diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/lwmon5.h | 68 |
1 files changed, 65 insertions, 3 deletions
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 2ebcd16..ba613e3 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2010 + * (C) Copyright 2007-2013 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -37,8 +37,12 @@ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ -#ifndef CONFIG_SYS_TEXT_BASE +#ifdef CONFIG_LCD4_LWMON5 +#define CONFIG_SYS_TEXT_BASE 0x01000000 /* SPL U-Boot TEXT_BASE */ +#define CONFIG_HOSTNAME lcd4_lwmon5 +#else #define CONFIG_SYS_TEXT_BASE 0xFFF80000 +#define CONFIG_HOSTNAME lwmon5 #endif #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ @@ -56,7 +60,7 @@ * actual resources get mapped (not physical addresses) */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */ -#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1) +#define CONFIG_SYS_MONITOR_LEN 0x80000 #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */ #define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 @@ -75,9 +79,11 @@ #define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE1 + 0x10000000) #define CONFIG_SYS_PCI_MEMBASE3 (CONFIG_SYS_PCI_MEMBASE2 + 0x10000000) +#ifndef CONFIG_LCD4_LWMON5 #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 +#endif /* * Initial RAM & stack pointer @@ -87,12 +93,20 @@ * content during reset (GPT0_COMP6). This way we reserve the OCM (16k) * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.) */ +#ifndef CONFIG_LCD4_LWMON5 #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#else +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) +#endif /* unused GPT0 COMP reg */ #define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) #define CONFIG_SYS_OCM_SIZE (16 << 10) @@ -166,8 +180,11 @@ #define CONFIG_SYS_MBYTES_SDRAM 256 #define CONFIG_SYS_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#ifndef CONFIG_LCD4_LWMON5 #define CONFIG_DDR_ECC /* enable ECC */ +#endif +#ifndef CONFIG_LCD4_LWMON5 /* POST support */ #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ CONFIG_SYS_POST_CPU | \ @@ -276,6 +293,7 @@ #define CONFIG_ALT_LH_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1) #define CONFIG_ALT_LB_ADDR (CONFIG_SYS_OCM_BASE) #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ +#endif /* * I2C @@ -395,6 +413,7 @@ #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN +#ifndef CONFIG_LCD4_LWMON5 /* * USB/EHCI */ @@ -410,6 +429,7 @@ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION +#endif /* * BOOTP options @@ -444,9 +464,11 @@ #define CONFIG_CMD_BMP #endif +#ifndef CONFIG_LCD4_LWMON5 #ifdef CONFIG_440EPX #define CONFIG_CMD_USB #endif +#endif /* * Miscellaneous configurable options @@ -480,11 +502,15 @@ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ + +#ifndef CONFIG_LCD4_LWMON5 #ifndef DEBUG #define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ #endif #define CONFIG_WD_PERIOD 40000 /* in usec */ #define CONFIG_WD_MAX_RATE 66600 /* in ticks */ +#endif /* * For booting Linux, the board info and command line data @@ -644,4 +670,40 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* + * SPL related defines + */ +#ifdef CONFIG_LCD4_LWMON5 +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NOR_SUPPORT +#define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */ +#define CONFIG_SYS_SPL_MAX_LEN (64 << 10) +#define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */ +#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/ppc4xx" +#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/ppc4xx/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ +#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ +#define CONFIG_SPL_SERIAL_SUPPORT + +/* Place BSS for SPL near end of SDRAM */ +#define CONFIG_SPL_BSS_START_ADDR ((256 - 1) << 20) +#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) + +#define CONFIG_SPL_OS_BOOT +/* Place patched DT blob (fdt) at this address */ +#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 + +#define CONFIG_SPL_TARGET "u-boot-img-spl-at-end.bin" + +/* Settings for real U-Boot to be loaded from NOR flash */ +#define CONFIG_SYS_UBOOT_BASE (-CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_UBOOT_START 0x01002100 + +#define CONFIG_SYS_OS_BASE 0xf8000000 +#define CONFIG_SYS_FDT_BASE 0xf87c0000 +#endif + #endif /* __CONFIG_H */ |