summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/ELPPC.h337
-rw-r--r--include/configs/P3G4.h407
-rw-r--r--include/configs/ZUMA.h370
-rw-r--r--include/configs/mpc7448hpc2.h386
-rw-r--r--include/configs/ppmc7xx.h416
5 files changed, 0 insertions, 1916 deletions
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
deleted file mode 100644
index debfc36..0000000
--- a/include/configs/ELPPC.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define GTREGREAD(x) 0xffffffff /* needed for debug */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-/* these hardware addresses are pretty bogus, please change them to
- suit your needs */
-
-/* first ethernet */
-#define CONFIG_ETHADDR 00:00:5b:ee:de:ad
-
-#define CONFIG_IPADDR 192.168.0.105
-#define CONFIG_SERVERIP 192.168.0.100
-
-#define CONFIG_ELPPC 1 /* this is an BAB740/BAB750 board */
-
-#define CONFIG_BAUDRATE 9600 /* console baudrate */
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp 1000000; " \
- "setenv bootargs root=ramfs console=ttyS00,9600 " \
- "ip=${ipaddr}:${serverip}:${rootpath}:${gatewayip}:" \
- "${netmask}:${hostname}:eth0:none; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_JFFS2
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-/*
- * choose between COM1 and COM2 as serial console
- */
-#define CONFIG_CONS_INDEX 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-#define CONFIG_SYS_BOARD_ASM_INIT
-#define CONFIG_MISC_INIT_R
-
-/*
- * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP)
- */
-#undef CONFIG_SYS_ADDRESS_MAP_A
-
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
-
-#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
-#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000
-
-#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
-#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000
-#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
-
-#define CONFIG_SYS_PCI_IO_BUS 0x00800000
-#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000
-#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
-
-#define CONFIG_SYS_ISA_IO_BUS 0x00000000
-#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000
-#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
-
-/* driver defines FDC,IDE,... */
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_USR_LED_BASE 0x78000000
-#define CONFIG_SYS_NVRAM_BASE 0xff000000
-#define CONFIG_SYS_UART_BASE 0xff400000
-#define CONFIG_SYS_FLASH_BASE 0xfff00000
-
-#define MPC107_EUMB_ADDR 0xfce00000
-#define MPC107_EUMB_PI 0xfce41090
-#define MPC107_EUMB_GCR 0xfce41020
-#define MPC107_EUMB_IACKR 0xfce600a0
-#define MPC107_I2C_ADDR 0xfce03000
-
-/*
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Flash mapping/organization on the MPC10x.
- */
-#define FLASH_BASE0_PRELIM 0xff800000
-#define FLASH_BASE1_PRELIM 0xffc00000
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=elppc-0,nor1=elppc-1"
-#define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)"
-*/
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
-#undef CONFIG_SYS_MEMTEST
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#define CONFIG_SYS_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */
-#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
-#define CONFIG_ENV_ADDR 0x0
-#define CONFIG_ENV_MAP_ADRS 0xff000000
-#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */
-#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
-
-/*
- * Serial devices
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 24000000
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_UART_BASE + 8)
-
-/*
- * PCI stuff
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP /* pci plug-and-play */
-#define CONFIG_PCI_HOST PCI_HOST_AUTO
-#undef CONFIG_PCI_SCAN_SHOW
-
-/*
- * Optional Video console (graphic: SMI LynxEM)
- */
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10))
-#define VIDEO_TSTC_FCT serial_stub_tstc
-#define VIDEO_GETC_FCT serial_stub_getc
-
-#define CONFIG_VIDEO_SMI_LYNXEM
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-
-/*
- * Initial BATs
- */
-#if 1
-
-#define CONFIG_SYS_IBAT0L 0
-#define CONFIG_SYS_IBAT0U 0
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
-
-#define CONFIG_SYS_IBAT1L 0
-#define CONFIG_SYS_IBAT1U 0
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-#define CONFIG_SYS_IBAT2L 0
-#define CONFIG_SYS_IBAT2U 0
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-
-#define CONFIG_SYS_IBAT3L 0
-#define CONFIG_SYS_IBAT3U 0
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-#else
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
-
-/* address range for flashes */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* ISA IO space */
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-
-/* ISA memory space */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-#endif
-
-/*
- * Speed settings are board specific
- */
-#define CONFIG_SYS_BUS_CLK 100000000
-#define CONFIG_SYS_CPU_CLK 400000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * L2CR setup -- make sure this is right for your board!
- * look in include/74xx_7xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-#if 1
-#define L2_INIT 0 /* cpu 750 CXe*/
-#else
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#endif
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
deleted file mode 100644
index ac75d3e..0000000
--- a/include/configs/P3G4.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-#include "../board/evb64260/local.h"
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_P3G4 1 /* this is a P3G4 board */
-#define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115200 */
-
-#undef CONFIG_ECC /* enable ECC support */
-/* #define CONFIG_EVB64260_750CX 1 */ /* Support the EVB-64260-750CX Board */
-
-/* which initialization functions to call for this board */
-#define CONFIG_MISC_INIT_R 1
-#define CONFIG_BOARD_EARLY_INIT_F 1
-
-#define CONFIG_SYS_BOARD_NAME "P3G4"
-
-#undef CONFIG_SYS_HUSH_PARSER
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * to use the MPSC, #define CONFIG_MPSC. If you have wired up another
- * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
- */
-#define CONFIG_MPSC
-#define CONFIG_MPSC_PORT 0
-
-
-/* define this if you want to enable GT MAC filtering */
-#define CONFIG_GT_USE_MAC_HASH_TABLE
-
-#undef CONFIG_ETHER_PORT_MII /* use RMII */
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "hostname=p3g4\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
- "rootpath=/opt/eldk/ppc_74xx\0" \
- "bootfile=/tftpboot/p3g4/uImage\0" \
- "kernel_addr=ff000000\0" \
- "ramdisk_addr=ff010000\0" \
- "load=tftp 100000 /tftpboot/p3g4/u-boot.bin\0" \
- "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
- "cp.b 100000 fff00000 ${filesize};" \
- "setenv filesize;saveenv\0" \
- "upd=run load update\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_ALTIVEC /* undef to disable */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_UNIVERSE
-#define CONFIG_CMD_BSP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
-#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xff000000
-#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
-
-/* areas to map different things with the GT in physical space */
-#define CONFIG_SYS_DRAM_BANKS 1
-#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
-
-/* What to put in the bats. */
-#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
-
-/* Peripheral Device section */
-#define CONFIG_SYS_GT_REGS 0xf8000000
-#define CONFIG_SYS_DEV_BASE 0xff000000
-
-#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE
-#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
-#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
-#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
-
-#define CONFIG_SYS_DEV0_SIZE _8M /* Flash bank */
-#define CONFIG_SYS_DEV1_SIZE 0 /* unused */
-#define CONFIG_SYS_DEV2_SIZE 0 /* unused */
-#define CONFIG_SYS_DEV3_SIZE 0 /* unused */
-
-#define CONFIG_SYS_16BIT_BOOT_PAR 0xc01b5e7c
-#define CONFIG_SYS_DEV0_PAR CONFIG_SYS_16BIT_BOOT_PAR
-
-#if 0 /* Wrong?? NTL */
-#define CONFIG_SYS_MPP_CONTROL_0 0x53541717 /* InitAct EOT[4] DBurst TCEn[1] */
- /* DMAAck[1:0] GNT0[1:0] */
-#else
-#define CONFIG_SYS_MPP_CONTROL_0 0x53547777 /* InitAct EOT[4] DBurst TCEn[1] */
- /* REQ0[1:0] GNT0[1:0] */
-#endif
-#define CONFIG_SYS_MPP_CONTROL_1 0x44009911 /* TCEn[4] TCTcnt[4] GPP[13:12] */
- /* DMAReq[4] DMAAck[4] WDNMI WDE */
-#if 0 /* Wrong?? NTL */
-#define CONFIG_SYS_MPP_CONTROL_2 0x40091818 /* TCTcnt[0] GPP[22:21] BClkIn */
- /* DMAAck[1:0] GNT1[1:0] */
-#else
-#define CONFIG_SYS_MPP_CONTROL_2 0x40098888 /* TCTcnt[0] */
- /* GPP[22] (RS232IntB or PCI1Int) */
- /* GPP[21] (RS323IntA) */
- /* BClkIn */
- /* REQ1[1:0] GNT1[1:0] */
-#endif
-
-#if 0 /* Wrong?? NTL */
-# define CONFIG_SYS_MPP_CONTROL_3 0x00090066 /* GPP[31:29] BClkOut0 */
- /* GPP[27:26] Int[1:0] */
-#else
-# define CONFIG_SYS_MPP_CONTROL_3 0x22090066 /* MREQ MGNT */
- /* GPP[29] (PCI1Int) */
- /* BClkOut0 */
- /* GPP[27] (PCI0Int) */
- /* GPP[26] (RtcInt or PCI1Int) */
- /* CPUInt[25:24] */
-#endif
-
-#define CONFIG_SYS_SERIAL_PORT_MUX 0x00001102 /* 11=MPSC1/MPSC0 02=ETH 0 and 2 RMII */
-
-#if 0 /* Wrong?? - NTL */
-# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x000002c6
-#else
-# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 0010 1100 0110 0000 */
- /* gpp[29] */
- /* gpp[27:26] */
- /* gpp[22:21] */
-
-# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200 /* 0x448 */
- /* idmas use buffer 1,1
- comm use buffer 0
- pci use buffer 1,1
- cpu use buffer 0
- normal load (see also ifdef HVL)
- standard SDRAM (see also ifdef REG)
- non staggered refresh */
- /* 31:26 25 23 20 19 18 16 */
- /* 110110 00 111 0 0 00 1 */
- /* refresh_count=0x200
- phisical interleaving disable
- virtual interleaving enable */
- /* 15 14 13:0 */
- /* 1 0 0x200 */
-#endif
-
-#if 0
-#define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE
-#define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */
-#endif
-#undef CONFIG_SYS_INIT_CHAN1
-#undef CONFIG_SYS_INIT_CHAN2
-#if 0
-#define SRAM_BASE CONFIG_SYS_DEV0_SPACE
-#define SRAM_SIZE 0x00100000 /* 1 MB of sram */
-#endif
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE _128M
-#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
-
-#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE _128M
-#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE _16M
-#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
-
-#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE _16M
-#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 in one BAT */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/* I2C speed and slave address (for compatability) defaults */
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/* I2C addresses for the two DIMM SPD chips */
-#ifndef CONFIG_EVB64260_750CX
-#define DIMM0_I2C_ADDR 0x56
-#define DIMM1_I2C_ADDR 0x54
-#else /* CONFIG_EVB64260_750CX - only has 1 DIMM */
-#define DIMM0_I2C_ADDR 0x54
-#define DIMM1_I2C_ADDR 0x54
-#endif
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_EXTRA_FLASH_DEVICE BOOT_DEVICE
-#define CONFIG_SYS_EXTRA_FLASH_WIDTH 2 /* 16 bit */
-#define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_CFI 1
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR 0xFFFE0000
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/74xx_7xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-#define CONFIG_SYS_BOARD_ASM_INIT 1
-
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
deleted file mode 100644
index cac6a67..0000000
--- a/include/configs/ZUMA.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */
-#define CONFIG_ETHER_PORT_MII /* use two MII ports */
-#define CONFIG_INTEL_LXT97X /* Intel LXT97X phy */
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-#include "../board/evb64260/local.h"
-
-#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
-#define CONFIG_ZUMA_V2 1 /* always define this for ZUMA v2 */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-/* #define CONFIG_ZUMA_V2_OLD 1 */ /* backwards compat for old V2 board */
-
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
-
-#define CONFIG_ECC /* enable ECC support */
-
-#define CONFIG_750CX /* we have a 750CX/CXe (override local.h) */
-
-/* which initialization functions to call for this board */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_BOARD_ASM_INIT
-
-#define CONFIG_SYS_BOARD_NAME "Zuma APv2"
-
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * what to do:
- * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
- * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
- * to 0 below.
- *
- * to use the MPSC, #define CONFIG_MPSC. If you have wired up another
- * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
- */
-#define CONFIG_MPSC
-
-#define CONFIG_MPSC_PORT 0
-
-
-/* define this if you want to enable GT MAC filtering */
-#define CONFIG_GT_USE_MAC_HASH_TABLE
-
-#if 1
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_BOOTCOMMAND \
- "tftpboot && " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:" \
- "$netmask:$hostname:eth0:none panic=5 && bootm"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_ALTIVEC /* undef to disable */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MII /* enable MII commands */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
-
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
-#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
-*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
-
-#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xfff00000
-#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
-
-/* areas to map different things with the GT in physical space */
-#define CONFIG_SYS_DRAM_BANKS 4
-#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
-
-/* What to put in the bats. */
-#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
-
-/* Peripheral Device section */
-#define CONFIG_SYS_GT_REGS 0xf8000000 /* later mapped GT_REGS */
-#define CONFIG_SYS_DEV_BASE 0xf0000000
-#define CONFIG_SYS_DEV0_SIZE _64M /* zuma flash @ 0xf000.0000*/
-#define CONFIG_SYS_DEV1_SIZE _8M /* zuma IDE @ 0xf400.0000 */
-#define CONFIG_SYS_DEV2_SIZE _8M /* unused */
-#define CONFIG_SYS_DEV3_SIZE _8M /* unused */
-
-#define CONFIG_SYS_DEV0_PAR 0xc498243c
- /* c 4 9 8 2 4 3 c */
- /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
- /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
- /* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */
- /* 3| 0|.... ..| 1| 4 | 0 | 4 | 8 | 7 | 4 */
-
-#define CONFIG_SYS_DEV1_PAR 0xc01b6ac5
- /* c 0 1 b 6 a c 5 */
- /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
- /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
- /* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */
- /* 3| 0|.... ..| 1| 5 | 5 | 5 | 5 | 8 | 5 */
-
-
-#define CONFIG_SYS_8BIT_BOOT_PAR 0xc00b5e7c
-
-#define CONFIG_SYS_MPP_CONTROL_0 0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
-#define CONFIG_SYS_MPP_CONTROL_1 0x00000000 /* GPP[15:12] : GPP[11:8] */
-#define CONFIG_SYS_MPP_CONTROL_2 0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
-#define CONFIG_SYS_MPP_CONTROL_3 0x00000000 /* GPP[31:28] (int[3:0]) */
- /* GPP[27:24] (27 is int4, rest are GPP) */
-
-#define CONFIG_SYS_SERIAL_PORT_MUX 0x00001101 /* 11=MPSC1/MPSC0 01=ETH, 0=only MII */
-#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xf8000000 /* interrupt inputs: GPP[31:27] */
-
-#define CONFIG_SYS_SDRAM_CONFIG 0xe4e18200 /* 0x448 */
- /* idmas use buffer 1,1
- comm use buffer 1
- pci use buffer 0,0 (pci1->0 pci0->0)
- cpu use buffer 1 (R*18)
- normal load (see also ifdef HVL)
- standard SDRAM (see also ifdef REG)
- non staggered refresh */
- /* 31:26 25 23 20 19 18 16 */
- /* 111001 00 111 0 0 00 1 */
-
- /* refresh count=0x200
- phy interleave disable (by default,
- set later by dram config..)
- virt interleave enable */
- /* 15 14 13:0 */
- /* 1 0 0x200 */
-
-#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE
-#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
-#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
-#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE _128M
-#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE _128M
-
-#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
-#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE _16M
-#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE _16M
-
-#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
-#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
-
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
-
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 130 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */
-#define CONFIG_SYS_EXTRA_FLASH_WIDTH 2 /* 16 bit */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_CFI 1
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */
-#define CONFIG_ENV_ADDR (0xfff80000 - CONFIG_ENV_SECT_SIZE)
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/74xx_7xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-#ifdef CONFIG_750CX
-#define L2_INIT 0
-#else
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#endif
-
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-/*------------------------------------------------------------------------
- * Real time clock
- */
-#define CONFIG_RTC_DS1302
-
-
-/*------------------------------------------------------------------------
- * Galileo I2C driver
- */
-#define CONFIG_GT_I2C
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
deleted file mode 100644
index 0308c52..0000000
--- a/include/configs/mpc7448hpc2.h
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- * Copyright (c) 2005 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2006
- * Alex Bounine , Tundra Semiconductor Corp.
- * Roy Zang , <tie-fei.zang@freescale.com> Freescale Corp.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board specific configuration options for Freescale
- * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Board Configuration Definitions */
-/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
-
-#define CONFIG_MPC7448HPC2
-
-#define CONFIG_74xx
-#define CONFIG_HIGH_BATS /* High BATs supported */
-#define CONFIG_ALTIVEC /* undef to disable */
-
-#define CONFIG_SYS_TEXT_BASE 0xFF000000
-
-#define CONFIG_SYS_BOARD_NAME "MPC7448 HPC II"
-#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
-
-#define CONFIG_SYS_OCN_CLK 133000000 /* 133 MHz */
-#define CONFIG_SYS_BUS_CLK 133000000
-
-#define CONFIG_SYS_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
-
-#undef CONFIG_ECC /* disable ECC support */
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-/* Board-specific Initialization Functions to be called */
-#define CONFIG_SYS_BOARD_ASM_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
-
-/*#define CONFIG_SYS_HUSH_PARSER */
-#undef CONFIG_SYS_HUSH_PARSER
-
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_TSI "tsi108@c0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/tsi108@c0000000/serial@7808"
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * what to do:
- * If you have hacked a serial cable onto the second DUART channel,
- * change the CONFIG_SYS_DUART port from 1 to 0 below.
- *
- */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_OCN_CLK * 8
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
-
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#undef CONFIG_BOOTARGS
-/* #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */
-
-#if (CONFIG_BOOTDELAY >= 0)
-#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\
- setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
- ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; "
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200"
-#endif
-
-#undef CONFIG_EXTRA_ENV_SETTINGS
-
-#define CONFIG_SERIAL "No. 1"
-
-/* Networking Configuration */
-
-#define CONFIG_TSI108_ETH
-#define CONFIG_TSI108_ETH_NUM_PORTS 2
-
-
-#define CONFIG_BOOTFILE "zImage.initrd.elf"
-#define CONFIG_LOADADDR 0x400000
-
-/*-------------------------------------------------------------------------- */
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DATE
-
-
-/*set date in u-boot*/
-#define CONFIG_RTC_M48T35A
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfc000000
-#define CONFIG_SYS_NVRAM_SIZE 0x8000
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_VERSION_VARIABLE 1
-#define CONFIG_TSI108_I2C
-#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-/*
- * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
- * To an unused memory region. The stack will remain in cache until RAM
- * is initialized
- */
-#undef CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000/* larger space - we have SDRAM initialized */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
-#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
-
-#define CONFIG_SYS_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
-#define CONFIG_SYS_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
-
-#define CONFIG_SYS_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
-
-#define CONFIG_SYS_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
-
-#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
-
-#define CONFIG_SYS_FLASH_BASE 0xff000000 /* Base Address of Flash device */
-#define CONFIG_SYS_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
-
-#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */
-
-#define PCI0_IO_BASE_BOOTM 0xfd000000
-
-#define CONFIG_SYS_RESET_ADDRESS 0x3fffff00
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* u-boot code base */
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
-
-/* Peripheral Device section */
-
-/*
- * Resources on the Tsi108
- */
-
-#define CONFIG_SYS_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
-#define CONFIG_SYS_TSI108_CSR_BASE CONFIG_SYS_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
-
-#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */
-
-#undef DISABLE_PBM
-
-/*
- * PCI stuff
- *
- */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_TSI108_PCI /* include tsi108 pci support */
-
-#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-/* PCI MEMORY MAP section */
-
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
-/* PCI Memory Space */
-#define CONFIG_SYS_PCI_MEM_BUS (CONFIG_SYS_PCI_MEM_PHYS)
-#define CONFIG_SYS_PCI_MEM_PHYS (CONFIG_SYS_PCI_MEM32_BASE) /* 0xE0000000 */
-#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
-
-/* PCI I/O Space */
-#define CONFIG_SYS_PCI_IO_BUS 0x00000000
-#define CONFIG_SYS_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
-
-#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16MB */
-
-/* PCI Config Space mapping */
-#define CONFIG_SYS_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
-#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 /* 16MB */
-
-#define CONFIG_SYS_IBAT0U 0xFE0003FF
-#define CONFIG_SYS_IBAT0L 0xFE000002
-
-#define CONFIG_SYS_IBAT1U 0x00007FFF
-#define CONFIG_SYS_IBAT1L 0x00000012
-
-#define CONFIG_SYS_IBAT2U 0x80007FFF
-#define CONFIG_SYS_IBAT2L 0x80000022
-
-#define CONFIG_SYS_IBAT3U 0x00000000
-#define CONFIG_SYS_IBAT3L 0x00000000
-
-#define CONFIG_SYS_IBAT4U 0x00000000
-#define CONFIG_SYS_IBAT4L 0x00000000
-
-#define CONFIG_SYS_IBAT5U 0x00000000
-#define CONFIG_SYS_IBAT5L 0x00000000
-
-#define CONFIG_SYS_IBAT6U 0x00000000
-#define CONFIG_SYS_IBAT6L 0x00000000
-
-#define CONFIG_SYS_IBAT7U 0x00000000
-#define CONFIG_SYS_IBAT7L 0x00000000
-
-#define CONFIG_SYS_DBAT0U 0xE0003FFF
-#define CONFIG_SYS_DBAT0L 0xE000002A
-
-#define CONFIG_SYS_DBAT1U 0x00007FFF
-#define CONFIG_SYS_DBAT1L 0x00000012
-
-#define CONFIG_SYS_DBAT2U 0x00000000
-#define CONFIG_SYS_DBAT2L 0x00000000
-
-#define CONFIG_SYS_DBAT3U 0xC0000003
-#define CONFIG_SYS_DBAT3L 0xC000002A
-
-#define CONFIG_SYS_DBAT4U 0x00000000
-#define CONFIG_SYS_DBAT4L 0x00000000
-
-#define CONFIG_SYS_DBAT5U 0x00000000
-#define CONFIG_SYS_DBAT5L 0x00000000
-
-#define CONFIG_SYS_DBAT6U 0x00000000
-#define CONFIG_SYS_DBAT6L 0x00000000
-
-#define CONFIG_SYS_DBAT7U 0x00000000
-#define CONFIG_SYS_DBAT7L 0x00000000
-
-/* I2C addresses for the two DIMM SPD chips */
-#define DIMM0_I2C_ADDR 0x51
-#define DIMM1_I2C_ADDR 0x52
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, /* CONFIG_SYS_FLASH_BASE2 */ }
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_WRITE_SWAPPED_DATA
-
-#define PHYS_FLASH_SIZE 0x01000000
-#define CONFIG_SYS_MAX_FLASH_SECT (128)
-
-#define CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_ADDR 0xFC000000
-
-#define CONFIG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
- */
-#undef CONFIG_SYS_L2
-
-#define L2_INIT 0
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-#define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
-#endif /* __CONFIG_H */
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
deleted file mode 100644
index 18f9a6c..0000000
--- a/include/configs/ppmc7xx.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * ppmc7xx.h
- * ---------
- *
- * Wind River PPMC 7xx/74xx board configuration file.
- *
- * By Richard Danter (richard.danter@windriver.com)
- * Copyright (C) 2005 Wind River Systems
- */
-
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_PPMC7XX
-
-
-/*===================================================================
- *
- * User configurable settings - Modify to your preference
- *
- *===================================================================
- */
-
-/*
- * Debug
- *
- * DEBUG - Define this is you want extra debug info
- * GTREGREAD - Required to build with debug
- * do_bdinfo - Required to build with debug
- */
-
-#ifdef DEBUG
-#define GTREGREAD(x) 0xFFFFFFFF
-#define do_bdinfo(a,b,c,d)
-#endif
-
-/*
- * CPU type
- *
- * CONFIG_7xx - We have a 750 or 755 CPU
- * CONFIG_74xx - We have a 7400 CPU
- * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
- * CONFIG_BUS_CLK - System bus clock in Hz
- */
-
-#define CONFIG_7xx
-#undef CONFIG_74xx
-#undef CONFIG_ALTIVEC
-#define CONFIG_BUS_CLK 66000000
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-/*
- * Monitor configuration
- *
- * List of command sets to include in shell
- *
- * The following command sets have been tested and known to work:
- *
- * CMD_CACHE - Cache control commands
- * CMD_MEMORY - Memory display, change and test commands
- * CMD_FLASH - Erase and program flash
- * CMD_ENV - Environment commands
- * CMD_RUN - Run commands stored in env vars
- * CMD_ELF - Load ELF files
- * CMD_NET - Networking/file download commands
- * CMD_PIN - ICMP Echo Request command
- * CMD_PCI - PCI Bus scanning command
- */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PCI
-
-#undef CONFIG_CMD_KGDB
-
-
-/*
- * Serial configuration
- *
- * CONFIG_CONS_INDEX - Serial console port number (COM1)
- * CONFIG_BAUDRATE - Serial speed
- */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-
-/*
- * PCI config
- *
- * CONFIG_PCI - Enable PCI bus
- * CONFIG_PCI_PNP - Enable Plug & Play support
- * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
- */
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-#undef CONFIG_PCI_SCAN_SHOW
-
-
-/*
- * Network config
- *
- * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
- * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
- */
-
-#define CONFIG_EEPRO100
-#define CONFIG_EEPRO100_SROM_WRITE
-
-
-/*
- * Enable extra init functions
- *
- * CONFIG_MISC_INIT_F - Call pre-relocation init functions
- * CONFIG_MISC_INIT_R - Call post relocation init functions
- */
-
-#undef CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
-
-
-/*
- * Boot config
- *
- * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
- * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
- */
-
-#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
- "bootm"
-#define CONFIG_BOOTDELAY 5
-
-
-/*===================================================================
- *
- * Board configuration settings - You should not need to modify these
- *
- *===================================================================
- */
-
-
-/*
- * Memory map
- *
- * This board runs in a standard CHRP (Map-B) configuration.
- *
- * Type Start End Size Width Chip Sel
- * ----------- ----------- ----------- ------- ------- --------
- * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
- * User LED's 0x78000000 RCS3
- * UART 0x7C000000 RCS2
- * Mailbox 0xFF000000 RCS1
- * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
- *
- * Flash sectors are laid out as follows.
- *
- * Sector Start End Size Comments
- * ------- ----------- ----------- ------- -----------
- * 0 0xFFC00000 0xFFC3FFFF 256KB
- * 1 0xFFC40000 0xFFC7FFFF 256KB
- * 2 0xFFC80000 0xFFCBFFFF 256KB
- * 3 0xFFCC0000 0xFFCFFFFF 256KB
- * 4 0xFFD00000 0xFFD3FFFF 256KB
- * 5 0xFFD40000 0xFFD7FFFF 256KB
- * 6 0xFFD80000 0xFFDBFFFF 256KB
- * 7 0xFFDC0000 0xFFDFFFFF 256KB
- * 8 0xFFE00000 0xFFE3FFFF 256KB
- * 9 0xFFE40000 0xFFE7FFFF 256KB
- * 10 0xFFE80000 0xFFEBFFFF 256KB
- * 11 0xFFEC0000 0xFFEFFFFF 256KB
- * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
- * 13 0xFFF40000 0xFFF7FFFF 256KB
- * 14 0xFFF80000 0xFFFBFFFF 256KB
- * 15 0xFFFC0000 0xFFFDFFFF 128KB
- * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
- * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
- * 18 0xFFFF0000 0xFFFFFFFF 64KB
- */
-
-
-/*
- * SDRAM config - see memory map details above.
- *
- * CONFIG_SYS_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
- * CONFIG_SYS_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
- */
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 0x04000000
-
-
-/*
- * Flash config - see memory map details above.
- *
- * CONFIG_SYS_FLASH_BASE - Start address of flash memory
- * CONFIG_SYS_FLASH_SIZE - Total size of contiguous flash mem
- * CONFIG_SYS_FLASH_ERASE_TOUT - Erase timeout in ms
- * CONFIG_SYS_FLASH_WRITE_TOUT - Write timeout in ms
- * CONFIG_SYS_MAX_FLASH_BANKS - Number of banks of flash on board
- * CONFIG_SYS_MAX_FLASH_SECT - Number of sectors in a bank
- */
-
-#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_FLASH_SIZE 0x00400000
-#define CONFIG_SYS_FLASH_ERASE_TOUT 250000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 5000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-
-/*
- * Monitor config - see memory map details above
- *
- * CONFIG_SYS_MONITOR_BASE - Base address of monitor code
- * CONFIG_SYS_MALLOC_LEN - Size of malloc pool (128KB)
- */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN 0x20000
-
-
-/*
- * Command shell settings
- *
- * CONFIG_SYS_BARGSIZE - Boot Argument buffer size
- * CONFIG_SYS_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB)
- * CONFIG_SYS_CBSIZE - Console Buffer (input) size
- * CONFIG_SYS_LOAD_ADDR - Default load address
- * CONFIG_SYS_LONGHELP - Provide more detailed help
- * CONFIG_SYS_MAXARGS - Number of args accepted by monitor commands
- * CONFIG_SYS_MEMTEST_START - Start address of test to run on RAM
- * CONFIG_SYS_MEMTEST_END - End address of RAM test
- * CONFIG_SYS_PBSIZE - Print Buffer (output) size
- * CONFIG_SYS_PROMPT - Prompt string
- */
-
-#define CONFIG_SYS_BARGSIZE 1024
-#define CONFIG_SYS_BOOTMAPSZ 0x800000
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_LOAD_ADDR 0x100000
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_MEMTEST_START 0x00040000
-#define CONFIG_SYS_MEMTEST_END 0x00040100
-#define CONFIG_SYS_PBSIZE 1024
-
-
-/*
- * Environment config - see memory map details above
- *
- * CONFIG_ENV_IS_IN_FLASH - The env variables are stored in flash
- * CONFIG_ENV_ADDR - Address of the sector containing env vars
- * CONFIG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
- * CONFIG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
- */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0xFFFE0000
-#define CONFIG_ENV_SIZE 0x1000
-#define CONFIG_ENV_ADDR_REDUND 0xFFFE8000
-#define CONFIG_ENV_SIZE_REDUND 0x1000
-#define CONFIG_ENV_SECT_SIZE 0x8000
-
-
-/*
- * Initial RAM config
- *
- * Since the main system RAM is initialised very early, we place the INIT_RAM
- * in the main system RAM just above the exception vectors. The contents are
- * copied to top of RAM by the init code.
- *
- * CONFIG_SYS_INIT_RAM_ADDR - Address of Init RAM, above exception vect
- * CONFIG_SYS_INIT_RAM_SIZE - Size of Init RAM
- * GENERATED_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
- * CONFIG_SYS_GBL_DATA_OFFSET - Start of global data, top of stack
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-
-/*
- * Initial BAT config
- *
- * BAT0 - System SDRAM
- * BAT1 - LED's and Serial Port
- * BAT2 - PCI Memory
- * BAT3 - PCI I/O including Flash Memory
- */
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-
-/*
- * Cache config
- *
- * CONFIG_SYS_CACHELINE_SIZE - Size of a cache line (CPU specific)
- * CONFIG_SYS_L2 - L2 cache enabled if defined
- * L2_INIT - L2 cache init flags
- * L2_ENABLE - L2 cache enable flags
- */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#undef CONFIG_SYS_L2
-#define L2_INIT 0
-#define L2_ENABLE 0
-
-
-/*
- * Clocks config
- *
- * CONFIG_SYS_BUS_CLK - Bus clock frequency in Hz
- * CONFIG_SYS_HZ - Decrementer freq in Hz
- */
-
-#define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK
-
-
-/*
- * Serial port config
- *
- * CONFIG_SYS_NS16550 - Include the NS16550 driver
- * CONFIG_SYS_NS16550_SERIAL - Include the serial (wrapper) driver
- * CONFIG_SYS_NS16550_CLK - Frequency of reference clock
- * CONFIG_SYS_NS16550_REG_SIZE - 64-bit accesses to 8-bit port
- * CONFIG_SYS_NS16550_COM1 - Base address of 1st serial port
- */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK 3686400
-#define CONFIG_SYS_NS16550_REG_SIZE -8
-#define CONFIG_SYS_NS16550_COM1 0x7C000000
-
-
-/*
- * PCI Config - Address Map B (CHRP)
- */
-
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
-#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
-#define CONFIG_SYS_PCI_MEM_SIZE 0x7D000000
-#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
-#define CONFIG_SYS_ISA_MEM_PHYS 0xFD000000
-#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
-#define CONFIG_SYS_PCI_IO_BUS 0x00800000
-#define CONFIG_SYS_PCI_IO_PHYS 0xFE800000
-#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
-#define CONFIG_SYS_ISA_IO_BUS 0x00000000
-#define CONFIG_SYS_ISA_IO_PHYS 0xFE000000
-#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
-
-
-/*
- * Extra init functions
- *
- * CONFIG_SYS_BOARD_ASM_INIT - Call assembly init code
- */
-
-#define CONFIG_SYS_BOARD_ASM_INIT
-
-#endif /* __CONFIG_H */