diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/MERGERBOX.h | 599 | ||||
| -rw-r--r-- | include/configs/MVBLM7.h | 491 |
2 files changed, 0 insertions, 1090 deletions
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h deleted file mode 100644 index 19ea316..0000000 --- a/include/configs/MERGERBOX.h +++ /dev/null @@ -1,599 +0,0 @@ -/* - * Copyright (C) 2007 Freescale Semiconductor, Inc. - * - * Copyright (C) 2011 Matrix Vision GmbH - * Andre Schwarz <andre.schwarz@matrix-vision.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <version.h> - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 -#define CONFIG_MPC837x 1 -#define CONFIG_MPC8377 1 - -#define CONFIG_SYS_TEXT_BASE 0xFC000000 - -#define CONFIG_PCI 1 -#define CONFIG_PCI_INDIRECT_BRIDGE 1 - -#define CONFIG_MASK_AER_AO -#define CONFIG_DISPLAY_AER_FULL - -#define CONFIG_MISC_INIT_R - -/* - * On-board devices - */ -#define CONFIG_TSEC_ENET - -/* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ -#define CONFIG_PCIE -#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -/* - * Hardware Reset Configuration Word stored in EEPROM. - */ -#define CONFIG_SYS_HRCW_LOW 0 -#define CONFIG_SYS_HRCW_HIGH 0 - -/* Arbiter Configuration Register */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 -#define CONFIG_SYS_ACR_RPTCNT 3 - -/* System Priority Control Regsiter */ -#define CONFIG_SYS_SPCR_TSECEP 3 - -/* System Clock Configuration Register */ -#define CONFIG_SYS_SCCR_TSEC1CM 3 -#define CONFIG_SYS_SCCR_TSEC2CM 0 -#define CONFIG_SYS_SCCR_SDHCCM 3 -#define CONFIG_SYS_SCCR_ENCCM 3 /* also clock for I2C-1 */ -#define CONFIG_SYS_SCCR_USBDRCM CONFIG_SYS_SCCR_ENCCM /* must match */ -#define CONFIG_SYS_SCCR_PCIEXP1CM 3 -#define CONFIG_SYS_SCCR_PCIEXP2CM 3 -#define CONFIG_SYS_SCCR_PCICM 1 -#define CONFIG_SYS_SCCR_SATACM 0xFF - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x087c0000 -#define CONFIG_SYS_SICRL 0x40000000 - -/* - * Output Buffer Impedance - */ -#define CONFIG_SYS_OBIR 0x30000000 - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_83XX_DDR_USES_CS0 - -#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN | DDRCDR_PZ_HIZ |\ - DDRCDR_NZ_HIZ | DDRCDR_ODT |\ - DDRCDR_Q_DRN) - -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 - -#define CONFIG_SYS_DDR_MODE_WEAK -#define CONFIG_SYS_DDR_WRITE_DATA_DELAY 2 -#define CONFIG_SYS_DDR_CPO 0x1f - -/* SPD table located at offset 0x20 in extended adressing ROM - * used for HRCW fetch after power-on reset - */ -#define CONFIG_SPD_EEPROM -#define SPD_EEPROM_ADDRESS 0x50 -#define SPD_EEPROM_OFFSET 0x20 -#define SPD_EEPROM_ADDR_LEN 2 - -/* - * The reserved memory - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (512*1024) -#define CONFIG_SYS_MALLOC_LEN (512*1024) - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ - GENERATED_GBL_DATA_SIZE) - -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 -#define CONFIG_SYS_LBC_LBCR 0x00000000 -#define CONFIG_FSL_ELBC 1 - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_FLASH_SIZE 64 - -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 |\ - BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_FLASH_BASE | OR_UPM_XAM |\ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 |\ - OR_GPCM_XACS | OR_GPCM_SCY_15 |\ - OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET |\ - OR_GPCM_EAD) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -/* - * NAND Flash on the Local Bus - */ -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_NAND_FSL_ELBC 1 - -#define CONFIG_SYS_NAND_BASE 0xE0600000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | BR_DECC_CHK_GEN |\ - BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CST |\ - OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST |\ - OR_FCM_TRLX | OR_FCM_EHTR) - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -#define CONFIG_CONSOLE ttyS0 -#define CONFIG_BAUDRATE 115200 - -/* SERDES */ -#define CONFIG_FSL_SERDES -#define CONFIG_FSL_SERDES1 0xe3000 -#define CONFIG_FSL_SERDES2 0xe3100 - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE -#define CONFIG_SYS_PCI_MEM_SIZE (256 << 20) -#define CONFIG_SYS_PCI_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE -#define CONFIG_SYS_PCI_MMIO_SIZE (256 << 20) -#define CONFIG_SYS_PCI_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI_IO_PHYS 0xE0300000 -#define CONFIG_SYS_PCI_IO_SIZE (1 << 20) - -#ifdef CONFIG_PCIE -#define CONFIG_SYS_PCIE1_BASE 0xA0000000 -#define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000 -#define CONFIG_SYS_PCIE1_CFG_SIZE (128 << 20) -#define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE (256 << 20) -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000 -#define CONFIG_SYS_PCIE1_IO_SIZE (8 << 20) - -#define CONFIG_SYS_PCIE2_BASE 0xC0000000 -#define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000 -#define CONFIG_SYS_PCIE2_CFG_SIZE (128 << 20) -#define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE (256 << 20) -#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000 -#define CONFIG_SYS_PCIE2_IO_SIZE (8 << 20) -#endif - -#define CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ - -/* - * TSEC - */ -#define CONFIG_GMII /* MII PHY management */ -#define CONFIG_SYS_VSC8601_SKEWFIX -#define CONFIG_SYS_VSC8601_SKEW_TX 3 -#define CONFIG_SYS_VSC8601_SKEW_RX 3 - -#define CONFIG_TSEC1 -#define CONFIG_HAS_ETH0 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 0x10 -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC1_PHYIDX 0 - -#define CONFIG_ETHPRIME "TSEC0" -#define CONFIG_HAS_ETH0 - -/* - * SATA - */ -#define CONFIG_LIBATA -#define CONFIG_FSL_SATA - -#define CONFIG_SYS_SATA_MAX_DEVICE 2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1_OFFSET 0x18000 -#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2_OFFSET 0x19000 -#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - -#define CONFIG_LBA48 -#define CONFIG_CMD_SATA -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_VENDOREX -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_NTPSERVER -#define CONFIG_BOOTP_RANDOM_DELAY -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_LIB_RAND - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PCI -#define CONFIG_CMD_USB -#define CONFIG_CMD_SPI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_SATA - -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 - -#define CONFIG_RBTREE -#define CONFIG_LZO - -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS - -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=NOR,nand0=NAND" -#define MTDPARTS_DEFAULT "mtdparts=NOR:1M(u-boot),2M(FPGA);NAND:-(root)" - -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 - -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_LOAD_ADDR 0x2000000 -#define CONFIG_LOADADDR 0x4000000 -#define CONFIG_SYS_CBSIZE 256 - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_SYS_MEMTEST_START (60<<20) -#define CONFIG_SYS_MEMTEST_END (70<<20) - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ - -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ -#define CONFIG_HIGH_BATS 1 - -/* DDR: cache cacheable */ -#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM | BATL_PP_RW |\ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM | BATU_BL_256M | BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* unused */ -#define CONFIG_SYS_IBAT1L (0) -#define CONFIG_SYS_IBAT1U (0) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_RW |\ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* unused */ -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW |\ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_64M |\ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K |\ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_RW |\ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M |\ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M |\ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -/* - * I2C EEPROM settings - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_SIZE 0x4000 - -/* - * Environment Configuration - */ -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0xFFD00000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - -/* - * Video - */ -#define CONFIG_VIDEO -#define CONFIG_VIDEO_SM501_PCI -#define VIDEO_FB_LITTLE_ENDIAN -#define CONFIG_CMD_BMP -#define CONFIG_VIDEO_SM501 -#define CONFIG_VIDEO_SM501_32BPP -#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) - -/* - * SPI - */ -#define CONFIG_MPC8XXX_SPI - -/* - * USB - */ -#define CONFIG_SYS_USB_HOST -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_FSL -#define CONFIG_HAS_FSL_DR_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -#define CONFIG_USB_STORAGE -#define CONFIG_USB_KEYBOARD -/* - * - */ -#define CONFIG_BOOTDELAY 5 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_STOP_STR "s" -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_RESET_TO_RETRY 1000 - -#define MV_CI "MergerBox" -#define MV_VCI "MergerBox" -#define MV_FPGA_DATA 0xfc100000 -#define MV_FPGA_SIZE 0x00200000 - -#define CONFIG_SHOW_BOOT_PROGRESS 1 - -#define MV_KERNEL_ADDR_RAM 0x02800000 -#define MV_DTB_ADDR_RAM 0x00600000 -#define MV_INITRD_ADDR_RAM 0x01000000 -#define MV_FITADDR 0xfc300000 -#define MV_SPLAH_ADDR 0xffe00000 - -#define CONFIG_BOOTCOMMAND "run i2c_init;if test ${boot_sqfs} -eq 1;"\ - "then; run fitboot;else;run ubiboot;fi;" -#define CONFIG_BOOTARGS "console=ttyS0,115200n8" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console_nr=0\0"\ - "stdin=serial\0"\ - "stdout=serial\0"\ - "stderr=serial\0"\ - "boot_sqfs=1\0"\ - "usb_dr_mode=host\0"\ - "bootfile=MergerBox.fit\0"\ - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0"\ - "fpga=0\0"\ - "fpgadata=" __stringify(MV_FPGA_DATA) "\0"\ - "fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0"\ - "mv_kernel_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0"\ - "mv_initrd_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0"\ - "mv_dtb_ram=" __stringify(MV_DTB_ADDR_RAM) "\0"\ - "uboota=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"\ - "fitaddr=" __stringify(MV_FITADDR) "\0"\ - "mv_version=" U_BOOT_VERSION "\0"\ - "mtdids=" MTDIDS_DEFAULT "\0"\ - "mtdparts=" MTDPARTS_DEFAULT "\0"\ - "dhcp_client_id=" MV_CI "\0"\ - "dhcp_vendor-class-identifier=" MV_VCI "\0"\ - "upd_uboot=dhcp;tftp bdi2000/u-boot-mergerbox-xp.bin;"\ - "protect off all;erase $uboota +0xC0000;"\ - "cp.b $loadaddr $uboota $filesize\0"\ - "upd_fpga=dhcp;tftp MergerBox.rbf;erase $fpgadata +$fpgadatasize;"\ - "cp.b $loadaddr $fpgadata $filesize\0"\ - "upd_fit=dhcp;tftp MergerBox.fit;erase $fitaddr +0x1000000;"\ - "cp.b $loadaddr $fitaddr $filesize\0"\ - "addsqshrfs=set bootargs $bootargs root=/dev/ram ro "\ - "rootfstype=squashfs\0"\ - "addubirfs=set bootargs $bootargs ubi.mtd=9 root=ubi0:rootfs rw "\ - "rootfstype=ubifs\0"\ - "addusbrfs=set bootargs $bootargs root=/dev/sda1 rw "\ - "rootfstype=ext3 usb-storage.delay_use=1 rootdelay=3\0"\ - "netusbboot=bootp;run fpganetload fitnetload addusbrfs doboot\0"\ - "netubiboot= bootp;run fpganetload fitnetload addubirfs doboot\0"\ - "ubiboot=run fitprep addubirfs;set mv_initrd_ram -;run doboot\0"\ - "doboot=bootm $mv_kernel_ram $mv_initrd_ram $mv_dtb_ram\0"\ - "fitprep=imxtract $fitaddr kernel $mv_kernel_ram;"\ - "imxtract $fitaddr ramdisk $mv_initrd_ram;"\ - "imxtract $fitaddr fdt $mv_dtb_ram\0"\ - "fdtprep=fdt addr $mv_dtb_ram;fdt boardsetup\0"\ - "fitboot=run fitprep fdtprep addsqshrfs doboot\0"\ - "i2c_init=run i2c_speed init_sdi_tx i2c_init_pll\0"\ - "i2c_init_pll=i2c mw 65 9 2;i2c mw 65 9 0;i2c mw 65 5 2b;"\ - "i2c mw 65 7 f;i2c mw 65 8 f;i2c mw 65 11 40;i2c mw 65 12 40;"\ - "i2c mw 65 13 40; i2c mw 65 14 40; i2c mw 65 a 0\0"\ - "i2c_speed=i2c dev 0;i2c speed 300000;i2c dev 1;i2c speed 120000\0"\ - "init_sdi_tx=i2c mw 21 6 0;i2c mw 21 2 0;i2c mw 21 3 0;sleep 1;"\ - "i2c mw 21 2 ff;i2c mw 21 3 3c\0"\ - "splashimage=" __stringify(MV_SPLAH_ADDR) "\0"\ - "" - -/* - * FPGA - */ -#define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA -#define CONFIG_FPGA_ALTERA -#define CONFIG_FPGA_CYCLON2 - -#endif diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h deleted file mode 100644 index 1ee4d7c..0000000 --- a/include/configs/MVBLM7.h +++ /dev/null @@ -1,491 +0,0 @@ -/* - * Copyright (C) Matrix Vision GmbH 2008 - * - * Matrix Vision mvBlueLYNX-M7 configuration file - * based on Freescale's MPC8349ITX. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <version.h> - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 -#define CONFIG_MPC834x 1 -#define CONFIG_MPC8343 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_SYS_IMMR 0xE0000000 - -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_SKIP_HOST_BRIDGE -#define CONFIG_TSEC_ENET -#define CONFIG_MPC8XXX_SPI -#define CONFIG_HARD_SPI -#define MVBLM7_MMC_CS 0x04000000 -#define CONFIG_MISC_INIT_R - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 100000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 100000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -/* - * DDR Setup - */ -#undef CONFIG_SPD_EEPROM - -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_83XX_DDR_USES_CS0 1 -#define CONFIG_SYS_MEMTEST_START (60<<20) -#define CONFIG_SYS_MEMTEST_END (70<<20) -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_SYS_DDRCDR (DDRCDR_PZ_HIZ \ - | DDRCDR_NZ_HIZ \ - | DDRCDR_Q_DRN) - /* 0x22000001 */ -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 - -#define CONFIG_SYS_DDR_SIZE 512 - -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f - -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x3837c322 -#define CONFIG_SYS_DDR_TIMING_2 0x0f9848c6 -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -#define CONFIG_SYS_DDR_SDRAM_CFG 0x43080008 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_INTERVAL 0x02000100 - -#define CONFIG_SYS_DDR_MODE 0x04040242 -#define CONFIG_SYS_DDR_MODE2 0x00800000 - -/* Flash */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_FLASH_BASE 0xFF800000 -#define CONFIG_SYS_FLASH_SIZE 8 -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - -/* - * U-Boot memory configuration - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#undef CONFIG_SYS_RAMBOOT - -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) - -/* - * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 -/* LB refresh timer prescal, 266MHz/32*/ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_CONSOLE ttyS0 -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define MV_DTB_NAME "mvblm7.dtb" - -/* - * PCI - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 -#define CONFIG_SYS_PCI1_MMIO_BASE \ - (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 - -#define CONFIG_NET_RETRY_COUNT 3 - -#define CONFIG_PCI_66M -#define CONFIG_83XX_CLKIN 66666667 -#define CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW - -/* TSEC */ -#define CONFIG_GMII -#define CONFIG_SYS_VSC8601_SKEWFIX -#define CONFIG_SYS_VSC8601_SKEW_TX 3 -#define CONFIG_SYS_VSC8601_SKEW_RX 3 - -#define CONFIG_TSEC1 -#define CONFIG_TSEC2 - -#define CONFIG_HAS_ETH0 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_FEC1_PHY_NORXERR -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) -#define TSEC1_PHY_ADDR 0x10 -#define TSEC1_PHYIDX 0 -#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) - -#define CONFIG_HAS_ETH1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_FEC2_PHY_NORXERR -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) -#define TSEC2_PHY_ADDR 0x11 -#define TSEC2_PHYIDX 0 -#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) - -#define CONFIG_ETHPRIME "TSEC0" - -#define CONFIG_BOOTP_VENDOREX -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_NTPSERVER -#define CONFIG_BOOTP_RANDOM_DELAY -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_LIB_RAND - -/* USB */ -#define CONFIG_SYS_USB_HOST -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_FSL -#define CONFIG_HAS_FSL_DR_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -/* - * Environment - */ -#undef CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0xFF800000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_LOADS_ECHO -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_PCI -#define CONFIG_CMD_I2C -#define CONFIG_CMD_FPGA -#define CONFIG_CMD_FPGA_LOADMK -#define CONFIG_CMD_USB -#define CONFIG_DOS_PARTITION - -#undef CONFIG_WATCHDOG - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 0x200000 - -#define CONFIG_SYS_PROMPT "mvBL-M7> " -#define CONFIG_SYS_CBSIZE 256 - -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -#define CONFIG_SYS_HRCW_LOW 0x0 -#define CONFIG_SYS_HRCW_HIGH 0x0 - -/* - * System performance - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ -#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ -#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ - -/* clocking */ -#define CONFIG_SYS_SCCR_ENCCM 0 -#define CONFIG_SYS_SCCR_USBMPHCM 0 -#define CONFIG_SYS_SCCR_USBDRCM 2 -#define CONFIG_SYS_SCCR_TSEC1CM 1 -#define CONFIG_SYS_SCCR_TSEC2CM 1 - -#define CONFIG_SYS_SICRH 0x1fef0003 -#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0) - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (CONFIG_SYS_HID0_INIT | \ - HID0_ENABLE_INSTRUCTION_CACHE) - -#define CONFIG_SYS_HID2 HID2_HBE -#define CONFIG_HIGH_BATS 1 - -/* DDR */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* no PCI2 */ -#define CONFIG_SYS_IBAT3L 0 -#define CONFIG_SYS_IBAT3U 0 -#define CONFIG_SYS_IBAT4L 0 -#define CONFIG_SYS_IBAT4U 0 - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT7L 0 -#define CONFIG_SYS_IBAT7U 0 - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_NETDEV eth0 - -/* Default path and filenames */ -#define CONFIG_BOOTDELAY 5 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_STOP_STR "s" -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_RESET_TO_RETRY 1000 - -#define MV_CI "mvBL-M7" -#define MV_VCI "mvBL-M7" -#define MV_FPGA_DATA 0xfff40000 -#define MV_FPGA_SIZE 0 -#define MV_KERNEL_ADDR 0xff810000 -#define MV_INITRD_ADDR 0xffb00000 -#define MV_SCRIPT_ADDR 0xff804000 -#define MV_SCRIPT_ADDR2 0xff806000 -#define MV_DTB_ADDR 0xff808000 -#define MV_INITRD_LENGTH 0x00400000 - -#define CONFIG_SHOW_BOOT_PROGRESS 1 - -#define MV_KERNEL_ADDR_RAM 0x00100000 -#define MV_DTB_ADDR_RAM 0x00600000 -#define MV_INITRD_ADDR_RAM 0x01000000 - -#define CONFIG_BOOTCOMMAND "if imi ${script_addr}; " \ - "then source ${script_addr}; " \ - "else source ${script_addr2}; " \ - "fi;" -#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console_nr=0\0" \ - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "fpga=0\0" \ - "fpgadata=" __stringify(MV_FPGA_DATA) "\0" \ - "fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0" \ - "script_addr=" __stringify(MV_SCRIPT_ADDR) "\0" \ - "script_addr2=" __stringify(MV_SCRIPT_ADDR2) "\0" \ - "mv_kernel_addr=" __stringify(MV_KERNEL_ADDR) "\0" \ - "mv_kernel_addr_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0" \ - "mv_initrd_addr=" __stringify(MV_INITRD_ADDR) "\0" \ - "mv_initrd_addr_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0" \ - "mv_initrd_length=" __stringify(MV_INITRD_LENGTH) "\0" \ - "mv_dtb_addr=" __stringify(MV_DTB_ADDR) "\0" \ - "mv_dtb_addr_ram=" __stringify(MV_DTB_ADDR_RAM) "\0" \ - "dtb_name=" __stringify(MV_DTB_NAME) "\0" \ - "mv_version=" U_BOOT_VERSION "\0" \ - "dhcp_client_id=" MV_CI "\0" \ - "dhcp_vendor-class-identifier=" MV_VCI "\0" \ - "netretry=no\0" \ - "use_static_ipaddr=no\0" \ - "static_ipaddr=192.168.90.10\0" \ - "static_netmask=255.255.255.0\0" \ - "static_gateway=0.0.0.0\0" \ - "initrd_name=uInitrd.mvBL-M7-rfs\0" \ - "zcip=no\0" \ - "netboot=yes\0" \ - "mvtest=Ff\0" \ - "tried_bootfromflash=no\0" \ - "tried_bootfromnet=no\0" \ - "bootfile=mvblm72625.boot\0" \ - "use_dhcp=yes\0" \ - "gev_start=yes\0" \ - "mvbcdma_debug=0\0" \ - "mvbcia_debug=0\0" \ - "propdev_debug=0\0" \ - "gevss_debug=0\0" \ - "watchdog=0\0" \ - "usb_dr_mode=host\0" \ - "sensor_cnt=2\0" \ - "" - -#define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA -#define CONFIG_FPGA_ALTERA -#define CONFIG_FPGA_CYCLON2 - -#endif |