diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/am335x_evm.h | 1 | ||||
| -rw-r--r-- | include/configs/cardhu.h | 65 | ||||
| -rw-r--r-- | include/configs/dalmore.h | 50 | ||||
| -rw-r--r-- | include/configs/igep00x0.h | 5 | ||||
| -rw-r--r-- | include/configs/m28evk.h | 3 | ||||
| -rw-r--r-- | include/configs/medcom-wide.h | 8 | ||||
| -rw-r--r-- | include/configs/mx23_olinuxino.h | 210 | ||||
| -rw-r--r-- | include/configs/mx23evk.h | 202 | ||||
| -rw-r--r-- | include/configs/mx28evk.h | 1 | ||||
| -rw-r--r-- | include/configs/mx6qsabre_common.h | 2 | ||||
| -rw-r--r-- | include/configs/mx6qsabreauto.h | 12 | ||||
| -rw-r--r-- | include/configs/omap4_common.h | 17 | ||||
| -rw-r--r-- | include/configs/paz00.h | 9 | ||||
| -rw-r--r-- | include/configs/pcm051.h | 301 | ||||
| -rw-r--r-- | include/configs/sc_sps_1.h | 1 | ||||
| -rw-r--r-- | include/configs/tec.h | 9 | ||||
| -rw-r--r-- | include/configs/tegra-common-post.h | 38 | ||||
| -rw-r--r-- | include/configs/tegra-common.h | 160 | ||||
| -rw-r--r-- | include/configs/tegra114-common.h | 79 | ||||
| -rw-r--r-- | include/configs/tegra20-common.h | 201 | ||||
| -rw-r--r-- | include/configs/tegra30-common.h | 89 |
21 files changed, 1279 insertions, 184 deletions
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 72459d8..33ee2c4 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -52,6 +52,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ + "fdt_high=0xffffffff\0" \ "rdaddr=0x81000000\0" \ "bootfile=/boot/uImage\0" \ "fdtfile=\0" \ diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h new file mode 100644 index 0000000..1616b39 --- /dev/null +++ b/include/configs/cardhu.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/sizes.h> + +#include "tegra30-common.h" + +/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra30 (Cardhu) # " +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" + +/* Board-specific serial config */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#define CONFIG_MACH_TYPE MACH_TYPE_CARDHU + +#define CONFIG_BOARD_EARLY_INIT_F + +/* I2C */ +#define CONFIG_TEGRA_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_CMD_I2C + +#define CONFIG_ENV_IS_NOWHERE + +/* SPI */ +#define CONFIG_TEGRA_SLINK +#define CONFIG_TEGRA_SLINK_CTRLS 6 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_SIZE (4 << 20) + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h new file mode 100644 index 0000000..ce32c80 --- /dev/null +++ b/include/configs/dalmore.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/sizes.h> + +#include "tegra114-common.h" + +/* Must be off for Dalmore to boot !?!? FIXME */ +#define CONFIG_SYS_DCACHE_OFF + +/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra114 (Dalmore) # " +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore" + +/* Board-specific serial config */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_TEGRA_ENABLE_UARTD +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE + +#define CONFIG_MACH_TYPE MACH_TYPE_DALMORE + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ENV_IS_NOWHERE + +#define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */ + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index e59f41e..0e7f924 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -85,6 +85,9 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 +/* define to enable boot progress via leds */ +#define CONFIG_SHOW_BOOT_PROGRESS + /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -115,7 +118,9 @@ #ifdef CONFIG_BOOT_NAND #define CONFIG_CMD_NAND #endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#endif #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING #define CONFIG_CMD_NFS /* NFS support */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 6887171..1b51fe2 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -191,7 +191,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_ETHPRIME "FEC0" #define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_MULTI #define CONFIG_MII #define CONFIG_FEC_XCV_TYPE RMII #endif @@ -274,7 +273,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 " +#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " #define CONFIG_BOOTCOMMAND "run bootcmd_net" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index e852e315..bae4ba0 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -42,6 +42,7 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT #define CONFIG_ENV_IS_NOWHERE @@ -77,6 +78,13 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h new file mode 100644 index 0000000..7983c5d --- /dev/null +++ b/include/configs/mx23_olinuxino.h @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __MX23_OLINUXINO_CONFIG_H__ +#define __MX23_OLINUXINO_CONFIG_H__ + +/* + * SoC configurations + */ +#define CONFIG_MX23 /* i.MX23 SoC */ +#define CONFIG_MXS_GPIO /* GPIO control */ +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ + +#define CONFIG_MACH_TYPE 4105 + +#include <asm/arch/regs-base.h> + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_MISC_INIT + +/* + * SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT + +/* + * U-Boot Commands + */ +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */ +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +/* Point initial SP in SRAM so SPL can use it too. */ + +#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 +#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) +/* + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot + * binary. In case there was more of this mess, 0x100 bytes are skipped. + */ +#define CONFIG_SYS_TEXT_BASE 0x40000100 + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Serial Driver + */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ + +/* + * MMC Driver + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_GENERIC_MMC +#define CONFIG_MXS_MMC +#endif + +/* + * APBH DMA + */ +#define CONFIG_APBH_DMA + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_OF_LIBFDT + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OVERWRITE +#ifdef CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (256 * 1024) +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +/* + * Extra Environments + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "update_sd_firmware_filename=u-boot.sd\0" \ + "update_sd_firmware=" /* Update the SD firmware partition */ \ + "if mmc rescan ; then " \ + "if tftp ${update_sd_firmware_filename} ; then " \ + "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ + "setexpr fw_sz ${fw_sz} + 1 ; " \ + "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ + "fi ; " \ + "fi\0" \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttyAMA0\0" \ + "fdt_file=imx23-olinuxino.dtb\0" \ + "fdt_addr=0x41000000\0" \ + "boot_fdt=try\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else " \ + "echo ERR: Fail to boot from MMC; " \ + "fi; " \ + "fi; " \ + "else exit; fi" + +#endif /* __MX23_OLINUXINO_CONFIG_H__ */ diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h new file mode 100644 index 0000000..c44a8b8 --- /dev/null +++ b/include/configs/mx23evk.h @@ -0,0 +1,202 @@ +/* + * Freescale i.MX23 EVK board config + * + * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br> + * on behalf of O.S. Systems Software LTDA. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __MX23EVK_CONFIG_H__ +#define __MX23EVK_CONFIG_H__ + +/* SoC configurations */ +#define CONFIG_MX23 /* i.MX23 SoC */ + +#include <asm/arch/regs-base.h> + +#define CONFIG_MXS_GPIO /* GPIO control */ +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ + +#define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_MISC_INIT + +/* SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT + +/* U-Boot Commands */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_CMD_BOOTZ + +/* Memory configurations */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ +#define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +/* Point initial SP in SRAM so SPL can use it too. */ + +#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 +#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot + * binary. In case there was more of this mess, 0x100 bytes are skipped. + */ +#define CONFIG_SYS_TEXT_BASE 0x40000100 + +#define CONFIG_ENV_OVERWRITE + +/* U-Boot general configurations */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* Serial Driver */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* DMA */ +#define CONFIG_APBH_DMA + +/* MMC Driver */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_MXS_MMC +#endif + +/* Boot Linux */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 1 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_OF_LIBFDT + +/* Environment */ +#define CONFIG_ENV_IS_IN_MMC +#ifdef CONFIG_ENV_IS_IN_MMC + #define CONFIG_ENV_OFFSET (256 * 1024) + #define CONFIG_ENV_SIZE (16 * 1024) + #define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +/* Extra Environments */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "update_sd_firmware_filename=u-boot.sd\0" \ + "update_sd_firmware=" /* Update the SD firmware partition */ \ + "if mmc rescan ; then " \ + "if tftp ${update_sd_firmware_filename} ; then " \ + "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ + "setexpr fw_sz ${fw_sz} + 1 ; " \ + "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ + "fi ; " \ + "fi\0" \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttyAMA0\0" \ + "fdt_file=imx23-evk.dtb\0" \ + "fdt_addr=0x41000000\0" \ + "boot_fdt=try\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else " \ + "echo ERR: Fail to boot from MMC; " \ + "fi; " \ + "fi; " \ + "else exit; fi" + +#endif /* __MX23EVK_CONFIG_H__ */ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index dd0ef21..71447d9 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -163,7 +163,6 @@ #define CONFIG_NET_MULTI #define CONFIG_ETHPRIME "FEC0" #define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_MULTI #define CONFIG_MII #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_MX28_FEC_MAC_IN_OCOTP diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index cda4512..d76357c 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -91,7 +91,7 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=1\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index f4a082a..1583c11 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -19,11 +19,23 @@ #define CONFIG_MMCROOT "/dev/mmcblk0p2" #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + #include "mx6qsabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 2 #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 1 /* Boot partition 1 */ #endif #endif /* __MX6QSABREAUTO_CONFIG_H */ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index ca4e724..180cb24 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -157,6 +157,9 @@ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ "run mmcargs; " \ @@ -164,12 +167,20 @@ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi; " \ + "if run loadbootenv; then " \ + "run importbootenv; " \ + "fi;" \ + "if test -n ${uenvcmd}; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot; " \ "fi; " \ "fi" diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 38c79cf..2edb4aa 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -36,6 +36,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* SD/MMC */ #define CONFIG_MMC @@ -71,6 +72,14 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h new file mode 100644 index 0000000..aa90ba9 --- /dev/null +++ b/include/configs/pcm051.h @@ -0,0 +1,301 @@ +/* + * pcm051.h + * + * Phytec phyCORE-AM335x (pcm051) boards information header + * + * Copyright (C) 2013 Lemonage Software GmbH + * Author Lars Poeschel <poeschel@lemonage.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_PCM051_H +#define __CONFIG_PCM051_H + +#define CONFIG_AM33XX + +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> + +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_NO_FLASH +#define MACH_TYPE_PCM051 4144 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_PCM051 + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_VERSION_VARIABLE + +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80007fc0\0" \ + "fdtaddr=0x80000000\0" \ + "rdaddr=0x81000000\0" \ + "bootfile=uImage\0" \ + "fdtfile=pcm051.dtb\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 ro\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ + "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ + +/* Clock Defines */ +#define V_OSCK 25000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#define CONFIG_CMD_ECHO + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * memtest works on 8 MB in DRAM after skipping 32MB from + * start addr of ram disk + */ +#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + + (8 * 1024 * 1024)) + +#define CONFIG_SYS_LOAD_ADDR 0x80007fc0 /* Default load address */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +#define CONFIG_SPI +#define CONFIG_OMAP3_SPI +#define CONFIG_MTD_DEVICE +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 24000000 + + /* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 19) /* 512MiB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + /* Platform/Board specific defs */ +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CONS_INDEX 1 +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SERIAL_MULTI +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ + +/* I2C Configuration */ +#define CONFIG_I2C +#define CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_DRIVER_OMAP24XX_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS + +#define CONFIG_OMAP_GPIO + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ +4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +#define CONFIG_ENV_IS_NOWHERE + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_NET_VCI_STRING "pcm051 U-Boot SPL" +#define CONFIG_SPL_ETH_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +/* + * USB configuration + */ +#define CONFIG_USB_MUSB_DSPS +#define CONFIG_ARCH_MISC_INIT +#define CONFIG_MUSB_GADGET +#define CONFIG_MUSB_PIO_ONLY +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_MUSB_HOST +#define CONFIG_AM335X_USB0 +#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL +#define CONFIG_AM335X_USB1 +#define CONFIG_AM335X_USB1_MODE MUSB_HOST + +#ifdef CONFIG_MUSB_HOST +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#endif + +#ifdef CONFIG_MUSB_GADGET +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#endif /* CONFIG_MUSB_GADGET */ + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_SMSC + +#endif /* ! __CONFIG_PCM051_H */ diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index f807a61..decf8d9 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -158,7 +158,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_ETHPRIME "FEC0" #define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_MULTI #define CONFIG_MII #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_PHYLIB diff --git a/include/configs/tec.h b/include/configs/tec.h index 200cf66..caeb9cd 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -36,13 +36,13 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" -#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011 /* Board-specific serial config */ #define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* SD/MMC */ #define CONFIG_MMC @@ -85,6 +85,13 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK + #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index ee40cc2..f2a70b1 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -119,33 +119,6 @@ #endif -/* - * Memory layout for where various images get loaded by boot scripts: - * - * scriptaddr can be pretty much anywhere that doesn't conflict with something - * else. Put it above BOOTMAPSZ to eliminate conflicts. - * - * kernel_addr_r must be within the first 128M of RAM in order for the - * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will - * decompress itself to 0x8000 after the start of RAM, kernel_addr_r - * should not overlap that area, or the kernel will have to copy itself - * somewhere else before decompression. Similarly, the address of any other - * data passed to the kernel shouldn't overlap the start of RAM. Pushing - * this up to 16M allows for a sizable kernel to be decompressed below the - * compressed load address. - * - * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for - * the compressed kernel to be up to 16M too. - * - * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows - * for the FDT/DTB to be up to 1M, which is hopefully plenty. - */ -#define MEM_LAYOUT_ENV_SETTINGS \ - "scriptaddr=0x10000000\0" \ - "kernel_addr_r=0x01000000\0" \ - "fdt_addr_r=0x02000000\0" \ - "ramdisk_addr_r=0x02100000\0" \ - #ifdef CONFIG_TEGRA_KEYBOARD #define STDIN_KBD_KBC ",tegra-kbc" #else @@ -160,10 +133,17 @@ #define STDIN_KBD_USB "" #endif +#ifdef CONFIG_VIDEO_TEGRA +#define STDOUT_LCD ",lcd" +#else +#define STDOUT_LCD "" +#endif + #define TEGRA_DEVICE_SETTINGS \ "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" \ + "stdout=serial" STDOUT_LCD "\0" \ + "stderr=serial" STDOUT_LCD "\0" \ + "" #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h new file mode 100644 index 0000000..4a656bb --- /dev/null +++ b/include/configs/tegra-common.h @@ -0,0 +1,160 @@ +/* + * (C) Copyright 2010-2012 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __TEGRA_COMMON_H +#define __TEGRA_COMMON_H +#include <asm/sizes.h> +#include <linux/stringify.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */ +#define CONFIG_TEGRA /* which is a Tegra generic machine */ +#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#include <asm/arch/tegra.h> /* get chip and board defs */ + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_OF_LIBFDT /* enable passing of devicetree */ + +/* Environment */ +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ + +/* + * PllX Configuration + */ +#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 + +/* include default commands */ +#include <config_cmd_default.h> + +/* remove unused commands */ +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration support */ +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_NFS /* NFS support */ +#undef CONFIG_CMD_NET /* network support */ + +/* turn on command-line edit/hist/auto */ +#define CONFIG_CMDLINE_EDITING +#define CONFIG_COMMAND_HISTORY +#define CONFIG_AUTO_COMPLETE + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT V_PROMPT +/* + * Increasing the size of the IO buffer as default nfsargs size is more + * than 256 and so it is not possible to edit it + */ +#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) + +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 NV_PA_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ + +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ + +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_TEGRA_GPIO +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_ENTERRCM +#define CONFIG_CMD_BOOTZ + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_RAM_DEVICE +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \ + CONFIG_SPL_TEXT_BASE) +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT + +#endif /* _TEGRA_COMMON_H_ */ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h new file mode 100644 index 0000000..0033530 --- /dev/null +++ b/include/configs/tegra114-common.h @@ -0,0 +1,79 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _TEGRA114_COMMON_H_ +#define _TEGRA114_COMMON_H_ +#include "tegra-common.h" + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ + +/* + * High Level Configuration Options + */ +#define CONFIG_TEGRA114 /* in a NVidia Tegra114 core */ + +/* Environment information, boards can override if required */ +#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */ +#define CONFIG_STACKBASE 0x82800000 /* 40MB */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_SYS_TEXT_BASE 0x8010E000 + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x90000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x82000000\0" \ + "ramdisk_addr_r=0x82100000\0" + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 +#define CONFIG_SPL_STACK 0x800ffffc + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds" + +#endif /* _TEGRA114_COMMON_H_ */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index fe07f72..33e5f52 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -21,80 +21,81 @@ * MA 02111-1307 USA */ -#ifndef __TEGRA20_COMMON_H -#define __TEGRA20_COMMON_H -#include <asm/sizes.h> -#include <linux/stringify.h> +#ifndef _TEGRA20_COMMON_H_ +#define _TEGRA20_COMMON_H_ +#include "tegra-common.h" + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */ -#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */ -#define CONFIG_TEGRA /* which is a Tegra generic machine */ -#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ +#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */ -#define CONFIG_SYS_CACHELINE_SIZE 32 +/* Environment information, boards can override if required */ +#define CONFIG_LOADADDR 0x00408000 /* def. location for kernel */ -#include <asm/arch/tegra.h> /* get chip and board defs */ +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x00A00800 /* default */ +#define CONFIG_STACKBASE 0x02800000 /* 40MB */ -/* Align LCD to 1MB boundary */ -#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_SYS_TEXT_BASE 0x0010E000 /* - * Display CPU and Board information + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x10000000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_OF_LIBFDT /* enable passing of devicetree */ +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x00108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x00090000 +#define CONFIG_SPL_STACK 0x000ffffc + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" + +/* Align LCD to 1MB boundary */ +#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE #ifdef CONFIG_TEGRA_LP0 #define TEGRA_LP0_ADDR 0x1C406000 #define TEGRA_LP0_SIZE 0x2000 #define TEGRA_LP0_VEC \ - "lp0_vec=" __stringify(TEGRA_LP0_SIZE) \ + "lp0_vec=" __stringify(TEGRA_LP0_SIZE) \ "@" __stringify(TEGRA_LP0_ADDR) " " #else #define TEGRA_LP0_VEC #endif -/* Environment */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ - -/* - * PllX Configuration - */ -#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - /* * This parameter affects a TXFILLTUNING field that controls how much data is * sent to the latency fifo before it is sent to the wire. Without this @@ -107,105 +108,13 @@ /* Total I2C ports on Tegra20 */ #define TEGRA_I2C_NUM_CONTROLLERS 4 -/* include default commands */ -#include <config_cmd_default.h> #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART -/* remove unused commands */ -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration support */ -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_NFS /* NFS support */ -#undef CONFIG_CMD_NET /* network support */ - -/* turn on command-line edit/hist/auto */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_COMMAND_HISTORY -#define CONFIG_AUTO_COMPLETE - -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */ -#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT V_PROMPT -/* - * Increasing the size of the IO buffer as default nfsargs size is more - * than 256 and so it is not possible to edit it - */ -#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) - -#define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_STACKBASE 0x2800000 /* 40MB */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 NV_PA_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ - -#define CONFIG_SYS_TEXT_BASE 0x0010c000 -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_TEGRA_GPIO -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_ENTERRCM -#define CONFIG_CMD_BOOTZ - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_RAM_DEVICE -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_TEXT_BASE 0x00108000 -#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SYS_SPL_MALLOC_START 0x00090000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 -#define CONFIG_SPL_STACK 0x000ffffc - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" - #define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_NAND_ONFI_DETECTION /* Misc utility code */ #define CONFIG_BOUNCE_BUFFER -#endif /* __TEGRA20_COMMON_H */ +#endif /* _TEGRA20_COMMON_H_ */ diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h new file mode 100644 index 0000000..04517e1 --- /dev/null +++ b/include/configs/tegra30-common.h @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2010-2012 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA30_COMMON_H_ +#define _TEGRA30_COMMON_H_ +#include "tegra-common.h" + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ + +/* + * High Level Configuration Options + */ +#define CONFIG_TEGRA30 /* in a NVidia Tegra30 core */ + +/* Environment information, boards can override if required */ +#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */ +#define CONFIG_STACKBASE 0x82800000 /* 40MB */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_SYS_TEXT_BASE 0x8010E000 + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x90000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x82000000\0" \ + "ramdisk_addr_r=0x82100000\0" + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 +#define CONFIG_SPL_STACK 0x800ffffc + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra30/u-boot-spl.lds" + +/* Total I2C ports on Tegra30 */ +#define TEGRA_I2C_NUM_CONTROLLERS 5 + +#endif /* _TEGRA30_COMMON_H_ */ |