diff options
Diffstat (limited to 'include/configs')
35 files changed, 651 insertions, 66 deletions
diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index aceecd8..1190656 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -36,9 +36,9 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_FPS850L 1 /* ...on a FingerPrint Sensor */ -#undef CONFIG_8xx_CONS_SMC1 #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index 4a61d7c..73bcccc 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -36,9 +36,9 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_FPS860L 1 /* ...on a FingerPrint Sensor */ -#undef CONFIG_8xx_CONS_SMC1 #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h index 6c8e81f..88e1946 100644 --- a/include/configs/HMI10.h +++ b/include/configs/HMI10.h @@ -45,8 +45,8 @@ #endif #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 049c80d..d9aa60b 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -36,7 +36,6 @@ #define CONFIG_MPC8313ERDB 1 #define CONFIG_PCI -#define CONFIG_83XX_GENERIC_PCI #define CONFIG_MISC_INIT_R diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 7e6b9eb..d5e62e3 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -332,8 +332,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 #define CONFIG_PCI -#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */ -#define CONFIG_83XX_GENERIC_PCIE 1 +#define CONFIG_PCIE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index b5820ce..907965d 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -18,7 +18,6 @@ #define CONFIG_MPC832x 1 /* MPC832x CPU specific */ #define CONFIG_PCI 1 -#define CONFIG_83XX_GENERIC_PCI 1 /* * System Clock Setup diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 6928981..4e23a11 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -334,7 +334,6 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_83XX_GENERIC_PCI #define CONFIG_83XX_PCI_STREAMING #undef CONFIG_EEPRO100 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 63c6dbc..3cf59ef 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -38,9 +38,6 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ -#undef CONFIG_PCI -#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ - #define PCI_66M #ifdef PCI_66M #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ @@ -374,7 +371,6 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_83XX_GENERIC_PCI #define CONFIG_83XX_PCI_STREAMING #undef CONFIG_EEPRO100 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 037cad5..068df57 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -382,7 +382,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_83XX_GENERIC_PCI #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR 0x00000000 diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 028ef8c..fe6ec48 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -369,7 +369,6 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_83XX_GENERIC_PCI #define CONFIG_83XX_PCI_STREAMING #undef CONFIG_EEPRO100 diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 4fcca09..68d68bb 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -277,7 +277,6 @@ * Addresses are mapped 1-1. */ #define CONFIG_PCI -#define CONFIG_83XX_GENERIC_PCI 1 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 9045bc5..a2a2aad 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -381,8 +381,7 @@ #ifndef __ASSEMBLY__ extern int board_pci_host_broken(void); #endif -#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */ -#define CONFIG_83XX_GENERIC_PCIE 1 +#define CONFIG_PCIE #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 9132718..b637f73 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -49,8 +49,7 @@ #define CONFIG_83XX_PCICLK 66666667 /* in HZ */ #else #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ -#define CONFIG_83XX_GENERIC_PCI 1 -#define CONFIG_83XX_GENERIC_PCIE 1 +#define CONFIG_PCIE #endif #ifndef CONFIG_SYS_CLK_FREQ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index ac8cb57..aa91805 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -40,7 +40,6 @@ #define CONFIG_SYS_IMMR 0xE0000000 #define CONFIG_PCI -#define CONFIG_83XX_GENERIC_PCI #define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_HARD_I2C #define CONFIG_TSEC_ENET diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 6abd3f1..5dd72ff 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -38,6 +38,8 @@ #define CONFIG_NSCU 1 #define CONFIG_8xx_CONS_SCC1 1 /* Console is on SMC1 */ +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_66MHz 1 /* running at 66 MHz, 1:1 clock */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 08b401e..b847ce8 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -37,7 +37,6 @@ #define CONFIG_MPC8313 1 #define CONFIG_PCI -#define CONFIG_83XX_GENERIC_PCI #define CONFIG_MISC_INIT_R diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 4c469e3..7266f9a 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -38,15 +38,11 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_SM850 1 /*...on a MPC850 Service Module */ -#undef CONFIG_8xx_CONS_SMC1 /* SMC1 not usable because Ethernet on SCC3 */ #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index 14ff62c..1e6d9ce 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -48,7 +48,8 @@ /* 'cpuclk' variable with valid value) */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 1f816f3..966beae 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -43,8 +43,8 @@ #endif #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 42dcbfc..cfa693d 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -41,8 +41,8 @@ #endif #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 541a27b..492bdcc 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -247,7 +247,6 @@ extern int tqm834x_num_flash_banks; #if defined(CONFIG_PCI) #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_83XX_GENERIC_PCI #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ /* PCI1 host bridge */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 290e211..dc0498e 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -37,8 +37,8 @@ #define CONFIG_TQM850L 1 /* ...on a TQM8xxL module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 2170df5..cdabc53 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -37,8 +37,8 @@ #define CONFIG_TQM850M 1 /* ...on a TQM8xxM module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 3d7dc42..1255928 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -37,9 +37,8 @@ #define CONFIG_TQM855L 1 /* ...on a TQM8xxL module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 35cfa08..584d40b 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -37,9 +37,8 @@ #define CONFIG_TQM855M 1 /* ...on a TQM8xxM module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 4ac485d..a772a27 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -37,9 +37,8 @@ #define CONFIG_TQM860L 1 /* ...on a TQM8xxL module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 39da0bb..7c34786 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -37,9 +37,8 @@ #define CONFIG_TQM860M 1 /* ...on a TQM8xxM module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 1f79b17..75d2dac 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -40,9 +40,8 @@ #define CONFIG_TQM862L 1 /* ...on a TQM8xxL module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 86d5b01..0c7aacd 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -40,9 +40,8 @@ #define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 04f538c..071afd4 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -51,7 +51,8 @@ #endif #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 4c80bad..d435819 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -47,7 +47,8 @@ /* 'cpuclk' variable with valid value) */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ - +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 27f8fd1..0ef3554 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -130,7 +130,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 -#endif #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 20dcd1c..868bd54 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -329,7 +329,6 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_83XX_GENERIC_PCI #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -652,8 +651,8 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0" \ - "update=protect off fff00000 fff3ffff; " \ - "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ + "update=protect off ff800000 ff83ffff; " \ + "era ff800000 ff83ffff; cp.b 100000 ff800000 ${filesize}\0" \ "upd=run load update\0" \ "fdtaddr=400000\0" \ "fdtfile=sbc8349.dtb\0" \ diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 9ebafcc..f7813a1 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -38,8 +38,8 @@ #define CONFIG_TQM8xxL 1 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h new file mode 100644 index 0000000..1477552 --- /dev/null +++ b/include/configs/vme8349.h @@ -0,0 +1,608 @@ +/* + * esd vme8349 U-Boot configuration file + * Copyright (c) 2008, 2009 esd gmbh Hannover Germany + * + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * reinhard.arlt@esd-electronics.de + * Based on the MPC8349EMDS config. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * vme8349 board configuration file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC834x 1 /* MPC834x family */ +#define CONFIG_MPC8349 1 /* MPC8349 specific */ +#define CONFIG_VME8349 1 /* ESD VME8349 board specific */ + +#define CONFIG_PCI +/* Don't enable PCI2 on vme834x - it doesn't exist physically. */ +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ + +#define PCI_66M +#ifdef PCI_66M +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#else +#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#ifdef PCI_66M +#define CONFIG_SYS_CLK_FREQ 66000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 +#else +#define CONFIG_SYS_CLK_FREQ 33000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 +#endif +#endif + +#define CONFIG_SYS_IMMR 0xE0000000 + +#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x00100000 + +/* + * DDR Setup + */ +#define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#undef CONFIG_SPD_EEPROM /* dont use SPD EEPROM for DDR setup*/ +#define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_DDR_2T_TIMING + +/* + * Manually set up DDR parameters + */ +#define CONFIG_SYS_DDR_SIZE 512 /* MB */ + +#if (CONFIG_SYS_DDR_SIZE == 512) +#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10 | \ + CSCONFIG_BANK_BIT_3) +#endif + +/* + * Manually set up DDR parameters + */ +#define CONFIG_SYS_DDR_TIMING_0 0x00220802 +#define CONFIG_SYS_DDR_TIMING_1 0x39377322 +#define CONFIG_SYS_DDR_TIMING_2 0x2f9848ca /* P9-45, tuning? */ +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuf,no DYN_PWR */ +#define CONFIG_SYS_DDR_MODE 0x07940242 +#define CONFIG_SYS_DDR_MODE2 0x00000000 +/* autocharge,no open page */ +#define CONFIG_SYS_DDR_INTERVAL 0x04060100 +#define CONFIG_SYS_DDR_SDRAM_CFG 0x63000000 +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x04061000 + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ +/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ + +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + (2 << BR_PS_SHIFT) | /* 32bit */ \ + BR_V) /* valid */ + +#define CONFIG_SYS_OR0_PRELIM 0xF8006FF7 /* 128 MB flash size */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001A /* 128 MB window size */ + +#define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801) +#define CONFIG_SYS_OR1_PRELIM (0xffff8000 | 0x00000200) +#define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000 +#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x0000000e) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */ + +#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT +#else +#undef CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */ +#define CONFIG_SYS_INIT_RAM_END 0x1000 /* size */ + +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* size init data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */ +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Malloc size */ + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LBC_LBCR 0x00000000 + +#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* I2C */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_NOPROBES {{0, 0x69}} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C1_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C1_OFFSET +/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */ + +#define CONFIG_SYS_I2C_8574_ADDR2 0x20 /* I2C1, PCF8574 */ + +/* TSEC */ +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) +#define CONFIG_SYS_TSEC2_OFFSET 0x25000 +#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET) + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 +#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE +#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE +#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 +#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE +#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 +#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ + +#if defined(CONFIG_PCI) + +#define PCI_64BIT +#define PCI_ONE_PCI1 +#if defined(PCI_64BIT) +#undef PCI_ALL_PCI1 +#undef PCI_TWO_PCI1 +#undef PCI_ONE_PCI1 +#endif + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CONFIG_NET_MULTI + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xFIXME + #define PCI_ENET0_MEMADDR 0xFIXME + #define PCI_IDSEL_NUMBER 0xFIXME +#endif + +#endif /* CONFIG_PCI */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#if defined(CONFIG_TSEC_ENET) +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif + +#define CONFIG_GMII /* MII PHY management */ +#define CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_PHY_M88E1111 +#define TSEC1_PHY_ADDR 0x08 +#define TSEC2_PHY_ADDR 0x10 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#ifndef CONFIG_SYS_RAMBOOT + #define CONFIG_ENV_IS_IN_FLASH + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0xc0000) + #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CONFIG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#else + #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ + #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) + #define CONFIG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE +#define CONFIG_SYS_RTC_BUS_NUM 0x01 +#define CONFIG_SYS_I2C_RTC_ADDR 0x32 +#define CONFIG_RTC_RX8025 +#define CONFIG_CMD_TSI148 + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_SYS_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#define CONFIG_CMD_ELF +/* Pass Ethernet MAC to VxWorks */ +#define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0 + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#if defined(CONFIG_CMD_KGDB) + #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max num of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */ +#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Init Memory map for Linux*/ + +#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X2 |\ + HRCWL_CORE_TO_CSB_2X1) + +#if defined(PCI_64BIT) +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_64_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII) +#else +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_32_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII) +#endif + +/* System IO Config */ +#define CONFIG_SYS_SICRH 0 +#define CONFIG_SYS_SICRL SICRL_LDP_A + +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK + +#define CONFIG_SYS_HID2 HID2_HBE + +#define CONFIG_SYS_GPIO1_PRELIM +#define CONFIG_SYS_GPIO1_DIR 0x00100000 +#define CONFIG_SYS_GPIO1_DAT 0x00100000 + +#define CONFIG_SYS_GPIO2_PRELIM +#define CONFIG_SYS_GPIO2_DIR 0x78900000 +#define CONFIG_SYS_GPIO2_DAT 0x70100000 + +#define CONFIG_HIGH_BATS /* High BATs supported */ + +/* DDR @ 0x00000000 */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#else +#define CONFIG_SYS_IBAT1L (0) +#define CONFIG_SYS_IBAT1U (0) +#define CONFIG_SYS_IBAT2L (0) +#define CONFIG_SYS_IBAT2U (0) +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#else +#define CONFIG_SYS_IBAT3L (0) +#define CONFIG_SYS_IBAT3U (0) +#define CONFIG_SYS_IBAT4L (0) +#define CONFIG_SYS_IBAT4U (0) +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | \ + BATU_VS | BATU_VP) + +#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#if (CONFIG_SYS_DDR_SIZE == 512) +#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ + BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ + BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#endif + +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U +#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U +#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U +#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#endif + +#define CONFIG_HOSTNAME VME8349 +#define CONFIG_ROOTPATH /tftpboot/rootfs +#define CONFIG_BOOTFILE uImage + +#define CONFIG_LOADADDR 500000 /* def location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=vme8349\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0" \ + "update=protect off fff00000 fff3ffff; " \ + "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ + "upd=run load update\0" \ + "fdtaddr=400000\0" \ + "fdtfile=vme8349.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#endif /* __CONFIG_H */ |