diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/bct-brettl2.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h new file mode 100644 index 0000000..09691d3 --- /dev/null +++ b/include/configs/bct-brettl2.h @@ -0,0 +1,155 @@ +/* + * U-boot - Configuration file for BF536 brettl2 board + */ + +#ifndef __CONFIG_BCT_BRETTL2_H__ +#define __CONFIG_BCT_BRETTL2_H__ + +#include <asm/config-pre.h> + + +/* + * Processor Settings + */ +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS + + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 16384000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 24 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 3 +#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) + + +/* + * Memory Settings + */ +#define CONFIG_MEM_ADD_WDTH 9 +#define CONFIG_MEM_SIZE 32 + + +/* + * SDRAM Settings + */ +#define CONFIG_EBIU_SDRRC_VAL 0x07f6 +#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd + +#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) +#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) +#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) + + +/* + * Network Settings + */ +#ifndef __ADSPBF534__ +#define ADI_CMDS_NETWORK 1 +#define CONFIG_BFIN_MAC 1 +#define CONFIG_NETCONSOLE 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_HOSTNAME brettl2 +#define CONFIG_IPADDR 192.168.233.224 +#define CONFIG_GATEWAYIP 192.168.233.1 +#define CONFIG_SERVERIP 192.168.233.53 +#define CONFIG_ROOTPATH /romfs/brettl2 +/* Uncomment next line to use fixed MAC address */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ +#endif + + +/* + * Flash Settings + */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_BASE 0x20000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 135 + + +/* + * Env Storage Settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 + +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) +#define ENV_IS_EMBEDDED +#else +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + +#ifdef ENV_IS_EMBEDDED +/* WARNING - the following is hand-optimized to fit within + * the sector before the environment sector. If it throws + * an error during compilation remove an object here to get + * it linked after the configuration sector. + */ +# define LDS_BOARD_TEXT \ + arch/blackfin/cpu/traps.o (.text .text.*); \ + arch/blackfin/cpu/interrupt.o (.text .text.*); \ + arch/blackfin/cpu/serial.o (.text .text.*); \ + common/dlmalloc.o (.text .text.*); \ + lib/crc32.o (.text .text.*); \ + . = DEFINED(env_offset) ? env_offset : .; \ + common/env_embedded.o (.text .text.*); +#endif + + +/* + * I2C Settings + */ +#define CONFIG_BFIN_TWI_I2C 1 +#define CONFIG_HARD_I2C 1 + + +/* + * Misc Settings + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_LOADADDR 0x800000 +#define CONFIG_MISC_INIT_R +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> + +/* disable unnecessary features */ +#undef CONFIG_BOOTM_RTEMS +#undef CONFIG_BZIP2 +#undef CONFIG_KALLSYMS + +#endif |