diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/am335x_evm.h | 6 | ||||
| -rw-r--r-- | include/configs/apf27.h | 388 | ||||
| -rw-r--r-- | include/configs/dra7xx_evm.h | 8 | ||||
| -rw-r--r-- | include/configs/eb_cpux9k2.h | 2 | ||||
| -rw-r--r-- | include/configs/mx35pdk.h | 1 | ||||
| -rw-r--r-- | include/configs/mx6sabresd.h | 4 | ||||
| -rw-r--r-- | include/configs/mx6slevk.h | 14 | ||||
| -rw-r--r-- | include/configs/pcm051.h | 1 | ||||
| -rw-r--r-- | include/configs/sansa_fuze_plus.h | 70 | ||||
| -rw-r--r-- | include/configs/wandboard.h | 4 | ||||
| -rw-r--r-- | include/configs/xfi3.h | 69 |
11 files changed, 561 insertions, 6 deletions
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 978fdf9..3482470 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -171,6 +171,7 @@ "run mmcboot;" \ "setenv mmcdev 1; " \ "setenv bootpart 1:2; " \ + "setenv mmcroot /dev/mmcblk1p2 ro; " \ "run mmcboot;" \ "run nandboot;" @@ -190,8 +191,13 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_MULTI_EEPROMS +/* PMIC support */ +#define CONFIG_POWER_TPS65217 +#define CONFIG_POWER_TPS65910 + /* SPL */ #ifndef CONFIG_NOR_BOOT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* CPSW support */ diff --git a/include/configs/apf27.h b/include/configs/apf27.h new file mode 100644 index 0000000..e7e258f --- /dev/null +++ b/include/configs/apf27.h @@ -0,0 +1,388 @@ +/* + * + * Configuration settings for the Armadeus Project motherboard APF27 + * + * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_VERSION_VARIABLE +#define CONFIG_ENV_VERSION 10 +#define CONFIG_IDENT_STRING " apf27 patch 3.10" +#define CONFIG_BOARD_NAME apf27 + +/* + * SoC configurations + */ +#define CONFIG_ARM926EJS /* this is an ARM926EJS CPU */ +#define CONFIG_MX27 /* in a Freescale i.MX27 Chip */ +#define CONFIG_MACH_TYPE 1698 /* APF27 */ +#define CONFIG_SYS_GENERIC_BOARD + +/* + * Enable the call to miscellaneous platform dependent initialization. + */ +#define CONFIG_SYS_NO_FLASH /* to be define before <config_cmd_default.h> */ + +/* + * Board display option + */ +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DISPLAY_CPUINFO + +/* + * SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_MAX_SIZE 2048 +#define CONFIG_SPL_TEXT_BASE 0xA0000000 + +/* NAND boot config */ +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_SIZE CONFIG_SYS_MONITOR_LEN - 0x800 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 + +#define CONFIG_HOSTNAME CONFIG_BOARD_NAME +#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" + +/* + * U-Boot Commands + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV /* ask for env variable */ +#define CONFIG_CMD_BSP /* Board Specific functions */ +#define CONFIG_CMD_CACHE /* icache, dcache */ +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP /* DHCP Support */ +#define CONFIG_CMD_DNS +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_IMX_FUSE /* imx iim fuse */ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII /* MII support */ +#define CONFIG_CMD_MMC +#define CONFIG_CMD_MTDPARTS /* MTD partition support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_NAND_LOCK_UNLOCK +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_PING /* ping support */ +#define CONFIG_CMD_SETEXPR /* setexpr support */ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_POPULATED 1 +#define CONFIG_NR_DRAM_BANKS 2 + +#define ACFG_SDRAM_MBYTE_SYZE 64 + +#define PHYS_SDRAM_1 0xA0000000 +#define PHYS_SDRAM_2 0xB0000000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512<<10)) +#define CONFIG_SYS_MEMTEST_START 0xA0000000 /* memtest test area */ +#define CONFIG_SYS_MEMTEST_END 0xA0300000 /* 3 MiB RAM test */ + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE \ + + PHYS_SDRAM_1_SIZE - 0x0100000) + +#define CONFIG_SYS_TEXT_BASE 0xA0000800 + +/* + * FLASH organization + */ +#define ACFG_MONITOR_OFFSET 0x00000000 +#define CONFIG_SYS_MONITOR_LEN 0x00100000 /* 1MiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_OFFSET 0x00100000 /* NAND offset */ +#define CONFIG_ENV_SIZE 0x00020000 /* 128kB */ +#define CONFIG_ENV_RANGE 0X00080000 /* 512kB */ +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) /* +512kB */ +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* 512kB */ +#define CONFIG_FIRMWARE_OFFSET 0x00200000 +#define CONFIG_FIRMWARE_SIZE 0x00080000 /* 512kB */ +#define CONFIG_KERNEL_OFFSET 0x00300000 +#define CONFIG_ROOTFS_OFFSET 0x00800000 + +#define CONFIG_MTDMAP "mxc_nand.0" +#define MTDIDS_DEFAULT "nand0=" CONFIG_MTDMAP +#define MTDPARTS_DEFAULT "mtdparts=" CONFIG_MTDMAP \ + ":1M(u-boot)ro," \ + "512K(env)," \ + "512K(env2)," \ + "512K(firmware)," \ + "512K(dtb)," \ + "5M(kernel)," \ + "-(rootfs)" + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "BIOS> " /* prompt string */ +#define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 16 /* max command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER /* enable the "hush" shell */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* secondary prompt string */ +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_PREBOOT "run check_flash check_env;" + + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ +#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ +#define CONFIG_INITRD_TAG /* send initrd params */ + +#define CONFIG_OF_LIBFDT + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin" +#define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \ + __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \ + " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs " + +#define ACFG_CONSOLE_DEV ttySMX0 +#define CONFIG_BOOTCOMMAND "run ubifsboot" +#define CONFIG_SYS_AUTOLOAD "no" +/* + * Default load address for user programs and kernel + */ +#define CONFIG_LOADADDR 0xA0000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* + * Extra Environments + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ + "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,6\0" \ + "u-boot_addr=" __stringify(ACFG_MONITOR_OFFSET) "\0" \ + "env_addr=" __stringify(CONFIG_ENV_OFFSET) "\0" \ + "firmware_addr=" __stringify(CONFIG_FIRMWARE_OFFSET) "\0" \ + "firmware_size=" __stringify(CONFIG_FIRMWARE_SIZE) "\0" \ + "kernel_addr=" __stringify(CONFIG_KERNEL_OFFSET) "\0" \ + "rootfs_addr=" __stringify(CONFIG_ROOTFS_OFFSET) "\0" \ + "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \ + "kernel_addr_r=A0000000\0" \ + "check_env=if test -n ${flash_env_version}; " \ + "then env default env_version; " \ + "else env set flash_env_version ${env_version}; env save; "\ + "fi; " \ + "if itest ${flash_env_version} < ${env_version}; then " \ + "echo \"*** Warning - Environment version" \ + " change suggests: run flash_reset_env; reset\"; "\ + "env default flash_reset_env; "\ + "fi; \0" \ + "check_flash=nand lock; nand unlock ${env_addr}; \0" \ + "flash_reset_env=env default -f -a; saveenv; run update_env;" \ + "echo Flash environment variables erased!\0" \ + "download_uboot=tftpboot ${loadaddr} ${board_name}" \ + "-u-boot-with-spl.bin\0" \ + "flash_uboot=nand unlock ${u-boot_addr} ;" \ + "nand erase.part u-boot;" \ + "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\ + "then nand lock; nand unlock ${env_addr};" \ + "echo Flashing of uboot succeed;" \ + "else echo Flashing of uboot failed;" \ + "fi; \0" \ + "update_uboot=run download_uboot flash_uboot\0" \ + "download_env=tftpboot ${loadaddr} ${board_name}" \ + "-u-boot-env.txt\0" \ + "flash_env=env import -t ${loadaddr}; env save; \0" \ + "update_env=run download_env flash_env\0" \ + "update_all=run update_env update_uboot\0" \ + "unlock_regs=mw 10000008 0; mw 10020008 0\0" \ + +/* + * Serial Driver + */ +#define CONFIG_MXC_UART +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* + * GPIO + */ +#define CONFIG_MXC_GPIO + +/* + * NOR + */ + +/* + * NAND + */ +#define CONFIG_NAND_MXC + +#define CONFIG_MXC_NAND_REGS_BASE 0xD8000000 +#define CONFIG_SYS_NAND_BASE CONFIG_MXC_NAND_REGS_BASE +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#define CONFIG_SYS_NAND_PAGE_COUNT CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE +#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 11 +#define NAND_MAX_CHIPS 1 + +#define CONFIG_FLASH_SHOW_PROGRESS 45 +#define CONFIG_SYS_NAND_QUIET 1 + +/* + * Partitions & Filsystems + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT + +/* + * UBIFS + */ +#define CONFIG_RBTREE +#define CONFIG_LZO + +/* + * Ethernet (on SOC imx FEC) + */ +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0x1f +#define CONFIG_MII /* MII PHY management */ + +/* + * FPGA + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_FPGA +#endif +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_SPARTAN3 +#define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */ +#define CONFIG_SYS_FPGA_PROG_FEEDBACK +#define CONFIG_SYS_FPGA_CHECK_CTRLC +#define CONFIG_SYS_FPGA_CHECK_ERROR + +/* + * Fuses - IIM + */ +#ifdef CONFIG_CMD_IMX_FUSE +#define IIM_MAC_BANK 0 +#define IIM_MAC_ROW 5 +#define IIM0_SCC_KEY 11 +#define IIM1_SUID 1 +#endif + +/* + * I2C + */ + +#ifdef CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_BASE IMX_I2C1_BASE +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_NOPROBES { } + +#ifdef CONFIG_CMD_EEPROM +# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24LC02 */ +# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* msec */ +#endif /* CONFIG_CMD_EEPROM */ +#endif /* CONFIG_CMD_I2C */ + +/* + * SD/MMC + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MXC_MMC +#define CONFIG_MXC_MCI_REGS_BASE 0x10014000 +#endif + +/* + * RTC + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_DS1374 +#define CONFIG_SYS_RTC_BUS_NUM 0 +#endif /* CONFIG_CMD_DATE */ + +/* + * Clocks + */ +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ + +/* + * PLL + * + * 31 | x |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0 + * |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------| + */ +#define CONFIG_MX27_CLK32 32768 /* 32768 or 32000 Hz crystal */ + +#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */ +/* micron 64MB */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ +#endif + +#if (ACFG_SDRAM_MBYTE_SYZE == 128) +/* micron 128MB */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ +#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ +#endif + +#if (ACFG_SDRAM_MBYTE_SYZE == 256) +/* micron 256MB */ +#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ +#define PHYS_SDRAM_2_SIZE 0x10000000 /* 256 MB */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 4fbe768..7b120de 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -14,7 +14,13 @@ #define CONFIG_DRA7XX -#define CONFIG_ENV_IS_NOWHERE /* For now. */ +/* MMC ENV related defines */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ +#define CONFIG_ENV_OFFSET 0xE0000 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_CMD_SAVEENV #define CONSOLEDEV "ttyO0" #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index ccc7bd0..b8e672f 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -83,7 +83,7 @@ * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 520*1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* * sdram diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 68b225a..a25b20e 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -23,7 +23,6 @@ /* Set TEXT at the beginning of the NOR flash */ #define CONFIG_SYS_TEXT_BASE 0xA0000000 -#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index a3dd74a..3229bc7 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -16,7 +16,11 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONSOLE_DEV "ttymxc0" #define CONFIG_MMCROOT "/dev/mmcblk1p2" +#if defined(CONFIG_MX6Q) #define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb" +#elif defined(CONFIG_MX6DL) +#define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabresd.dtb" +#endif #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #include "mx6sabre_common.h" diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index ca8f2f6..792f17c 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -44,6 +44,20 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index e2b4de7..2fff0be 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -201,6 +201,7 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT /* * Place the image at the start of the ROM defined image space. * We limit our size to the ROM-defined downloaded image area, and use the diff --git a/include/configs/sansa_fuze_plus.h b/include/configs/sansa_fuze_plus.h new file mode 100644 index 0000000..a85eb1c --- /dev/null +++ b/include/configs/sansa_fuze_plus.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIGS_SANSA_FUZE_PLUS_H__ +#define __CONFIGS_SANSA_FUZE_PLUS_H__ + +/* System configurations */ +#define CONFIG_MX23 /* i.MX23 SoC */ + +/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_VIDEO +#define CONFIG_CMD_MEMTEST + +/* Memory configuration */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Environment */ +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_OVERWRITE + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* LCD */ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_FONT_4X6 +#define CONFIG_VIDEO_MXS_MODE_SYSTEM +#define CONFIG_SYS_BLACK_IN_WRITE +#define LCD_BPP LCD_COLOR16 +#endif + +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_MV_UDC /* ChipIdea CI13xxx UDC */ +#define CONFIG_USB_GADGET_DUALSPEED + +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_CDC +#define CONFIG_NETCONSOLE +#endif + +/* The rest of the configuration is shared */ +#include <configs/mxs.h> + +#endif /* __CONFIGS_SANSA_FUZE_PLUS_H__ */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 665cfc3..442a984 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -99,12 +99,10 @@ #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_IMX_HDMI -#if defined(CONFIG_MX6DL) +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb" #elif defined(CONFIG_MX6Q) #define CONFIG_DEFAULT_FDT_FILE "imx6q-wandboard.dtb" -#elif defined(CONFIG_MX6S) -#define CONFIG_DEFAULT_FDT_FILE "imx6s-wandboard.dtb" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h new file mode 100644 index 0000000..022bc95 --- /dev/null +++ b/include/configs/xfi3.h @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIGS_XFI3_H__ +#define __CONFIGS_XFI3_H__ + +/* System configurations */ +#define CONFIG_MX23 /* i.MX23 SoC */ + +/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_VIDEO + +/* Memory configuration */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Environment */ +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_OVERWRITE + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* LCD */ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_FONT_4X6 +#define CONFIG_VIDEO_MXS_MODE_SYSTEM +#define CONFIG_SYS_BLACK_IN_WRITE +#define LCD_BPP LCD_COLOR16 +#endif + +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_MV_UDC /* ChipIdea CI13xxx UDC */ +#define CONFIG_USB_GADGET_DUALSPEED + +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_CDC +#define CONFIG_NETCONSOLE +#endif + +/* The rest of the configuration is shared */ +#include <configs/mxs.h> + +#endif /* __CONFIGS_XFI3_H__ */ |