diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/PMC440.h | 3 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 1 | ||||
| -rw-r--r-- | include/configs/inka4x0.h | 33 | ||||
| -rw-r--r-- | include/configs/lwmon5.h | 19 |
4 files changed, 36 insertions, 20 deletions
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 3d2ed1e..87fca3c 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -167,6 +167,7 @@ * set up. While still running from cache, I experienced problems accessing * the NAND controller. sr - 2006-08-25 */ +#if defined (CONFIG_NAND_U_BOOT) #define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ #define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ #define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */ @@ -195,6 +196,7 @@ #define CFG_NAND_OOBSIZE 16 #define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) #define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} +#endif #ifdef CFG_ENV_IS_IN_NAND /* @@ -501,6 +503,7 @@ #define NAND_MAX_CHIPS 1 #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#define CFG_NAND_QUIET_TEST 1 /* * Internal Definitions diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 7ecc275..9a0e9b8 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -131,6 +131,7 @@ /* USB */ #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI_NEW +#define CFG_OHCI_BE_CONTROLLER #define CONFIG_USB_STORAGE #define CONFIG_CMD_FAT #define CONFIG_CMD_USB diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 0fac28f..206007d 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -142,7 +142,7 @@ "cp.l 100000 f0000b28 1\0" \ "ideargs=setenv bootargs root=/dev/hda1 rw\0" \ "ide_boot=ext2load ide 0:1 200000 uImage;" \ - "run ideargs addip addcons enable_disp;bootm" \ + "run ideargs addip addcons enable_disp;bootm\0" \ "brightness=255\0" \ "" @@ -156,24 +156,24 @@ /* * Flash configuration */ -#define CFG_FLASH_BASE 0xFFE00000 - -#define CFG_FLASH_SIZE 0x00200000 /* 2 MByte */ -#define CFG_MAX_FLASH_SECT 35 /* max num of sects on one chip */ - -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) /* second sector */ -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xffe00000 +#define CFG_FLASH_SIZE 0x00200000 +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_OVERWRITE 1 +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /* * Memory map @@ -182,7 +182,14 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_DEFAULT_MBAR 0x80000000 -#define CONFIG_MPC5200_DDR +/* + * SDRAM controller configuration + */ +#undef CONFIG_SDR_MT48LC16M16A2 +#undef CONFIG_DDR_MT46V16M16 +#undef CONFIG_DDR_MT46V32M16 +#undef CONFIG_DDR_HYB25D512160BF +#define CONFIG_DDR_K4H511638C /* Use ON-Chip SRAM until RAM will be available */ #define CFG_INIT_RAM_ADDR MPC5XXX_SRAM @@ -203,7 +210,7 @@ # define CFG_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 5210024..0bf536b 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -71,15 +71,20 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer *----------------------------------------------------------------------*/ -/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ -#define CFG_OCM_DATA_ADDR CFG_OCM_BASE - +/* + * On LWMON5 we use D-cache as init-ram and stack pointer. We also move + * the POST_WORD from OCM to a 440EPx register that preserves it's + * content during reset (GPT0_COM6). This way we reserve the OCM (16k) + * for logbuffer only. + */ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) -#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) + /* unused GPT0 COMP reg */ /*----------------------------------------------------------------------- * Serial Port |