diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/M5253EVBE.h | 2 | ||||
| -rw-r--r-- | include/configs/M5282EVB.h | 2 | ||||
| -rw-r--r-- | include/configs/M5329EVB.h | 2 | ||||
| -rw-r--r-- | include/configs/M54455EVB.h | 36 | ||||
| -rw-r--r-- | include/configs/MPC8266ADS.h | 51 | ||||
| -rw-r--r-- | include/configs/MPC8541CDS.h | 1 | ||||
| -rw-r--r-- | include/configs/MPC8548CDS.h | 1 | ||||
| -rw-r--r-- | include/configs/MPC8555CDS.h | 1 | ||||
| -rw-r--r-- | include/configs/MPC8568MDS.h | 2 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 6 | ||||
| -rw-r--r-- | include/configs/TQM860M.h | 13 | ||||
| -rw-r--r-- | include/configs/TQM866M.h | 49 | ||||
| -rw-r--r-- | include/configs/atstk1002.h | 11 | ||||
| -rw-r--r-- | include/configs/delta.h | 2 | ||||
| -rw-r--r-- | include/configs/lubbock.h | 1 | ||||
| -rw-r--r-- | include/configs/motionpro.h | 29 | ||||
| -rw-r--r-- | include/configs/pxa255_idp.h | 13 | ||||
| -rw-r--r-- | include/configs/xsengine.h | 1 |
18 files changed, 117 insertions, 106 deletions
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 48170e7..f5e1b64 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -146,7 +146,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ #ifdef CONFIG_MONITOR_IS_IN_RAM #define CFG_MONITOR_BASE 0x20000 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 3c17c1e..7bb9f60 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -163,7 +163,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #define CFG_INT_FLASH_BASE 0xf0000000 #define CFG_INT_FLASH_ENABLE 0x21 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index d3b1605..47d74a3 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -175,7 +175,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x40000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */ #define CFG_SDRAM_CFG1 0x53722730 #define CFG_SDRAM_CFG2 0x56670000 #define CFG_SDRAM_CTRL 0xE1092000 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 6f4859c..ba050cb 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -27,8 +27,8 @@ * board/config.h - configuration options, board specific */ -#ifndef _JAMICA54455_H -#define _JAMICA54455_H +#ifndef _M54455EVB_H +#define _M54455EVB_H /* * High Level Configuration Options @@ -75,7 +75,7 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_NET -#define CONFIG_CMD_PCI +#undef CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO @@ -129,8 +129,8 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 2ffff;" \ - "era 0 2ffff;" \ + "prog=prot off 4000000 402ffff;" \ + "era 4000000 402ffff;" \ "cp.b ${loadaddr} 0 ${filesize};" \ "save\0" \ "" @@ -174,6 +174,7 @@ #define CFG_IMMR CFG_MBAR /* PCI */ +#ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 #define CFG_PCI_MEM_BUS 0xA0000000 @@ -187,6 +188,7 @@ #define CFG_PCI_CFG_BUS 0xB0000000 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS #define CFG_PCI_CFG_SIZE 0x01000000 +#endif /* FPGA - Spartan 2 */ /* experiment @@ -268,8 +270,6 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OVERWRITE 1 #undef CFG_ENV_IS_EMBEDDED @@ -278,13 +278,17 @@ * FLASH organization */ #ifdef CFG_ATMEL_BOOT -# define CFG_FLASH_BASE 0 +# define CFG_FLASH_BASE CFG_CS0_BASE # define CFG_FLASH0_BASE CFG_CS0_BASE # define CFG_FLASH1_BASE CFG_CS1_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) +# define CFG_ENV_SECT_SIZE 0x2000 #else # define CFG_FLASH_BASE CFG_FLASH0_BASE # define CFG_FLASH0_BASE CFG_CS1_BASE # define CFG_FLASH1_BASE CFG_CS0_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000) +# define CFG_ENV_SECT_SIZE 0x20000 #endif /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system @@ -328,9 +332,9 @@ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #ifdef CFG_ATMEL_BOOT -# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_DEV "nor1" # define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000) #else # define CONFIG_JFFS2_DEV "nor0" # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) @@ -356,20 +360,20 @@ #ifdef CFG_ATMEL_BOOT /* Atmel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x04000000 #define CFG_CS0_MASK 0x00070001 #define CFG_CS0_CTRL 0x00001140 /* Intel Flash */ -#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_BASE 0x00000000 #define CFG_CS1_MASK 0x01FF0001 -#define CFG_CS1_CTRL 0x003F3D60 +#define CFG_CS1_CTRL 0x00000D60 #define CFG_ATMEL_BASE CFG_CS0_BASE #else /* Intel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x00000000 #define CFG_CS0_MASK 0x01FF0001 -#define CFG_CS0_CTRL 0x003F3D60 +#define CFG_CS0_CTRL 0x00000D60 /* Atmel Flash */ #define CFG_CS1_BASE 0x04000000 #define CFG_CS1_MASK 0x00070001 @@ -388,4 +392,4 @@ #define CFG_CS3_MASK 0x00070001 #define CFG_CS3_CTRL 0x00000020 -#endif /* _JAMICA54455_H */ +#endif /* _M54455EVB_H */ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 14b041e..3659002 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -146,37 +146,26 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_XIMG +#include <config_cmd_default.h> + +/* Commands we want, that are not part of default set */ +#define CONFIG_CMD_ASKENV /* ask for env variable */ +#define CONFIG_CMD_CACHE /* icache, dcache */ +#define CONFIG_CMD_DHCP /* DHCP Support */ +#define CONFIG_CMD_DIAG /* Diagnostics */ +#define CONFIG_CMD_IMMAP /* IMMR dump support */ +#define CONFIG_CMD_IRQ /* irqinfo */ +#define CONFIG_CMD_MII /* MII support */ +#define CONFIG_CMD_PCI /* pciinfo */ +#define CONFIG_CMD_PING /* ping support */ +#define CONFIG_CMD_PORTIO /* Port I/O */ +#define CONFIG_CMD_REGINFO /* Register dump */ +#define CONFIG_CMD_SAVES /* save S record dump */ +#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ + +/* Commands from default set we don't need */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ /* Define a command string that is automatically executed when no character * is read on the console interface withing "Boot Delay" after reset. diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 4e061bd..8dda665 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8541@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 6083715..4edc7fd 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -340,6 +340,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8548@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 1d1b7c9..c414bf0 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8555@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index ba744e9..548e158 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -297,7 +297,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8568@e0000000" #define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" +#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500" /* * I2C diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index d553404..7ecc275 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -257,8 +257,8 @@ "fdt_addr=FC0A0000\0" \ "kernel_addr=FC0C0000\0" \ "ramdisk_addr=FC300000\0" \ - "kernel_addr_r=200000\0" \ - "fdt_addr_r=400000\0" \ + "kernel_addr_r=400000\0" \ + "fdt_addr_r=600000\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -547,7 +547,7 @@ # if defined (CONFIG_TQM5200_REV100) # error TQM5200 REV100 not supported on STK52XX REV200 or above # else/* TQM5200 REV200 and above */ -# define CFG_GPS_PORT_CONFIG 0x91500004 +# define CFG_GPS_PORT_CONFIG 0x91500404 # endif # endif #elif defined (CONFIG_FO300) diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 684b86f..fe3a2f0 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -69,9 +69,14 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860M/uImage\0" \ - "fdt_addr=40080000\0" \ - "kernel_addr=400A0000\0" \ + "fdt_addr=400C0000\0" \ + "kernel_addr=40100000\0" \ "ramdisk_addr=40280000\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "update=protect off 40000000 +${filesize};" \ + "erase 40000000 +${filesize};" \ + "cp.b 200000 40000000 ${filesize};" \ + "protect on 40000000 +${filesize}\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -172,7 +177,7 @@ #define CFG_FLASH_BASE 0x40000000 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ /* * For booting Linux, the board info and command line data @@ -193,7 +198,7 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 0d77891..ca3c166 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -81,9 +81,14 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM866M/uImage\0" \ - "fdt_addr=40080000\0" \ - "kernel_addr=400A0000\0" \ + "fdt_addr=400C0000\0" \ + "kernel_addr=40100000\0" \ "ramdisk_addr=40280000\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "update=protect off 40000000 +${filesize};" \ + "erase 40000000 +${filesize};" \ + "cp.b 200000 40000000 ${filesize};" \ + "protect on 40000000 +${filesize}\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -215,7 +220,7 @@ #define CFG_FLASH_BASE 0x40000000 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ /* * For booting Linux, the board info and command line data @@ -236,7 +241,7 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) @@ -421,26 +426,30 @@ #define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) /* - * Memory Periodic Timer Prescaler - * Periodic timer for refresh, start with refresh rate for 40 MHz clock - * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK) + * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad) + * + * CPUclock(MHz) * 31.2 + * CFG_MAMR_PTA = ----------------------------------- with DFBRG = 0 + * 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16 + * + * CPU clock = 15 MHz: CFG_MAMR_PTA = 29 -> 4 * 7.73 us + * CPU clock = 50 MHz: CFG_MAMR_PTA = 97 -> 4 * 7.76 us + * CPU clock = 66 MHz: CFG_MAMR_PTA = 128 -> 4 * 7.75 us + * CPU clock = 133 MHz: CFG_MAMR_PTA = 255 -> 4 * 7.67 us + * + * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will + * be met also in the default configuration, i.e. if environment variable + * 'cpuclk' is not set. */ -#define CFG_MAMR_PTA 39 +#define CFG_MAMR_PTA 97 /* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + * Memory Periodic Timer Prescaler Register (MPTPR) values. */ -#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ +/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 +/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* * MAMR settings for SDRAM diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 1809fc5..b33e26f 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -114,15 +114,10 @@ #define CONFIG_AUTOBOOT_STOP_STR " " /* - * These are "locally administered ethernet addresses" generated by - * ./tools/gen_eth_addr - * - * After booting the board for the first time, new addresses should be - * generated and assigned to the environment variables "ethaddr" and - * "eth1addr". + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_ETHADDR 6a:87:71:14:cd:cb -#define CONFIG_ETH1ADDR ca:f8:15:e6:3e:e6 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_NET_MULTI 1 diff --git a/include/configs/delta.h b/include/configs/delta.h index 09667ed..14fde1a 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -123,6 +123,8 @@ #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 +#include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */ + #undef CFG_USB_OHCI_BOARD_INIT #define CFG_USB_OHCI_CPU_INIT 1 #define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 4adf254..82fe19c 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -42,6 +42,7 @@ #endif #define CONFIG_MMC 1 #define BOARD_LATE_INIT 1 +#define CONFIG_DOS_PARTITION #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 9a21632..1503598 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -163,9 +163,9 @@ /* - * Clock configuration: SYS_XTALIN = 25MHz + * Clock configuration: SYS_XTALIN = 33MHz */ -#define CFG_MPC5XXX_CLKIN 25000000 +#define CFG_MPC5XXX_CLKIN 33000000 /* @@ -211,7 +211,7 @@ #endif #define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */ +#define CFG_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ @@ -221,7 +221,7 @@ /* Boot Chipselect */ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#define CFG_BOOTCS_CFG 0x03035D00 +#define CFG_BOOTCS_CFG 0x00045D00 /* Flash memory addressing */ #define CFG_CS0_START CFG_FLASH_BASE @@ -251,11 +251,11 @@ /* * SDRAM configuration */ -/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 2, 32 bit data bus */ -#define SDRAM_CONFIG1 0x52222600 -#define SDRAM_CONFIG2 0x88b70000 -#define SDRAM_CONTROL 0x50570000 -#define SDRAM_MODE 0x008d0000 +/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */ +#define SDRAM_CONFIG1 0x62322900 +#define SDRAM_CONFIG2 0x88c70000 +#define SDRAM_CONTROL 0x504f0000 +#define SDRAM_MODE 0x00cd0000 /* @@ -267,7 +267,7 @@ #define CFG_FLASH_SIZE 0x01000000 #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } -#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ #define CONFIG_FLASH_16BIT /* Flash is 16-bit */ /* @@ -277,8 +277,8 @@ #define MTDIDS_DEFAULT "nor0=motionpro-0" #define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ "13m(fs),2m(kernel),256k(uboot)," \ - "64k(env),64k(redund_env),64k(dtb)," \ - "-(user_data)" + "128k(env),128k(redund_env)," \ + "128k(dtb),-(user_data)" /* * IDE/ATA configuration @@ -356,7 +356,7 @@ extern void __led_set(led_id_t id, int state); /* This has to be a multiple of the Flash sector size */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SIZE 0x1000 -#define CFG_ENV_SECT_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 /* Configuration of redundant environment */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) @@ -394,7 +394,8 @@ extern void __led_set(led_id_t id, int state); #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x03f00000 /* 1 ... 64 MiB in DRAM */ +#define CFG_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */ +#define CFG_ALT_MEMTEST #define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */ diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 0e884fc..4a9cadb 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -38,10 +38,11 @@ #include <asm/arch/pxa-regs.h> /* - * If we are developing, we might want to start armboot from ram + * If we are developing, we might want to start U-Boot from RAM * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ +#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ /* * define the following to enable debug blinks. A debug blink function @@ -62,6 +63,7 @@ #endif #define CONFIG_MMC 1 +#define CONFIG_DOS_PARTITION 1 #define BOARD_LATE_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -121,7 +123,6 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_DHCP - #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 40000" #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" @@ -332,7 +333,7 @@ #define CFG_FLASH_CFI_DRIVER 1 #define CFG_MONITOR_BASE 0 -#define CFG_MONITOR_LEN 0x40000 +#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ @@ -347,7 +348,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* Addr of Environment Sector */ #define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000) -#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x40000 +#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16) #endif /* __CONFIG_H */ diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 5733933..766617e 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -32,6 +32,7 @@ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ #define CONFIG_XSENGINE 1 #define CONFIG_MMC 1 +#define CONFIG_DOS_PARTITION 1 #define BOARD_POST_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ |