diff options
Diffstat (limited to 'include/configs')
37 files changed, 703 insertions, 114 deletions
diff --git a/include/configs/beaver.h b/include/configs/beaver.h index df9a98b..9ff089e 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -21,6 +21,9 @@ #include "tegra30-common.h" +/* VDD core PMIC */ +#define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 + /* Enable fdt support for Beaver. Flash the image in u-boot-dtb.bin */ #define CONFIG_DEFAULT_DEVICE_TREE tegra30-beaver #define CONFIG_OF_CONTROL diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index e15b527..59f429c 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -21,6 +21,9 @@ #include "tegra30-common.h" +/* VDD core PMIC */ +#define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 + /* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */ #define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu #define CONFIG_OF_CONTROL diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 860a11d..b279409 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -386,6 +386,7 @@ #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_FOOTPRINT 32768 +#define CONFIG_SPL_PAD_TO 32768 #endif /* Load U-Boot Image From MMC */ diff --git a/include/configs/draco.h b/include/configs/draco.h new file mode 100644 index 0000000..a2438d8 --- /dev/null +++ b/include/configs/draco.h @@ -0,0 +1,92 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_DRACO_H +#define __CONFIG_DRACO_H + +#define CONFIG_SIEMENS_DRACO +#define MACH_TYPE_DRACO 4314 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DRACO + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 275 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +#define BOARD_DFU_BUTTON_GPIO 27 +#define BOARD_DFU_BUTTON_LED 64 /* red LED */ +#define BOARD_STATUS_LED 103 /* green LED */ +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + CONFIG_COMMON_ENV_SETTINGS + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"reset;" + + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_DRACO_H */ diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h index 75f7812..76e6cac 100644 --- a/include/configs/dxr2.h +++ b/include/configs/dxr2.h @@ -20,12 +20,12 @@ #include "siemens-am33x-common.h" #define CONFIG_SYS_MPUCLK 275 -#define DXR2_IOCTRL_VAL 0x18b #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #define BOARD_DFU_BUTTON_GPIO 27 -#define BOARD_DFU_BUTTON_LED 64 +#define BOARD_DFU_BUTTON_LED 64 /* red LED */ +#define BOARD_STATUS_LED 103 /* green LED */ #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ #undef CONFIG_DOS_PARTITION diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h new file mode 100644 index 0000000..eb91c44 --- /dev/null +++ b/include/configs/embestmx6boards.h @@ -0,0 +1,336 @@ +/* + * Copyright (C) 2014 Eukréa Electromatique + * Author: Eric Bénard <eric@eukrea.com> + * + * Configuration settings for the Embest RIoTboard + * + * based on mx6*sabre*.h which are : + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __RIOTBOARD_CONFIG_H +#define __RIOTBOARD_CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#include "mx6_common.h" +#include <linux/sizes.h> + +#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_CONSOLE_DEV "ttymxc0" +#define CONFIG_MMCROOT "/dev/mmcblk1p2" + +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_MX6 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART + +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 4 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +#define CONFIG_CMD_SF +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8)) +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#endif + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_SETEXPR +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#ifdef CONFIG_SUPPORT_EMMC_BOOT +#define EMMC_ENV \ + "emmcdev=2\0" \ + "update_emmc_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "if mmc dev ${emmcdev}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" +#else +#define EMMC_ENV "" +#endif + +#ifdef CONFIG_CMD_SF +#define SF_ENV \ + "update_spi_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if ${get_cmd} ${update_spi_firmware_filename}; then " \ + "if sf probe; then " \ + "sf erase 0 0xc0000; " \ + "sf write ${loadaddr} 0x400 ${filesize}; " \ + "fi; " \ + "fi\0" +#else +#define SF_ENV "" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr=0x18000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "console=" CONFIG_CONSOLE_DEV "\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=1\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ + EMMC_ENV \ + SF_ENV \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +#define CONFIG_ARP_TIMEOUT 200UL + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE (128 * 1024) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) + +#if defined(CONFIG_ENV_IS_IN_MMC) +/* RiOTboard */ +#define CONFIG_DEFAULT_FDT_FILE "imx6s-riotboard.dtb" +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#define CONFIG_SYS_MMC_ENV_DEV 2 /* SDHC4 */ +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) +/* MarSBoard */ +#define CONFIG_DEFAULT_FDT_FILE "imx6q-marsboard.dtb" +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + +#define CONFIG_OF_LIBFDT + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +/* Framebuffer */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP + +#endif /* __RIOTBOARD_CONFIG_H */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index 414db42..5a9b1b4 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -288,4 +288,6 @@ #define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_GPIO + #endif /* __CONFIG_H */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 3398390..cd55495 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -24,6 +24,8 @@ #define CONFIG_SERIAL_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) @@ -136,6 +138,8 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CONFIG_POWER_LTC3676 +#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c /* Various command support */ #include <config_cmd_default.h> @@ -190,6 +194,22 @@ #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP #define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200 +/* Framebuffer and LCD */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_CMD_HDMIDETECT +#define CONFIG_CONSOLE_MUX +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP + /* serial console (ttymxc1,115200) */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/hummingboard.h b/include/configs/hummingboard.h index 2895523..34dbdce 100644 --- a/include/configs/hummingboard.h +++ b/include/configs/hummingboard.h @@ -27,6 +27,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M) diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 9bb8f34..dde7329 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -165,6 +165,7 @@ #define CONFIG_CMD_EEPROM /* U-Boot general configuration */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_PROMPT "K2HK EVM # " #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_PBSIZE 2048 diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 90e2d7a..1a93d17 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -32,15 +32,9 @@ #define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ -#if defined(CONFIG_SYS_USE_BOOT_NORFLASH) -#define CONFIG_CMD_FLASH -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#else -/* SPI flash boot is default. */ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_SYS_TEXT_BASE 0xE6304000 -#endif #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS @@ -109,29 +103,6 @@ #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ -#if defined(CONFIG_SYS_USE_BOOT_NORFLASH) -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS -#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) } -#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) } -#define CONFIG_SYS_FLASH_ERASE_TOUT 3000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 3000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 3000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000 -/* ENV setting */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) - -#else /* CONFIG_SYS_USE_BOOT_NORFLASH */ - #define CONFIG_SYS_NO_FLASH #define CONFIG_SPI #define CONFIG_SH_QSPI @@ -142,8 +113,6 @@ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_ADDR 0xC0000 -#endif /* CONFIG_SYS_USE_BOOT_NORFLASH */ - /* Common ENV setting */ #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_SECT_SIZE (256 * 1024) @@ -166,8 +135,9 @@ #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 10000000 -#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) #define CONFIG_SH_SCIF_CLK_FREQ 14745600 #define CONFIG_SYS_TMU_CLK_DIV 4 diff --git a/include/configs/lager.h b/include/configs/lager.h index b420e45..ac31128 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -16,8 +16,6 @@ #define CONFIG_RMOBILE #define CONFIG_RMOBILE_BOARD_STRING "Lager" #define CONFIG_SH_GPIO_PFC -#define MACH_TYPE_LAGER 4538 -#define CONFIG_MACH_TYPE MACH_TYPE_LAGER #include <asm/arch/rmobile.h> @@ -35,14 +33,9 @@ #define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ -#if defined(CONFIG_SYS_USE_BOOT_NORFLASH) -#define CONFIG_CMD_FLASH -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#else #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_SYS_TEXT_BASE 0xE8080000 -#endif #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS @@ -111,31 +104,6 @@ #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) -#if defined(CONFIG_SYS_USE_BOOT_NORFLASH) -/* USE NOR FLASH */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS -#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) } -#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) } -#define CONFIG_SYS_FLASH_ERASE_TOUT 3000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 3000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 3000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000 - -/* ENV setting */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) - -#else /* CONFIG_SYS_USE_BOOT_NORFLASH */ - /* USE SPI */ #define CONFIG_SPI #define CONFIG_SPI_FLASH_BAR @@ -147,7 +115,6 @@ /* ENV setting */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_ADDR 0xC0000 -#endif /* Common ENV setting */ #define CONFIG_ENV_OVERWRITE @@ -186,9 +153,10 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ /* Board Clock */ -#define CONFIG_BASE_CLK_FREQ 20000000u -#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_BASE_CLK_FREQ / 2) /* EXT / 2 */ -#define CONFIG_PLL1_CLK_FREQ (CONFIG_BASE_CLK_FREQ * 156 / 2) +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) #define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) #define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) #define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index bb1fa44..3e387c4 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -7,7 +7,6 @@ #ifndef __CONFIGS_M28EVK_H__ #define __CONFIGS_M28EVK_H__ - /* System configurations */ #define CONFIG_MX28 /* i.MX28 SoC */ #define MACH_TYPE_M28EVK 3613 diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 797a637..134d680 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -23,6 +23,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 3f0d80a..5bbae8c 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -23,6 +23,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_OF_LIBFDT /* Size of malloc() pool */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 5859f36..12d79b4 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -22,6 +22,8 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index a04e7c7..3da0ef4 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -23,6 +23,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 7a2c172..e59a3b4 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -25,6 +25,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 5d02d23..0fa6573 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -47,6 +47,7 @@ #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP #define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 1876dbf..3d05a64 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -10,6 +10,7 @@ #define __CONFIG_H #include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> #include <linux/sizes.h> #include "mx6_common.h" @@ -196,4 +197,15 @@ #define CONFIG_CMD_CACHE #endif +#define CONFIG_CMD_SF +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 11) << 8)) +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index ba55177..8bce28f 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -40,6 +40,7 @@ /* * CPU specifics */ +#define CONFIG_SYS_GENERIC_BOARD /* MXS uses FDT */ #define CONFIG_OF_LIBFDT diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index f7e7315..b2b17ce 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -24,6 +24,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) @@ -141,6 +142,7 @@ #define CONFIG_CMD_HDMIDETECT #define CONFIG_CONSOLE_MUX #define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index fae0e6f..0a7df60 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -66,6 +66,16 @@ #define CONFIG_TWL4030_USB 1 #define CONFIG_USB_ETHER #define CONFIG_USB_ETHER_RNDIS +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 0 +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_G_DNL_VENDOR_NUM 0x0451 +#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 +#define CONFIG_G_DNL_MANUFACTURER "TI" +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 /* USB EHCI */ #define CONFIG_CMD_USB @@ -170,11 +180,17 @@ "if test $beaglerev = C4; then " \ "setenv fdtfile omap3-beagle.dtb; fi; " \ "if test $beaglerev = xMAB; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ + "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \ "if test $beaglerev = xMC; then " \ "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ + "validatefdt=" \ + "if test $beaglerev = xMAB; then " \ + "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ + "setenv fdtfile omap3-beagle-xm.dtb; " \ + "fi; " \ + "fi; \0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ @@ -190,7 +206,7 @@ "rootfstype=${ramrootfstype}\0" \ "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ diff --git a/include/configs/pepper.h b/include/configs/pepper.h new file mode 100644 index 0000000..cc153ab --- /dev/null +++ b/include/configs/pepper.h @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2013 Gumstix, Inc. - http://www.gumstix.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_PEPPER_H +#define __CONFIG_PEPPER_H + +#define CONFIG_MMC +#include <configs/ti_am335x_common.h> + +#undef CONFIG_BOARD_LATE_INIT +#undef CONFIG_SPL_OS_BOOT + +/* Clock defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "pepper# " + +/* Mach type */ +#define MACH_TYPE_PEPPER 4207 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_PEPPER + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_IS_NOWHERE +/* Display cpuinfo */ +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "bootdir=/boot\0" \ + "bootfile=zImage\0" \ + "fdtfile=am335x-pepper.dtb\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ + "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \ + "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loaduimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage\0" \ + "uimageboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ + "ubiboot=echo Booting from nand (ubifs) ...; " \ + "run ubiargs; run ubiload; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmcload; then " \ + "run mmcboot;" \ + "fi;" \ + "if run loaduimage; then " \ + "run uimageboot;" \ + "fi;" \ + "fi;" \ + +/* Serial console configuration */ +#define CONFIG_CONS_INDEX 1 /* UART0 */ +#define CONFIG_SERIAL1 1 +#define CONFIG_SYS_NS16550_COM1 0x44e09000 + +/* Ethernet support */ +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_PHY_RESET_DELAY 1000 + +/* SPL */ +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#endif /* __CONFIG_PEPPER_H */ diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 6276d43..d75d562 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -21,7 +21,7 @@ #include "siemens-am33x-common.h" #define CONFIG_SYS_MPUCLK 720 -#define DXR2_IOCTRL_VAL 0x18b +#define DDR_IOCTRL_VAL 0x18b #define DDR_PLL_FREQ 266 #define BOARD_DFU_BUTTON_GPIO 59 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 991c43e..799d4fe 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -214,8 +214,8 @@ /* * I2C Settings */ -#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get(j4, 3) -#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get(j4, 0) +#define CONFIG_SOFT_I2C_GPIO_SCL S5PC110_GPIO_J43 +#define CONFIG_SOFT_I2C_GPIO_SDA S5PC110_GPIO_J40 #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 2da8871..eb046cd 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -111,12 +111,9 @@ "onenand write 0x41008000 0xc00000 0x500000\0" \ "bootk=" \ "run loaduimage; bootm 0x40007FC0\0" \ - "updatemmc=" \ - "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \ - "mmc boot 0 1 1 0\0" \ "updatebackup=" \ - "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \ - "mmc boot 0 1 1 0\0" \ + "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \ + "mmc dev 0 0\0" \ "updatebootb=" \ "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \ "lpj=lpj=3981312\0" \ @@ -170,8 +167,8 @@ /* * I2C Settings */ -#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7) -#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6) +#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7 +#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6 #define CONFIG_CMD_I2C @@ -196,10 +193,10 @@ */ #define CONFIG_SOFT_SPI #define CONFIG_SOFT_SPI_MODE SPI_MODE_3 -#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1) -#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3) -#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0) -#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3) +#define CONFIG_SOFT_SPI_GPIO_SCLK EXYNOS4_GPIO_Y31 +#define CONFIG_SOFT_SPI_GPIO_MOSI EXYNOS4_GPIO_Y33 +#define CONFIG_SOFT_SPI_GPIO_MISO EXYNOS4_GPIO_Y30 +#define CONFIG_SOFT_SPI_GPIO_CS EXYNOS4_GPIO_Y43 #define SPI_DELAY udelay(1) #undef SPI_INIT @@ -231,8 +228,8 @@ int universal_spi_read(void); #define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1 #define KEY_PWR_INTERRUPT_MASK (1 << 7) -#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0) -#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1) +#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20 +#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21 #endif /* __ASSEMBLY__ */ /* LCD console */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 721c4e6..73a123d 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -358,7 +358,7 @@ #define CONFIG_COMMON_ENV_SETTINGS \ "verify=no \0" \ - "project_dir=systemone\0" \ + "project_dir=targetdir\0" \ "upgrade_available=0\0" \ "altbootcmd=run bootcmd\0" \ "bootlimit=3\0" \ @@ -402,7 +402,11 @@ "dfu_args=run bootargs_defaults;" \ "setenv bootargs ${bootargs} ;" \ "mtdparts default; " \ - "dfu 0 nand 0; \0" \ + "led dfu 1;" \ + "led stat 0;" \ + "dfu 0 nand 0;" \ + "led dfu 0;" \ + "led stat 1;\0" \ "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \ "net_args=run bootargs_defaults;" \ "mtdparts default;" \ diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 183aae7..66fa179 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -14,4 +14,8 @@ #undef CONFIG_DEFAULT_DEVICE_TREE #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250 +/* Enable FIT support and comparison */ +#define CONFIG_FIT +#define CONFIG_FIT_BEST_MATCH + #endif /* __CONFIG_SMDK_H */ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index b96eea8..58f706a 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -51,4 +51,8 @@ #define CONFIG_MAX_I2C_NUM 11 +/* Enable FIT support and comparison */ +#define CONFIG_FIT +#define CONFIG_FIT_BEST_MATCH + #endif /* __CONFIG_5420_H */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 1388f49..34adfaf 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -12,6 +12,7 @@ /* High Level Configuration Options */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5P 1 /* S5P Family */ +#define CONFIG_EXYNOS4 /* EXYNOS4 Family */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ #define CONFIG_SMDKV310 1 /* working with SMDKV310*/ diff --git a/include/configs/snow.h b/include/configs/snow.h index ed5c0b6..673fa14 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -14,4 +14,8 @@ #undef CONFIG_DEFAULT_DEVICE_TREE #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow +/* Enable FIT support and comparison */ +#define CONFIG_FIT +#define CONFIG_FIT_BEST_MATCH + #endif /* __CONFIG_SNOW_H */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index ae786cf..129acf2 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -48,6 +48,13 @@ #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* + * Common HW configuration. + * If this varies between SoCs later, move to tegraNN-common.h + * Note: This is number of devices, not max device ID. + */ +#define CONFIG_SYS_MMC_MAX_DEVICE 4 + +/* * select serial console configuration */ #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/trats.h b/include/configs/trats.h index c4afecf..90f1962 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -59,7 +59,7 @@ #define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -121,12 +121,9 @@ "bootm 0x40007FC0 - ${fdtaddr};" \ "fi;" \ "bootm 0x40007FC0;\0" \ - "updatemmc=" \ - "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \ - "mmc boot 0 1 1 0\0" \ "updatebackup=" \ - "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \ - "mmc boot 0 1 1 0\0" \ + "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \ + "mmc dev 0 0\0" \ "updatebootb=" \ "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \ "lpj=lpj=3981312\0" \ @@ -207,8 +204,8 @@ #define CONFIG_SYS_I2C_INIT_BOARD /* I2C FG */ -#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1) -#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0) +#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_Y41 +#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_Y40 /* POWER */ #define CONFIG_POWER @@ -245,8 +242,8 @@ #define KEY_PWR_INTERRUPT_REG MAX8997_REG_INT1 #define KEY_PWR_INTERRUPT_MASK (1 << 0) -#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0) -#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1) +#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20 +#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21 #endif /* __ASSEMBLY__ */ /* LCD console */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 14def7d..206975b 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -52,7 +52,7 @@ #define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -111,16 +111,11 @@ "bootm 0x40007FC0 - ${fdtaddr};" \ "fi;" \ "bootm 0x40007FC0;\0" \ - "updatemmc=" \ - "mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \ - "mmc boot 0 1 1 0\0" \ "updatebackup=" \ - "mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \ - " mmc boot 0 1 1 0\0" \ + "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \ + " mmc dev 0 0\0" \ "updatebootb=" \ - "mmc read 0x51000000 0x80 0x200; run updatebackup\0" \ - "updateuboot=" \ - "mmc write 0x50000000 0x80 0x400\0" \ + "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \ "mmcboot=" \ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ @@ -227,8 +222,8 @@ int get_soft_i2c_sda_pin(void); #define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 #define KEY_PWR_INTERRUPT_MASK (1 << 1) -#define KEY_VOL_UP_GPIO exynos4x12_gpio_get(2, x2, 2) -#define KEY_VOL_DOWN_GPIO exynos4x12_gpio_get(2, x3, 3) +#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22 +#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33 #endif /* __ASSEMBLY__ */ /* LCD console */ diff --git a/include/configs/udoo.h b/include/configs/udoo.h index a0306de..700e9c1 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -26,6 +26,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M) diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 6c74c72..7d96908 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -26,6 +26,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) @@ -56,6 +58,12 @@ #define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + /* MMC Configuration */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC @@ -98,7 +106,9 @@ #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_CMD_HDMIDETECT #define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb" @@ -135,7 +145,33 @@ "fi; " \ "fi\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ + "root=${mmcroot}; run videoargs\0" \ + "videoargs=" \ + "setenv nextcon 0; " \ + "if hdmidet; then " \ + "setenv bootargs ${bootargs} " \ + "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ + "if=RGB24; " \ + "setenv fbmen fbmem=28M; " \ + "setexpr nextcon ${nextcon} + 1; " \ + "else " \ + "echo - no HDMI monitor;" \ + "fi; " \ + "i2c dev 1; " \ + "if i2c probe 0x10; then " \ + "setenv bootargs ${bootargs} " \ + "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ + "if=RGB666; " \ + "if test 0 -eq ${nextcon}; then " \ + "setenv fbmem fbmem=10M; " \ + "else " \ + "setenv fbmem ${fbmem},10M; " \ + "fi; " \ + "setexpr nextcon ${nextcon} + 1; " \ + "else " \ + "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ + "fi; " \ + "setenv bootargs ${bootargs} ${fbmem}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ |