diff options
Diffstat (limited to 'include/configs')
33 files changed, 427 insertions, 400 deletions
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 0d09f0e..45d1064 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -1,7 +1,7 @@ /* * Configuation settings for the Freescale MCF5373 FireEngine board. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -59,7 +59,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#ifdef NANDFLASH_SIZE +#ifdef CONFIG_NANDFLASH_SIZE # define CONFIG_CMD_NAND #endif @@ -208,7 +208,7 @@ # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif -#ifdef NANDFLASH_SIZE +#ifdef CONFIG_NANDFLASH_SIZE # define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE # define CONFIG_SYS_NAND_SIZE 1 @@ -264,9 +264,9 @@ #define CONFIG_SYS_CS1_MASK 0x001f0001 #define CONFIG_SYS_CS1_CTRL 0x002A3780 -#ifdef NANDFLASH_SIZE +#ifdef CONFIG_NANDFLASH_SIZE #define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK ((NANDFLASH_SIZE << 20) | 1) +#define CONFIG_SYS_CS2_MASK ((CONFIG_NANDFLASH_SIZE << 20) | 1) #define CONFIG_SYS_CS2_CTRL 0x00001f60 #endif diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 7f2761c..2d48dde 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -37,6 +37,24 @@ #define CONFIG_MISC_INIT_R +/* new uImage format support */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 + +#define CONFIG_MMC 1 + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ESDHC_USE_PIO + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* * On-board devices * @@ -340,6 +358,19 @@ #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 +/* + * SPI on header J8 + * + * WARNING: enabling this will break TSEC2 (connected to the Vitesse switch) + * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins. + */ +#ifdef CONFIG_MPC8XXX_SPI +#define CONFIG_CMD_SPI +#define CONFIG_USE_SPIFLASH +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#endif /* * Board info - revision and where boot from diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 1c0eb74..3169665 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -22,7 +22,7 @@ /* * P2041 RDB board configuration file - * + * Also supports P2040 RDB */ #ifndef __CONFIG_H #define __CONFIG_H @@ -36,6 +36,15 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ @@ -73,7 +82,7 @@ #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH -#ifndef CONFIG_RAMBOOT_PBL +#if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_NOWHERE #endif #else @@ -104,8 +113,12 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_ENV_IS_NOWHERE) - #define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ @@ -374,6 +387,35 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ /* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif + +/* * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI @@ -485,6 +527,16 @@ unsigned long get_board_sys_clk(unsigned long dummy); #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 diff --git a/include/configs/P3060QDS.h b/include/configs/P3060QDS.h deleted file mode 100644 index 8006547..0000000 --- a/include/configs/P3060QDS.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * P3060 QDS board configuration file - */ -#define CONFIG_P3060QDS -#define CONFIG_PHYS_64BIT -#define CONFIG_PPC_P3060 -#define CONFIG_FSL_QIXIS - -#define CONFIG_NAND_FSL_ELBC - -#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ - -#define CONFIG_SPI_FLASH_ATMEL -#define CONFIG_SPI_FLASH_EON -#define CONFIG_SPI_FLASH_SST - -#include "corenet_ds.h" - -#define SGMII_CARD_PORT1_PHY_ADDR 0x1C -#define SGMII_CARD_PORT2_PHY_ADDR 0x1D -#define SGMII_CARD_PORT3_PHY_ADDR 0x1E -#define SGMII_CARD_PORT4_PHY_ADDR 0x1F - -/* There is a PCA9547 8-channel I2C-bus multiplexer on P3060QDS board */ -#define CONFIG_I2C_MUX -#define CONFIG_I2C_MULTI_BUS diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index 4a2e475..d6f2f5c 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -22,6 +22,7 @@ /* * P4080 DS board configuration file + * Also supports P4040 DS */ #define CONFIG_P4080DS #define CONFIG_PHYS_64BIT diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h index 4afc4f1..8625f76 100644 --- a/include/configs/P5020DS.h +++ b/include/configs/P5020DS.h @@ -22,7 +22,7 @@ /* * P5020 DS board configuration file - * + * Also supports P5010 DS */ #define CONFIG_P5020DS #define CONFIG_PHYS_64BIT diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index a3752bc..263a5ad 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -193,6 +193,7 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (46 * 1024) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index f24b44d..8ddeff4 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -314,6 +314,8 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 95f8d78..6980811 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -313,6 +313,8 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h deleted file mode 100644 index b8ca8a8..0000000 --- a/include/configs/apollon.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * (C) Copyright 2005-2008 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park@samsung.com> - * - * Configuration settings for the 2420 Samsung Apollon board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ -#define CONFIG_OMAP2420_APOLLON 1 -#define CONFIG_APOLLON 1 -#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */ - -#define CONFIG_ONENAND_U_BOOT y - -/* Clock config to target*/ -#define PRCM_CONFIG_I 1 -/* #define PRCM_CONFIG_II 1 */ - -/* Boot method */ -/* uncomment if you use NOR boot */ -/* #define CONFIG_SYS_NOR_BOOT 1 */ - -/* uncomment if you use NOR on CS3 */ -/* #define CONFIG_SYS_USE_NOR 1 */ - -#ifdef CONFIG_SYS_NOR_BOOT -#undef CONFIG_SYS_USE_NOR -#define CONFIG_SYS_USE_NOR 1 -#endif - -/* uncommnet if you want to use UBI */ -#define CONFIG_SYS_USE_UBI - -#include <asm/arch/omap2420.h> /* get chip and board defs */ - -#define V_SCLK 12000000 - -/* input clock of PLL */ -/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ -#define CONFIG_SYS_CLK_FREQ V_SCLK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE_FLEX SZ_256K -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) - -/* - * Hardware drivers - */ - -/* - * SMC91c96 Etherent - */ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) -#define CONFIG_LAN91C96_EXT_PHY - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* UART1 on H4 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ONENAND - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#endif - -#undef CONFIG_CMD_SOURCE - -#ifndef CONFIG_SYS_USE_NOR -# undef CONFIG_CMD_FLASH -# undef CONFIG_CMD_IMLS -#endif - -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT - -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.116.25 -#define CONFIG_SERVERIP 192.168.116.1 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_ETHADDR 00:0E:99:00:24:20 - -#ifdef CONFIG_APOLLON_PLUS -#define CONFIG_SYS_MEM "mem=64M" -#else -#define CONFIG_SYS_MEM "mem=128" -#endif - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_SYS_UBI "ubi.mtd=4" -#else -#define CONFIG_SYS_UBI "" -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \ - " console=ttyS0,115200n8" \ - " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \ - "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \ - CONFIG_SYS_UBI - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "Image=tftp 0x80008000 Image; go 0x80008000\0" \ - "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \ - "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \ - "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \ - "xloader=tftp 0x80180000 x-load.bin; " \ - " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ - "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \ - "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \ - "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \ - "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \ - "onesyncboot=run syncmode oneboot\0" \ - "updateb=tftp 0x80180000 u-boot-onenand.bin; " \ - " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \ - "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \ - "bootcmd=run uboot\0" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Apollon # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) - -/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) - * or by 32KHz clk, or from external sig. This rate is divided by a local - * divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_128M -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#ifdef CONFIG_SYS_USE_NOR -/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ -# define CONFIG_SYS_FLASH_BASE 0x18000000 -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_MAX_FLASH_SECT 1024 -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* Flash memory is CFI compliant */ -# define CONFIG_SYS_FLASH_CFI 1 -# define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -/* Use buffered writes (~10x faster) */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ -/* Use h/w sector protection*/ -# define CONFIG_SYS_FLASH_PROTECTION 1 - -#else /* !CONFIG_SYS_USE_NOR */ -# define CONFIG_SYS_NO_FLASH 1 -#endif /* CONFIG_SYS_USE_NOR */ - -/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ -#define CONFIG_SYS_ONENAND_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* U-Boot image size */ -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_ADDR 0x00020000 -#define CONFIG_ENV_ADDR_FLEX 0x00040000 - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "onenand0=onenand" -#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(bootloader)," \ - "128k(params)," \ - "2m(kernel)," \ - "16m(rootfs)," \ - "32m(fs)," \ - "-(ubifs)" -#endif - -#define PHYS_SRAM 0x4020F800 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM - -#endif /* __CONFIG_H */ diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h new file mode 100644 index 0000000..f85374f --- /dev/null +++ b/include/configs/atngw100mkii.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com> + * + * Configuration settings for the AVR32 Network Gateway + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/hardware.h> + +#define CONFIG_AVR32 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_ATNGW100MKII + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CONFIG_SYS_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency + * and the PBA bus to run at 1/4 the PLL frequency. + */ +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER +#define CONFIG_SYS_OSC0_HZ 20000000 +#define CONFIG_SYS_PLL0_DIV 1 +#define CONFIG_SYS_PLL0_MUL 7 +#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz + */ +#define CONFIG_SYS_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz + */ +#define CONFIG_SYS_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz + */ +#define CONFIG_SYS_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz + */ +#define CONFIG_SYS_CLKDIV_PBB 1 + +/* Reserve VM regions for NOR flash, NAND flash and SDRAM */ +#define CONFIG_SYS_NR_VM_REGIONS 3 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CONFIG_SYS_PLL0_OPT 0x04 + +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "root=mtd:main rootfstype=jffs2" +#define CONFIG_BOOTCOMMAND \ + "fsload 0x10400000 /uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. + */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_NET_MULTI + +/* + * BOOTP/DHCP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO +#define CONFIG_SYS_NR_PIOS 5 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_GENERIC_MMC +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 +#define CONFIG_ATMEL_SPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL + +#define CONFIG_SYS_DCACHE_LINESZ 32 +#define CONFIG_SYS_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_PROTECTION + +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x800000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 65536 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) + +#define CONFIG_SYS_MALLOC_LEN (256*1024) +#define CONFIG_SYS_DMA_ALLOC_LEN (16384) + +/* Allow 4MB for the kernel run-time image */ +#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#endif /* __CONFIG_H */ diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 91ab812..9b56e02 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -215,10 +215,11 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_LOAD #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_POST_MEM_SUPPORT diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index f8f7a82..f4f9bd1 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -31,13 +31,21 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg +#if defined(CONFIG_P3041DS) +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg +#elif defined(CONFIG_P4080DS) +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg +#elif defined(CONFIG_P5020DS) +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#endif #endif -#ifdef CONFIG_SRIOBOOT_SLAVE +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE /* Set 1M boot space */ -#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) -#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #define CONFIG_SYS_NO_FLASH #endif @@ -77,7 +85,7 @@ #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH -#if !defined(CONFIG_SRIOBOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) #define CONFIG_ENV_IS_NOWHERE #endif #else @@ -108,7 +116,7 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIOBOOT_SLAVE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 #define CONFIG_ENV_SIZE 0x2000 @@ -186,11 +194,7 @@ #define CONFIG_DDR_SPD #define CONFIG_FSL_DDR3 -#ifdef CONFIG_P3060QDS -#define CONFIG_SYS_SPD_BUS_NUM 0 -#else #define CONFIG_SYS_SPD_BUS_NUM 1 -#endif #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ @@ -389,51 +393,32 @@ #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ /* - * SRIOBOOT - MASTER - */ -#ifdef CONFIG_SRIOBOOT_MASTER -/* master port for srioboot*/ -#define CONFIG_SRIOBOOT_MASTER_PORT 0 -/* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */ -/* * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull -#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull -#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull -#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull /* - * for slave UCODE instored in master memory space, + * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS 0xfef020000ull -#define CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS 0x3ffe00000ull -#define CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE 0x10000 /* 64K */ -/* - * for slave ENV instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS 0xfef060000ull -#define CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS 0x3ffe20000ull -#define CONFIG_SRIOBOOT_SLAVE_ENV_SIZE 0x20000 /* 128K */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + /* slave core release by master*/ -#define CONFIG_SRIOBOOT_SLAVE_HOLDOFF -#define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4 -#define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */ -#endif +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ /* - * SRIOBOOT - SLAVE + * SRIO_PCIE_BOOT - SLAVE */ -#ifdef CONFIG_SRIOBOOT_SLAVE -/* slave port for srioboot */ -#define CONFIG_SRIOBOOT_SLAVE_PORT0 -/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */ -#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000 -#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR) +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) #endif /* @@ -556,13 +541,13 @@ #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIOBOOT_SLAVE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing * in two corenet boards, slave's ucode could be stored in master's memory * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO outbound window->master inbound window->master LAW-> - * the ucode address in master's NOR flash. + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. */ #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 @@ -724,7 +709,7 @@ #define CONFIG_BAUDRATE 115200 -#if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS) +#ifdef CONFIG_P4080DS #define __USB_PHY_TYPE ulpi #else #define __USB_PHY_TYPE utmi diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 09a9660..ddd6155 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -380,6 +380,16 @@ #ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ + CONFIG_SYS_MALLOC_LEN) +#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -392,10 +402,9 @@ /* Load U-Boot Image From MMC */ #ifdef CONFIG_SPL_MMC_LOAD #define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SYS_MMC_U_BOOT_OFFS 0x75 -#define CONFIG_SYS_MMC_U_BOOT_SIZE 0x30000 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x75 +#undef CONFIG_SPL_SPI_SUPPORT #undef CONFIG_SPL_SPI_LOAD #endif diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index de75daf..2d2ee5f 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -303,6 +303,7 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 16f2d2a..46171b9 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -212,7 +212,6 @@ * NAND FLASH driver setup */ #define CONFIG_NAND_MXC -#define CONFIG_NAND_MXC_V1_1 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 73ab4c8..c0e3ed3 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -60,9 +60,10 @@ /* Spl */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_LOAD #define CONFIG_SPL_LIBGENERIC_SUPPORT /* for udelay and __div64_32 for NAND */ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-hawk.lds" @@ -79,6 +80,7 @@ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\ GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_MONITOR_LEN 0x60000 /* memtest start addr */ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) @@ -136,7 +138,6 @@ #define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 5468a1a..b1071e8 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -295,6 +295,7 @@ /* SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 733022e..359522a 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -359,6 +359,8 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_NAND_SOFTECC diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1266cf7..721cd90 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -115,19 +115,11 @@ #endif /* timer */ -#ifdef XILINX_TIMER_BASEADDR -# if (XILINX_TIMER_IRQ != -1) -# define CONFIG_SYS_TIMER_0 1 +#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ) # define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR # define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -# define FREQUENCE XILINX_CLOCK_FREQ -# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) -# endif -#elif XILINX_CLOCK_FREQ -# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ -#else -# error BAD CLOCK FREQ #endif + /* FSL */ /* #define CONFIG_SYS_FSL_2 */ /* #define FSL_INTR_2 1 */ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 38b1546..69bd654 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -236,7 +236,6 @@ * NAND FLASH driver setup */ #define CONFIG_NAND_MXC -#define CONFIG_NAND_MXC_V1_1 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 782a4c5..f79f996 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -391,6 +391,7 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index d9578f4..2ef3aaa 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -273,6 +273,7 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index dd4b2c0..f6d6f75 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -293,6 +293,7 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index ee0c4b9..cbc9bdb 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -232,9 +232,11 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40304350 #define CONFIG_SPL_MAX_SIZE (38 * 1024) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SPL_DISPLAY_PRINT /* * 64 bytes before this address should be set aside for u-boot.img's diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 4f0a6c1..743edfd 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -229,9 +229,11 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40300350 #define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index a8882d4..b18f4a0 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -31,7 +31,7 @@ #endif #if defined(CONFIG_P1020MBG) -#define CONFIG_BOARDNAME "P1020MBG" +#define CONFIG_BOARDNAME "P1020MBG-PC" #define CONFIG_P1020 #define CONFIG_VSC7385_ENET #define CONFIG_SLIC @@ -41,7 +41,7 @@ #endif #if defined(CONFIG_P1020UTM) -#define CONFIG_BOARDNAME "P1020UTM" +#define CONFIG_BOARDNAME "P1020UTM-PC" #define CONFIG_P1020 #define __SW_BOOT_MASK 0x03 #define __SW_BOOT_NOR 0xe0 @@ -49,7 +49,7 @@ #endif #if defined(CONFIG_P1020RDB) -#define CONFIG_BOARDNAME "P1020RDB" +#define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 #define CONFIG_SPI_FLASH @@ -64,7 +64,7 @@ #endif #if defined(CONFIG_P1021RDB) -#define CONFIG_BOARDNAME "P1021RDB" +#define CONFIG_BOARDNAME "P1021RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1021 #define CONFIG_QE @@ -111,7 +111,7 @@ #endif #if defined(CONFIG_P2020RDB) -#define CONFIG_BOARDNAME "P2020RDB" +#define CONFIG_BOARDNAME "P2020RDB-PCA" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P2020 #define CONFIG_SPI_FLASH diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 306c173..b8b9705 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -100,7 +100,12 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "qemu-mips # " /* Monitor Command Prompt */ +/* Monitor Command Prompt */ +#if defined(CONFIG_SYS_LITTLE_ENDIAN) +#define CONFIG_SYS_PROMPT "qemu-mipsel # " +#else +#define CONFIG_SYS_PROMPT "qemu-mips # " +#endif #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h index a3fc465..4bb5bbc 100644 --- a/include/configs/qi_lb60.h +++ b/include/configs/qi_lb60.h @@ -11,6 +11,7 @@ #define __CONFIG_QI_LB60_H #define CONFIG_MIPS32 /* MIPS32 CPU core */ +#define CONFIG_SYS_LITTLE_ENDIAN #define CONFIG_JZSOC /* Jz SoC */ #define CONFIG_JZ4740 /* Jz4740 SoC */ #define CONFIG_NAND_JZ4740 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index a13fd93..cbb6c7e 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -239,6 +239,8 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_CONSOLE #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_NAND_SOFTECC diff --git a/include/configs/trats.h b/include/configs/trats.h index 8a0deea..b3b5a3d 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -78,6 +78,7 @@ #define CONFIG_MMC #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI +#define CONFIG_MMC_SDMA /* PWM */ #define CONFIG_PWM @@ -97,6 +98,21 @@ #undef CONFIG_CMD_ONENAND #undef CONFIG_CMD_MTDPARTS #define CONFIG_CMD_MMC +#define CONFIG_CMD_DFU + +/* FAT */ +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE + +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC + +/* USB Samsung's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_MANUFACTURER "Samsung" #define CONFIG_BOOTDELAY 1 #define CONFIG_ZERO_BOOTDELAY_CHECK @@ -107,6 +123,11 @@ #define CONFIG_BOOTBLOCK "10" #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" +#define CONFIG_DFU_ALT \ + "dfu_alt_info=" \ + "u-boot mmc 80 400;" \ + "uImage fat 0 2\0" \ + #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_SYS_CONSOLE_IS_IN_ENV @@ -150,7 +171,8 @@ "mmcdev=0\0" \ "mmcbootpart=2\0" \ "mmcrootpart=3\0" \ - "opts=always_resume=1" + "opts=always_resume=1\0" \ + CONFIG_DFU_ALT /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -190,18 +212,28 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_CACHELINE_SIZE 32 -#include <asm/arch/gpio.h> -/* - * I2C Settings - */ -#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7) -#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6) #define CONFIG_SOFT_I2C #define CONFIG_SOFT_I2C_READ_REPEATED_START +#define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 7 +#define CONFIG_SOFT_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS 15 + +#include <asm/arch/gpio.h> + +/* I2C PMIC */ +#define CONFIG_SOFT_I2C_I2C5_SCL exynos4_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_I2C5_SDA exynos4_gpio_part1_get_nr(b, 6) + +/* I2C FG */ +#define CONFIG_SOFT_I2C_I2C9_SCL exynos4_gpio_part2_get_nr(y4, 1) +#define CONFIG_SOFT_I2C_I2C9_SDA exynos4_gpio_part2_get_nr(y4, 0) + +#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin() +#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin() +#define I2C_INIT multi_i2c_init() #define CONFIG_PMIC #define CONFIG_PMIC_I2C @@ -210,6 +242,7 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 /* LCD */ #define CONFIG_EXYNOS_FB diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 63c98dc..00d02e8 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -271,6 +271,7 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/tx25.h b/include/configs/tx25.h index c8a49bb..71b1d32 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -107,7 +107,6 @@ /* NAND */ #define CONFIG_NAND_MXC -#define CONFIG_NAND_MXC_V1_1 #define CONFIG_MXC_NAND_REGS_BASE (0xBB000000) #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (0xBB000000) |