diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/MERGERBOX.h | 619 |
1 files changed, 619 insertions, 0 deletions
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h new file mode 100644 index 0000000..f9681cd --- /dev/null +++ b/include/configs/MERGERBOX.h @@ -0,0 +1,619 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Copyright (C) 2011 Matrix Vision GmbH + * Andre Schwarz <andre.schwarz@matrix-vision.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <version.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83xx 1 +#define CONFIG_MPC837x 1 +#define CONFIG_MPC8377 1 + +#define CONFIG_SYS_TEXT_BASE 0xFC000000 + +#define CONFIG_PCI 1 + +#define CONFIG_MASK_AER_AO +#define CONFIG_DISPLAY_AER_FULL + +#define CONFIG_MISC_INIT_R + +/* + * On-board devices + */ +#define CONFIG_TSEC_ENET + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ +#define CONFIG_PCIE +#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +/* + * Hardware Reset Configuration Word stored in EEPROM. + */ +#define CONFIG_SYS_HRCW_LOW 0 +#define CONFIG_SYS_HRCW_HIGH 0 + +/* Arbiter Configuration Register */ +#define CONFIG_SYS_ACR_PIPE_DEP 3 +#define CONFIG_SYS_ACR_RPTCNT 3 + +/* System Priority Control Regsiter */ +#define CONFIG_SYS_SPCR_TSECEP 3 + +/* System Clock Configuration Register */ +#define CONFIG_SYS_SCCR_TSEC1CM 3 +#define CONFIG_SYS_SCCR_TSEC2CM 0 +#define CONFIG_SYS_SCCR_SDHCCM 3 +#define CONFIG_SYS_SCCR_ENCCM 3 /* also clock for I2C-1 */ +#define CONFIG_SYS_SCCR_USBDRCM CONFIG_SYS_SCCR_ENCCM /* must match */ +#define CONFIG_SYS_SCCR_PCIEXP1CM 3 +#define CONFIG_SYS_SCCR_PCIEXP2CM 3 +#define CONFIG_SYS_SCCR_PCICM 1 +#define CONFIG_SYS_SCCR_SATACM 0xFF + +/* + * System IO Config + */ +#define CONFIG_SYS_SICRH 0x087c0000 +#define CONFIG_SYS_SICRL 0x40000000 + +/* + * Output Buffer Impedance + */ +#define CONFIG_SYS_OBIR 0x30000000 + +/* + * IMMR new address + */ +#define CONFIG_SYS_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CONFIG_SYS_DDR_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_83XX_DDR_USES_CS0 + +#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN | DDRCDR_PZ_HIZ |\ + DDRCDR_NZ_HIZ | DDRCDR_ODT |\ + DDRCDR_Q_DRN) + +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + +#define CONFIG_SYS_DDR_MODE_WEAK +#define CONFIG_SYS_DDR_WRITE_DATA_DELAY 2 +#define CONFIG_SYS_DDR_CPO 0x1f + +/* SPD table located at offset 0x20 in extended adressing ROM + * used for HRCW fetch after power-on reset + */ +#define CONFIG_SPD_EEPROM +#define SPD_EEPROM_ADDRESS 0x50 +#define SPD_EEPROM_OFFSET 0x20 +#define SPD_EEPROM_ADDR_LEN 2 + +/* + * The reserved memory + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (512*1024) +#define CONFIG_SYS_MALLOC_LEN (512*1024) + +/* + * Initial RAM Base Address Setup + */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ + CONFIG_SYS_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 +#define CONFIG_SYS_LBC_LBCR 0x00000000 +#define CONFIG_FSL_ELBC 1 + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_FLASH_SIZE 64 + +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) + +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_FLASH_BASE | OR_UPM_XAM |\ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 |\ + OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX |\ + OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +/* + * NAND Flash on the Local Bus + */ +#define CONFIG_MTD_NAND_VERIFY_WRITE 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_NAND_FSL_ELBC 1 + +#define CONFIG_SYS_NAND_BASE 0xE0600000 +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | (2<<BR_DECC_SHIFT) |\ + BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 | OR_FCM_BCTLD | OR_FCM_CST |\ + OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST |\ + OR_FCM_TRLX | OR_FCM_EHTR) + +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) + +#define CONFIG_CONSOLE ttyS0 +#define CONFIG_BAUDRATE 115200 + +/* SERDES */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 +#define CONFIG_FSL_SERDES2 0xe3100 + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* I2C */ +#define CONFIG_HARD_I2C +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 120000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCI_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE +#define CONFIG_SYS_PCI_MEM_SIZE (256 << 20) +#define CONFIG_SYS_PCI_MMIO_BASE 0x90000000 +#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE +#define CONFIG_SYS_PCI_MMIO_SIZE (256 << 20) +#define CONFIG_SYS_PCI_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI_IO_PHYS 0xE0300000 +#define CONFIG_SYS_PCI_IO_SIZE (1 << 20) + +#ifdef CONFIG_PCIE +#define CONFIG_SYS_PCIE1_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_CFG_SIZE (128 << 20) +#define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE (256 << 20) +#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000 +#define CONFIG_SYS_PCIE1_IO_SIZE (8 << 20) + +#define CONFIG_SYS_PCIE2_BASE 0xC0000000 +#define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000 +#define CONFIG_SYS_PCIE2_CFG_SIZE (128 << 20) +#define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE (256 << 20) +#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000 +#define CONFIG_SYS_PCIE2_IO_SIZE (8 << 20) +#endif + +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +/* + * TSEC + */ +#define CONFIG_NET_MULTI +#define CONFIG_GMII /* MII PHY management */ +#define CONFIG_SYS_VSC8601_SKEWFIX +#define CONFIG_SYS_VSC8601_SKEW_TX 3 +#define CONFIG_SYS_VSC8601_SKEW_RX 3 + +#define CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x10 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC1_PHYIDX 0 + +#define CONFIG_ETHPRIME "TSEC0" +#define CONFIG_HAS_ETH0 + +/* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1_OFFSET 0x18000 +#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2_OFFSET 0x19000 +#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_VENDOREX +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_RANDOM_DELAY +#define CONFIG_BOOTP_SEND_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_USB +#define CONFIG_CMD_SPI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_SATA + +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 + +#define CONFIG_RBTREE +#define CONFIG_LZO + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=NOR,nand0=NAND" +#define MTDPARTS_DEFAULT "mtdparts=NOR:1M(u-boot),2M(FPGA);NAND:-(root)" + +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE 1 + +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_LOAD_ADDR 0x2000000 +#define CONFIG_LOADADDR 0x4000000 +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 + +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_LOADS_ECHO 1 +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 + +#define CONFIG_SYS_MEMTEST_START (60<<20) +#define CONFIG_SYS_MEMTEST_END (70<<20) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE) +#define CONFIG_SYS_HID2 HID2_HBE + +/* + * MMU Setup + */ +#define CONFIG_HIGH_BATS 1 + +/* DDR: cache cacheable */ +#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE + +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM | BATL_PP_10 |\ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM | BATU_BL_256M | BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U + +/* unused */ +#define CONFIG_SYS_IBAT1L (0) +#define CONFIG_SYS_IBAT1U (0) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U + +/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_10 |\ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U + +/* unused */ +#define CONFIG_SYS_IBAT3L (0) +#define CONFIG_SYS_IBAT3U (0) +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 |\ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_64M |\ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K |\ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +/* PCI MEM space: cacheable */ +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 |\ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M |\ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +/* PCI MMIO space: cache-inhibit and guarded */ +#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M |\ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +/* + * I2C EEPROM settings + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_SIZE 0x4000 + +/* + * Environment Configuration + */ +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0xFFD00000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +/* + * Video + */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_SM501_PCI +#define VIDEO_FB_LITTLE_ENDIAN +#define CONFIG_CMD_BMP +#define CONFIG_VIDEO_SM501 +#define CONFIG_VIDEO_SM501_32BPP +#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) + +/* + * SPI + */ +#define CONFIG_MPC8XXX_SPI + +/* + * USB + */ +#define CONFIG_SYS_USB_HOST +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_HAS_FSL_DR_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#define CONFIG_USB_STORAGE +#define CONFIG_USB_KEYBOARD +/* + * + */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "s" +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_RESET_TO_RETRY 1000 + +#define MV_CI MergerBox +#define MV_VCI MergerBox +#define MV_FPGA_DATA 0xfc100000 +#define MV_FPGA_SIZE 0x00200000 + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + +#define MV_KERNEL_ADDR_RAM 0x02800000 +#define MV_DTB_ADDR_RAM 0x00600000 +#define MV_INITRD_ADDR_RAM 0x01000000 +#define MV_FITADDR 0xfc300000 +#define MV_SPLAH_ADDR 0xffe00000 + +#define CONFIG_BOOTCOMMAND "run i2c_init;if test ${boot_sqfs} -eq 1;"\ + "then; run fitboot;else;run ubiboot;fi;" +#define CONFIG_BOOTARGS "console=ttyS0,115200n8" + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console_nr=0\0"\ + "stdin=serial\0"\ + "stdout=serial\0"\ + "stderr=serial\0"\ + "boot_sqfs=1\0"\ + "usb_dr_mode=host\0"\ + "bootfile=MergerBox.fit\0"\ + "baudrate=" MK_STR(CONFIG_BAUDRATE) "\0"\ + "fpga=0\0"\ + "fpgadata=" MK_STR(MV_FPGA_DATA) "\0"\ + "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"\ + "mv_kernel_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"\ + "mv_initrd_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0"\ + "mv_dtb_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0"\ + "uboota=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"\ + "fitaddr=" MK_STR(MV_FITADDR) "\0"\ + "mv_version=" U_BOOT_VERSION "\0"\ + "mtdids=" MTDIDS_DEFAULT "\0"\ + "mtdparts=" MTDPARTS_DEFAULT "\0"\ + "dhcp_client_id=" MK_STR(MV_CI) "\0"\ + "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0"\ + "upd_uboot=dhcp;tftp bdi2000/u-boot-mergerbox-xp.bin;"\ + "protect off all;erase $uboota +0xC0000;"\ + "cp.b $loadaddr $uboota $filesize\0"\ + "upd_fpga=dhcp;tftp MergerBox.rbf;erase $fpgadata +$fpgadatasize;"\ + "cp.b $loadaddr $fpgadata $filesize\0"\ + "upd_fit=dhcp;tftp MergerBox.fit;erase $fitaddr +0x1000000;"\ + "cp.b $loadaddr $fitaddr $filesize\0"\ + "addsqshrfs=set bootargs $bootargs root=/dev/ram ro "\ + "rootfstype=squashfs\0"\ + "addubirfs=set bootargs $bootargs ubi.mtd=9 root=ubi0:rootfs rw "\ + "rootfstype=ubifs\0"\ + "addusbrfs=set bootargs $bootargs root=/dev/sda1 rw "\ + "rootfstype=ext3 usb-storage.delay_use=1 rootdelay=3\0"\ + "netusbboot=bootp;run fpganetload fitnetload addusbrfs doboot\0"\ + "netubiboot= bootp;run fpganetload fitnetload addubirfs doboot\0"\ + "ubiboot=run fitprep addubirfs;set mv_initrd_ram -;run doboot\0"\ + "doboot=bootm $mv_kernel_ram $mv_initrd_ram $mv_dtb_ram\0"\ + "fitprep=imxtract $fitaddr kernel $mv_kernel_ram;"\ + "imxtract $fitaddr ramdisk $mv_initrd_ram;"\ + "imxtract $fitaddr fdt $mv_dtb_ram\0"\ + "fdtprep=fdt addr $mv_dtb_ram;fdt boardsetup\0"\ + "fitboot=run fitprep fdtprep addsqshrfs doboot\0"\ + "i2c_init=run i2c_speed init_sdi_tx i2c_init_pll\0"\ + "i2c_init_pll=i2c mw 65 9 2;i2c mw 65 9 0;i2c mw 65 5 2b;"\ + "i2c mw 65 7 f;i2c mw 65 8 f;i2c mw 65 11 40;i2c mw 65 12 40;"\ + "i2c mw 65 13 40; i2c mw 65 14 40; i2c mw 65 a 0\0"\ + "i2c_speed=i2c dev 0;i2c speed 300000;i2c dev 1;i2c speed 120000\0"\ + "init_sdi_tx=i2c mw 21 6 0;i2c mw 21 2 0;i2c mw 21 3 0;sleep 1;"\ + "i2c mw 21 2 ff;i2c mw 21 3 3c\0"\ + "splashimage=" MK_STR(MV_SPLAH_ADDR) "\0"\ + "" + +#undef MK_STR +#undef XMK_STR + +/* + * FPGA + */ +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 + +#endif |