diff options
Diffstat (limited to 'include/configs')
31 files changed, 355 insertions, 23 deletions
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 9841893..d03c05b 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -132,6 +132,9 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ + +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 050054d..3bd43d8 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -69,6 +69,10 @@ CFG_CMD_DOC | \ CFG_CMD_ELF | \ 0 ) + +/* CFG_CMD_DOC required legacy NAND support */ +#define CFG_NAND_LEGACY + #if 0 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \ CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE) diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 6025886..1cca285 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -81,6 +81,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index efc3ada..047e2f1 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -79,6 +79,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 1347f2a..d756f44 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -100,6 +100,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 9d52815..852d94a 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -87,6 +87,9 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 946a0fd..2260327 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -98,6 +98,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index 16a9ea5..1e9a99e 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -178,6 +178,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Miscellaneous configurable options */ diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index a23d7e5..9a98e5c 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -189,6 +189,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Miscellaneous configurable options */ diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index de8f7ae..6613f90 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -284,6 +284,8 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Verbose help from command monitor. */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 4f62b8a..dc40ebc 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -130,6 +130,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index eb627e8..f84e356 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -135,6 +135,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index db2147b..1f01e7b 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -87,6 +87,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /************************************************************** diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index bf4c899..444f721 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -491,6 +491,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 529cb4c..e20e724 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -491,6 +491,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index dc6b15f..e30be09 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -387,6 +387,8 @@ /*****************************************************************************/ +#define CFG_NAND_LEGACY + #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 /* NAND */ diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index d03706e..3a97fbc 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -77,6 +77,7 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 92b2f7c..130beb7 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -79,6 +79,7 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 9668fb0..091b768 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -69,6 +69,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /************************************************************** diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 54ecfa4..dd5d831 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -160,6 +160,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/PM520.h b/include/configs/PM520.h index e73ad51..9c241e6 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -101,6 +101,8 @@ #define ADD_DOC_CMD 0 #else #define ADD_DOC_CMD CFG_CMD_DOC +/* DoC requires legacy NAND for now */ +#define CFG_NAND_LEGACY #endif /* diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 6e5e3bb..88fdb51 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -180,6 +180,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Disk-On-Chip configuration */ diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 982a1f8..37ee977 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -183,6 +183,7 @@ /* * Disk-On-Chip configuration */ +#define CFG_NAND_LEGACY #define CFG_DOC_SHORT_TIMEOUT #define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 7ca827f..88e6db4 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -188,34 +188,34 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +/* + * nand device 1 on dave (PPChameleonEVB) needs more time, + * so we just introduce additional wait in nand_wait(), + * effectively for both devices. + */ +#define PPCHAMELON_NAND_TIMER_HACK + #define CFG_NAND0_BASE 0xFF400000 #define CFG_NAND1_BASE 0xFF000000 +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, CFG_NAND1_BASE } +#define NAND_BIG_DELAY_US 25 +#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ -#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ -#define SECTORSIZE 512 -#define NAND_NO_RB - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 #define CFG_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ #define CFG_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND0_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ #define CFG_NAND1_CE (0x80000000 >> 14) /* our CE is GPIO14 */ +#define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ #define CFG_NAND1_CLE (0x80000000 >> 15) /* our CLE is GPIO15 */ #define CFG_NAND1_ALE (0x80000000 >> 16) /* our ALE is GPIO16 */ -#define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ -#define NAND_DISABLE_CE(nand) do \ +#define MACRO_NAND_DISABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \ @@ -226,9 +226,9 @@ } \ } while(0) -#define NAND_ENABLE_CE(nand) do \ +#define MACRO_NAND_ENABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \ @@ -239,7 +239,7 @@ } \ } while(0) -#define NAND_CTL_CLRALE(nandptr) do \ +#define MACRO_NAND_CTL_CLRALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -252,7 +252,7 @@ } \ } while(0) -#define NAND_CTL_SETALE(nandptr) do \ +#define MACRO_NAND_CTL_SETALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -265,7 +265,7 @@ } \ } while(0) -#define NAND_CTL_CLRCLE(nandptr) do \ +#define MACRO_NAND_CTL_CLRCLE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -278,7 +278,7 @@ } \ } while(0) -#define NAND_CTL_SETCLE(nandptr) do { \ +#define MACRO_NAND_CTL_SETCLE(nandptr) do { \ switch((unsigned long)nandptr) { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \ @@ -289,6 +289,19 @@ } \ } while(0) +#if 0 +#define SECTORSIZE 512 +#define NAND_NO_RB + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 + + + #ifdef NAND_NO_RB /* constant delay (see also tR in the datasheet) */ #define NAND_WAIT_READY(nand) do { \ @@ -303,7 +316,7 @@ #define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) #define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - +#endif /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- @@ -338,16 +351,16 @@ #define CFG_SDRAM_BASE 0x00000000 /* Reserve 256 kB for Monitor */ +/* #define CFG_FLASH_BASE 0xFFFC0000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (256 * 1024) +*/ /* Reserve 320 kB for Monitor */ -/* #define CFG_FLASH_BASE 0xFFFB0000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (320 * 1024) -*/ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 242c837..21945a3 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -326,6 +326,8 @@ /************************************************************ * Disk-On-Chip configuration ************************************************************/ +#define CFG_NAND_LEGACY + #define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ #define CFG_DOC_SHORT_TIMEOUT #define CFG_DOC_SUPPORT_2000 diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index c1c765f..a8454d9 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -183,6 +183,7 @@ */ /* NAND flash support */ +#define CFG_NAND_LEGACY #define CONFIG_MTD_NAND_ECC_JFFS2 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 3ca137e..96f3d26 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -141,6 +141,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index d92f81f..faf855d 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -133,6 +133,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index eacc744..6d32821 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -43,6 +43,7 @@ * 2nd ethernet port you have to "undef" the following define. */ #define CONFIG_BAMBOO_NAND 1 /* enable nand flash support */ +#define CFG_NAND_LEGACY /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/netstar.h b/include/configs/netstar.h new file mode 100644 index 0000000..697796a --- /dev/null +++ b/include/configs/netstar.h @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl + * + * Configuation settings for the TI OMAP NetStar board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/omap1510.h> + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP1510 1 /* which is in a 5910 */ + +/* Input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */ +#define CONFIG_XTAL_FREQ 12000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R /* There is nothing to really init */ +#define BOARD_LATE_INIT /* but we flash the LEDs here */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +/* + * FLASH organization + */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 1 +#if (PHYS_SDRAM_1_SIZE == SZ_32M) +/*#if 1*/ +#define CFG_FLASH_CFI /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER /* Use the common driver */ +#define CFG_FLASH_EMPTY_INFO +#define CFG_MAX_FLASH_SECT 128 +#else +#define PHYS_FLASH_1_SIZE SZ_1M +#define CFG_MAX_FLASH_SECT 19 +#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */ +#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) +#endif + +#define CFG_MONITOR_BASE PHYS_FLASH_1 +#define CFG_MONITOR_LEN SZ_256K + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH +#define ENV_IS_SOLITARY +#define CFG_ENV_ADDR 0x4000 +#define CFG_ENV_SIZE SZ_8K +#define CFG_ENV_SECT_SIZE SZ_8K +#define CFG_ENV_ADDR_REDUND 0x6000 +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE +#define CONFIG_ENV_OVERWRITE + +/* + * Size of malloc() pool + */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +/* XXX #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)*/ +#define CFG_MALLOC_LEN SZ_4M + +/* + * The stack size is set up in start.S using the settings below + */ +/* XXX #define CONFIG_STACKSIZE SZ_8K /XXX* regular stack */ +#define CONFIG_STACKSIZE SZ_1M /* regular stack */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x04000300 + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*#define CONFIG_SKIP_RELOCATE_UBOOT*/ +/*#define CONFIG_SKIP_LOWLEVEL_INIT */ + +/* + * NAND flash + */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE 0x04000000 + (2 << 23) + +/* + * JFFS2 partitions (mtdparts command line support) + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0" +#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)" + +#if 0 +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_LOADB | \ + CFG_CMD_NET | \ + CFG_CMD_MEMORY | \ + CFG_CMD_PING | \ + CFG_CMD_RUN) + +#else +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_NAND | \ + CFG_CMD_IMI | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_LOADB | \ + CFG_CMD_NET | \ + CFG_CMD_MEMORY | \ + CFG_CMD_PING | \ + CFG_CMD_RUN) + +#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +#define CONFIG_LOOPW + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_BOOTCOMMAND "run nboot" +#define CONFIG_PREBOOT "run setup" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "setup=setenv bootargs console=ttyS0,$baudrate " \ + "$mtdparts\0" \ + "ospart=0\0" \ + "setpart=" \ + "if test -n $swapos; then " \ + "if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\ + "setenv swapos; saveenv; " \ + "else " \ + "chpart nand0,$ospart; " \ + "fi\0" \ + "nfsargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ + "nfsroot=$rootpath root=/dev/nfs\0" \ + "flashargs=run setpart;setenv bootargs $bootargs " \ + "root=/dev/mtdblock$partition ro " \ + "rootfstype=jffs2\0" \ + "initrdargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "iboot=bootp;run initrdargs;tftp;bootm\0" \ + "fboot=run flashargs;fsload /boot/uImage;bootm\0" \ + "nboot=bootp;run nfsargs;tftp;bootm\0" + +#if 0 /* feel free to disable for development */ +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ +#define CONFIG_BOOT_RETRY_TIME 30 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "# " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE + +#define CFG_MEMTEST_START PHYS_SDRAM_1 +#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ + +/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. + * This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE OMAP1510_TIMER1_BASE +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +#define OMAP5910_DPLL_DIV 1 +#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ + (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) + +#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ +#define OMAP5910_LCD_DIV 2 /* CKL/4 */ +#define OMAP5910_ARM_DIV 0 /* CKL/1 */ +#define OMAP5910_DSP_DIV 0 /* CKL/1 */ +#define OMAP5910_TC_DIV 1 /* CKL/2 */ +#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ +#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ + +#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */ +#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ + (OMAP5910_LCD_DIV << 2) | \ + (OMAP5910_ARM_DIV << 4) | \ + (OMAP5910_DSP_DIV << 6) | \ + (OMAP5910_TC_DIV << 8) | \ + (OMAP5910_DSP_MMU_DIV << 10) | \ + (OMAP5910_ARM_TIM_SEL << 12)) + +#endif /* __CONFIG_H */ diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 7118f3f..92ee8cb 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -141,6 +141,7 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options |