git a/include/configs/chromebook_jerry.h b/include/configs/chromebook_jerry.h index 67f45c0..d1f5b46 100644 --- a/include/configs/chromebook_jerry.h +++ b/include/configs/chromebook_jerry.h @@ -21,7 +21,6 @@ #define CONFIG_SPI_FLASH_GIGADEVICE #define CONFIG_CMD_SF_TEST -#define CONFIG_CMD_TIME #undef CONFIG_SPL_GPIO_SUPPORT diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index f0de827..ffaeedb 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -25,22 +25,8 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TFTPPUT -#define CONFIG_CMD_TIME /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 761e2c5..0b31dc9 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf527-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Decrease core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_120 | CLKBUFOE | FREQ_1000) - /* * Memory Settings */ @@ -58,7 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * NAND Settings * (can't be used sametime as ethernet) @@ -71,7 +67,6 @@ #define CONFIG_CMD_NAND #endif - /* * Network Settings */ @@ -95,7 +90,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 67 - /* * Env Storage Settings */ @@ -106,14 +100,12 @@ #define CONFIG_ENV_SECT_SIZE 0x8000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * Misc Settings */ diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index d06333d..7039cba 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf533-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Decrease core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000) - /* * Memory Settings */ @@ -58,7 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -67,7 +63,6 @@ #define CONFIG_SMC91111_BASE 0x20200300 #define CONFIG_HOSTNAME cm-bf533 - /* * Flash Settings */ @@ -78,7 +73,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 16 - /* * Env Storage Settings */ @@ -87,7 +81,6 @@ #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x10000 - /* * Misc Settings */ diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 746a5bd..78841cd 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Decrease core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000) - /* * Memory Settings */ @@ -58,7 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -83,14 +79,12 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 35 - /* * SPI Settings */ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 - /* * Env Storage Settings */ @@ -115,14 +109,12 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * SPI_MMC Settings */ @@ -130,7 +122,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SPI - /* * Misc Settings */ diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 71008aa..5785ebd 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -40,7 +38,6 @@ /* Core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) - /* * Memory Settings */ @@ -57,7 +54,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -81,14 +77,12 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 35 - /* * SPI Settings */ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 - /* * Env Storage Settings */ @@ -113,14 +107,12 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * SPI_MMC Settings */ diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 37205a9..d1aa262 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf548-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Decrease core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000) - /* * Memory Settings */ @@ -67,7 +64,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (640 * 1024) - /* * Network Settings */ @@ -77,7 +73,6 @@ #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME cm-bf548 - /* * Flash Settings */ @@ -88,7 +83,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 259 - /* * Env Storage Settings */ @@ -98,14 +92,12 @@ #define CONFIG_ENV_SIZE 0x8000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * Misc Settings */ @@ -134,7 +126,6 @@ #define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ #endif - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 284ec83..3860e0e 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf561-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Decrease core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) - /* * Memory Settings */ @@ -58,7 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -68,7 +64,6 @@ #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME cm-bf561 - /* * Flash Settings */ @@ -79,7 +74,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 67 - /* * Env Storage Settings */ @@ -89,7 +83,6 @@ #define CONFIG_ENV_SIZE 0x10000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * Misc Settings */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 3744af2..99182f4 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -8,10 +8,8 @@ #ifndef __CONFIG_H #define __CONFIG_H - #define CONFIG_DISPLAY_BOARDINFO - /* * High Level Configuration Options */ @@ -25,19 +23,11 @@ /* * Supported commands */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BSP #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB /* * Serial console configuration @@ -172,13 +162,11 @@ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ - #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT 1 #undef CONFIG_SYS_LOWBOOT #endif - /* * Chip selects configuration */ @@ -292,8 +280,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ -#define CONFIG_LOOPW 1 - #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ /* diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index b36ba14..9a12552 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -18,7 +18,6 @@ #define CONFIG_MACH_TYPE 4273 /* CMD */ -#define CONFIG_CMD_GREPENV /* MMC */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index adf05b1..c4f1d4f 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -19,7 +19,6 @@ #undef CONFIG_BOARD_LATE_INIT #undef CONFIG_SPI #undef CONFIG_OMAP3_SPI -#undef CONFIG_CMD_SPI #undef CONFIG_SPL_OS_BOOT #undef CONFIG_BOOTCOUNT_LIMIT #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC @@ -64,7 +63,6 @@ "nboot ${loadaddr} nand0 900000; " \ "bootm ${loadaddr}\0" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=82000000\0" \ "console=ttyO0,115200n8\0" \ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 3910b46..5d58116 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -99,7 +99,6 @@ #define CONFIG_USB_STORAGE #define CONFIG_USB_MUSB_UDC #define CONFIG_TWL4030_USB -#define CONFIG_CMD_USB /* USB device configuration */ #define CONFIG_USB_DEVICE @@ -107,9 +106,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS @@ -118,12 +114,7 @@ "1920k(u-boot),256k(u-boot-env),"\ "4m(kernel),-(fs)" -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C @@ -196,7 +187,6 @@ "nand read ${loadaddr} 2a0000 400000; " \ "bootm ${loadaddr}\0" \ -#define CONFIG_CMD_BOOTZ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ @@ -217,7 +207,6 @@ #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index d8a29f0..7cedb67 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -113,17 +113,12 @@ #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 #else /* !CONFIG_USB_MUSB_AM35X */ -#define CONFIG_USB_MUSB_HOST #define CONFIG_USB_MUSB_PIO_ONLY #endif /* CONFIG_USB_MUSB_AM35X */ #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS @@ -132,12 +127,7 @@ "1920k(u-boot),256k(u-boot-env),"\ "4m(kernel),-(fs)" -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C @@ -205,7 +195,6 @@ "nand read ${loadaddr} 2a0000 400000; " \ "bootm ${loadaddr}\0" \ -#define CONFIG_CMD_BOOTZ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ @@ -226,7 +215,6 @@ #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 1c1951c..ee818ed 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -101,7 +101,6 @@ #undef CONFIG_SYS_MONITOR_LEN #undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR #define CONFIG_ZERO_BOOTDELAY_CHECK -#undef CONFIG_CMD_IMLS #define CONFIG_ENV_SIZE (16 * 1024) #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -155,7 +154,6 @@ "run emmcboot; " \ "fi;" - #define CONFIG_CONS_INDEX 1 /* SPL defines. */ diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index c8c67c4..9b13aa6 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) /* USB UHH support options */ -#define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP @@ -81,8 +80,6 @@ #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 83 /* HSIC3 ETH #RESET */ /* Enabled commands */ -#define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_PING /* USB Networking options */ #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 67a143f..509c8b42 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -116,13 +116,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING - -#undef CONFIG_CMD_MII #ifdef CONFIG_MCFFEC # define CONFIG_MII 1 @@ -158,7 +154,6 @@ seconds u-boot will wait before starting defined (auto-)boot command, setting to -1 disables delay, setting to 0 will too prevent access to u-boot command interface: u-boot then has to reflashed */ - /* The following settings will be contained in the environment block ; if you want to use a neutral environment all those settings can be manually set in u-boot: 'set' command */ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index e8851e7..5dffc9e 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -54,12 +54,9 @@ * Bootloader Components Configuration */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB /* I2C support */ #ifdef CONFIG_SYS_I2C -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_PXA #define CONFIG_PXA_STD_I2C #define CONFIG_PXA_PWR_I2C @@ -80,8 +77,6 @@ * Networking Configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_DRIVER_DM9000 1 #define CONFIG_DM9000_BASE 0x08000000 @@ -95,17 +90,7 @@ #define CONFIG_BOOTP_HOSTNAME #endif -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - #undef CONFIG_SYS_LONGHELP /* Saves 10 KB */ -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " -#else -#endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index e97e5a1..c15f0cb 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -25,27 +25,23 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC support */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #define CONFIG_IP_DEFRAG #define CONFIG_TFTP_BLOCKSIZE 1536 #define CONFIG_TFTP_TSIZE @@ -79,7 +75,6 @@ #define CONFIG_ENV_SIZE (SZ_64K) /* UBI */ -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ #define CONFIG_LZO @@ -87,7 +82,6 @@ #define CONFIG_RBTREE /* Debug commands */ -#define CONFIG_CMD_CACHE /* Miscellaneous commands */ #define CONFIG_FAT_WRITE diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index 47914c7..7e98166 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -26,13 +26,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC support */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -44,14 +42,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #define CONFIG_IP_DEFRAG #define CONFIG_TFTP_BLOCKSIZE 16384 #define CONFIG_TFTP_TSIZE diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 7f57a54..50f7c21 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -43,7 +43,6 @@ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_VERSION_VARIABLE #define CONFIG_BAUDRATE 115200 -#define CONFIG_CMD_ASKENV /* NAND support */ #define CONFIG_CMD_NAND @@ -69,24 +68,15 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT3 -#define CONFIG_CMD_EXT4 #define CONFIG_DOS_PARTITION #define CONFIG_RBTREE #define CONFIG_LZO -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_UBI #define CONFIG_MTD_UBI_FASTMAP #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET1_BASE_ADDR @@ -167,8 +157,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #undef CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ @@ -176,7 +164,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80010000 #define CONFIG_SYS_MEMTEST_END 0x87C00000 @@ -219,35 +206,24 @@ #define CONFIG_ENV_OFFSET (12 * 64 * 2048) #endif -#define CONFIG_CMD_BOOTZ - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_CACHELINE_SIZE 32 /* USB Host Support */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_VF #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* USB Client Support */ -#define CONFIG_CI_UDC -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_TRDX_VID 0x1B67 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 -#define CONFIG_G_DNL_MANUFACTURER "Toradex" -#define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID -#define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50 /* USB DFU */ -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_DFU_MMC @@ -256,6 +232,5 @@ /* USB Storage */ #define CONFIG_USB_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_CMD_USB_MASS_STORAGE #endif /* __CONFIG_H */ diff --git a/include/configs/conga-qeval20-qa3-e3845.h b/include/configs/conga-qeval20-qa3-e3845.h index 556d44e..4c37d5e 100644 --- a/include/configs/conga-qeval20-qa3-e3845.h +++ b/include/configs/conga-qeval20-qa3-e3845.h @@ -32,7 +32,6 @@ #define CONFIG_SDHCI #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SDMA -#define CONFIG_CMD_MMC #undef CONFIG_USB_MAX_CONTROLLER_COUNT #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index fa64a1e..1bb8d93 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -45,7 +45,6 @@ #define CONFIG_CONTROLCENTERD #define CONFIG_MP /* support multiple processors */ - #define CONFIG_SYS_NO_FLASH #define CONFIG_ENABLE_36BIT_PHYS #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -98,7 +97,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - /* * Memory map * @@ -201,7 +199,6 @@ #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 #ifndef CONFIG_TRAILBLAZER -#define CONFIG_CMD_I2C #endif #define CONFIG_PCA9698 /* NXP PCA9698 */ @@ -216,8 +213,6 @@ */ #define CONFIG_HARD_SPI - -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 #endif @@ -229,12 +224,10 @@ */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR - #ifndef CONFIG_TRAILBLAZER /* @@ -326,7 +319,6 @@ * USB */ #define CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_HAS_FSL_DR_USB @@ -365,7 +357,6 @@ * Command line configuration. */ #ifndef CONFIG_TRAILBLAZER -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ @@ -385,11 +376,7 @@ #ifndef CONFIG_TRAILBLAZER #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index d30d7ff..96f17d3 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -341,9 +341,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -405,7 +402,6 @@ /* * eSPI - Enhanced SPI */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -583,7 +579,6 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_FMAN_ENET @@ -614,13 +609,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -634,22 +624,17 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/corvus.h b/include/configs/corvus.h index fcf2bd6..8b3c715 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -39,8 +39,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -69,10 +67,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -117,23 +112,12 @@ #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA - /* DFU class support */ -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 -/* USB DFU IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0908 -#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 -#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" - #define CONFIG_SYS_CACHELINE_SIZE SZ_8K #define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6 @@ -162,7 +146,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h index fc1a8ba..49ed3ef 100644 --- a/include/configs/crownbay.h +++ b/include/configs/crownbay.h @@ -28,12 +28,10 @@ #define CONFIG_SCSI_DEV_LIST \ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA} - #define CONFIG_MMC #define CONFIG_SDHCI #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SDMA -#define CONFIG_CMD_MMC /* Environment configuration */ #define CONFIG_ENV_SECT_SIZE 0x1000 diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index b4bf350..4280c9c 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -17,7 +17,6 @@ #error Must call Cyrus CONFIG with a specific CPU enabled. #endif - #define CONFIG_MMC #define CONFIG_SDCARD #define CONFIG_FSL_SATA_V2 @@ -43,7 +42,6 @@ #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg #endif - /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ @@ -51,7 +49,6 @@ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MP /* support multiple processors */ - #define CONFIG_SYS_MMC_MAX_DEVICE 1 #ifndef CONFIG_SYS_TEXT_BASE @@ -173,7 +170,6 @@ #define CONFIG_SYS_OR0_PRELIM 0xfff00010 #define CONFIG_SYS_OR1_PRELIM 0xfff00010 - #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #if defined(CONFIG_RAMBOOT_PBL) @@ -227,10 +223,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -421,7 +413,6 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_FMAN_ENET @@ -440,13 +431,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -460,12 +446,10 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_KEYBOARD #define CONFIG_SYS_STDIO_DEREGISTER @@ -479,10 +463,7 @@ #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -493,7 +474,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 24e55e8..af220fe 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -20,7 +20,6 @@ #define CONFIG_USE_SPIFLASH #endif - /* * SoC Configuration */ @@ -141,7 +140,6 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SPI -#define CONFIG_CMD_SF #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) @@ -265,7 +263,6 @@ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY @@ -288,11 +285,7 @@ * U-Boot commands */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI @@ -300,9 +293,6 @@ #endif #ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING #endif #ifdef CONFIG_USE_NAND @@ -318,7 +308,6 @@ #endif #ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI #endif #if !defined(CONFIG_USE_NAND) && \ @@ -344,9 +333,6 @@ */ #ifdef CONFIG_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC #endif #ifndef CONFIG_DIRECT_NOR_BOOT diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index f74ced1b..82b1f2c 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -22,13 +22,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -41,22 +39,18 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index 7f19334..01c7895 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -24,19 +24,7 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TFTPPUT -#define CONFIG_CMD_TIME /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index ef14132..d84dde3 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -25,22 +25,9 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_SCSI -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TFTPPUT -#define CONFIG_CMD_TIME /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index c8b0344..d6acbbc 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -26,22 +26,10 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_I2C #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_SATA -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TFTPPUT -#define CONFIG_CMD_TIME /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 817676f..eb0a87c 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -61,7 +61,6 @@ #define CONFIG_BOOTCOMMAND "bootp;bootm" #endif /* CONFIG_DBAU1550 */ - /* * BOOTP options */ @@ -70,28 +69,22 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_MII #ifdef CONFIG_DBAU1550 -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_IDE #undef CONFIG_CMD_PCMCIA #else #define CONFIG_CMD_IDE -#define CONFIG_CMD_DHCP #endif - /* * Miscellaneous configurable options */ @@ -174,7 +167,6 @@ #define CONFIG_NR_DRAM_BANKS 2 - #ifdef CONFIG_DBAU1550 #define MEM_SIZE 192 #else diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index a8ce7e1..913b948 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -61,7 +61,6 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_LPC32XX #define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_CMD_I2C /* * GPIO @@ -73,7 +72,6 @@ */ #define CONFIG_LPC32XX_SSP #define CONFIG_LPC32XX_SSP_TIMEOUT 100000 -#define CONFIG_CMD_SPI /* * Ethernet @@ -84,9 +82,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ADDR 0x1F #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP /* * NOR Flash @@ -130,8 +125,6 @@ #define CONFIG_USB_OHCI_LPC32XX #define CONFIG_USB_ISP1301_I2C_ADDR 0x2d #define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB /* * U-Boot General Configurations @@ -179,7 +172,6 @@ /* * U-Boot Commands */ -#define CONFIG_CMD_CACHE /* * Boot Linux diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index b8975fa..5112ef3 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -96,17 +96,11 @@ /* partition */ /* commands to include */ -#define CONFIG_CMD_DHCP /* DHCP support */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BOOTZ #undef CONFIG_SUPPORT_RAW_INITRD #undef CONFIG_FAT_WRITE -#undef CONFIG_CMD_EXT4 -#undef CONFIG_CMD_FS_GENERIC /* BOOTP/DHCP options */ #define CONFIG_BOOTP_SUBNETMASK @@ -187,7 +181,6 @@ "fi; " \ "else run nandboot; fi\0" - #define CONFIG_BOOTCOMMAND "run autoboot" /* Boot Argument Buffer Size */ diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index 0041ab9..18804d4 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -101,23 +101,14 @@ #ifdef CONFIG_VIDEO #define CONFIG_CMD_BMP #endif -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SAVES -#define CONFIG_CMD_SPI -#define CONFIG_CMD_USB #if (CONFIG_SYS_TEXT_BASE == 0xFF000000) #define CONFIG_SYS_LOWBOOT 1 @@ -387,9 +378,7 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_LOOPW 1 #define CONFIG_MX_CYCLIC 1 #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index bbeed76..445a346 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -62,10 +62,8 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_DTT -#undef CONFIG_CMD_DHCP #undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ /* diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 1e461f5..4dda319 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -58,10 +58,8 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_DTT -#undef CONFIG_CMD_DHCP #undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ /* diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h index c46e60d..0a7bc8a 100644 --- a/include/configs/dnp5370.h +++ b/include/configs/dnp5370.h @@ -53,9 +53,6 @@ #define CONFIG_PHY_ADDR 0 #define CONFIG_RMII 1 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - #endif /* diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 80f7a1e..7ee274e 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -31,11 +31,8 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_IDE #define CONFIG_CMD_DATE #define CONFIG_SYS_MVFS @@ -49,7 +46,6 @@ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ -#undef CONFIG_SYS_PROMPT /* * Ethernet Driver configuration @@ -80,11 +76,6 @@ #define CONFIG_KIRKWOOD_GPIO /* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* * Console configuration */ #define CONFIG_CONSOLE_MUX diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index efe5807..cd05857 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -12,7 +12,6 @@ #ifndef _CONFIG_DOCKSTAR_H #define _CONFIG_DOCKSTAR_H - /* * Version number information */ @@ -30,12 +29,8 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -91,8 +86,6 @@ /* * File system */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 7734e8d..79b6c09 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -142,15 +142,12 @@ #define CONFIG_HSMMC2_8BIT /* CPSW Ethernet */ -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ #define CONFIG_PHY_GIGE /* per-board part of CPSW */ @@ -159,8 +156,6 @@ /* SPI */ #undef CONFIG_OMAP3_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 64000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 @@ -215,7 +210,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* USB xHCI HOST */ -#define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_DWC3 @@ -226,23 +220,9 @@ #define CONFIG_OMAP_USB_PHY #define CONFIG_OMAP_USB2PHY2_HOST -/* USB GADGET */ -#define CONFIG_USB_DWC3_PHY_OMAP -#define CONFIG_USB_DWC3_OMAP -#define CONFIG_USB_DWC3 -#define CONFIG_USB_DWC3_GADGET - -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" -#define CONFIG_G_DNL_VENDOR_NUM 0x0451 -#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 -#define CONFIG_USB_GADGET_DUALSPEED - /* USB Device Firmware Update support */ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_RAM -#define CONFIG_CMD_DFU #define CONFIG_DFU_MMC #define CONFIG_DFU_RAM diff --git a/include/configs/draco.h b/include/configs/draco.h index acefd3e..8aee25b 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -33,7 +33,6 @@ "led1=64,0,1\0" #undef CONFIG_DOS_PARTITION -#undef CONFIG_CMD_FAT #define CONFIG_BOARD_LATE_INIT @@ -67,7 +66,6 @@ #define CONFIG_ENV_SIZE_REDUND 0x2000 #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) - #define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 #ifndef CONFIG_SPL_BUILD @@ -95,7 +93,6 @@ "run nand_boot_backup;" \ "reset;" - #else #define CONFIG_BOOTDELAY 0 diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index a63440f..d32889d 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -27,6 +27,8 @@ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) #define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16MB max kernel size */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + /* UART */ #define CONFIG_BAUDRATE 115200 @@ -57,20 +59,15 @@ #define CONFIG_MD5 /* Extra Commands */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_ENV -#define CONFIG_CMD_GPIO #define CONFIG_CMD_GPT #define CONFIG_CMD_MD5SUM -#define CONFIG_CMD_MEMINFO -#define CONFIG_CMD_MMC /* Enable that for switching of boot partitions */ /* Disabled by default as some sub-commands can brick eMMC */ /*#define CONFIG_SUPPORT_EMMC_BOOT */ #define CONFIG_CMD_PART #define CONFIG_CMD_REGINFO /* Register dump */ #define CONFIG_CMD_TFTP -#define CONFIG_CMD_TIMER #define CONFIG_CMD_UNZIP /* Partition table support */ @@ -100,7 +97,6 @@ "tftp $loadaddr "#file" && " \ "mmc write $loadaddr $start $size && " - #define CONFIG_ENV_REFLASH \ "mmc dev 0 && "\ "usb start && "\ @@ -126,10 +122,10 @@ REFLASH(dragonboard/u-boot.img, 8)\ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "linux_image=Image\0" \ - "linux_addr=0x81000000\0"\ - "fdt_image=apq8016-sbc.dtb\0" \ - "fdt_addr=0x83000000\0"\ - "ramdisk_addr=0x84000000\0"\ + "kernel_addr_r=0x81000000\0"\ + "fdtfile=apq8016-sbc.dtb\0" \ + "fdt_addr_r=0x83000000\0"\ + "ramdisk_addr_r=0x84000000\0"\ BOOTENV #define CONFIG_ENV_IS_NOWHERE diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 0b7d89b..c78c949 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -39,8 +39,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT /* * mv-plug-common.h should be defined after CMD configs since it used them diff --git a/include/configs/ds414.h b/include/configs/ds414.h index e3c7087..64c546c 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -24,15 +24,7 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TFTPPUT -#define CONFIG_CMD_TIME -#define CONFIG_CMD_USB /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/duovero.h b/include/configs/duovero.h index bb3ba55..d8f48ef 100644 --- a/include/configs/duovero.h +++ b/include/configs/duovero.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS /* USB UHH support options */ -#define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP @@ -40,9 +39,6 @@ #define CONFIG_SYS_ENABLE_PADS_ALL -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - #define CONFIG_SMC911X #define CONFIG_SMC911X_32_BIT #define CONFIG_SMC911X_BASE 0x2C000000 diff --git a/include/configs/e2220-1170.h b/include/configs/e2220-1170.h index 33ebb7c..9de1179 100644 --- a/include/configs/e2220-1170.h +++ b/include/configs/e2220-1170.h @@ -20,13 +20,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -37,22 +35,18 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 10b30c1..d4f3cfa 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -24,7 +24,6 @@ #define CONFIG_VIDEO #define CONFIG_PREBOOT - /* * SoC Configuration */ @@ -102,7 +101,6 @@ #define CONFIG_SYS_NO_FLASH #endif - #if defined(CONFIG_VIDEO) #define CONFIG_VIDEO_DA8XX #define CONFIG_CFB_CONSOLE @@ -128,7 +126,6 @@ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY @@ -146,22 +143,14 @@ * U-Boot commands */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_I2C #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif #ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING #endif /* NAND Setup */ @@ -189,8 +178,6 @@ /* SPI Flash */ #ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #endif #if !defined(CONFIG_SYS_USE_NAND) && \ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index f9ec028..521e3cf 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -65,10 +65,7 @@ */ #define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C #define CONFIG_CMD_LED -#define CONFIG_CMD_MII #define CONFIG_MCFTMR diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h index f23d383..bb5d7e5 100644 --- a/include/configs/eco5pk.h +++ b/include/configs/eco5pk.h @@ -18,7 +18,6 @@ #undef CONFIG_USB_EHCI #undef CONFIG_USB_EHCI_OMAP #undef CONFIG_USB_OMAP3 -#undef CONFIG_CMD_USB /* Our console port is port3 */ #undef CONFIG_CONS_INDEX @@ -59,5 +58,4 @@ "mtdparts="MTDPARTS_DEFAULT"\0" \ "serverip=192.168.142.60\0" - #endif /* __CONFIG_H */ diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 8e62674..2ac7757 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -30,13 +30,8 @@ #define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_CMD_SDRAM #define CONFIG_CMD_ENV -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION @@ -49,7 +44,6 @@ #undef CONFIG_SHOW_BOOT_PROGRESS /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SH #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 7bc58dc..174cdf3 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -25,7 +25,6 @@ #error "no board defined" #endif - /* Initial environment and monitor configuration options. */ #define CONFIG_BOOTDELAY 2 #define CONFIG_CMDLINE_TAG 1 @@ -34,52 +33,39 @@ #define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp" #define CONFIG_BOOTFILE "edb93xx.img" -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - - #define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds" -#undef CONFIG_SYS_PROMPT #ifdef CONFIG_EDB9301 #define CONFIG_EP9301 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 -#define CONFIG_SYS_PROMPT "EDB9301> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9302) #define CONFIG_EP9302 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302 -#define CONFIG_SYS_PROMPT "EDB9302> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9302A) #define CONFIG_EP9302 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A -#define CONFIG_SYS_PROMPT "EDB9302A> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9307) #define CONFIG_EP9307 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307 -#define CONFIG_SYS_PROMPT "EDB9307> " #define CONFIG_ENV_SECT_SIZE 0x00040000 #elif defined(CONFIG_EDB9307A) #define CONFIG_EP9307 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A -#define CONFIG_SYS_PROMPT "EDB9307A> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9312) #define CONFIG_EP9312 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9312 -#define CONFIG_SYS_PROMPT "EDB9312> " #define CONFIG_ENV_SECT_SIZE 0x00040000 #elif defined(CONFIG_EDB9315) #define CONFIG_EP9315 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315 -#define CONFIG_SYS_PROMPT "EDB9315> " #define CONFIG_ENV_SECT_SIZE 0x00040000 #elif defined(CONFIG_EDB9315A) #define CONFIG_EP9315 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A -#define CONFIG_SYS_PROMPT "EDB9315A> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #else #error "no board defined" @@ -93,7 +79,6 @@ /* Monitor configuration */ #undef CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_JFFS2 #define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ @@ -172,7 +157,6 @@ #error "no SDCS configuration for this board" #endif - #if defined(CONFIG_EDB93XX_SDCS3) #define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */ #define PHYS_SDRAM_1 0x00000000 @@ -187,7 +171,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE) - /* Must match kernel config */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) @@ -226,7 +209,6 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_MAX_FLASH_BANKS 1 @@ -256,7 +238,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SPI -#define CONFIG_CMD_MMC #define CONFIG_MMC_SPI_NPOWER_EGPIO 9 #endif @@ -268,13 +249,7 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci" #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000 -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB - #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_CMD_BOOTZ /* Define to disable flash configuration*/ /* #define CONFIG_EP93XX_NO_FLASH_CFG */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 1dfa721..99d16b0 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -133,8 +133,6 @@ * Commands configuration */ #define CONFIG_CMD_IDE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_USB /* * Network @@ -159,7 +157,6 @@ #define __io #define CONFIG_IDE_PREINIT #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 /* ED Mini V has an IDE-compatible SATA connector for port 1 */ #define CONFIG_MVSATA_IDE #define CONFIG_MVSATA_IDE_USE_PORT1 @@ -235,9 +232,6 @@ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 #define CONFIG_SYS_MAXARGS 16 -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Enable command line editing */ #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 90cd959..59a06ba 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -30,7 +30,6 @@ #define CONFIG_MXC_UART /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -39,7 +38,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -63,7 +61,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 diff --git a/include/configs/espt.h b/include/configs/espt.h index 4896498..3d67376 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -18,8 +18,6 @@ * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_ENV #define CONFIG_BOOTDELAY -1 diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 23a2935..94fee54 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -12,7 +12,6 @@ #include <asm/hardware.h> - /* The first stage boot loader expects u-boot running at this address. */ #define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */ @@ -89,33 +88,17 @@ /* Command line configuration */ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND -#define CONFIG_CMD_SPI #ifndef MINIMAL_LOADER -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BSP -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DNS -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_RARP #define CONFIG_CMD_REISER #define CONFIG_CMD_SAVES -#define CONFIG_CMD_SF -#define CONFIG_CMD_SNTP #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_UNZIP -#define CONFIG_CMD_USB #endif /* NAND flash */ @@ -235,7 +218,6 @@ #endif /* Misc. u-boot settings */ -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index b61f889..98474d3 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -16,7 +16,6 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <linux/sizes.h> - #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -27,7 +26,6 @@ #define CONFIG_USE_ARCH_MEMSET /* Keep L2 Cache Disabled */ -#define CONFIG_CMD_CACHE /* input clock of PLL: 24MHz input clock */ #define CONFIG_SYS_CLK_FREQ 24000000 @@ -59,10 +57,7 @@ #define CONFIG_PWM /* Command definition*/ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT4_WRITE #define CONFIG_FAT_WRITE -#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_PART #define CONFIG_PARTITION_UUIDS diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 008d24c..fbe0fa9 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -24,12 +24,8 @@ #undef CONFIG_CMD_ONENAND #undef CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_DFU #define CONFIG_CMD_GPT -/* USB Composite download gadget - g_dnl */ -#define CONFIG_USB_GADGET_DOWNLOAD - /* TIZEN THOR downloader support */ #define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR @@ -40,22 +36,15 @@ #define DFU_DEFAULT_POLL_TIMEOUT 300 /* USB Samsung's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 -#define CONFIG_G_DNL_MANUFACTURER "Samsung" #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DWC2_OTG_PHY -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE /* Common environment variables */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 7d600bf..b2ff4dd 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -121,7 +121,6 @@ #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 @@ -129,8 +128,6 @@ /* SPI */ #ifdef CONFIG_SPI_FLASH -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 50000000 #endif @@ -157,11 +154,8 @@ #define CONFIG_SHA256 /* Enable Time Command */ -#define CONFIG_CMD_TIME - /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_XHCI_DWC3 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 3e4aaf6..7400870 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -73,25 +73,18 @@ /* * Command definition */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_DNS #define CONFIG_CMD_NAND -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_SPI -#define CONFIG_CMD_MII #define CONFIG_NET_RETRY_COUNT 100 #define CONFIG_BOOTDELAY 3 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ - /* * Ethernet on SOC (FEC) */ @@ -110,7 +103,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ @@ -250,7 +242,4 @@ "else echo U-Boot not downloaded..exiting;fi\0" \ "bootcmd=run net_nfs\0" -/* Enable FIT images support */ -#define CONFIG_CMD_FDT - #endif /* __CONFIG_H */ diff --git a/include/configs/galileo.h b/include/configs/galileo.h index 14a42b1..2f1f6d4 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -40,7 +40,6 @@ #define CONFIG_SDHCI #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SDMA -#define CONFIG_CMD_MMC /* 10/100M Ethernet support */ #define CONFIG_DESIGNWARE_ETH diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 6fa4a9a..1304879 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -73,16 +73,11 @@ #define CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* USB Configs */ -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -98,7 +93,6 @@ #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_GADGET_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_VBUS_DRAW 2 @@ -107,9 +101,6 @@ #define CONFIG_G_DNL_MANUFACTURER "Advantech" /* Networking Configs */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -120,7 +111,6 @@ #define CONFIG_PHY_ATHEROS /* Serial Flash */ -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 @@ -136,8 +126,6 @@ /* Command definition */ #define CONFIG_CMD_BMODE -#define CONFIG_CMD_BOOTZ -#undef CONFIG_CMD_IMLS #define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 @@ -260,8 +248,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE /* Print Buffer Size */ @@ -302,10 +288,7 @@ #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#define CONFIG_OF_LIBFDT - #ifndef CONFIG_SYS_DCACHE_OFF -#define CONFIG_CMD_CACHE #endif #define CONFIG_SYS_FSL_USDHC_NUM 3 @@ -327,6 +310,9 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_PWM_IMX +#define CONFIG_IMX6_PWM_PER_CLK 66000000 + #undef CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI @@ -338,7 +324,6 @@ #endif /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 188d2e2..ffbe660 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -15,7 +15,6 @@ #ifndef _CONFIG_GOFLEXHOME_H #define _CONFIG_GOFLEXHOME_H - /* * Version number information */ @@ -52,15 +51,10 @@ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_IDE #define CONFIG_CMD_DATE -#define CONFIG_CMD_EXT4 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ /* diff --git a/include/configs/gose.h b/include/configs/gose.h index 4e29825..230be31 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -96,7 +96,6 @@ /* SDHI */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_SH_SDHI_FREQ 97500000 diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 52c67d5..40ec030 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -52,21 +52,15 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_USB -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT /* Disable DCACHE */ #define CONFIG_SYS_DCACHE_OFF /* Network configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING #define CONFIG_ARMADA100_FEC /* DHCP Support */ -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 #endif /* CONFIG_CMD_NET */ @@ -75,7 +69,6 @@ /* PHY configuration */ #define CONFIG_MII -#define CONFIG_CMD_MII #define CONFIG_RESET_PHY_R /* 88E3015 register definition */ #define PHY_LED_PAR_SEL_REG 22 @@ -90,7 +83,6 @@ #define CONFIG_SYS_SSP_PORT 2 /* Flash Support */ -#define CONFIG_CMD_SF /* * mv-common.h should be defined after CMD configs since it used them @@ -113,8 +105,6 @@ #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_ENV_OFFSET 0x07C000 -#define CONFIG_CMD_ASKENV - #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ARMADA100 diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index c3b1729..f3361d0 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -60,7 +60,6 @@ * Supported commands */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_PING #define CONFIG_CMD_DIAG #define CONFIG_CMD_IRQ diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index 45163ed..94eb7ac 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -54,16 +54,12 @@ * Supported commands */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_PING #define CONFIG_CMD_DIAG #define CONFIG_CMD_IRQ /* USB support */ #if USE_GRUSB #define CONFIG_USB_UHCI -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE /* Enable needed helper functions */ #define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index f675b75..dcb72c9 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -41,7 +41,6 @@ * Supported commands */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_PING #define CONFIG_CMD_DIAG #define CONFIG_CMD_IRQ diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index 274175b..83f1d73 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -93,13 +93,9 @@ * Command line configuration. */ /* add useful commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 47c3573..3e81f0d 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -66,7 +66,6 @@ "echo" #undef CONFIG_BOOTARGS -/*#define CONFIG_SYS_HUSH_PARSER 0*/ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 0a5292e..ab1e11d 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -61,7 +61,6 @@ "echo" #undef CONFIG_BOOTARGS -/*#define CONFIG_SYS_HUSH_PARSER 0*/ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -190,7 +189,6 @@ #undef CONFIG_SYS_SRAM_BASE #undef CONFIG_SYS_SRAM_SIZE - /* Always Run U-Boot from SDRAM */ #define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 712bfd7..5907e98 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -10,7 +10,6 @@ #ifndef _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H - /* * Version number information */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 793b3fb..e11629c 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -65,7 +65,6 @@ #ifdef CONFIG_SPI_FLASH /* SPI */ -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_MXC_SPI #define CONFIG_SPI_FLASH_MTD @@ -79,7 +78,6 @@ #else /* Enable NAND support */ -#define CONFIG_CMD_TIME #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS #ifdef CONFIG_CMD_NAND @@ -98,7 +96,6 @@ #endif /* CONFIG_SPI_FLASH */ /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -152,9 +149,6 @@ #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c /* Various command support */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */ #define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */ #define CONFIG_CMD_GSC @@ -172,7 +166,6 @@ #define CONFIG_ARP_TIMEOUT 200UL /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -184,24 +177,14 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_KEYBOARD -#define CONFIG_CI_UDC #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_CDC #define CONFIG_NETCONSOLE #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP /* USB Mass Storage Gadget */ -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -/* Netchip IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 -#define CONFIG_G_DNL_MANUFACTURER "Gateworks" /* Framebuffer and LCD */ #define CONFIG_VIDEO diff --git a/include/configs/h2200.h b/include/configs/h2200.h index fe0211a..3d510d6 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -121,8 +121,6 @@ #define CONFIG_INITRD_TAG /* Monitor Command Prompt */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ " /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 @@ -137,8 +135,6 @@ #define CONFIG_USB_DEV_PULLUP_GPIO 33 /* USB VBUS GPIO 3 */ -#define CONFIG_CMD_PING - #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTCOMMAND \ "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 0a3cb18..d3ab10e 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -30,7 +30,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* NAND support */ #define CONFIG_CMD_NAND @@ -45,7 +44,6 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER @@ -54,7 +52,6 @@ #define CONFIG_USB_ETHER_SMSC95XX /* General networking support */ -#define CONFIG_CMD_DHCP /* LCD support */ #define CONFIG_SYS_WHITE_ON_BLACK diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 510741b..3bce12b 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x800000 #define CONFIG_SYS_64BIT_LBA - /*----------------------------------------------------------------------- * Physical Memory Map * The DRAM is already setup, so do not touch the DT node later. diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 0851626..83d9e10 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -33,7 +33,7 @@ /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ #define CONFIG_SYS_TEXT_BASE 0x35000000 -#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_NR_DRAM_BANKS 6 #define PHYS_SDRAM_1 0x00000000 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ @@ -61,7 +61,6 @@ #define CONFIG_PL01X_SERIAL #define CONFIG_BAUDRATE 115200 -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000 @@ -83,13 +82,11 @@ #define CONFIG_DWMMC #define CONFIG_HIKEY_DWMMC #define CONFIG_BOUNCE_BUFFER -#define CONFIG_CMD_MMC #define CONFIG_FS_EXT4 /* Command line configuration */ #define CONFIG_MENU -#define CONFIG_CMD_CACHE #define CONFIG_CMD_UNZIP #define CONFIG_CMD_ENV @@ -124,7 +121,6 @@ "initrd_high=0xffffffffffffffff\0" \ BOOTENV - /* Preserve enviroment on sd card */ #define CONFIG_COMMAND_HISTORY @@ -140,7 +136,6 @@ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index c984613..9f02a65 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -26,7 +26,6 @@ #define CONFIG_IDENT_STRING " hrcon 0.01" #endif - #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT @@ -36,10 +35,8 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_FPGAD #define CONFIG_CMD_IOLOOP @@ -310,9 +307,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Pass open firmware flat tree */ /* I2C */ @@ -537,10 +531,7 @@ void fpga_control_clear(unsigned int bus, int pin); /* * Command line configuration. */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ @@ -670,5 +661,4 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 57b1a43..ab23607 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -35,9 +35,7 @@ */ #define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_IDE -#define CONFIG_CMD_MII /* * mv-common.h should be defined after CMD configs since it used them diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 7cb2346..4cd0f77 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf561-0.5 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -56,7 +53,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -65,7 +61,6 @@ #define AX88180_BASE 0x2c000000 #define CONFIG_HOSTNAME ibf-dsp561 - /* * Flash Settings */ @@ -99,7 +94,6 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ @@ -113,7 +107,6 @@ */ #define CONFIG_UART_CONSOLE 0 - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/icon.h b/include/configs/icon.h index d9a3671..7e9e7e6 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -167,11 +167,8 @@ */ #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP #ifdef CONFIG_VIDEO #define CONFIG_CMD_BMP #endif diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index adf3703..f0d4250 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -9,7 +9,6 @@ #ifndef _CONFIG_ICONNECT_H #define _CONFIG_ICONNECT_H - /* * Version number information */ @@ -40,10 +39,7 @@ #define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS #define CONFIG_CMD_ENV -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB /* * mv-common.h should be defined after CMD configs since it used them @@ -98,8 +94,6 @@ /* * File system */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 5855d81..04515ba 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -19,7 +19,6 @@ #define CONFIG_MPC8313 #define CONFIG_IDS8313 - #define CONFIG_FSL_ELBC #define CONFIG_MISC_INIT_R @@ -277,7 +276,6 @@ /* * I2C setup */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000 @@ -291,7 +289,6 @@ */ #ifdef CONFIG_HARD_SPI #define CONFIG_MPC8XXX_SPI -#define CONFIG_CMD_SPI #define CONFIG_SYS_GPIO1_PRELIM #define CONFIG_SYS_GPIO1_DIR 0x00000001 #define CONFIG_SYS_GPIO1_DAT 0x00000001 @@ -416,11 +413,7 @@ /* * U-Boot environment setup */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_CMD_NAND -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_JFFS2 @@ -447,7 +440,6 @@ #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - #define CONFIG_NETDEV eth1 #define CONFIG_HOSTNAME ids8313 #define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx" @@ -472,8 +464,6 @@ + sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_MEMTEST_START 0x00001000 #define CONFIG_SYS_MEMTEST_END 0x00C00000 @@ -559,7 +549,6 @@ #define CONFIG_VERSION_VARIABLE #define CONFIG_IMAGE_FORMAT_LEGACY -#define CONFIG_CMD_FDT #define CONFIG_CMD_HASH #define CONFIG_SHA1 #define CONFIG_SHA256 diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 526659c..b8ee44d 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -171,16 +171,9 @@ /* * U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 235fdd1..94fc077 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -18,7 +18,6 @@ #define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_MX31_CLK32 32000 - #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -53,9 +52,7 @@ /*********************************************************** * Command definition ***********************************************************/ -#define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_BOOTDELAY 3 @@ -94,7 +91,6 @@ "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \ "sync:1241513985,vmode:0\0" - #define CONFIG_SMC911X #define CONFIG_SMC911X_BASE 0xa8000000 #define CONFIG_SMC911X_32_BIT @@ -183,7 +179,6 @@ #define CONFIG_HARD_SPI #define CONFIG_MXC_SPI -#define CONFIG_CMD_SPI #define CONFIG_S6E63D6 diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 24da83c..0d4f292 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -68,7 +68,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION - /* * BOOTP options */ @@ -77,19 +76,12 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_IDE #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -342,11 +334,6 @@ static inline void tws_data_config_output(unsigned output) #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ /* - * Enable loopw command. - */ -#define CONFIG_LOOPW - -/* * Various low-level settings */ #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 43d2c3d..b95851a 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -74,7 +73,6 @@ */ /* #define SKIP_CONFIG_RELOCATE_UBOOT */ - /* * Physical Memory Map */ @@ -97,7 +95,6 @@ * - SIB block * - U-Boot environment */ -#define CONFIG_CMD_ARMFLASH #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_SYS_FLASH_BASE 0x24000000 diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index c80e915..a5a8819 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -28,7 +28,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -54,7 +53,6 @@ #define CONFIG_EEPRO100 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - /*----------------------------------------------------------------------- * There are various dependencies on the core module (CM) fitted * Users should refer to their CM user guide diff --git a/include/configs/intip.h b/include/configs/intip.h index 913fdab..f3db077 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -281,12 +281,8 @@ #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE #define CONFIG_CMD_DTT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB /* Partitions */ #define CONFIG_MAC_PARTITION @@ -311,7 +307,6 @@ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - /* * External Bus Controller (EBC) Setup */ @@ -326,7 +321,6 @@ * 0xfc00.0000 -> 4.cc00.0000 */ - /* Memory Bank 0 (NOR-FLASH) initialization */ #define CONFIG_SYS_EBC_PB0AP 0x10055e00 #define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000) diff --git a/include/configs/io.h b/include/configs/io.h index f05eb0a..0dd7f00 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -62,10 +62,8 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_DTT -#undef CONFIG_CMD_DHCP #undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ /* diff --git a/include/configs/iocon.h b/include/configs/iocon.h index f75ca76..43688c7 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -61,10 +61,8 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_FPGAD #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ /* diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 3638648..4a9093c 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -16,14 +16,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf532-0.5 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_NAND - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -47,7 +45,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 3 - /* * Memory Settings */ @@ -64,7 +61,6 @@ #define CONFIG_SYS_MONITOR_LEN (384 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -77,14 +73,12 @@ #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE + 2) - /* * Flash Settings */ #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_SYS_NO_FLASH /* we have only NAND */ - /* * SPI Settings */ @@ -92,7 +86,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -102,7 +95,6 @@ #define CONFIG_ENV_SIZE 0x10000 #define CONFIG_ENV_SECT_SIZE 0x10000 - /* * NAND Settings */ @@ -122,7 +114,6 @@ #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) #define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 - /* * Misc Settings */ @@ -134,7 +125,6 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_BOOTCOMMAND "run nandboot" - /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 3c4a70c..b2a6e7f 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -90,7 +90,6 @@ #define CONFIG_SYS_DA850_DDR2_SDBCR2 0x00000004 #define CONFIG_SYS_DA850_DDR2_PBBPR 0x00000020 - #define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ (13 << DV_DDR_SDTMR1_RFC_SHIFT) | \ (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ @@ -129,7 +128,6 @@ DAVINCI_ABCR_TA(0) | \ DAVINCI_ABCR_ASIZE_8BIT) - /* * Serial Driver info */ @@ -212,7 +210,6 @@ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY @@ -253,11 +250,7 @@ * U-Boot commands */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI @@ -265,9 +258,6 @@ #endif #ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING #endif #define CONFIG_CMD_NAND diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index ea9d8b0..55ed656 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -106,14 +106,9 @@ #define CONFIG_CMD_BMP /* BMP support */ #endif #define CONFIG_CMD_DATE /* support for RTC, date/time...*/ -#define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_IDE /* IDE harddisk support */ #define CONFIG_CMD_IRQ /* irqinfo */ -#define CONFIG_CMD_MII /* MII support */ #define CONFIG_CMD_PCI /* pciinfo */ -#define CONFIG_CMD_USB /* USB Support */ #define CONFIG_SYS_LOWBOOT 1 @@ -291,8 +286,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_LOOPW - /* * Various low-level settings */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 59dbb20..953c088 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -24,13 +24,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -41,15 +39,12 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER @@ -61,7 +56,6 @@ #define CONFIG_CMD_PCI /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index b494683..0628203 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -73,7 +73,6 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ - /* * BOOTP options */ @@ -82,17 +81,14 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_SNTP #if defined(CONFIG_PCI) #define CODFIG_CMD_PCI #endif - /* * Autobooting */ @@ -204,7 +200,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -239,7 +234,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index a2d2646..3f98510 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -63,7 +63,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC #undef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_IS_IN_FAT diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 664896b..9513c6d 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -175,11 +175,8 @@ #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE #define CONFIG_CMD_ECCTEST -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP #define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */ #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ diff --git a/include/configs/kc1.h b/include/configs/kc1.h index ee7d9ce..b08cf21 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -80,8 +80,6 @@ #define CONFIG_SYS_I2C_OMAP24XX #define CONFIG_I2C_MULTI_BUS -#define CONFIG_CMD_I2C - /* * Flash */ @@ -96,8 +94,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC - /* * Power */ @@ -156,7 +152,6 @@ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_CBSIZE 512 @@ -184,19 +179,6 @@ #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_OMAP2PLUS -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 - -/* - * Download - */ - -#define CONFIG_USB_GADGET_DOWNLOAD - -#define CONFIG_G_DNL_VENDOR_NUM 0x0451 -#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" - /* * Fastboot */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 1990b2d..227504f 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -369,7 +369,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP #define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 5edc8f6..9f76034 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -13,15 +13,9 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DEFAULTENV_VARS -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MTDPARTS @@ -33,7 +27,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -56,9 +49,6 @@ #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Hit <SPACE> key to stop autoboot in %2ds\n" -#define CONFIG_AUTOBOOT_STOP_STR " " /* Support the IVM EEprom */ #define CONFIG_SYS_IVM_EEPROM_ADR 0x50 diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index dfc1c7e..25db704 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -41,7 +41,6 @@ #include "keymile-common.h" #define CONFIG_CMD_NAND -#define CONFIG_CMD_SF /* SPI NOR Flash default params, used by sf commands */ #define CONFIG_SF_DEFAULT_SPEED 8100000 @@ -159,7 +158,6 @@ */ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_CMD_MII /* to debug mdio phy config */ #define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index d981951..9232ee3 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -255,9 +255,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_KM_CONSOLE_TTY "ttyS0" -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C @@ -288,7 +285,6 @@ int get_scl(void); * eSPI - Enhanced SPI */ #define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/km8360.h b/include/configs/km8360.h index 49b9200..c8039e1 100644 --- a/include/configs/km8360.h +++ b/include/configs/km8360.h @@ -233,7 +233,6 @@ #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - #ifdef CONFIG_KMCOGE5NE /* BFTIC3: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT6L (\ diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index a445aaf..b377c41 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -180,5 +180,4 @@ #undef CONFIG_KIRKWOOD_PCIE_INIT #endif - #endif /* _CONFIG_KM_KIRKWOOD */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index caeb14d..121fe3f 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -65,7 +65,6 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 /* i2c */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SH #define CONFIG_SYS_I2C_SLAVE 0x7F @@ -97,7 +96,6 @@ /* SD */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_SH_SDHI_FREQ 97500000 diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 1f2d2a4..bcb9e7e 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -48,7 +48,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC #define CONFIG_SUPPORT_EMMC_BOOT /* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ @@ -115,15 +114,12 @@ BUR_COMMON_ENV \ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_CMD_BOOTZ /* USB configuration */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -/* attention! not only for gadget, enables also highspeed in hostmode */ -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 @@ -142,9 +138,7 @@ BUR_COMMON_ENV \ */ #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE -#define CONFIG_CMD_FS_GENERIC #endif /* CONFIG_MMC, ... */ #endif /* __CONFIG_KWB_H__ */ diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 6c9eed4..710629b 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -28,8 +28,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_BOOTZ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "root=/dev/null console=ttySC4,115200" @@ -125,15 +123,12 @@ #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ /* Ether */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_SMC911X #define CONFIG_SMC911X_BASE (0x10000000) #define CONFIG_SMC911X_32_BIT #define CONFIG_NFS_TIMEOUT 10000UL /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SH #define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 5 diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 842169d..9b2c575 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -54,13 +54,8 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */ -#define CONFIG_CMD_USB #endif /* @@ -94,15 +89,7 @@ #undef CONFIG_ENV_SPI_MAX_HZ #undef CONFIG_SYS_IDE_MAXBUS #undef CONFIG_SYS_IDE_MAXDEVICE -#undef CONFIG_SYS_PROMPT #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ -#if defined(CONFIG_D2NET_V2) -#define CONFIG_SYS_PROMPT "d2v2> " -#elif defined(CONFIG_NET2BIG_V2) -#define CONFIG_SYS_PROMPT "2big2> " -#else -#define CONFIG_SYS_PROMPT "ns2> " -#endif /* * Enable platform initialisation via misc_init_r() function @@ -161,13 +148,6 @@ /* * File systems support */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -/* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER /* * Console configuration diff --git a/include/configs/lager.h b/include/configs/lager.h index ad8b12f..9971ad8 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -88,7 +88,6 @@ /* MMC */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_SH_MMCIF diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 79fa3c4..1aad97d 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_TEXT_BASE 0xc1080000 - /* * Memory Info */ @@ -128,7 +127,6 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SPI -#define CONFIG_CMD_SF #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) @@ -155,12 +153,10 @@ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY #define CONFIG_MX_CYCLIC -#define CONFIG_OF_LIBFDT /* * Linux Information @@ -212,19 +208,13 @@ /* * U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif -#define CONFIG_CMD_SPI - #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE (16 << 10) @@ -241,10 +231,6 @@ */ #ifdef CONFIG_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT3 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC #endif /* additions for new relocation code, must added to all boards */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 62cf6e5..3796395 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -395,7 +395,6 @@ unsigned long get_board_ddr_clk(void); /* * I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -413,11 +412,9 @@ unsigned long get_board_ddr_clk(void); * MMC */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* SPI */ @@ -431,7 +428,6 @@ unsigned long get_board_ddr_clk(void); /* DM SPI */ #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) -#define CONFIG_CMD_SF #define CONFIG_DM_SPI_FLASH #define CONFIG_SPI_FLASH_DATAFLASH #endif @@ -461,9 +457,7 @@ unsigned long get_board_ddr_clk(void); #endif #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_EXT2 #endif /* @@ -560,17 +554,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_PCI #endif -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#undef CONFIG_CMD_IMLS -#endif - #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN @@ -605,8 +591,6 @@ unsigned long get_board_ddr_clk(void); * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ @@ -614,9 +598,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MEMINFO -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff @@ -667,8 +648,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif -#define CONFIG_CMD_BOOTZ - #define CONFIG_MISC_INIT_R /* Hash command with SHA acceleration supported in hardware */ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index b2e431a..3e32128 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -64,9 +64,7 @@ #endif #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_EXT2 #endif /* @@ -281,7 +279,6 @@ /* * I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -301,11 +298,9 @@ * MMC */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* SPI */ @@ -320,7 +315,6 @@ /* DM SPI */ #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) -#define CONFIG_CMD_SF #define CONFIG_DM_SPI_FLASH #endif @@ -409,17 +403,9 @@ #define CONFIG_CMD_PCI #endif -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#undef CONFIG_CMD_IMLS -#endif - #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN @@ -450,8 +436,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ @@ -459,9 +443,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MEMINFO -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff @@ -510,8 +491,6 @@ #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif -#define CONFIG_CMD_BOOTZ - #define CONFIG_MISC_INIT_R /* Hash command with SHA acceleration supported in hardware */ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e900c50..54968b5 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -135,7 +135,6 @@ #endif /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 @@ -175,16 +174,11 @@ #endif /* Command line configuration */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_PING /* MMC */ #define CONFIG_MMC #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_GENERIC_MMC @@ -194,7 +188,6 @@ /* DSPI */ #define CONFIG_FSL_DSPI #ifdef CONFIG_FSL_DSPI -#define CONFIG_CMD_SF #define CONFIG_DM_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO /* cs0 */ #define CONFIG_SPI_FLASH_SST /* cs1 */ @@ -270,11 +263,8 @@ /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 7c19122..d71a229 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -109,12 +109,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_CMD_SCSI -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_BOARD_LATE_INIT - /* EEPROM */ #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID @@ -229,7 +226,6 @@ unsigned long get_board_ddr_clk(void); #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #endif /* @@ -397,9 +393,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_EXT2 #endif /* @@ -407,17 +401,11 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_MISC_INIT_R #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MEMINFO -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff @@ -464,8 +452,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_SIZE 0x20000 #endif -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_MII #define CONFIG_CMDLINE_TAG #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index bc40b06..6d35be2 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -246,7 +246,6 @@ /* FMan */ #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_FMAN_ENET -#define CONFIG_CMD_MII #define CONFIG_PHYLIB #define CONFIG_PHYLIB_10G #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ @@ -283,9 +282,7 @@ #define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_EXT2 #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 57e2a29..8e0b472 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -7,7 +7,6 @@ #ifndef __LS2_COMMON_H #define __LS2_COMMON_H - #define CONFIG_REMAKE_ELF #define CONFIG_FSL_LAYERSCAPE #define CONFIG_FSL_LSCH3 @@ -15,7 +14,6 @@ #define CONFIG_GICV3 #define CONFIG_FSL_TZPC_BP147 - #include <asm/arch/ls2080a_stream_id.h> #include <asm/arch/config.h> #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2)) @@ -89,7 +87,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -213,12 +210,7 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_PCIE_MEM_SIZE 0x40000000 /* 1G */ /* Command line configuration */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) @@ -267,8 +259,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 @@ -302,5 +292,4 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - #endif /* __LS2_COMMON_H */ diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h index 0dbe95f..bc0d678 100644 --- a/include/configs/ls2080a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -72,7 +72,6 @@ #define CONFIG_SYS_NAND_MAX_ECCPOS 256 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 - #define CONFIG_SYS_NAND_CSPR_EXT (0x0) #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ @@ -132,11 +131,9 @@ /* MMC */ #define CONFIG_MMC #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 91fad0a..2d7567f 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -45,8 +45,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_CMD_SCSI -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_BOARD_LATE_INIT @@ -119,7 +117,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_MAX_ECCPOS 256 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 - #define CONFIG_SYS_NAND_CSPR_EXT (0x0) #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ @@ -283,7 +280,6 @@ unsigned long get_board_ddr_clk(void); /* SPI */ #ifdef CONFIG_FSL_DSPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH #endif @@ -326,11 +322,9 @@ unsigned long get_board_ddr_clk(void); /* MMC */ #define CONFIG_MMC #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -354,7 +348,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_MEMAC #define CONFIG_PHYLIB #define CONFIG_PHYLIB_10G -#define CONFIG_CMD_MII #define CONFIG_PHY_VITESSE #define CONFIG_PHY_REALTEK #define CONFIG_PHY_TERANETICS @@ -395,9 +388,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_EXT2 #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 15a1172..5bec509 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -63,8 +63,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_CMD_SCSI -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_BOARD_LATE_INIT @@ -127,7 +125,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_NAND_MAX_ECCPOS 256 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 - #define CONFIG_SYS_NAND_CSPR_EXT (0x0) #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ @@ -272,7 +269,6 @@ unsigned long get_board_sys_clk(void); /* SPI */ #ifdef CONFIG_FSL_DSPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR #endif @@ -308,11 +304,9 @@ unsigned long get_board_sys_clk(void); /* MMC */ #define CONFIG_MMC #ifdef CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -327,9 +321,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_EXT2 /* Initial environment variables */ #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 8fb0135..e878cbe 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -8,7 +8,6 @@ #ifndef _CONFIG_LSXL_H #define _CONFIG_LSXL_H - /* * Version number information */ @@ -39,7 +38,6 @@ #define CONFIG_KIRKWOOD_GPIO #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -51,18 +49,8 @@ /* * Commands configuration */ -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_IDE -#define CONFIG_CMD_PING -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_USB -#define CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION @@ -82,9 +70,6 @@ #undef CONFIG_SF_DEFAULT_SPEED #define CONFIG_SF_DEFAULT_SPEED 25000000 - -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* * Environment variables configurations */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 648e189..d5082fa 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -23,7 +23,6 @@ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #define CONFIG_440 1 /* ... PPC440 family */ - #define CONFIG_SYS_TEXT_BASE 0xFFF80000 #define CONFIG_HOSTNAME lwmon5 @@ -401,16 +400,10 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM @@ -419,7 +412,6 @@ #endif #ifdef CONFIG_440EPX -#define CONFIG_CMD_USB #endif /* @@ -429,8 +421,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -447,7 +437,6 @@ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 57599f9..428128d 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -20,29 +20,13 @@ #define CONFIG_DOS_PARTITION #define CONFIG_FAT_WRITE -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BMP -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_USB #define CONFIG_VIDEO - /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index dc85768..4349357 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -28,26 +28,13 @@ #define CONFIG_DOS_PARTITION #define CONFIG_FAT_WRITE -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BMP #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_PING #define CONFIG_CMD_SATA -#define CONFIG_CMD_USB #define CONFIG_VIDEO - /* * Memory configurations */ @@ -86,7 +73,6 @@ #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ #define CONFIG_AUTO_COMPLETE /* Command auto complete */ #define CONFIG_CMDLINE_EDITING /* Command history etc */ -#define CONFIG_SYS_HUSH_PARSER /* * Serial Driver diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index e061a10..fb14463 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -23,20 +23,6 @@ #define CONFIG_FAT_WRITE /*#define CONFIG_LCD*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_USB - /* * Memory configurations */ @@ -131,8 +117,6 @@ #define CONFIG_USB_STORAGE /* USB device */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_MANUFACTURER "DENX" @@ -150,7 +134,6 @@ #define CONFIG_LOADADDR 0x20800000 #define CONFIG_BOOTCOMMAND "run mmc_mmc" #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_OF_LIBFDT /* * Extra Environments diff --git a/include/configs/makalu.h b/include/configs/makalu.h index fd4c26e..dcfe3d7 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -236,7 +236,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DTT #define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP /* POST support */ #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ diff --git a/include/configs/malta.h b/include/configs/malta.h index aecc8ce..04dca71 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -53,22 +53,11 @@ #define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) -/* - * Console configuration - */ -#undef CONFIG_SYS_PROMPT -#if defined(CONFIG_SYS_LITTLE_ENDIAN) -#define CONFIG_SYS_PROMPT "maltael # " -#else -#define CONFIG_SYS_PROMPT "malta # " -#endif - #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING @@ -117,10 +106,8 @@ * Commands */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_IDE #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */ diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h index 3c081a2..8d4a8cd 100644 --- a/include/configs/manroland/common.h +++ b/include/configs/manroland/common.h @@ -23,15 +23,9 @@ */ #define CONFIG_CMD_DATE #define CONFIG_CMD_DISPLAY -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_DTT #define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MII -#define CONFIG_CMD_SNTP /* * 8-symbol LED display (can be accessed with 'display' command) @@ -113,6 +107,5 @@ /* * Enable loopw command. */ -#define CONFIG_LOOPW #endif /* __MANROLAND_COMMON_H */ diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 43d7fd0..fed310f 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -24,14 +24,7 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TFTPPUT -#define CONFIG_CMD_TIME /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 9a4f638..3dbd920 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -25,7 +25,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_MCX #define CONFIG_BOARD_LATE_INIT - #define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ @@ -109,19 +108,10 @@ #define CONFIG_USB_ETHER_MCS7830 /* commands to include */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_USB #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_CACHE #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE @@ -140,7 +130,6 @@ #define CONFIG_RTC_DS1337 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_CMD_MII /* * Board NAND Info. */ @@ -263,7 +252,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index e561026..9262f72 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -242,12 +242,7 @@ #define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ CLOCK_SCCR2_I2C_EN) - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ @@ -295,18 +290,11 @@ #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_EEPROM #define CONFIG_CMD_DATE #undef CONFIG_CMD_FUSE #undef CONFIG_CMD_IDE -#undef CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_DOS_PARTITION diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 4c05fc8..f3a6a86 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -23,7 +23,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* NAND support */ #define CONFIG_CMD_NAND @@ -38,14 +37,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX /* General networking support */ -#define CONFIG_CMD_DHCP /* LCD support */ #define CONFIG_SYS_WHITE_ON_BLACK diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 88fb3e8..f71b662 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -56,8 +56,6 @@ #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ #define CONFIG_PREBOOT /* enable preboot variable */ -#define CONFIG_CMD_BOOTZ - /* * Hardware drivers */ @@ -85,13 +83,6 @@ /* * Command line configuration. */ -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #ifdef CONFIG_SYS_USE_NANDFLASH #define CONFIG_CMD_NAND @@ -185,7 +176,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 09bfabc..801d674 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -172,14 +172,11 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) -# define CONFIG_CMD_CACHE #else -# undef CONFIG_CMD_CACHE #endif #if defined(FLASH) @@ -193,7 +190,6 @@ #else #if defined(SPIFLASH) -# define CONFIG_CMD_SF # if !defined(RAMENV) # define CONFIG_CMD_SAVES @@ -275,7 +271,6 @@ #if defined(CONFIG_XILINX_AXIEMAC) # define CONFIG_MII 1 -# define CONFIG_CMD_MII 1 # define CONFIG_PHY_GIGE 1 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 # define CONFIG_PHY_ATHEROS 1 @@ -290,7 +285,6 @@ # define CONFIG_PHY_VITESSE 1 #else # undef CONFIG_MII -# undef CONFIG_CMD_MII #endif /* SPL part */ diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h index e0006d8..674d1f6 100644 --- a/include/configs/minnowmax.h +++ b/include/configs/minnowmax.h @@ -28,12 +28,10 @@ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT} - #define CONFIG_MMC #define CONFIG_SDHCI #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SDMA -#define CONFIG_CMD_MMC #undef CONFIG_USB_MAX_CONTROLLER_COUNT #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index f4d5dbc..62919e9 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -34,19 +34,13 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_IMMAP #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO /* @@ -73,8 +67,6 @@ #undef CONFIG_BOOTARGS #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/mpc5121-common.h b/include/configs/mpc5121-common.h index 0d70e83..f06ca9c 100644 --- a/include/configs/mpc5121-common.h +++ b/include/configs/mpc5121-common.h @@ -29,7 +29,5 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} #define CONFIG_CMDLINE_EDITING 1 /* command line history */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER #endif /* __MPC5121_COMMON_H */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 4ac291c..e0c9a98 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -291,10 +291,6 @@ #define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif /* * Clocks in use @@ -336,7 +332,6 @@ #define CONFIG_SYS_PCI_IO_PHYS 0x84000000 #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ - #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ @@ -383,7 +378,6 @@ /* * USB Support */ -#define CONFIG_CMD_USB #if defined(CONFIG_CMD_USB) #define CONFIG_USB_EHCI /* Enable EHCI Support */ @@ -414,16 +408,10 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #undef CONFIG_CMD_FUSE @@ -458,14 +446,12 @@ "1m(u-boot);" \ "mpc5121.nand:-(data)" - #if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB) #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION -#define CONFIG_CMD_FAT #define CONFIG_SUPPORT_VFAT #endif /* defined(CONFIG_CMD_IDE) */ @@ -491,7 +477,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif - #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 1bab9ab..66e1a45 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -302,9 +302,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -391,11 +388,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 3ac4b0b..3f2bfa4 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -11,7 +11,6 @@ #define __MPR2_H /* Supported commands */ -#define CONFIG_CMD_CACHE /* Default environment variables */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 3e99966..27ed1d5 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -13,10 +13,8 @@ #define CONFIG_MS7720SE 1 #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_CACHE #define CONFIG_CMD_PCMCIA #define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC0,115200" @@ -57,7 +55,6 @@ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - /* FLASH */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 12bb3a0..f983f2d 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -13,7 +13,6 @@ #define CONFIG_MS7722SE 1 #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index bbd2d6b..025a4a6 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -64,7 +64,6 @@ #undef CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) diff --git a/include/configs/munices.h b/include/configs/munices.h index 0601256..efbd447 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -26,9 +26,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_IMMAP -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 674aa0a..6d4bbd1 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -138,9 +138,7 @@ * File system */ #ifdef CONFIG_SYS_MVFS -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE diff --git a/include/configs/mv-plug-common.h b/include/configs/mv-plug-common.h index 496bc1f..bf583d0 100644 --- a/include/configs/mv-plug-common.h +++ b/include/configs/mv-plug-common.h @@ -8,7 +8,6 @@ #ifndef _CONFIG_MARVELL_PLUG_H #define _CONFIG_MARVELL_PLUG_H - /* * High Level Configuration Options (easy to change) */ @@ -24,7 +23,6 @@ #ifdef CONFIG_SYS_MVFS #define CONFIG_BZIP2 #define CONFIG_LZMA -#define CONFIG_CMD_BOOTZ #endif /* CONFIG_SYS_MVFS */ /* @@ -34,12 +32,10 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_ENV #define CONFIG_CMD_IDE -#define CONFIG_CMD_MII /* * Extra file system */ -#define CONFIG_CMD_EXT4 /* * mv-common.h should be defined after CMD configs since it used them diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index e6a08d1..1bdbe4b 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -15,13 +15,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_LED -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index 92f8f86..542f1f4 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -18,12 +18,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB -#define CONFIG_CMD_BOOTZ #define CONFIG_VIDEO /* Memory configuration */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 6dbeeca..c63887b 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -82,11 +82,6 @@ #define CONFIG_SYS_LONGHELP /* U-Boot commands */ -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT /* Ethernet */ #define CONFIG_FEC_MXC @@ -111,7 +106,6 @@ #define CONFIG_DOS_PARTITION /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -123,10 +117,6 @@ /* Ethernet Configs */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - #define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ @@ -224,7 +214,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 16 diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 4d86c13..b3c03b3 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -20,20 +20,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_USB -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS #define CONFIG_VIDEO diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 5f94e19..b9992de 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -14,7 +14,6 @@ /* High Level Configuration Options */ #define CONFIG_MX31 1 /* This is a mx31 */ - #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -63,9 +62,6 @@ /*********************************************************** * Command definition ***********************************************************/ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SPI #define CONFIG_CMD_DATE #define CONFIG_BOOTDELAY 3 @@ -157,7 +153,6 @@ #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - /*----------------------------------------------------------------------- * CFI FLASH driver setup */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 3813e25..3f63007 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -19,7 +19,6 @@ /* High Level Configuration Options */ #define CONFIG_MX31 /* This is a mx31 */ - #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -80,13 +79,8 @@ /*********************************************************** * Command definition ***********************************************************/ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SPI #define CONFIG_CMD_DATE #define CONFIG_CMD_NAND -#define CONFIG_CMD_BOOTZ #define CONFIG_BOARD_LATE_INIT @@ -178,7 +172,6 @@ #define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 - /* Configuration of lowlevel_init.S (clocks and SDRAM) */ #define CCM_CCMR_SETUP 0x074B0BF5 #define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 1177b0a..aed0939 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -48,7 +48,6 @@ #define CONFIG_MXC_SPI #define CONFIG_MXC_GPIO - /* * PMIC Configs */ @@ -79,29 +78,18 @@ /* * Command definition */ -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_DNS #define CONFIG_CMD_NAND -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_SPI -#define CONFIG_CMD_MII #define CONFIG_NET_RETRY_COUNT 100 #define CONFIG_CMD_DATE -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_BOOTDELAY 1 @@ -133,7 +121,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 31cd5bb..23b8b46 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -49,7 +49,6 @@ /* * SPI Configs * */ -#define CONFIG_CMD_SPI #define CONFIG_MXC_SPI @@ -73,9 +72,7 @@ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* @@ -87,13 +84,7 @@ #define IMX_FEC_BASE FEC_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1F -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - /* USB Configs */ -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_STORAGE @@ -126,7 +117,6 @@ /*********************************************************** * Command definition ***********************************************************/ -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DATE @@ -213,7 +203,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 22e1b68..e697261 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -31,8 +31,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MXC_GPIO -#define CONFIG_CMD_BOOTZ - #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI #define CONFIG_NAND_MXC @@ -47,7 +45,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -60,19 +57,13 @@ #define CONFIG_SYS_FSL_ESDHC_NUM 2 #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* Eth Configs */ #define CONFIG_HAS_ETH1 #define CONFIG_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -184,7 +175,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ @@ -225,7 +215,6 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 - #define MX53ARD_CS1GCR1 (CSEN | DSZ(2)) #define MX53ARD_CS1RCR1 (RCSN(2) | OEN (1) | RWSC(22)) #define MX53ARD_CS1RCR2 RBEN(2) diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index fca567d..feb5580 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -36,7 +36,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -57,9 +56,7 @@ #define CONFIG_SYS_FSL_ESDHC_NUM 2 #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* Eth Configs */ @@ -69,9 +66,6 @@ #define IMX_FEC_BASE FEC_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1F -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE /* Miscellaneous commands */ @@ -131,7 +125,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index cfb3ae3..8743ddc 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -41,11 +41,7 @@ #define CONFIG_SYS_FSL_ESDHC_NUM 2 #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION /* Eth Configs */ @@ -55,13 +51,7 @@ #define IMX_FEC_BASE FEC_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1F -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - /* USB Configs */ -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_STORAGE @@ -95,7 +85,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_BOOTDELAY 1 @@ -178,7 +167,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 33d2163..9c76678 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -35,7 +35,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -48,9 +47,7 @@ #define CONFIG_SYS_FSL_ESDHC_NUM 1 #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* Eth Configs */ @@ -61,10 +58,6 @@ #define IMX_FEC_BASE FEC_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1F -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -118,7 +111,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 3abc773..17b6c48 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -69,19 +69,11 @@ #define CONFIG_BAUDRATE 115200 /* Filesystems and image support */ -#define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT /* Miscellaneous configurable options */ -#undef CONFIG_CMD_IMLS #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512 @@ -89,7 +81,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #ifndef CONFIG_SYS_DCACHE_OFF -#define CONFIG_CMD_CACHE #endif /* GPIO */ @@ -97,7 +88,6 @@ /* MMC */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_FSL_ESDHC diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 4feb121..d64323e 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -27,9 +27,6 @@ /* Ethernet Configuration */ #define CONFIG_FEC_MXC -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RGMII @@ -56,7 +53,6 @@ #define CONFIG_CONSOLE_MUX /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 86a0316..eb89031 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -23,9 +23,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -132,7 +129,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* USB Configs */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 1c99805..6039fc4 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -16,7 +16,6 @@ #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -48,7 +47,6 @@ #endif /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 3e1b760..1ee880d 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -24,9 +24,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -37,7 +34,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 @@ -167,7 +163,6 @@ "echo WARNING: Could not determine dtb to use; fi; " \ "fi;\0" \ - #define CONFIG_BOOTCOMMAND \ "run findfdt;" \ "mmc dev ${mmcdev};" \ @@ -234,18 +229,9 @@ #define CONFIG_IMX_VIDEO_SKIP #ifndef CONFIG_SPL -#define CONFIG_CI_UDC #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 -#define CONFIG_G_DNL_MANUFACTURER "FSL" #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT @@ -254,7 +240,6 @@ #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* USB Device Firmware Update support */ -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_DFU_SF diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index bfc4f61..25f51be 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -40,7 +40,6 @@ #endif /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -55,7 +54,6 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 /* USB Configs */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 6423796..d53e416 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -32,7 +32,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -46,9 +45,6 @@ #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -168,7 +164,6 @@ #define CONFIG_ENV_IS_IN_MMC #endif -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 @@ -178,7 +173,6 @@ #endif /* USB Configs */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 2e739f9..d771f9d 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -6,13 +6,11 @@ * SPDX-License-Identifier: GPL-2.0+ */ - #ifndef __CONFIG_H #define __CONFIG_H #include "mx6_common.h" - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) @@ -120,7 +118,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -151,9 +148,6 @@ #define CONFIG_APBH_DMA_BURST8 /* Network */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII @@ -167,8 +161,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS - -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 @@ -183,11 +175,8 @@ #define CONFIG_IMX_THERMAL -#define CONFIG_CMD_TIME - #define CONFIG_FSL_QSPI #ifdef CONFIG_FSL_QSPI -#define CONFIG_CMD_SF #define CONFIG_SYS_FSL_QSPI_AHB #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index fdf2396..183a759 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -6,7 +6,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ - #ifndef __CONFIG_H #define __CONFIG_H @@ -29,7 +28,6 @@ #ifdef CONFIG_IMX_BOOTAUX /* Set to QSPI2 B flash at default */ #define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000 -#define CONFIG_CMD_SETEXPR #define UPDATE_M4_ENV \ "m4image=m4_qspi.bin\0" \ @@ -149,7 +147,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -164,9 +161,6 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 /* Network */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII @@ -179,8 +173,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS - -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 @@ -205,11 +197,7 @@ #define CONFIG_IMX_THERMAL -#define CONFIG_CMD_TIME - - #ifdef CONFIG_FSL_QSPI -#define CONFIG_CMD_SF #define CONFIG_SYS_FSL_QSPI_LE #define CONFIG_SYS_FSL_QSPI_AHB #ifdef CONFIG_MX6SX_SABRESD_REVA diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 2fff34a..15976f7 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -8,7 +8,6 @@ #ifndef __MX6UL_14X14_EVK_CONFIG_H #define __MX6UL_14X14_EVK_CONFIG_H - #include <asm/arch/imx-regs.h> #include <linux/sizes.h> #include "mx6_common.h" @@ -50,7 +49,6 @@ #endif /* I2C configs */ -#define CONFIG_CMD_I2C #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC @@ -154,7 +152,6 @@ "else run netboot; fi" /* Miscellaneous configurable options */ -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) @@ -187,16 +184,13 @@ #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_BMODE #ifndef CONFIG_SYS_DCACHE_OFF -#define CONFIG_CMD_CACHE #endif #define CONFIG_FSL_QSPI #ifdef CONFIG_FSL_QSPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR #define CONFIG_SF_DEFAULT_BUS 0 @@ -209,7 +203,6 @@ #endif /* USB Configs */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index 9bd6114..3c9a794 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -44,17 +44,10 @@ #define CONFIG_BAUDRATE 115200 /* Filesystems and image support */ -#define CONFIG_CMD_BOOTZ #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT /* Miscellaneous configurable options */ -#undef CONFIG_CMD_IMLS #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512 @@ -62,7 +55,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #ifndef CONFIG_SYS_DCACHE_OFF -#define CONFIG_CMD_CACHE #endif /* GPIO */ @@ -73,7 +65,6 @@ /* MMC */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_FSL_ESDHC diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index da1d26f..ece8a03 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -27,7 +27,6 @@ #define CONFIG_CSF_SIZE 0x4000 /* Network */ -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define CONFIG_FEC_XCV_TYPE RGMII @@ -52,11 +51,7 @@ #undef CONFIG_BOOTM_PLAN9 #undef CONFIG_BOOTM_RTEMS -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV - /* I2C configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -68,7 +63,6 @@ #ifdef CONFIG_IMX_BOOTAUX /* Set to QSPI1 A flash at default */ #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 -#define CONFIG_CMD_SETEXPR #define UPDATE_M4_ENV \ "m4image=m4_qspi.bin\0" \ @@ -185,7 +179,6 @@ "fi; " \ "else run netboot; fi" -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) @@ -244,7 +237,6 @@ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX7 #define CONFIG_USB_STORAGE @@ -257,21 +249,11 @@ #define CONFIG_IMX_THERMAL -#define CONFIG_CI_UDC #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 -#define CONFIG_G_DNL_MANUFACTURER "FSL" /* USB Device Firmware Update support */ -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_DFU_RAM @@ -293,7 +275,6 @@ #endif #ifdef CONFIG_FSL_QSPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_MACRONIX #define CONFIG_SPI_FLASH_BAR diff --git a/include/configs/mxs.h b/include/configs/mxs.h index a4ffe75..0882d5d 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -97,8 +97,6 @@ #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ #define CONFIG_AUTO_COMPLETE /* Command auto complete */ #define CONFIG_CMDLINE_EDITING /* Command history etc */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* Booting Linux */ #define CONFIG_CMDLINE_TAG diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 36a00d3..dc8e265 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -44,18 +44,12 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_DATE #define CONFIG_CMD_IDE #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* * mv-common.h should be defined after CMD configs since it used them @@ -115,9 +109,6 @@ /* * File system */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_JFFS2_NAND #define CONFIG_JFFS2_LZO diff --git a/include/configs/neo.h b/include/configs/neo.h index bd2b190..4f244a9 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -8,7 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H - #define CONFIG_405EP 1 /* this is a PPC405 CPU */ #define CONFIG_NEO 1 /* on a Neo board */ @@ -61,10 +60,8 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_DTT -#undef CONFIG_CMD_DHCP #undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ /* diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 3604e44..b651eb3 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -19,9 +19,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R -#define CONFIG_CI_UDC #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_CDC #define CONFIG_NETCONSOLE @@ -29,7 +27,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 @@ -39,7 +36,6 @@ #endif /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -68,9 +64,6 @@ #define CONFIG_LIBATA #endif -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -82,7 +75,6 @@ #define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -315,8 +307,6 @@ #define CONFIG_CMD_BMP -#define CONFIG_CMD_TIME -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_ALT_MEMTEST /* @@ -329,16 +319,7 @@ #define CONFIG_PCIE_IMX #endif - -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -/* Netchip IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 -#define CONFIG_G_DNL_MANUFACTURER "Boundary" #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 5c41405..0fbbce6 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -124,12 +124,6 @@ #define CONFIG_SYS_NO_FLASH /* commands to include */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_EXT4 /* EXT4 Support */ -#define CONFIG_CMD_FAT /* FAT support */ - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ @@ -393,8 +387,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/novena.h b/include/configs/novena.h index d11cdc3..cfb92d6 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -19,18 +19,11 @@ #include "mx6_common.h" /* U-Boot Commands */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BMODE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_FAT_WRITE -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_SATA -#define CONFIG_CMD_TIME -#define CONFIG_CMD_USB #define CONFIG_VIDEO /* U-Boot general configurations */ @@ -165,9 +158,7 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 /* Gadget part */ -#define CONFIG_CI_UDC #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_CDC #define CONFIG_NETCONSOLE diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 4510b16..1987164 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -26,9 +26,7 @@ /* commands configuration */ #define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_IDE -#define CONFIG_CMD_MII /* * mv-common.h should be defined after CMD configs since it used them diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index 0b6173b..056f518 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -23,13 +23,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -48,22 +46,18 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #define CONFIG_KEYBOARD diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index 4ffab8a..16fa046 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -76,11 +76,6 @@ * Supported commands */ #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif @@ -293,7 +288,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 9d764d5..12b7dc5 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -46,7 +46,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_CMD_BOOTZ #define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run autoboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" @@ -180,7 +179,6 @@ "fdtaddr=40800000\0" /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 @@ -192,16 +190,12 @@ #define CONFIG_EXYNOS_ACE_SHA #define CONFIG_LIB_HW_RAND - /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 01d08dc..5196d58 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -24,8 +24,6 @@ #define TZPC_BASE_OFFSET 0x10000 -#define CONFIG_CMD_MMC - #define CONFIG_NR_DRAM_BANKS 8 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ /* Reserve the last 22 MiB for the secure firmware */ @@ -47,25 +45,9 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS -/* DWC3 */ -#define CONFIG_USB_DWC3 -#define CONFIG_USB_DWC3_GADGET -#define CONFIG_USB_DWC3_PHY_SAMSUNG - -/* USB gadget */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -/* Downloader */ -#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 -#define CONFIG_G_DNL_MANUFACTURER "Samsung" -#define CONFIG_USB_GADGET_DOWNLOAD - /* DFU */ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC -#define CONFIG_CMD_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 #define DFU_MANIFEST_POLL_TIMEOUT 25000 @@ -80,7 +62,6 @@ #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_CMD_USB_MASS_STORAGE /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ #undef CONFIG_EXYNOS_TMU diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 2112d9f..4dbe2b6 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -59,18 +59,11 @@ #define CONFIG_SYS_I2C_NOPROBES {{0x0, 0x0}} /* USB */ -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_OMAP2PLUS #define CONFIG_USB_MUSB_PIO_ONLY -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_TWL4030_USB 1 #define CONFIG_USB_ETHER #define CONFIG_USB_ETHER_RNDIS -#define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_G_DNL_VENDOR_NUM 0x0451 -#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 -#define CONFIG_G_DNL_MANUFACTURER "TI" #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE @@ -78,7 +71,6 @@ #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* USB EHCI */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP @@ -95,9 +87,6 @@ #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ /* commands to include */ -#define CONFIG_CMD_ASKENV - -#define CONFIG_CMD_CACHE #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ @@ -107,7 +96,6 @@ #define CONFIG_USB_STORAGE /* USB storage support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_LED /* LED support */ -#define CONFIG_CMD_DHCP #define CONFIG_VIDEO_OMAP3 /* DSS Support */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 996f772..9dbca1c 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -24,24 +24,16 @@ * Supported U-Boot commands * ---------------------------------------------------------------------------- */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING /* ---------------------------------------------------------------------------- * Supported U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER /* Display CPU and Board information */ #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 0f16a6e..01336ff 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -146,11 +146,9 @@ #ifdef CONFIG_USB_OMAP3 #ifdef CONFIG_USB_MUSB_HCD -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONGIG_CMD_STORAGE -#define CONFIG_CMD_FAT #ifdef CONFIG_USB_KEYBOARD #define CONFIG_SYS_USB_EVENT_POLL diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 23a8a07..a93a2fa 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -19,8 +19,6 @@ * Supported U-Boot commands * ---------------------------------------------------------------------------- */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT /* * Board revision is detected by probing the Ethernet chip. diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 5e33845..5da50a5 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -69,12 +69,9 @@ #define CONFIG_USBD_MANUFACTURER "Texas Instruments" #define CONFIG_USBD_PRODUCT_NAME "IGEP" -#define CONFIG_CMD_CACHE #ifdef CONFIG_BOOT_ONENAND #define CONFIG_CMD_ONENAND /* ONENAND support */ #endif -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #ifndef CONFIG_SPL_BUILD @@ -94,7 +91,6 @@ #include <config_distro_bootcmd.h> - #define CONFIG_EXTRA_ENV_SETTINGS \ ENV_DEVICE_SETTINGS \ MEM_LAYOUT_SETTINGS \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 304e1ce..055dcb7 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -64,13 +64,8 @@ /* commands to include */ #define CONFIG_CMD_NAND -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP /* I2C */ #define CONFIG_SYS_I2C_OMAP34XX @@ -79,17 +74,10 @@ #define CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID /* USB */ -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_OMAP2PLUS #define CONFIG_USB_MUSB_PIO_ONLY -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER #define CONFIG_USB_ETHER_RNDIS -#define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_G_DNL_VENDOR_NUM 0x0451 -#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 -#define CONFIG_G_DNL_MANUFACTURER "TI" #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE @@ -291,7 +279,6 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET - /* SMSC922x Ethernet */ #if defined(CONFIG_CMD_NET) #define CONFIG_SMC911X diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 3b1e5d7..c066eae 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -56,8 +56,6 @@ #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */ /* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_USB #ifdef CONFIG_NAND #define CONFIG_CMD_UBI /* UBI-formated MTD partition support */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 803f4b8..380ec12 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -57,7 +57,6 @@ #define CONFIG_SERIAL3 3 /* commands to include */ -#define CONFIG_CMD_CACHE /* Cache control */ /* * Board NAND Info. diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index a59fd42..99d9fc3 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -77,9 +77,6 @@ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ #endif -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - #undef CONFIG_SYS_I2C_OMAP24XX #define CONFIG_SYS_I2C_OMAP34XX diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 15f3eec..0d62ccd 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -17,7 +17,6 @@ */ /* USB UHH support options */ -#define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP @@ -33,9 +32,6 @@ #define CONFIG_UBOOT_ENABLE_PADS_ALL -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - #include <configs/ti_omap4_common.h> /* GPIO */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index a5cfa0c..86cefa3 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -88,7 +88,6 @@ #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 /* USB UHH support options */ -#define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP @@ -99,28 +98,13 @@ #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 -/* USB GADGET */ -#define CONFIG_USB_DWC3_PHY_OMAP -#define CONFIG_USB_DWC3_OMAP -#define CONFIG_USB_DWC3 -#define CONFIG_USB_DWC3_GADGET - -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 -#define CONFIG_USB_GADGET_DUALSPEED - /* USB Device Firmware Update support */ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_RAM -#define CONFIG_CMD_DFU #define CONFIG_DFU_MMC /* Enabled commands */ -#define CONFIG_CMD_DHCP /* DHCP Support */ /* USB Networking options */ #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index fc7bfce..f3287e3 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -190,8 +190,6 @@ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) #define CONFIG_VERSION_VARIABLE #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY @@ -212,20 +210,13 @@ * U-Boot commands */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif #ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING #endif #ifdef CONFIG_USE_NAND @@ -241,8 +232,6 @@ #endif #ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #endif #if !defined(CONFIG_USE_NAND) && \ @@ -261,9 +250,6 @@ #ifdef CONFIG_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC #undef CONFIG_ENV_IS_IN_MMC #endif diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 62f15b7..4defa7e 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -45,13 +45,8 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_IDE /* diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h index 28e4275..dfb8d3a 100644 --- a/include/configs/openrisc-generic.h +++ b/include/configs/openrisc-generic.h @@ -116,10 +116,6 @@ #define CONFIG_CMD_IRQ #define CONFIG_CMD_BSP -#define CONFIG_CMD_MII -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - #define CONFIG_LMB /* @@ -130,5 +126,4 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - #endif /* __CONFIG_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index fa71874..1fa2f4d 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -50,11 +50,6 @@ #define S5P_CHECK_DIDLE 0xBAD00000 #define S5P_CHECK_LPA 0xABAD0000 -#undef CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD /* MMC SPL */ diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 879ad58..891abce 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -21,7 +21,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* SF Configs */ -#define CONFIG_CMD_SF #define CONFIG_SPI #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 2 @@ -37,7 +36,6 @@ #define CONFIG_CMD_PCA953X_INFO /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -58,7 +56,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 @@ -81,7 +78,6 @@ #define CONFIG_LIBATA #endif - /* SPL */ #ifdef CONFIG_SPL #include "imx6_spl.h" @@ -92,9 +88,6 @@ #define CONFIG_SPL_SPI_LOAD #endif -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 799521e..596193d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -434,7 +434,6 @@ * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable */ - /* * Local Bus Definitions */ @@ -449,7 +448,6 @@ #define CONFIG_SYS_FLASH_BASE 0xef000000 #endif - #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) #else @@ -581,7 +579,6 @@ #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ - /* Vsc7385 switch */ #ifdef CONFIG_VSC7385_ENET #define CONFIG_SYS_VSC7385_BASE 0xffb00000 @@ -662,9 +659,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -699,7 +693,6 @@ #define CONFIG_HARD_SPI #if defined(CONFIG_SPI_FLASH) -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 #endif @@ -875,9 +868,6 @@ * Command line configuration. */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_REGINFO @@ -890,7 +880,6 @@ #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE @@ -906,14 +895,11 @@ #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #endif #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ || defined(CONFIG_FSL_SATA) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 1e49ee6..f2959c9 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -225,12 +225,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ @@ -407,9 +401,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Command line configuration. */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO /* @@ -421,7 +412,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_STORAGE @@ -433,14 +423,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #endif #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ || defined(CONFIG_FSL_SATA) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index 9ca29f8..e5dcb25 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -20,13 +20,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -37,22 +35,18 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index c55f07e..6133d3f 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -20,13 +20,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -37,15 +35,12 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER @@ -57,7 +52,6 @@ #define CONFIG_CMD_PCI /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/p2571.h b/include/configs/p2571.h index d35e255..4c75a26 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -21,13 +21,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -38,22 +36,18 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB2.0 Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 6acecb1..0e65032 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -26,7 +26,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -38,14 +37,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP /* LCD support */ #define CONFIG_SYS_WHITE_ON_BLACK diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index f490e79..caf75a6 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -108,10 +108,8 @@ #define CONFIG_NR_DRAM_BANKS 2 - #define CONFIG_MEMSIZE_IN_BYTES - /*---USB -------------------------------------------*/ #if 0 #define CONFIG_USB_OHCI @@ -159,7 +157,6 @@ #define CONFIG_SYS_ICACHE_SIZE 16384 #define CONFIG_SYS_CACHELINE_SIZE 32 - /* * BOOTP options */ @@ -168,15 +165,10 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#undef CONFIG_CMD_FAT #undef CONFIG_CMD_IDE #undef CONFIG_CMD_BEDBUG diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index b4a7225..0007c50 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -51,11 +51,8 @@ Serial console configuration * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -78,7 +75,6 @@ Autobooting /* even with bootdelay=0 */ #undef CONFIG_BOOTARGS - #define CONFIG_PREBOOT "echo;" \ "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\ "mount root filesystem over NFS;" \ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 45c140d..d555455 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -97,7 +97,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + (8 * 1024 * 1024)) -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 24000000 #define CONFIG_CONS_INDEX 1 @@ -141,17 +140,13 @@ */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_PIO_ONLY -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST #ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 4e29cf3..494524d 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -33,8 +33,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 115200 -#undef CONFIG_CMD_IMLS - /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS @@ -78,14 +76,9 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -97,7 +90,6 @@ /* QSPI Configs*/ #ifdef CONFIG_FSL_QSPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 @@ -105,7 +97,6 @@ #endif /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC_I2C3 #define CONFIG_SYS_I2C_MXC @@ -213,8 +204,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ @@ -223,7 +212,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80010000 #define CONFIG_SYS_MEMTEST_END 0x87C00000 @@ -267,6 +255,4 @@ #define CONFIG_ENV_OFFSET_REDUND 0xC0000 #endif -#define CONFIG_CMD_BOOTZ - #endif diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index f2c05f8..3b6c7dc 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -380,13 +380,8 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #undef CONFIG_CMD_FUSE diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 1a670cb..1f33bc6 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -149,7 +149,6 @@ 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\ 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} - #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 26 #define CONFIG_SYS_NAND_ECCSTEPS 8 @@ -162,11 +161,8 @@ /* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 - - #define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_ASKENV /* monitor functions : ask for env variable */ #define CONFIG_VERSION_VARIABLE /* monitor functions : u-boot version */ #define CONFIG_CMD_DIAG /* monitor functions : Diagnostics */ @@ -196,25 +192,19 @@ */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST #if defined(CONFIG_USB_MUSB_HOST) -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif #if defined(CONFIG_SPL_BUILD) /* disable host part of MUSB in SPL */ -#undef CONFIG_USB_MUSB_HOST /* Disable CPSW SPL support so we fit within the 101KiB limit. */ #undef CONFIG_SPL_ETH_SUPPORT #endif @@ -223,7 +213,6 @@ #define CONFIG_NET_MULTI /* Network */ -#define CONFIG_CMD_MII #define CONFIG_PHYLIB #define CONFIG_PHY_RESET 1 #define CONFIG_PHY_NATSEMI diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index 78faaec..108c6a2 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -82,8 +82,6 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_ARP_TIMEOUT 500 /* millisec */ -#define CONFIG_CMD_MII - /* * BOOTP options */ @@ -92,18 +90,12 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Handover flattened device tree (dtb file) to Linux kernel - */ -#define CONFIG_OF_LIBFDT 1 - /*----------------------------------------------------------------------- * SDHC Configuration */ #define CONFIG_SDHCI #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC /*-------------------------------------------------- * USB Configuration @@ -120,15 +112,10 @@ #define CONFIG_SUPPORT_VFAT #define CONFIG_FS_FAT #define CONFIG_FAT_WRITE -#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_PART -#define CONFIG_CMD_FAT /* EXT4 FS */ #define CONFIG_FS_EXT4 -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE /* ------------------------------------------------- * Environment diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h new file mode 100644 index 0000000..d848ead --- /dev/null +++ b/include/configs/pico-imx6ul.h @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2015 Technexion Ltd. + * + * Configuration settings for the Technexion PICO-IMX6UL-EMMC board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __PICO_IMX6UL_CONFIG_H +#define __PICO_IMX6UL_CONFIG_H + + +#include <asm/arch/imx-regs.h> +#include <linux/sizes.h> +#include "mx6_common.h" +#include <asm/imx-common/gpio.h> + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART6_BASE_ADDR + +/* MMC Configs */ +#define CONFIG_FSL_USDHC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR + +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_EMMC_BOOT + +/* USB Configs */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */ + +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET + +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "FSL" + +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "FSL" + +#define CONFIG_DEFAULT_FDT_FILE "imx6ul-pico-hobbit.dtb" + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "image=zImage\0" \ + "console=ttymxc5\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr=0x83000000\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan; then " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "else run netboot; fi" + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (8 * SZ_64K) + +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 0 +#define CONFIG_MMCROOT "/dev/mmcblk0p2" + +#endif /* __PICO_IMX6UL_CONFIG_H */ diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index b2ba6fc..44ffd6d 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -33,8 +33,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -83,9 +81,6 @@ /* No NOR flash */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 2 @@ -99,7 +94,6 @@ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC @@ -108,7 +102,6 @@ #endif #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -160,7 +153,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/platinum.h b/include/configs/platinum.h index bb7e845..627e1a7 100644 --- a/include/configs/platinum.h +++ b/include/configs/platinum.h @@ -22,17 +22,11 @@ */ #define CONFIG_CMD_BMODE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_TIME #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -#define CONFIG_CMD_USB /* * Hardware configuration diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 4590063..617f927 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -23,7 +23,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* NAND support */ #define CONFIG_CMD_NAND @@ -38,14 +37,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-post.h" diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 407b83d..39af5c0 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -20,7 +20,6 @@ #include <asm/hardware.h> /* ARM asynchronous clock */ - #define CONFIG_DISPLAY_BOARDINFO #define MASTER_PLL_DIV 15 @@ -182,11 +181,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index f6886a6..111e0f5 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -18,7 +18,6 @@ */ #include <asm/hardware.h> - /* ARM asynchronous clock */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -196,11 +195,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index ede0ee1..facba38 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -22,7 +22,6 @@ */ #include <asm/hardware.h> - #define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */ #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45" @@ -71,11 +70,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 #define CONFIG_CMD_JFFS2 1 #define CONFIG_JFFS2_CMDLINE 1 @@ -155,7 +150,6 @@ #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* * Size of malloc() pool diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index b1a3dc7..6393ff3 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -13,7 +13,6 @@ #ifndef _CONFIG_POGO_E02_H #define _CONFIG_POGO_E02_H - /* * Machine type definition and ID */ @@ -33,12 +32,8 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB /* * mv-common.h should be defined after CMD configs since it used them @@ -86,8 +81,6 @@ /* * File system */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS diff --git a/include/configs/porter.h b/include/configs/porter.h index e34cd05..929eede 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 /* i2c */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SH #define CONFIG_SYS_I2C_SLAVE 0x7F @@ -91,7 +90,6 @@ /* SD */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_SH_SDHI_FREQ 97500000 diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 1af9ef7..9b394dd 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -10,14 +10,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 5 - /* * Memory Settings */ @@ -58,7 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) - /* * Network Settings */ @@ -70,13 +66,11 @@ #define CONFIG_HOSTNAME pr1 #define CONFIG_TFTP_BLOCKSIZE 4404 - /* * Flash Settings */ #define CONFIG_SYS_NO_FLASH /* We have no parallel FLASH */ - /* * SPI Settings */ @@ -84,7 +78,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -94,14 +87,12 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * NAND Settings */ diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h index 7295687..375515e 100644 --- a/include/configs/pxa-common.h +++ b/include/configs/pxa-common.h @@ -26,8 +26,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 145a933..7450a1a 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -40,7 +40,6 @@ #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 - #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 #undef CONFIG_SPL_NET_SUPPORT @@ -51,7 +50,6 @@ #define CONFIG_FACTORYSET - /* Watchdog */ #define CONFIG_OMAP_WATCHDOG diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 5a043d5..a7cd003 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -45,9 +45,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_DHCP #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_NE2000_BASE 0xb4000300 @@ -75,17 +72,8 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Monitor Command Prompt */ -#undef CONFIG_SYS_PROMPT -#if defined(CONFIG_SYS_LITTLE_ENDIAN) -#define CONFIG_SYS_PROMPT "qemu-mipsel # " -#else -#define CONFIG_SYS_PROMPT "qemu-mips # " -#endif - #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 070b5de..394382c 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -45,9 +45,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_DHCP #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 @@ -70,24 +67,13 @@ #define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_CMD_RARP - /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Monitor Command Prompt */ -#undef CONFIG_SYS_PROMPT -#if defined(CONFIG_SYS_LITTLE_ENDIAN) -#define CONFIG_SYS_PROMPT "qemu-mips64el # " -#else -#define CONFIG_SYS_PROMPT "qemu-mips64 # " -#endif - #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 293684e..73b3771 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -113,10 +113,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. @@ -132,7 +128,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_LBA48 #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 /* * Environment @@ -146,11 +141,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * Command line configuration. */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING #ifdef CONFIG_PCI #define CONFIG_CMD_PCI diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index b1d79fd..437ea92 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -18,8 +18,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_CMD_SDRAM #define CONFIG_CMD_ENV @@ -46,9 +44,7 @@ # define CONFIG_SMC911X_BASE (0x84000000) #endif - /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SH_SH7734_I2C 1 #define CONFIG_HARD_I2C 1 #define CONFIG_I2C_MULTI_BUS 1 diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 82e7a89..bf81d2b 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -11,11 +11,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_CMD_SH_ZIMAGEBOOT diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index e2da244..6097dc2 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -21,9 +21,7 @@ */ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_SCIF_CONSOLE 1 diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index d9dde9c..47d2379 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -36,7 +36,6 @@ "led5=63,0,1\0" #undef CONFIG_DOS_PARTITION -#undef CONFIG_CMD_FAT #define CONFIG_BOARD_LATE_INIT @@ -70,8 +69,6 @@ #define CONFIG_ENV_SIZE_REDUND 0x2000 #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) - - #define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V3 #ifndef CONFIG_SPL_BUILD @@ -99,7 +96,6 @@ "run nand_boot_backup;" \ "reset;" - #else #define CONFIG_BOOTDELAY 0 diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 6bc33e0..337ba02 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -15,17 +15,6 @@ #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE #define CONFIG_SYS_THUMB_BUILD diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index 368d046..1bdcf9d 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -45,36 +45,24 @@ /* MMC/SD IP block */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC #define CONFIG_SDHCI #define CONFIG_DWMMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FS_GENERIC #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_TIME - #define CONFIG_SYS_SDRAM_BASE 0x60000000 #define CONFIG_NR_DRAM_BANKS 1 #define SDRAM_BANK_SIZE (512UL << 20UL) #define CONFIG_SPI_FLASH #define CONFIG_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI #define CONFIG_SPI_FLASH_GIGADEVICE #define CONFIG_SF_DEFAULT_SPEED 20000000 -#define CONFIG_CMD_I2C - #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 5322685..8a81397 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -51,17 +51,12 @@ /* MMC/SD IP block */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC #define CONFIG_SDHCI #define CONFIG_DWMMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FS_GENERIC #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART @@ -78,22 +73,14 @@ #define CONFIG_SPL_RAM_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_TIME -#define CONFIG_CMD_GPIO - #define CONFIG_SYS_SDRAM_BASE 0 #define CONFIG_NR_DRAM_BANKS 1 #define SDRAM_BANK_SIZE (2UL << 30) #define CONFIG_SPI_FLASH #define CONFIG_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI #define CONFIG_SF_DEFAULT_SPEED 20000000 -#define CONFIG_CMD_I2C - #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> diff --git a/include/configs/rpi.h b/include/configs/rpi.h index b83d622..af58182 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -48,7 +48,11 @@ /* Memory layout */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x00000000 +#ifdef CONFIG_ARM64 +#define CONFIG_SYS_TEXT_BASE 0x00080000 +#else #define CONFIG_SYS_TEXT_BASE 0x00008000 +#endif #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE /* * The board really has 256M. However, the VC (VideoCore co-processor) shares @@ -92,7 +96,6 @@ #define CONFIG_MMC_SDHCI_IO_ACCESSORS #define CONFIG_BCM2835_SDHCI -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2 #ifndef CONFIG_BCM2835 @@ -141,7 +144,6 @@ #define CONFIG_COMMAND_HISTORY /* Commands */ -#define CONFIG_CMD_MMC #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index 039880b..1e4166c 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -14,9 +14,7 @@ #define CONFIG_CPU_SH7203 1 #define CONFIG_RSK7203 1 -#define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_CACHE #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC0,115200" diff --git a/include/configs/rut.h b/include/configs/rut.h index cf018e0..bf2cc2f 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -45,7 +45,6 @@ #define CONFIG_FACTORYSET - /* Watchdog */ #define WATCHDOG_TRIGGER_GPIO 14 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 07a5134..afea884 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -62,15 +62,11 @@ #define CONFIG_SYS_NO_FLASH 1 -#define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND -#define CONFIG_CMD_MMC -#define CONFIG_CMD_DFU #define CONFIG_CMD_GPT /* USB Composite download gadget - g_dnl */ -#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M @@ -81,13 +77,11 @@ #define CONFIG_USB_FUNCTION_THOR /* USB Samsung's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM + +#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 -#define CONFIG_G_DNL_MANUFACTURER "Samsung" /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define MTDIDS_DEFAULT "onenand0=samsung-onenand" @@ -198,7 +192,6 @@ "dfu_alt_info=" CONFIG_DFU_ALT "\0" #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -235,10 +228,6 @@ #define CONFIG_DOS_PARTITION 1 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE - /* write support for filesystems */ #define CONFIG_FAT_WRITE #define CONFIG_EXT4_WRITE @@ -270,11 +259,7 @@ #define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_MAX_I2C_BUS 7 -#define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DWC2_OTG_PHY -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #endif /* __CONFIG_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index ed5365a..bdb368e 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -162,8 +162,6 @@ #define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7 #define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6 -#define CONFIG_CMD_I2C - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ #define CONFIG_SYS_I2C_SOFT_SPEED 50000 @@ -176,9 +174,7 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_MAX8998 -#define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DWC2_OTG_PHY -#define CONFIG_USB_GADGET_DUALSPEED /* * SPI Settings diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 1225aa8..f9a8f6f 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -51,7 +51,6 @@ #undef CONFIG_CMD_NAND /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC @@ -64,7 +63,6 @@ #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI @@ -74,14 +72,11 @@ #endif /* USB device */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2 XPlained" #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 73de62c..55615ea 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -77,11 +77,9 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY #define CONFIG_RGMII -#define CONFIG_CMD_MII #define CONFIG_PHYLIB /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC @@ -91,7 +89,6 @@ #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL @@ -106,10 +103,7 @@ #endif #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index ed6bafb..1e721a9 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -76,7 +76,6 @@ #endif /* SerialFlash */ -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI @@ -109,13 +108,11 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY #define CONFIG_RGMII -#define CONFIG_CMD_MII #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL #define CONFIG_PHY_MICREL_KSZ9021 /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC @@ -125,7 +122,6 @@ #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL @@ -140,14 +136,11 @@ #endif /* USB device */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D3xEK" #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE #endif diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index d89609b..8d141a9 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* SerialFlash */ -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI @@ -63,7 +62,6 @@ #endif /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC @@ -73,7 +71,6 @@ #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI @@ -83,14 +80,11 @@ #endif /* USB device */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 3981c23..4b19080 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* SerialFlash */ -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI @@ -63,7 +62,6 @@ #endif /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC @@ -73,7 +71,6 @@ #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI @@ -83,14 +80,11 @@ #endif /* USB device */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index cc22467..9790a14 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -29,7 +29,6 @@ #define CONFIG_SANDBOX_BITS_PER_LONG 64 #define CONFIG_LMB -#define CONFIG_CMD_FDT #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_CMD_PCI @@ -40,18 +39,13 @@ #define CONFIG_FAT_WRITE #define CONFIG_FS_EXT4 #define CONFIG_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_CBFS #define CONFIG_CMD_CRAMFS #define CONFIG_CMD_PART #define CONFIG_DOS_PARTITION #define CONFIG_HOST_MAX_DEVICES 4 -#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_MD5SUM - #define CONFIG_CMD_GPT #define CONFIG_PARTITION_UUIDS #define CONFIG_AMIGA_PARTITION @@ -66,7 +60,6 @@ #define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */ -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* #undef to save memory */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SILENT_CONSOLE @@ -84,11 +77,8 @@ #define CONFIG_ENV_IS_NOWHERE /* SPI - enable all SPI flash types for testing purposes */ -#define CONFIG_CMD_SF #define CONFIG_CMD_SF_TEST -#define CONFIG_CMD_SPI -#define CONFIG_CMD_I2C #define CONFIG_I2C_EDID #define CONFIG_I2C_EEPROM @@ -126,12 +116,7 @@ #define CONFIG_KEEP_SERVERADDR #define CONFIG_UDP_CHECKSUM -#define CONFIG_CMD_LINK_LOCAL -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DNS -#define CONFIG_CMD_SNTP #define CONFIG_TIMESTAMP -#define CONFIG_CMD_RARP #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME @@ -149,8 +134,6 @@ #define CONFIG_CMD_ENV_FLAGS #define CONFIG_CMD_ENV_CALLBACK -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_ASKENV #define CONFIG_BOOTARGS "" @@ -207,7 +190,6 @@ #define CONFIG_LZMA #define CONFIG_CMD_LZMADEC -#define CONFIG_CMD_USB #define CONFIG_CMD_DATE #endif diff --git a/include/configs/sansa_fuze_plus.h b/include/configs/sansa_fuze_plus.h index 8088359..0c8ecc1 100644 --- a/include/configs/sansa_fuze_plus.h +++ b/include/configs/sansa_fuze_plus.h @@ -14,14 +14,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_VIDEO -#define CONFIG_CMD_MEMTEST /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ @@ -54,9 +47,6 @@ #define CONFIG_EHCI_MXS_PORT0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ -#define CONFIG_USB_GADGET_DUALSPEED - #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_CDC #define CONFIG_NETCONSOLE diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index b74a268..6c0932a 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -279,8 +279,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER /* I2C */ #define CONFIG_SYS_I2C @@ -397,7 +395,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -406,13 +403,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -526,7 +519,6 @@ HID0_ENABLE_M_BIT |\ HID0_ENABLE_ADDRESS_BROADCAST) */ - #define CONFIG_SYS_HID2 HID2_HBE #define CONFIG_HIGH_BATS 1 /* High BATs supported */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 56c197c..bbd1a63 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -13,7 +13,6 @@ #ifndef __CONFIG_H #define __CONFIG_H - /* * Top level Makefile configuration choices */ @@ -416,9 +415,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* * I2C */ @@ -475,7 +471,6 @@ #endif /* CONFIG_PCI */ - #if defined(CONFIG_TSEC_ENET) #define CONFIG_MII 1 /* MII PHY management */ @@ -525,20 +520,15 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -618,7 +608,6 @@ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" - #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index b7238fb..f34cef5 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -20,7 +20,6 @@ #ifndef __CONFIG_H #define __CONFIG_H - /* High Level Configuration Options */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_SBC8641D 1 /* SBC8641D board specific */ @@ -67,7 +66,6 @@ #define BANK_INTERLEAVING 0x22000000 #define SUPER_BANK_INTERLEAVING 0x23000000 - #define CONFIG_ALTIVEC 1 /* @@ -173,7 +171,6 @@ #define CONFIG_SYS_DDR2_CLK_CTRL 0x03800000 #define CONFIG_SYS_DDR2_CFG_1B 0xC3008008 - #endif /* #define CONFIG_ID_EEPROM 1 @@ -257,11 +254,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - /* * I2C */ @@ -472,8 +464,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index 6642b3f..42237d3 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -19,15 +19,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 0611213..4c01966 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -30,13 +30,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -48,14 +46,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP /* Enable keyboard */ #define CONFIG_TEGRA_KEYBOARD diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h index 703f4fc..51b88a4 100644 --- a/include/configs/secomx6quq7.h +++ b/include/configs/secomx6quq7.h @@ -32,9 +32,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* Ethernet Configuration */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -73,7 +70,6 @@ "stdout=serial\0" \ "stderr=serial\0" - /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index f32459b..d34811f 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -230,13 +230,11 @@ */ #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DTT -#define CONFIG_CMD_FAT #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM #ifdef CONFIG_440EPX -#define CONFIG_CMD_USB #endif #ifndef CONFIG_RAINIER diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index fc9d246..80997a4 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -16,15 +16,10 @@ #define CONFIG_SYS_TEXT_BASE 0x5ff80000 #define CONFIG_SYS_LDSCRIPT "board/renesas/sh7752evb/u-boot.lds" -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SF #define CONFIG_CMD_MD5SUM #define CONFIG_MD5 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h index 31dd984..248435b 100644 --- a/include/configs/sh7753evb.h +++ b/include/configs/sh7753evb.h @@ -16,15 +16,10 @@ #define CONFIG_SYS_TEXT_BASE 0x5ff80000 #define CONFIG_SYS_LDSCRIPT "board/renesas/sh7753evb/u-boot.lds" -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SF #define CONFIG_CMD_MD5SUM #define CONFIG_MD5 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index 26d70f4..547b500 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -17,14 +17,9 @@ #define CONFIG_SYS_TEXT_BASE 0x8ef80000 #define CONFIG_SYS_LDSCRIPT "board/renesas/sh7757lcr/u-boot.lds" -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SF #define CONFIG_CMD_MD5SUM #define CONFIG_MD5 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 0fd2caf..9f1e6d7 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -18,8 +18,6 @@ * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_JFFS2 #define CONFIG_BOOTDELAY -1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index e85256d..bd4c6bd 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -14,14 +14,10 @@ #define CONFIG_SH7785LCR 1 #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SH_ZIMAGEBOOT -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION @@ -71,7 +67,6 @@ #undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE - #define CONFIG_SYS_MEMTEST_START (SH7785LCR_SDRAM_BASE) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ (SH7785LCR_SDRAM_SIZE) - \ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index f9fb9bc..fa76a25 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -10,7 +10,6 @@ #ifndef _CONFIG_SHEEVAPLUG_H #define _CONFIG_SHEEVAPLUG_H - /* * Version number information */ @@ -25,7 +24,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_MMC /* * Standard filesystems diff --git a/include/configs/shmin.h b/include/configs/shmin.h index 11ae15c..897ba1d 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -16,7 +16,6 @@ /* #define CONFIG_T_SH7706LSR 1 */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_PING #define CONFIG_CMD_ENV #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index df2a514..dfc928d 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -26,8 +26,6 @@ #define CONFIG_ENV_SIZE (0x2000) #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_NO_FLASH #ifdef CONFIG_SIEMENS_MACH_TYPE @@ -41,10 +39,6 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 /* commands to include */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_TIME - #define CONFIG_ENV_VARS_UBOOT_CONFIG #ifndef CONFIG_SPL_BUILD @@ -89,15 +83,11 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_SPI #define CONFIG_OMAP3_SPI #define CONFIG_MTD_DEVICE -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED (75000000) /* Physical Memory Map */ @@ -126,7 +116,6 @@ /* I2C Configuration */ #define CONFIG_I2C -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 @@ -221,19 +210,15 @@ */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_GADGET #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #undef CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST #ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif @@ -243,18 +228,12 @@ #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" #endif /* CONFIG_USB_MUSB_GADGET */ -#define CONFIG_USB_GADGET_DOWNLOAD - /* USB DRACO ID as default */ #define CONFIG_USBD_HS -#define CONFIG_G_DNL_VENDOR_NUM 0x0908 -#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 -#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" /* USB Device Firmware Update support */ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND -#define CONFIG_CMD_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) #define DFU_MANIFEST_POLL_TIMEOUT 25000 @@ -283,13 +262,10 @@ /* Unsupported features */ #undef CONFIG_USE_IRQ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII #define CONFIG_PHY_GIGE #define CONFIG_PHYLIB -#define CONFIG_CMD_MII #define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 @@ -501,7 +477,6 @@ "512k(mtdoops)," \ "-(rootfs)" - #define DFU_ALT_INFO_NAND_V2 \ "spl part 0 1;" \ "spl.backup1 part 0 2;" \ @@ -593,7 +568,6 @@ "512k(mtdoops)," \ "-(configuration)" - #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ @@ -623,7 +597,4 @@ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_ENV -/* Enable Device-Tree (FDT) support */ -#define CONFIG_CMD_FDT - #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ diff --git a/include/configs/silk.h b/include/configs/silk.h index 93c3d0d..dca0623 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 /* i2c */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SH #define CONFIG_SYS_I2C_SLAVE 0x7F @@ -92,7 +91,6 @@ /* MMCIF */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC #define CONFIG_SH_MMCIF #define CONFIG_SH_MMCIF_ADDR 0xee200000 #define CONFIG_SH_MMCIF_CLK 48000000 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index db820ba..40b0cd2 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -56,8 +56,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_SMARTWEB #define CONFIG_AUTO_COMPLETE #define CONFIG_ENV_OVERWRITE 1 /* Overwrite ethaddr / serial# */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_AUTOLOAD "yes" #define CONFIG_RESET_TO_RETRY @@ -151,7 +149,6 @@ #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ -#define CONFIG_CMD_USB #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW @@ -172,19 +169,11 @@ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define DFU_MANIFEST_POLL_TIMEOUT 25000 -/* USB DFU IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0908 -#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 -#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" - #define CONFIG_SYS_CACHELINE_SIZE 0x2000 #endif @@ -223,25 +212,13 @@ "mtdparts="MTDPARTS_DEFAULT"\0" /* Command line & features configuration */ -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_NAND -#define CONFIG_CMD_FAT #ifdef CONFIG_MACB -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP #else -# undef CONFIG_CMD_BOOTD -# undef CONFIG_CMD_NET -# undef CONFIG_CMD_NFS #endif /* CONFIG_MACB */ -#define CONFIG_CMD_FDT - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_INIT_SP_ADDR 0x301000 #define CONFIG_SPL_STACK_R @@ -256,7 +233,6 @@ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) #endif - /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x0 diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 9947dc0..c5c0c2c 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -23,7 +23,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 - #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH /* input clock of PLL (the SMDK2410 has 12MHz input clock) */ @@ -60,7 +59,6 @@ ************************************************************/ #define CONFIG_RTC_S3C24X0 - #define CONFIG_BAUDRATE 115200 /* @@ -75,15 +73,10 @@ * Command line configuration. */ #define CONFIG_CMD_BSP -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_USB -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING /* autoboot */ @@ -176,8 +169,6 @@ /* * File system */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_MTDPARTS diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index d52f500..0f1a1ec 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -67,10 +67,8 @@ ***********************************************************/ #undef CONFIG_CMD_NAND -#define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND -#define CONFIG_CMD_FAT #define CONFIG_CMD_MTDPARTS #define CONFIG_BOOTDELAY 3 @@ -152,7 +150,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 856bf7d..efb18ff 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -14,10 +14,8 @@ #undef CONFIG_BOARD_COMMON #undef CONFIG_USB_GADGET_DWC2_OTG #undef CONFIG_USB_GADGET_DWC2_OTG_PHY -#undef CONFIG_CMD_USB_MASS_STORAGE #undef CONFIG_REVISION_TAG #undef CONFIG_CMD_THOR_DOWNLOAD -#undef CONFIG_CMD_DFU /* High Level Configuration Options */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ @@ -41,9 +39,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - /* MMC SPL */ #define CONFIG_SKIP_LOWLEVEL_INIT #define COPY_BL2_FNPTR_ADDR 0x00002488 diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index a708c68..16aefc2 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -140,18 +140,11 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER /* U-Boot memory settings */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Command line configuration */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_USB -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 18a379d..fb348a5 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -88,8 +88,6 @@ #define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_I2C_MULTI_BUS -#define CONFIG_CMD_I2C - /* * Flash */ @@ -104,8 +102,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC - /* * Power */ @@ -169,7 +165,6 @@ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_CBSIZE 512 @@ -201,19 +196,6 @@ #define CONFIG_USB_MUSB_OMAP2PLUS #define CONFIG_TWL4030_USB -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 - -/* - * Download - */ - -#define CONFIG_USB_GADGET_DOWNLOAD - -#define CONFIG_G_DNL_VENDOR_NUM 0x0451 -#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" - /* * Fastboot */ diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h index 153f9f8..ca7f8a2 100644 --- a/include/configs/socfpga_arria5_socdk.h +++ b/include/configs/socfpga_arria5_socdk.h @@ -14,22 +14,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DFU -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_USB_MASS_STORAGE - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 3e50892..4fdc09a 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -6,7 +6,6 @@ #ifndef __CONFIG_SOCFPGA_COMMON_H__ #define __CONFIG_SOCFPGA_COMMON_H__ - /* Virtual target or real hardware */ #undef CONFIG_SOCFPGA_VIRTUAL_TARGET @@ -68,7 +67,6 @@ #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ #define CONFIG_AUTO_COMPLETE /* Command auto complete */ #define CONFIG_CMDLINE_EDITING /* Command history etc */ -#define CONFIG_SYS_HUSH_PARSER #ifndef CONFIG_SYS_HOSTNAME #define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD @@ -90,8 +88,6 @@ * EPCS/EPCQx1 Serial Flash Controller */ #ifdef CONFIG_ALTERA_SPI -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 30000000 /* * The base address is configurable in QSys, each board must specify the @@ -198,7 +194,6 @@ unsigned int cm_get_l4_sp_clk_hz(void); #define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000) #endif -#define CONFIG_CMD_I2C /* * QSPI support @@ -217,12 +212,10 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() #endif #define CONFIG_CQSPI_DECODER 0 -#define CONFIG_CMD_SF /* * Designware SPI support */ -#define CONFIG_CMD_SPI /* * Serial Driver @@ -250,12 +243,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); * USB Gadget (DFU, UMS) */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) -#define CONFIG_USB_GADGET_DWC2_OTG -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 - -/* USB Composite download gadget - g_dnl */ -#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_FUNCTION_DFU @@ -266,13 +253,8 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define DFU_DEFAULT_POLL_TIMEOUT 300 /* USB IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */ -#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */ -#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM -#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM -#ifndef CONFIG_G_DNL_MANUFACTURER -#define CONFIG_G_DNL_MANUFACTURER CONFIG_SYS_VENDOR -#endif +#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #endif /* diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h index d7c339e..a2da7d4 100644 --- a/include/configs/socfpga_cyclone5_socdk.h +++ b/include/configs/socfpga_cyclone5_socdk.h @@ -14,22 +14,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DFU -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_USB_MASS_STORAGE - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h index 314b9bf..fdddfa3 100644 --- a/include/configs/socfpga_de0_nano_soc.h +++ b/include/configs/socfpga_de0_nano_soc.h @@ -14,22 +14,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DFU -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_USB_MASS_STORAGE - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index f260a64..f0fb43a 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -14,22 +14,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DFU -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_USB_MASS_STORAGE - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on MCV */ diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h index 07cfcbf..675f5d1 100644 --- a/include/configs/socfpga_sockit.h +++ b/include/configs/socfpga_sockit.h @@ -14,22 +14,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DFU -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_USB_MASS_STORAGE - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ diff --git a/include/configs/socfpga_socrates.h b/include/configs/socfpga_socrates.h index 02ea0c5..79c16ce 100644 --- a/include/configs/socfpga_socrates.h +++ b/include/configs/socfpga_socrates.h @@ -14,22 +14,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DFU -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_USB_MASS_STORAGE - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCrates */ diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index e43b5cf..efa9e42 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -16,25 +16,6 @@ #define CONFIG_HW_WATCHDOG -/* U-Boot Commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MEMTEST -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TIME - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 62be008..4ed524b 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -207,8 +207,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ - /* * I2C @@ -258,7 +256,6 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ - #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1 1 #define CONFIG_TSEC1_NAME "TSEC0" @@ -296,7 +293,6 @@ #define CONFIG_TIMESTAMP /* Print image info with ts */ - /* * BOOTP options */ @@ -305,22 +301,14 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #define CONFIG_CMD_BMP #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #undef CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_I2C #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) @@ -356,7 +344,6 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ #endif - #define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/ #define CONFIG_BOOTDELAY 1 /* -1 disables auto-boot */ diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index a309448..c4b6234 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -11,7 +11,6 @@ * Common configurations used for both spear3xx as well as spear6xx */ - /* U-Boot Load Address */ #define CONFIG_SYS_TEXT_BASE 0x00700000 @@ -99,13 +98,9 @@ /* * Command support defines */ -#define CONFIG_CMD_I2C #define CONFIG_CMD_NAND #define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP /* * Default Environment Varible definitions @@ -179,7 +174,6 @@ "console=ttyAMA0,115200 $(othbootargs);" \ CONFIG_BOOTCOMMAND - #define CONFIG_ENV_SIZE 0x02000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 05e2363..d53f8c1 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -89,11 +89,9 @@ * Command line configuration. */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_MEM -#define CONFIG_CMD_TIMER #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 807ab65..9d1f02e 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_THUMB_BUILD /*#define CONFIG_SYS_NO_FLASH*/ -#define CONFIG_OF_LIBFDT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_FLASH_BASE 0x08000000 @@ -76,11 +75,8 @@ * Command line configuration. */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_MEM -#define CONFIG_CMD_TIMER -#undef CONFIG_CMD_IMLS #endif /* __CONFIG_H */ diff --git a/include/configs/stout.h b/include/configs/stout.h index 70fedf1..d21c3cb 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -94,7 +94,6 @@ /* MMC */ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC /* Module stop status bits */ diff --git a/include/configs/strider.h b/include/configs/strider.h index d5f1981..5803b66 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -35,12 +35,9 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_CMD_FPGAD @@ -313,9 +310,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Pass open firmware flat tree */ /* I2C */ @@ -510,10 +504,7 @@ int fpga_gpio_get(unsigned int bus, int pin); /* * Command line configuration. */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ @@ -643,5 +634,4 @@ int fpga_gpio_get(unsigned int bus, int pin); #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index 375159e..d3704a4 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -57,12 +57,10 @@ #define CONFIG_PHY_MICREL /* Command support defines */ -#define CONFIG_CMD_PING #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ #define CONFIG_SYS_MEMTEST_START 0x0000 #define CONFIG_SYS_MEMTEST_END 1024*1024 -#define CONFIG_CMD_MEMTEST /* Misc configuration */ #define CONFIG_SYS_LONGHELP @@ -77,9 +75,7 @@ #ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ #define CONFIG_CQSPI_DECODER 0 #define CONFIG_CQSPI_REF_CLK ((30/4)/2)*1000*1000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #endif #endif /* __CONFIG_H */ diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index bf1b740..b9a8731 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -26,7 +26,6 @@ #define CONFIG_SUNXI_USB_PHYS 2 #endif - #ifndef CONFIG_MACH_SUN8I_A83T #define CONFIG_ARMV7_PSCI 1 #if defined(CONFIG_MACH_SUN8I_A23) diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 8f11eb9..2406115 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -140,7 +140,6 @@ /* mmc config */ #ifdef CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC #define CONFIG_MMC_SUNXI #define CONFIG_MMC_SUNXI_SLOT 0 #define CONFIG_ENV_IS_IN_MMC @@ -236,7 +235,6 @@ #define CONFIG_SYS_I2C_MVTWSI #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_SLAVE 0x7f -#define CONFIG_CMD_I2C #endif #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) @@ -342,23 +340,12 @@ extern int soft_i2c_gpio_scl; #endif #ifdef CONFIG_USB_MUSB_GADGET -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 - -#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_FUNCTION_DFU #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_USB_FUNCTION_MASS_STORAGE #endif -#ifdef CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_G_DNL_VENDOR_NUM 0x1f3a -#define CONFIG_G_DNL_PRODUCT_NUM 0x1010 -#define CONFIG_G_DNL_MANUFACTURER "Allwinner Technology" -#endif - #ifdef CONFIG_USB_FUNCTION_DFU -#define CONFIG_CMD_DFU #define CONFIG_DFU_RAM #endif @@ -377,7 +364,6 @@ extern int soft_i2c_gpio_scl; #endif #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_CMD_USB_MASS_STORAGE #endif #ifdef CONFIG_USB_KEYBOARD diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 1ac54e2..64e200e 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -372,7 +372,6 @@ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - /* * External Bus Controller (EBC) Setup */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index ca6d285..af61f21 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -98,14 +98,12 @@ #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR3 - /* * IFC Definitions */ #define CONFIG_SYS_FLASH_BASE 0xe0000000 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -153,10 +151,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -243,7 +237,6 @@ #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_FMAN_ENET @@ -261,13 +254,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #ifdef CONFIG_PCI #define CONFIG_CMD_PCI @@ -311,7 +299,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 - #define CONFIG_BAUDRATE 115200 #define CONFIG_HVBOOT \ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 59b6c5f..efdc706 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -96,16 +96,7 @@ #define CONFIG_USB_STORAGE /* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_EEPROM #define CONFIG_SYS_NO_FLASH @@ -133,7 +124,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ @@ -321,7 +311,6 @@ "fi;" \ "else echo U-Boot not downloaded..exiting;fi\0" \ - /* * this is common code for all TAM3517 boards. * MAC address is stored from manufacturer in diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 73cd0a0..4d66dd2 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -92,9 +92,6 @@ #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ /* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nand0=nand" @@ -102,11 +99,7 @@ "1920k(u-boot),128k(u-boot-env),"\ "4m(kernel),-(fs)" -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C @@ -192,7 +185,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* turn on command-line edit/hist/auto */ @@ -277,7 +269,6 @@ */ /* USB EHCI */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162 diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 5b190f6..321fb47 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -22,7 +22,6 @@ #include <asm/hardware.h> #include <linux/sizes.h> - #if defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_ICACHE_OFF @@ -35,7 +34,6 @@ * hex number here! */ - #define CONFIG_SYS_TEXT_BASE 0x21000000 /* ARM asynchronous clock */ @@ -51,8 +49,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMD_BOOTZ - /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -69,8 +65,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND /* @@ -135,27 +129,16 @@ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ -#define CONFIG_CMD_USB -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 -/* USB DFU IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0908 -#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 -#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" - #define CONFIG_SYS_CACHELINE_SIZE SZ_8K #endif /* SPI EEPROM */ #define CONFIG_SPI -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_ATMEL_SPI #define TAURUS_SPI_MASK (1 << 4) #define TAURUS_SPI_CS_PIN AT91_PIN_PA3 @@ -311,7 +294,6 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } - #define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 #define AT91_PLL_LOCK_TIMEOUT 1000000 diff --git a/include/configs/tb100.h b/include/configs/tb100.h index 62b9de3..870406b 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -65,8 +65,6 @@ /* * Command line configuration */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 16 diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 1b5046a..ec0bf05 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -56,8 +56,6 @@ /* *** Command definition *** */ #define CONFIG_CMD_BMODE -#define CONFIG_CMD_MEMTEST -#define CONFIG_CMD_TIME /* Filesystems / image support */ #define CONFIG_EFI_PARTITION @@ -69,9 +67,6 @@ /* Ethernet */ #define CONFIG_FEC_MXC -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -118,7 +113,6 @@ #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 @@ -126,17 +120,9 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB_MASS_STORAGE #ifdef CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_CI_UDC #define CONFIG_USBD_HS #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 -#define CONFIG_G_DNL_MANUFACTURER "TBS" #endif /* CONFIG_CMD_USB_MASS_STORAGE */ #define CONFIG_USB_KEYBOARD #ifdef CONFIG_USB_KEYBOARD @@ -155,13 +141,11 @@ /* RTC */ #define CONFIG_CMD_DATE #ifdef CONFIG_CMD_DATE -#define CONFIG_CMD_I2C #define CONFIG_RTC_DS1307 #define CONFIG_SYS_RTC_BUS_NUM 2 #endif /* I2C */ -#define CONFIG_CMD_I2C #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 0f4d959..e017ba9 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf518-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -38,7 +36,6 @@ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 4 - /* * Memory Settings */ @@ -56,7 +53,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) - /* * Network Settings */ @@ -77,7 +73,6 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 19 - /* * SPI Settings */ @@ -85,7 +80,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 - /* * Env Storage Settings */ @@ -96,14 +90,12 @@ #define CONFIG_ENV_SECT_SIZE 0x8000 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * Misc Settings */ diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index fc98d24..c294f70 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -7,14 +7,12 @@ #include <asm/config-pre.h> - /* * Processor Settings */ #define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV @@ -41,7 +39,6 @@ /* Decrease core voltage */ #define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000) - /* * Memory Settings */ @@ -58,7 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) - /* * Network Settings */ @@ -83,14 +79,12 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 67 - /* * SPI Settings */ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 - /* * Env Storage Settings */ @@ -115,14 +109,12 @@ common/env_embedded.o (.text*); #endif - /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI - /* * SPI_MMC Settings */ @@ -148,5 +140,4 @@ */ #include <configs/bfin_adi_common.h> - #endif diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 019e32c..d7f1a7c 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -19,13 +19,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -37,22 +35,18 @@ #define CONFIG_TEGRA_SLINK_CTRLS 6 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX /* General networking support */ -#define CONFIG_CMD_DHCP /* Tag support */ #define CONFIG_CMDLINE_TAG diff --git a/include/configs/tec.h b/include/configs/tec.h index a947214..a90af06 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -23,7 +23,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* NAND support */ #define CONFIG_CMD_NAND @@ -38,14 +37,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX /* General networking support */ -#define CONFIG_CMD_DHCP /* LCD support */ #define CONFIG_SYS_WHITE_ON_BLACK diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index b6b8ffc..b206ce4 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -112,7 +112,6 @@ #undef CONFIG_SYS_I2C_TEGRA #endif #ifdef CONFIG_CMD_I2C -#undef CONFIG_CMD_I2C #endif /* remove MMC support */ @@ -126,7 +125,6 @@ #undef CONFIG_TEGRA_MMC #endif #ifdef CONFIG_CMD_MMC -#undef CONFIG_CMD_MMC #endif /* remove partitions/filesystems */ @@ -136,18 +134,6 @@ #ifdef CONFIG_EFI_PARTITION #undef CONFIG_EFI_PARTITION #endif -#ifdef CONFIG_CMD_FS_GENERIC -#undef CONFIG_CMD_FS_GENERIC -#endif -#ifdef CONFIG_CMD_EXT4 -#undef CONFIG_CMD_EXT4 -#endif -#ifdef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_EXT2 -#endif -#ifdef CONFIG_CMD_FAT -#undef CONFIG_CMD_FAT -#endif #ifdef CONFIG_FS_EXT4 #undef CONFIG_FS_EXT4 #endif @@ -166,7 +152,6 @@ #undef CONFIG_USB_STORAGE #endif #ifdef CONFIG_CMD_USB -#undef CONFIG_CMD_USB #endif /* remove part command support */ diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h index c3a0151..3e3eeea 100644 --- a/include/configs/tegra-common-usb-gadget.h +++ b/include/configs/tegra-common-usb-gadget.h @@ -10,28 +10,13 @@ #ifndef CONFIG_SPL_BUILD /* USB gadget mode support*/ -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_CI_UDC #define CONFIG_CI_UDC_HAS_HOSTPC -#define CONFIG_USB_GADGET_DUALSPEED -#ifndef CONFIG_G_DNL_VENDOR_NUM -#define CONFIG_G_DNL_VENDOR_NUM 0x0955 -#endif -#ifndef CONFIG_G_DNL_PRODUCT_NUM -#define CONFIG_G_DNL_PRODUCT_NUM 0x701A -#endif -#ifndef CONFIG_G_DNL_MANUFACTURER -#define CONFIG_G_DNL_MANUFACTURER "NVIDIA" -#endif -#define CONFIG_USB_GADGET_DOWNLOAD /* USB mass storage protocol */ #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_CMD_USB_MASS_STORAGE /* DFU protocol */ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define CONFIG_SYS_DFU_MAX_FILE_SIZE SZ_32M -#define CONFIG_CMD_DFU #ifdef CONFIG_MMC #define CONFIG_DFU_MMC #endif diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index b07ee56..92d4dd8 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -137,7 +137,6 @@ #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> -#define CONFIG_CMD_EXT4_WRITE #define CONFIG_FAT_WRITE #endif diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 5864f27..1caa858 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -23,16 +23,8 @@ /* * Commands configuration */ -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_I2C #define CONFIG_CMD_SATA -#define CONFIG_CMD_TIME /* * The debugging version enables USB support via defconfig. @@ -40,11 +32,7 @@ * interfaces / features. */ #ifdef CONFIG_USB -#define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SPI -#define CONFIG_CMD_TFTPPUT #endif /* I2C */ @@ -79,9 +67,6 @@ #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_PREBOOT -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* Keep device tree and initrd in lower memory so the kernel can access them */ #define CONFIG_EXTRA_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ diff --git a/include/configs/thuban.h b/include/configs/thuban.h index 4024468..5fed55d 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -29,7 +29,6 @@ "led1=64,0,1\0" #undef CONFIG_DOS_PARTITION -#undef CONFIG_CMD_FAT #define CONFIG_BOARD_LATE_INIT @@ -63,7 +62,6 @@ #define CONFIG_ENV_SIZE_REDUND 0x2000 #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) - #define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 #ifndef CONFIG_SPL_BUILD @@ -91,7 +89,6 @@ "run nand_boot_backup;" \ "reset;" - #else #define CONFIG_BOOTDELAY 0 diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 46d91e2..7c35d8c 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_NO_FLASH - #define CONFIG_IDENT_STRING \ " for Cavium Thunder CN88XX ARM v8 Multi-Core" #define CONFIG_BOOTP_VCI_STRING "Diagnostics" @@ -31,11 +30,9 @@ /* SMP Spin Table Definitions */ #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ - #define CONFIG_SYS_MEMTEST_START MEM_BASE #define CONFIG_SYS_MEMTEST_END (MEM_BASE + PHYS_SDRAM_1_SIZE) @@ -99,7 +96,6 @@ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index f00072e..09f8e8f 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -29,7 +29,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_MALLOC_LEN (1024 << 10) #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* Use HUSH for command parsing */ #define CONFIG_SYS_NO_FLASH #define CONFIG_MACH_TYPE MACH_TYPE_TI8148EVM @@ -38,7 +37,6 @@ #define CONFIG_INITRD_TAG /* for ramdisk support */ /* commands to include */ -#define CONFIG_CMD_ASKENV #define CONFIG_VERSION_VARIABLE #define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ @@ -123,10 +121,7 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 /** * Physical Memory Map @@ -211,9 +206,6 @@ #undef CONFIG_USE_IRQ /* Ethernet */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII #define CONFIG_BOOTP_DNS diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index e09efc7..2e84dd2 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -25,7 +25,6 @@ #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024)) #define CONFIG_SYS_LONGHELP /* undef save memory */ -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -63,10 +62,7 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_FS_FAT @@ -85,7 +81,6 @@ #define CONFIG_TI816X_USE_EMIF0 1 #define CONFIG_TI816X_USE_EMIF1 1 - #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ #define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 4535b8c..bcd56fc 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -30,15 +30,12 @@ #ifndef CONFIG_SPL_BUILD /* Network defines. */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_CMD_PING #define CONFIG_MII /* Required in net/eth.c */ #endif diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 787d04a..2c7d542 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -110,17 +110,14 @@ /* I2C IP block */ #define CONFIG_I2C -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C /* MMC/SD IP block */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_MMC /* McSPI IP block */ #define CONFIG_SPI -#define CONFIG_CMD_SPI /* GPIO block */ @@ -138,7 +135,6 @@ #else #define CONFIG_SYS_MALLOC_LEN (16 << 20) #endif -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_BAUDRATE 115200 #define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ @@ -171,8 +167,6 @@ #define CONFIG_CMD_MTDPARTS #endif -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD /* @@ -181,11 +175,7 @@ */ #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FS_GENERIC #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART #endif @@ -229,8 +219,8 @@ #endif /* RAW SD card / eMMC locations. */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 /* address 0x40000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 /* 384 KB */ /* FAT sd card locations. */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 @@ -305,6 +295,5 @@ #endif #include <config_distro_defaults.h> -#define CONFIG_CMD_EXT4_WRITE #endif /* __CONFIG_TI_ARMV7_COMMON_H__ */ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 41185a1..2c9028c 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -145,8 +145,6 @@ /* SerDes */ #define CONFIG_TI_KEYSTONE_SERDES -/* AEMIF */ -#define CONFIG_TI_AEMIF #define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE /* I2C Configuration */ @@ -207,15 +205,10 @@ #define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE /* U-Boot command configuration */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_NAND #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -#define CONFIG_CMD_SF #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_USB /* U-Boot general configuration */ #define CONFIG_MISC_INIT_R @@ -321,7 +314,6 @@ #undef CONFIG_SPL_EXT_SUPPORT #undef CONFIG_MMC #undef CONFIG_GENERIC_MMC -#undef CONFIG_CMD_MMC /* And no support for GPIO, yet.. */ #undef CONFIG_SPL_GPIO_SUPPORT diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 6a4868c..32877d1 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (64 << 20)) - #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_NAND_BASE 0x30000000 diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 202b18c..b049be4 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -112,7 +112,6 @@ DFUARGS \ NETARGS \ - #define CONFIG_BOOTCOMMAND \ "if test ${dofastboot} -eq 1; then " \ "echo Boot fastboot requested, resetting dofastboot ...;" \ @@ -129,7 +128,6 @@ "" #endif - /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x40300000 and 0x4031E000 as a download area for OMAP5 diff --git a/include/configs/titanium.h b/include/configs/titanium.h index acfa84a..c6ba017 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -30,7 +30,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -42,9 +41,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 1 -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -55,7 +51,6 @@ #define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -164,7 +159,6 @@ /* Enable NAND support */ #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_TIME #ifdef CONFIG_CMD_NAND diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 1fd3f2a..badb955 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -44,21 +44,18 @@ #define CONFIG_MXC_UART /* SPI */ -#define CONFIG_CMD_SPI #define CONFIG_MXC_SPI /* SPI Flash */ #define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 50000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -91,7 +88,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -101,10 +97,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - #define CONFIG_FEC_MXC #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_PHYLIB @@ -287,7 +279,6 @@ "sf read ${${fdt_addr}} ${offset} ${size}; " \ "setenv size ; setenv offset\0" \ - #define CONFIG_BOOTCOMMAND \ "sf probe; run mmcboot; run netboot; run panicboot" \ diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index 450073c..8896bc3 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -38,7 +38,6 @@ #define CONFIG_SYS_RTC_DS1337_NOOSC #define CONFIG_CMD_DATE - /* LED */ #define CONFIG_CMD_LED #define CONFIG_STATUS_LED @@ -71,8 +70,6 @@ * Remove all unused interfaces / commands that are defined in * the common header tqms6.h */ -#undef CONFIG_CMD_SF -#undef CONFIG_CMD_SPI #undef CONFIG_MXC_SPI #endif /* __CONFIG_TQMA6_WRU4_H */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 7caf0ac..0c875cb 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -14,7 +14,6 @@ #define CONFIG_TRATS - #define CONFIG_TIZEN /* TIZEN lib */ #define CONFIG_SYS_L2CACHE_OFF @@ -184,8 +183,6 @@ /* I2C */ #include <asm/arch/gpio.h> -#define CONFIG_CMD_I2C - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 diff --git a/include/configs/trats2.h b/include/configs/trats2.h index a5f6c11..492a253 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -160,8 +160,6 @@ /* I2C */ #include <asm/arch/gpio.h> -#define CONFIG_CMD_I2C - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 915cbd8..855d789 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -41,7 +41,6 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap.h> - /* Display CPU and Board information */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -147,10 +146,6 @@ #define CONFIG_SYS_NAND_MAX_ECCPOS 56 /* commands to include */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ @@ -279,7 +274,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_CMDLINE_EDITING /* enable cmdline history */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index ca188be..b761640 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -23,18 +23,14 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in SPI */ #define CONFIG_ENV_IS_IN_SPI_FLASH @@ -47,7 +43,6 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER @@ -59,7 +54,6 @@ #define CONFIG_CMD_PCI /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-post.h" diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h index fcc9d80..aa0605f 100644 --- a/include/configs/ts4800.h +++ b/include/configs/ts4800.h @@ -55,7 +55,6 @@ * */ #define CONFIG_HARD_SPI /* puts SPI: ready */ #define CONFIG_MXC_SPI /* driver for the SPI controllers*/ -#define CONFIG_CMD_SPI /* SPI serial bus support */ /* * MMC Configs @@ -65,9 +64,7 @@ #define CONFIG_MMC -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* @@ -82,10 +79,6 @@ #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE /* disable vendor parameters protection (serial#, ethaddr) */ #define CONFIG_CONS_INDEX 1 /* use UART0 : used by serial driver */ @@ -95,9 +88,6 @@ * Command definition ***********************************************************/ -#define CONFIG_CMD_BOOTZ -#undef CONFIG_CMD_IMLS - /* Environment variables */ #define CONFIG_BOOTDELAY 1 @@ -135,7 +125,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 901dfd7..b6a1ae0 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -46,7 +46,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_CMD_BOOTZ /*#define CONFIG_MACH_TYPE 3589*/ #define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/ @@ -55,7 +54,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC - #define CONFIG_CMD_MMC #define CONFIG_SUPPORT_EMMC_BOOT /* RAW SD card / eMMC locations. */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ @@ -249,8 +247,6 @@ MMCARGS #define CONFIG_ARCH_MISC_INIT #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -/* attention! not only for gadget, enables also highspeed in hostmode */ -#define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 @@ -301,13 +297,9 @@ MMCARGS */ #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE #define CONFIG_FS_EXT4 #define CONFIG_EXT4_WRITE -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FS_GENERIC #endif /* CONFIG_MMC, ... */ #endif /* ! __CONFIG_TSERIES_H__ */ diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 3d0cafa..fba78d0 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -41,9 +41,6 @@ /* Network support */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index c6fc90f..18cb963 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -71,8 +71,7 @@ /* serial console configuration */ #define CONFIG_BAUDRATE 115200 - -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) #define CONFIG_USE_ARCH_MEMSET #define CONFIG_USE_ARCH_MEMCPY #endif @@ -99,8 +98,18 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 1 +#ifdef CONFIG_ARM64 +#define CONFIG_ARMV8_MULTIENTRY +#define CPU_RELEASE_ADDR 0x80000100 +#define COUNTER_FREQUENCY 50000000 +#define CONFIG_GICV3 +#define GICD_BASE 0x5fe00000 +#define GICR_BASE 0x5fe80000 +#else /* Time clock 1MHz */ #define CONFIG_SYS_TIMER_RATE 1000000 +#endif + #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 @@ -124,12 +133,10 @@ /* USB */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4 -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION /* SD/MMC */ -#define CONFIG_CMD_MMC #define CONFIG_SUPPORT_EMMC_BOOT #define CONFIG_GENERIC_MMC @@ -176,23 +183,36 @@ "bootm $fit_addr_r\0" \ "__nfsboot=run tftpboot\0" #else -#define CONFIG_CMD_BOOTZ +#ifdef CONFIG_ARM64 +#define CONFIG_CMD_BOOTI +#define CONFIG_BOOTFILE "Image" +#define LINUXBOOT_CMD "booti" +#define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" +#define KERNEL_SIZE "kernel_size=0x00c00000\0" +#define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0" +#else #define CONFIG_BOOTFILE "zImage" +#define LINUXBOOT_CMD "bootz" +#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" +#define KERNEL_SIZE "kernel_size=0x00800000\0" +#define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0" +#endif #define LINUXBOOT_ENV_SETTINGS \ "fdt_addr=0x00100000\0" \ "fdt_addr_r=0x84100000\0" \ "fdt_size=0x00008000\0" \ "kernel_addr=0x00200000\0" \ - "kernel_addr_r=0x80208000\0" \ - "kernel_size=0x00800000\0" \ - "ramdisk_addr=0x00a00000\0" \ + KERNEL_ADDR_R \ + KERNEL_SIZE \ + RAMDISK_ADDR \ "ramdisk_addr_r=0x84a00000\0" \ "ramdisk_size=0x00600000\0" \ "ramdisk_file=rootfs.cpio.uboot\0" \ "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ - "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ + LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ - "cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \ + "setexpr kernel_size $kernel_size / 4 &&" \ + "cp $kernel_addr $kernel_addr_r $kernel_size &&" \ "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \ "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \ "run boot_common\0" \ @@ -237,15 +257,24 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_NR_DRAM_BANKS 2 +/* for LD20; the last 64 byte is used for dynamic DDR PHY training */ +#define CONFIG_SYS_MEM_TOP_HIDE 64 -#if defined(CONFIG_ARCH_UNIPHIER_SLD3) || defined(CONFIG_ARCH_UNIPHIER_LD4) || \ +#if defined(CONFIG_ARM64) +#define CONFIG_SPL_TEXT_BASE 0x30000000 +#elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ + defined(CONFIG_ARCH_UNIPHIER_LD4) || \ defined(CONFIG_ARCH_UNIPHIER_SLD8) #define CONFIG_SPL_TEXT_BASE 0x00040000 #else #define CONFIG_SPL_TEXT_BASE 0x00100000 #endif +#if defined(CONFIG_ARCH_UNIPHIER_LD20) +#define CONFIG_SPL_STACK (0x3001c000) +#else #define CONFIG_SPL_STACK (0x00100000) +#endif #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) #define CONFIG_PANIC_HANG @@ -253,8 +282,10 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NOR_SUPPORT +#ifndef CONFIG_ARM64 #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_MMC_SUPPORT +#endif #define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -270,5 +301,7 @@ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 #define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x30016000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 7b2f1ca..d118928 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -59,8 +59,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND /* SDRAM */ @@ -115,7 +113,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 @@ -144,7 +141,6 @@ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 7e24fc6..8568663 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -23,7 +23,6 @@ #include <config_distro_defaults.h> /* U-Boot commands */ -#define CONFIG_CMD_MEMTEST /* U-Boot environment */ #define CONFIG_ENV_OVERWRITE @@ -46,7 +45,6 @@ #define CONFIG_BAUDRATE 115200 /* SD/MMC */ -#define CONFIG_CMD_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_ESDHC_NUM 1 @@ -54,7 +52,6 @@ #define CONFIG_GENERIC_MMC /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_STORAGE @@ -63,7 +60,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* I2C */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index f154208..9a113f4 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -73,7 +73,6 @@ #define CONFIG_USB_CLOCK 0x0001BBBB #define CONFIG_USB_CONFIG 0x00001000 - /* * BOOTP options */ @@ -82,24 +81,15 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C #define CONFIG_CMD_IDE -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_IRQ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_SDRAM #define CONFIG_CMD_DATE -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ diff --git a/include/configs/vct.h b/include/configs/vct.h index ea6e3c0..6489e08 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -83,17 +83,13 @@ /* * Commands */ -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C /* * Only Premium/Platinum have ethernet support right now */ #if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \ !defined(CONFIG_VCT_SMALL_IMAGE) -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP #endif /* @@ -101,8 +97,6 @@ */ #if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \ !defined(CONFIG_VCT_SMALL_IMAGE) -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT #endif #if defined(CONFIG_CMD_USB) @@ -281,24 +275,14 @@ int vct_gpio_get(int pin); * (NOR/OneNAND) usage and Linux kernel booting. */ #if defined(CONFIG_VCT_SMALL_IMAGE) -#undef CONFIG_CMD_ASKENV #undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ #undef CONFIG_CMD_LOADY -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING #undef CONFIG_CMD_REGINFO -#undef CONFIG_CMD_SNTP #undef CONFIG_CMD_STRINGS #undef CONFIG_CMD_TERMINAL -#undef CONFIG_CMD_USB #undef CONFIG_SMC911X #undef CONFIG_SYS_I2C_SOFT diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index de5c3ce..2425ebf 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -256,9 +256,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - #if defined(CONFIG_PCI) /* * General PCI @@ -283,7 +280,6 @@ */ #define CONFIG_TSEC_ENET /* TSEC ethernet support */ - #define CONFIG_TSEC1 #ifdef CONFIG_TSEC1 #define CONFIG_HAS_ETH0 @@ -324,9 +320,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 75f7268..1d24437 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -21,13 +21,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -38,22 +36,18 @@ /* SPI */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_SIZE (4 << 20) /* USB Host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 7f970d0..cdf50e3 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -24,7 +24,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -36,14 +35,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP /* USB keyboard */ #define CONFIG_USB_KEYBOARD diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 31b1a24..1b5fc2e 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -134,15 +134,10 @@ /* Command line configuration */ #define CONFIG_MENU /*#define CONFIG_MENU_SHOW*/ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_BOOTI #define CONFIG_CMD_UNZIP -#define CONFIG_CMD_DHCP #define CONFIG_CMD_PXE #define CONFIG_CMD_ENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION /* BOOTP options */ @@ -172,7 +167,6 @@ #endif /* Enable memtest */ -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) @@ -276,7 +270,6 @@ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING @@ -299,7 +292,6 @@ #define CONFIG_ENV_SECT_SIZE 0x00040000 #endif -#define CONFIG_CMD_ARMFLASH #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT @@ -312,5 +304,4 @@ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_IS_IN_FLASH 1 - #endif /* __VEXPRESS_AEMV8A_H */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index d78ca0b..6dc8f25 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -153,7 +153,6 @@ #define CONFIG_SYS_SERIAL1 V2M_UART1 #define CONFIG_MMC 1 -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_ARM_PL180_MMCI #define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI @@ -186,7 +185,6 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_CMD_ECHO #include <config_distro_defaults.h> @@ -284,7 +282,6 @@ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 0809fbb..b240613 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -77,14 +77,9 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -96,14 +91,12 @@ /* QSPI Configs*/ #ifdef CONFIG_FSL_QSPI -#define CONFIG_CMD_SF #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_SYS_FSL_QSPI_LE #endif /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -224,8 +217,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #undef CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ @@ -233,7 +224,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80010000 #define CONFIG_SYS_MEMTEST_END 0x87C00000 @@ -274,6 +264,4 @@ #define CONFIG_ENV_OFFSET 0x180000 #endif -#define CONFIG_CMD_BOOTZ - #endif diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 5073b9c..35fe9de 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -34,14 +34,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x4000000 - #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* SerialFlash */ -#define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI @@ -55,9 +53,7 @@ #define CONFIG_ENV_SPI_MODE (SPI_MODE_0) #endif - /* MMC */ -#define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_SUPPORT_EMMC_BOOT @@ -76,7 +72,6 @@ #endif /* USB */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI @@ -86,31 +81,25 @@ #endif /* USB device */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_MANUFACTURER "L+G VInCo" #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif /* Ethernet Hardware */ -#define CONFIG_CMD_MII #define CONFIG_PHY_SMSC #define CONFIG_MACB #define CONFIG_RMII #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY - #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_USB_ETHER_RNDIS - #ifdef CONFIG_SYS_USE_SERIALFLASH /* bootstrap + u-boot + env + linux in serial flash */ #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 7433d7e..732d091 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -212,8 +212,6 @@ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER /* I2C */ #define CONFIG_SYS_I2C @@ -349,9 +347,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_DATE #define CONFIG_SYS_RTC_BUS_NUM 0x01 #define CONFIG_SYS_I2C_RTC_ADDR 0x32 diff --git a/include/configs/walnut.h b/include/configs/walnut.h index dd6b519..d07b74f 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -56,7 +56,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP #define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 8fb0abc..99f5c0c 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -48,7 +47,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -57,9 +55,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Ethernet Configuration */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR diff --git a/include/configs/warp.h b/include/configs/warp.h index cb93629..4a8e270 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -63,7 +63,6 @@ #define CONFIG_SYS_SD_VOLTAGE 0x00000080 /* USB Configs */ -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 @@ -74,27 +73,16 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */ #endif -#define CONFIG_CI_UDC #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_G_DNL_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 -#define CONFIG_G_DNL_MANUFACTURER "FSL" - -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 /* I2C Configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index d1404b2..4dfcd28 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -16,7 +16,6 @@ #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) @@ -84,7 +83,6 @@ "fi; " \ "fi" -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) @@ -119,7 +117,6 @@ #define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX7 #define CONFIG_USB_STORAGE @@ -136,7 +133,6 @@ #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET -#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_VBUS_DRAW 2 @@ -146,7 +142,6 @@ #define CONFIG_G_DNL_MANUFACTURER "FSL" /* USB Device Firmware Update support */ -#define CONFIG_CMD_DFU #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M diff --git a/include/configs/whistler.h b/include/configs/whistler.h index ff85964..9c194d5 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -23,13 +23,11 @@ /* I2C */ #define CONFIG_SYS_I2C_TEGRA -#define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC -#define CONFIG_CMD_MMC /* * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes @@ -46,14 +44,12 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -#define CONFIG_CMD_USB /* USB networking support */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX /* General networking support */ -#define CONFIG_CMD_DHCP #include "tegra-common-post.h" diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index caa0434..a4ae304 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -62,7 +62,6 @@ #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 #define CONFIG_RTC_MC13XXX - /* mmc driver */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -84,25 +83,15 @@ /* * Command definition */ -#define CONFIG_CMD_PING #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_DNS #define CONFIG_CMD_NAND -#define CONFIG_CMD_CACHE - -#define CONFIG_CMD_I2C -#define CONFIG_CMD_SPI -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_MXC_GPIO @@ -112,7 +101,6 @@ #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ - /* * Ethernet on SOC (FEC) */ @@ -132,7 +120,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index e9127c3..b81b6ff 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -63,9 +63,6 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ADDR 0 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */ /* @@ -74,7 +71,6 @@ #define CONFIG_SYS_I2C_LPC32XX #define CONFIG_SYS_I2C -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_SPEED 350000 /* @@ -110,8 +106,6 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HUSH_PARSER - #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #define CONFIG_VERSION_VARIABLE @@ -159,7 +153,6 @@ * SSP/SPI/DISPLAY */ -#define CONFIG_CMD_SPI #define CONFIG_LPC32XX_SSP #define CONFIG_LPC32XX_SSP_TIMEOUT 100000 #define CONFIG_CMD_MAX6957 diff --git a/include/configs/x600.h b/include/configs/x600.h index ac477eb..d7da0b2 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -109,22 +109,14 @@ /* * Command support defines */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT #define CONFIG_CMD_FPGA_LOADMK -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -#define CONFIG_CMD_USB #define CONFIG_LZO /* Filesystem support (for USB key) */ @@ -133,9 +125,6 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* * U-Boot Environment placing definitions. */ @@ -155,7 +144,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_LATE_INIT -#define CONFIG_LOOPW /* enable loopw command */ #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index ea815c2..a2822e0 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -69,7 +69,6 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_COMMAND_HISTORY #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SUPPORT_VFAT @@ -85,8 +84,6 @@ #ifdef CONFIG_SYS_COREBOOT #define CONFIG_CMD_CBFS #endif -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE #define CONFIG_PARTITION_UUIDS #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -98,19 +95,13 @@ * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_IO #define CONFIG_CMD_IRQ #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_TIME #define CONFIG_CMD_GETTIME #define CONFIG_CMD_SCSI -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - #define CONFIG_CMD_ZBOOT #define CONFIG_BOOTARGS \ @@ -162,9 +153,7 @@ * FLASH configuration */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_SF #define CONFIG_CMD_SF_TEST -#define CONFIG_CMD_SPI #define CONFIG_SPI /*----------------------------------------------------------------------- @@ -194,14 +183,11 @@ #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_TFTP_TSIZE -#define CONFIG_CMD_DHCP #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -#define CONFIG_CMD_USB - /* Default environment */ #define CONFIG_ROOTPATH "/opt/nfsroot" #define CONFIG_HOSTNAME x86 diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h index aa49c9e..4d68c21 100644 --- a/include/configs/xfi3.h +++ b/include/configs/xfi3.h @@ -14,12 +14,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_VIDEO /* Memory configuration */ @@ -53,9 +47,6 @@ #define CONFIG_EHCI_MXS_PORT0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ -#define CONFIG_USB_GADGET_DUALSPEED - #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_CDC #define CONFIG_NETCONSOLE diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index d01d88b..067cfa6 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -12,7 +12,6 @@ #ifndef __CONFIG_XLX_H #define __CONFIG_XLX_H - /* #define DEBUG #define ET_DEBUG @@ -25,18 +24,12 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /*Cmd*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DIAG #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_MTDPARTS -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_I2C #undef CONFIG_CMD_DTT -#undef CONFIG_CMD_PING -#undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM /*Misc*/ @@ -64,12 +57,10 @@ /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_LOOPW /* enable loopw command */ #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE /* include version env variable */ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) @@ -101,7 +92,6 @@ #define CONFIG_SYS_NO_FLASH #endif -#define CONFIG_OF_LIBFDT 1 #define CONFIG_BAUDRATE 115200 /* The following table includes the supported baudrates */ # define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index f7b4643..fe9c719 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -63,16 +63,10 @@ /* Command line configuration */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION #define CONFIG_MP -#define CONFIG_CMD_MII - /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH @@ -83,14 +77,12 @@ /* SPI */ #ifdef CONFIG_ZYNQ_SPI -# define CONFIG_CMD_SF #endif #if defined(CONFIG_ZYNQ_SDHCI) # define CONFIG_MMC # define CONFIG_GENERIC_MMC # define CONFIG_SDHCI -# define CONFIG_CMD_MMC # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000 # endif @@ -98,7 +90,6 @@ #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB) # define CONFIG_FAT_WRITE -# define CONFIG_CMD_EXT4_WRITE #endif #ifdef CONFIG_NAND_ARASAN @@ -118,26 +109,14 @@ #define CONFIG_USB_XHCI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_XHCI_ZYNQMP -#define CONFIG_USB_DWC3 -#define CONFIG_USB_DWC3_GADGET - -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 #define DFU_DEFAULT_POLL_TIMEOUT 300 #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_RAM -#define CONFIG_G_DNL_VENDOR_NUM 0x03FD -#define CONFIG_G_DNL_PRODUCT_NUM 0x0300 -#define CONFIG_G_DNL_MANUFACTURER "Xilinx" #define CONFIG_USB_CABLE_CHECK -#define CONFIG_CMD_DFU #define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR #define CONFIG_THOR_RESET_OFF @@ -203,7 +182,6 @@ /* I2C */ #if defined(CONFIG_SYS_I2C_ZYNQ) -# define CONFIG_CMD_I2C # define CONFIG_SYS_I2C # define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 # define CONFIG_SYS_I2C_ZYNQ_SLAVE 0 diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index 6f162dc..9838fbf 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -108,11 +108,6 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* * NOR flash configuration */ #define CONFIG_SYS_MAX_FLASH_BANKS 3 @@ -185,17 +180,11 @@ extern void out32(unsigned int, unsigned long); /* * Command configuration */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP /* * Miscellaneous configurable options diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 70af1e1..af02efb 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -226,11 +226,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* * I2C */ #define CONFIG_SYS_I2C @@ -516,25 +511,19 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DS4510 #define CONFIG_CMD_DS4510_INFO #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP /* * Miscellaneous configurable options diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 1972373..d1847ac 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -189,11 +189,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* * I2C */ #define CONFIG_SYS_I2C @@ -302,20 +297,14 @@ /* * Command configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 1be043f..a1c5826 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -225,11 +225,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* * I2C */ #define CONFIG_SYS_I2C @@ -371,23 +366,17 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* * Command configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DS4510 #define CONFIG_CMD_DS4510_INFO #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 0697714..02685ca 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -215,11 +215,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -/* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - #define CONFIG_FDT_FIXUP_PCI_IRQ 1 /* @@ -304,7 +299,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ - /* * Networking options */ @@ -358,23 +352,16 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* * Command configuration. */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB /* * Miscellaneous configurable options diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 9bc536b..4625daf 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -33,7 +33,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ /* I2C configs */ -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ @@ -42,7 +41,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* Miscellaneous configurable options */ -#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) @@ -77,13 +75,9 @@ #define CONFIG_SYS_MMC_ENV_PART 1 /* boot parition */ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */ -#define CONFIG_OF_LIBFDT -#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_BMODE -#define CONFIG_CMD_CACHE /* USB Configs */ -#define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -94,7 +88,6 @@ #define CONFIG_FEC_MXC #define CONFIG_MII -#define CONFIG_CMD_MII #define CONFIG_FEC_ENET_DEV 0 #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x0 diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 0cffab8..03cad10 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -193,9 +193,6 @@ #define CONFIG_CMD_PCI #ifdef CONFIG_440EP - #define CONFIG_CMD_USB - #define CONFIG_CMD_FAT - #define CONFIG_CMD_EXT2 #endif /*----------------------------------------------------------------------- diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 5200e02..fcd7772 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -45,7 +45,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_LZMA /* LZMA compression support */ -#define CONFIG_OF_LIBFDT /* * Serial Console Configuration @@ -60,10 +59,6 @@ * Bootloader Components Configuration */ #define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_SPI -#define CONFIG_CMD_USB -#define CONFIG_CMD_CACHE /* * MMC Card Configuration @@ -73,8 +68,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_PXA_MMC_GENERIC #define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #endif @@ -99,11 +92,6 @@ unsigned char zipitz2_spi_read(void); #endif #endif -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index bd8fdfb..264bb63 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -15,7 +15,6 @@ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0xA0000000 - #define CONFIG_SYS_TIMER_RATE 32768 #define CONFIG_SYS_TIMER_COUNTER \ (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) @@ -76,17 +75,10 @@ /* * Command line configuration. */ -#define CONFIG_CMD_CACHE /* * Additional command */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB - -#define CONFIG_SYS_HUSH_PARSER /* * USB diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 49d9fd0..a3e4aec 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -16,7 +16,6 @@ #endif /* Cache options */ -#define CONFIG_CMD_CACHE #define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_L2CACHE_OFF @@ -55,14 +54,12 @@ /* SPI */ #ifdef CONFIG_ZYNQ_SPI -# define CONFIG_CMD_SF #endif /* QSPI */ #ifdef CONFIG_ZYNQ_QSPI # define CONFIG_SF_DEFAULT_SPEED 30000000 # define CONFIG_SPI_FLASH_ISSI -# define CONFIG_CMD_SF #endif /* NOR */ @@ -86,31 +83,21 @@ # define CONFIG_MMC # define CONFIG_GENERIC_MMC # define CONFIG_SDHCI -# define CONFIG_CMD_MMC # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 #endif #ifdef CONFIG_ZYNQ_USB # define CONFIG_USB_EHCI -# define CONFIG_CMD_USB # define CONFIG_USB_STORAGE # define CONFIG_USB_EHCI_ZYNQ # define CONFIG_EHCI_IS_TDI # define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -# define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ -# define CONFIG_USB_GADGET_DUALSPEED -# define CONFIG_USB_GADGET_DOWNLOAD # define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 # define DFU_DEFAULT_POLL_TIMEOUT 300 # define CONFIG_USB_FUNCTION_DFU # define CONFIG_DFU_RAM -# define CONFIG_USB_GADGET_VBUS_DRAW 2 -# define CONFIG_G_DNL_VENDOR_NUM 0x03FD -# define CONFIG_G_DNL_PRODUCT_NUM 0x0300 -# define CONFIG_G_DNL_MANUFACTURER "Xilinx" # define CONFIG_USB_CABLE_CHECK -# define CONFIG_CMD_DFU # define CONFIG_CMD_THOR_DOWNLOAD # define CONFIG_THOR_RESET_OFF # define CONFIG_USB_FUNCTION_THOR @@ -149,13 +136,8 @@ #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB) # define CONFIG_SUPPORT_VFAT -# define CONFIG_CMD_FAT -# define CONFIG_CMD_EXT2 # define CONFIG_FAT_WRITE # define CONFIG_DOS_PARTITION -# define CONFIG_CMD_EXT4 -# define CONFIG_CMD_EXT4_WRITE -# define CONFIG_CMD_FS_GENERIC #endif #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) @@ -164,7 +146,6 @@ /* I2C */ #if defined(CONFIG_SYS_I2C_ZYNQ) -# define CONFIG_CMD_I2C # define CONFIG_SYS_I2C # define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 # define CONFIG_SYS_I2C_ZYNQ_SLAVE 0 @@ -259,7 +240,6 @@ #define CONFIG_SYS_LOAD_ADDR 0 /* default? */ /* Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE @@ -315,10 +295,6 @@ #define CONFIG_SYS_LDSCRIPT "arch/arm/mach-zynq/u-boot.lds" /* Commands */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_TFTPPUT /* SPL part */ #define CONFIG_CMD_SPL @@ -404,5 +380,4 @@ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE - #endif /* __CONFIG_ZYNQ_COMMON_H */ |