diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/am3517_evm.h | 296 | ||||
| -rw-r--r-- | include/configs/da850evm.h | 140 | ||||
| -rw-r--r-- | include/configs/devkit8000.h | 2 | ||||
| -rw-r--r-- | include/configs/edminiv2.h | 172 | ||||
| -rw-r--r-- | include/configs/omap3_beagle.h | 2 | ||||
| -rw-r--r-- | include/configs/omap3_evm.h | 10 | ||||
| -rw-r--r-- | include/configs/omap3_overo.h | 2 | ||||
| -rw-r--r-- | include/configs/omap3_pandora.h | 2 | ||||
| -rw-r--r-- | include/configs/omap3_sdp3430.h | 2 | ||||
| -rw-r--r-- | include/configs/omap3_zoom1.h | 2 | ||||
| -rw-r--r-- | include/configs/omap3_zoom2.h | 2 | ||||
| -rw-r--r-- | include/configs/pm9g45.h | 186 | ||||
| -rw-r--r-- | include/configs/s5p_goni.h | 217 | ||||
| -rw-r--r-- | include/configs/smdk6400.h | 8 | ||||
| -rw-r--r-- | include/configs/tnetv107x_evm.h | 153 |
15 files changed, 1193 insertions, 3 deletions
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h new file mode 100644 index 0000000..513d005 --- /dev/null +++ b/include/configs/am3517_evm.h @@ -0,0 +1,296 @@ +/* + * am3517_evm.h - Default configuration for AM3517 EVM board. + * + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Based on omap3_evm_config.h + * + * Copyright (C) 2010 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */ + +#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ +/* + * DDR related + */ +#define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */ +#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on AM3517 EVM */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +#undef CONFIG_CMD_NET +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access */ + /* nand at CS0 */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ + /* NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "AM3517_EVM # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */ + +/* + * AM3517 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ + /* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_ENV_IS_IN_NAND 1 +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR boot_flash_env_addr + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#ifndef __ASSEMBLY__ +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h new file mode 100644 index 0000000..357715d --- /dev/null +++ b/include/configs/da850evm.h @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_DA850_EVM +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 25000 +#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ + +/* + * U-Boot general configuration + */ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "DA850-evm > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#if !defined(CONFIG_USE_NAND) && \ + !defined(CONFIG_USE_NOR) && \ + !defined(CONFIG_USE_SPIFLASH) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ENV +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 7d1332f..1076de6 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -38,6 +38,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h new file mode 100644 index 0000000..c3d95a0 --- /dev/null +++ b/include/configs/edminiv2.h @@ -0,0 +1,172 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * + * Based on original Kirkwood support which is + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_EDMINIV2_H +#define _CONFIG_EDMINIV2_H + +/* + * Version number information + */ + +#define CONFIG_IDENT_STRING " EDMiniV2" + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_MARVELL 1 +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ +#define CONFIG_FEROCEON 1 /* CPU Core subversion */ +#define CONFIG_ORION5X 1 /* SOC Family Name */ +#define CONFIG_88F5182 1 /* SOC Name */ +#define CONFIG_MACH_EDMINIV2 1 /* Machine type */ + +/* + * CLKs configurations + */ + +#define CONFIG_SYS_HZ 1000 + +/* + * Board-specific values for Orion5x MPP low level init: + * - MPPs 12 to 15 are SATA LEDs (mode 5) + * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for + * MPP16 to MPP19, mode 0 for others + */ + +#define ORION5X_MPP0_7 0x00000003 +#define ORION5X_MPP8_15 0x55550000 +#define ORION5X_MPP16_23 0x00000000 + +/* + * Board-specific values for Orion5x GPIO low level init: + * - GPIO3 is input (RTC interrupt) + * - GPIO16 is Power LED control (0 = on, 1 = off) + * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16) + * - GPIO18 is Power Button status (0 = Released, 1 = Pressed) + * - Last GPIO is 26, further bits are supposed to be 0. + * Enable mask has ones for INPUT, 0 for OUTPUT. + * Default is LED ON. + */ + +#define ORION5X_GPIO_OUT_ENABLE 0x03fcffff +#define ORION5X_GPIO_OUT_VALUE 0x03fcffff + +/* + * NS16550 Configuration + */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 ORION5X_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE \ + { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 } + +/* + * FLASH configuration + */ + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_BASE 0xfff80000 +#define CONFIG_SYS_FLASH_SECTSZ \ + {16384, 8192, 8192, 32768, \ + 65536, 65536, 65536, 65536, 65536, 65536, 65536} + +/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ + +#define CONFIG_SYS_PROMPT "EDMiniV2> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ +/* + * Commands configuration - using default command set for now + */ +#include <config_cmd_default.h> +/* + * Disabling some default commands for staggered bring-up + */ +#undef CONFIG_CMD_BOOTD /* no bootd since no net */ +#undef CONFIG_CMD_NET /* no net since no eth */ +#undef CONFIG_CMD_NFS /* no NFS since no net */ + +/* + * Environment variables configurations + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x2000 /* 16K */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x4000 /* env starts here */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required minimal configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_STACKSIZE 0x00100000 +#define CONFIG_SYS_LOAD_ADDR 0x00800000 +#define CONFIG_SYS_MEMTEST_START 0x00400000 +#define CONFIG_SYS_MEMTEST_END 0x007fffff +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 +#define CONFIG_SYS_MAXARGS 16 + +#endif /* _CONFIG_EDMINIV2_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 08d79ac..e018b21 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -37,6 +37,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 0d99f7d..af7c65a 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -42,6 +42,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_EVM 1 /* working with EVM */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> @@ -151,7 +153,7 @@ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_ONENAND /* ONENAND support */ +#define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING @@ -306,7 +308,13 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#if defined(CONFIG_CMD_NAND) +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_ENV_IS_IN_NAND +#elif defined(CONFIG_CMD_ONENAND) #define CONFIG_ENV_IS_IN_ONENAND 1 +#endif #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index a43500b..b441831 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -29,6 +29,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_OVERO 1 /* working with overo */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 945c053..9eba003 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -32,6 +32,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_PANDORA 1 /* working with pandora */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index b4919db..d4482d3 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -42,6 +42,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index ae7ebf9..1e88dc0 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -38,6 +38,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index c88c732..be9daf4 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -39,6 +39,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h new file mode 100644 index 0000000..690f119 --- /dev/null +++ b/include/configs/pm9g45.h @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2010 + * Ilko Iliev <iliev@ronetix.at> + * Asen Dimov <dimov@ronetix.at> + * Ronetix GmbH <www.ronetix.at> + * + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the PM9G45 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */ +#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */ + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_AT91_GPIO 1 +#define CONFIG_ATMEL_USART 1 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_SYS_USE_NANDFLASH 1 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */ +#define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +#define CONFIG_CMD_JFFS2 1 +#define CONFIG_JFFS2_CMDLINE 1 +#define CONFIG_JFFS2_NAND 1 +#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */ +#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */ + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x70000000 +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +/* NOR flash, not available */ +#define CONFIG_SYS_NO_FLASH 1 +#undef CONFIG_CMD_FLASH + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MAX_CHIPS 1 +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3 + +#endif + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000 + +#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" +#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \ + "console=ttyS0,115200 " \ + "root=/dev/mtdblock4 " \ + "mtdparts=atmel_nand:128k(bootstrap)ro," \ + "256k(uboot)ro,1664k(env)," \ + "2M(linux)ro,-(root) rw " \ + "rootfstype=jffs2" + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\ + 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h new file mode 100644 index 0000000..171ec94 --- /dev/null +++ b/include/configs/s5p_goni.h @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * Configuation settings for the SAMSUNG Universal (s5pc100) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ +#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ +#define CONFIG_S5PC110 1 /* which is in a S5PC110 */ +#define CONFIG_MACH_GONI 1 /* working with Goni */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* input clock of PLL: has 24MHz input clock at S5PC110 */ +#define CONFIG_SYS_CLK_FREQ_C110 24000000 + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x30000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* + * Size of malloc() pool + * 1MB = 0x100000, 0x100000 = 1024 * 1024 + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ + /* initial data */ +/* + * select serial console configuration + */ +#define CONFIG_SERIAL2 1 /* use SERIAL2 */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_BAUDRATE 115200 + +/* It should define before config_cmd_default.h */ +#define CONFIG_SYS_NO_FLASH 1 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ONENAND +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ +#define MTDIDS_DEFAULT "onenand0=samsung-onenand" +#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:1m(bootloader)"\ + ",256k(params)"\ + ",2816k(config)"\ + ",8m(csa)"\ + ",7m(kernel)"\ + ",1m(log)"\ + ",12m(modem)"\ + ",60m(qboot)"\ + ",-(UBI)\0" + +#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT + +#define CONFIG_BOOTCOMMAND "run ubifsboot" + +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ + " ${console} ${meminfo}" + +#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" + +#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \ + " rootfstype=cramfs " CONFIG_COMMON_BOOT + +#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ + " onenand write 0x32008000 0x0 0x100000\0" + +#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6" + +#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_UPDATEB \ + "updatek=" \ + "onenand erase 0xc00000 0x600000;" \ + "onenand write 0x31008000 0xc00000 0x600000\0" \ + "updateu=" \ + "onenand erase 0x01560000 0x1eaa0000;" \ + "onenand write 0x32000000 0x1260000 0x8C0000\0" \ + "bootk=" \ + "onenand read 0x30007FC0 0xc00000 0x600000;" \ + "bootm 0x30007FC0\0" \ + "flashboot=" \ + "set bootargs root=/dev/mtdblock${bootblock} " \ + "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \ + "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \ + "ubifsboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; run bootk\0" \ + "tftpboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \ + "bootm 0x30007FC0\0" \ + "ramboot=" \ + "set bootargs " CONFIG_RAMDISK_BOOT \ + " initrd=0x33000000,8M ramdisk=8192\0" \ + "mmcboot=" \ + "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \ + CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; run bootk\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ + "verify=n\0" \ + "rootfstype=cramfs\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "mtdparts=" MTDPARTS_DEFAULT \ + "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \ + "mmcblk=/dev/mmcblk1p1\0" \ + "bootblock=9\0" \ + "ubiblock=8\0" \ + "ubi=enabled\0" \ + "opts=always_resume=1" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Goni # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ + +/* Goni has 3 banks of DRAM, but swap the bank */ +#define CONFIG_NR_DRAM_BANKS 3 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ +#define PHYS_SDRAM_1_SIZE (80 << 20) /* 80 MB in Bank #0 */ +#define PHYS_SDRAM_2 0x40000000 /* mDDR DMC1 Bank #1 */ +#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in Bank #1 */ +#define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */ +#define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ + +/* FLASH and environment organization */ +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */ +#define CONFIG_ENV_ADDR (1 << 20) /* 1 MB, 0x100000 */ + +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_SAMSUNG_ONENAND 1 +#define CONFIG_SYS_ONENAND_BASE 0xB0000000 + +#define CONFIG_DOS_PARTITION 1 + +#endif /* __CONFIG_H */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f04feae..624fe04 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -40,6 +40,12 @@ #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_PERIPORT_REMAP +#define CONFIG_PERIPORT_BASE 0x70000000 +#define CONFIG_PERIPORT_SIZE 0x13 + #define CONFIG_SYS_SDRAM_BASE 0x50000000 /* input clock of PLL: SMDK6400 has 12MHz input clock */ @@ -61,8 +67,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* * Size of malloc() pool */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h new file mode 100644 index 0000000..454e9b2 --- /dev/null +++ b/include/configs/tnetv107x_evm.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/sizes.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> + +/* Architecture, CPU, etc */ +#define CONFIG_ARM1176 +#define CONFIG_TNETV107X +#define CONFIG_TNETV107X_EVM +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_UBOOT_BASE TEXT_BASE +#define CONFIG_DISABLE_TCM +#define CONFIG_PERIPORT_REMAP +#define CONFIG_PERIPORT_BASE 0x2000000 +#define CONFIG_PERIPORT_SIZE 0x10 +#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM) + +#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_PLL_SYS_EXT_FREQ 25000000 +#define CONFIG_PLL_TDM_EXT_FREQ 19200000 +#define CONFIG_PLL_ETH_EXT_FREQ 25000000 + +/* Memory Info */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE +#define PHYS_SDRAM_1_SIZE 0x04000000 +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_STACKSIZE (256*1024) + +/* Serial Driver Info */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE +#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Flash and environment info */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_NAND_DAVINCI +#define CONFIG_ENV_SIZE (SZ_128K) +#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_NAND_1BIT_ECC +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE +#define CONFIG_SYS_CLE_MASK 0x10 +#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_JFFS2_NAND +#define NAND_MAX_CHIPS 1 +#define CONFIG_ENV_OFFSET 0x180000 +#define DEF_BOOTM "" + +/* + * davinci_nand is a bit of a misnomer since this particular EMIF block is + * commonly used across multiple TI devices. Unfortunately, this misnomer + * (amongst others) carries forward into the kernel too. Consequently, if we + * use a different device name here, the mtdparts variable won't be usable as + * a kernel command-line argument. + */ +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" +#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ + "1536k(uboot)ro," \ + "128k(params)ro," \ + "4m(kernel)," \ + "-(filesystem)" + +/* General U-Boot configuration */ +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_SYS_PROMPT "U-Boot > " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \ + 0x700000) +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \ + "root=/dev/mmcblk0p1 rw noinitrd" +#define CONFIG_BOOTCOMMAND "" +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EDITENV +#define CONFIG_CMD_IMI +#define CONFIG_CMD_ITEST +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NAND +#define CONFIG_CMD_JFFS2 + +#endif /* __CONFIG_H */ |