summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/MPC8349EMDS.h1
-rw-r--r--include/configs/P1010RDB.h2
-rw-r--r--include/configs/T2080QDS.h2
-rw-r--r--include/configs/bf506f-ezkit.h1
-rw-r--r--include/configs/bf525-ucr2.h1
-rw-r--r--include/configs/bf533-stamp.h29
-rw-r--r--include/configs/bf537-minotaur.h1
-rw-r--r--include/configs/bf537-srv1.h1
-rw-r--r--include/configs/blackstamp.h1
-rw-r--r--include/configs/cm-bf548.h2
-rw-r--r--include/configs/dnp5370.h1
11 files changed, 13 insertions, 29 deletions
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index a80a696..0374841 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -67,6 +67,7 @@
*/
#define CONFIG_SYS_FSL_DDR2
#ifdef CONFIG_SYS_FSL_DDR2
+#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_SPD_BUS_NUM 0
#define SPD_EEPROM_ADDRESS1 0x52
#define SPD_EEPROM_ADDRESS2 0x51
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index eab386a..1ed5e1d 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -173,7 +173,7 @@
#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
#endif
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x1fffffff
#define CONFIG_PANIC_HANG /* do not reset board on panic */
diff --git a/include/configs/T2080QDS.h b/include/configs/T2080QDS.h
index ad09816..bff001f 100644
--- a/include/configs/T2080QDS.h
+++ b/include/configs/T2080QDS.h
@@ -155,7 +155,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
#define CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR3
-#define CONFIG_FSL_DDR_INTERACTIVE
+#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SYS_SPD_BUS_NUM 0
#define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */
#define SPD_EEPROM_ADDRESS1 0x51
diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h
index 77b6735..5ad3ee7 100644
--- a/include/configs/bf506f-ezkit.h
+++ b/include/configs/bf506f-ezkit.h
@@ -94,6 +94,7 @@
#define CONFIG_DCACHE_OFF
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BAUDRATE 115200
+#define CONFIG_BFIN_SERIAL
#define CONFIG_CMD_MEMORY
#undef CONFIG_GZIP
diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h
index 1f65130..008f4b5 100644
--- a/include/configs/bf525-ucr2.h
+++ b/include/configs/bf525-ucr2.h
@@ -85,6 +85,7 @@
#define CONFIG_UART_CONSOLE 0
#define CONFIG_BAUDRATE 115200
+#define CONFIG_BFIN_SERIAL
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
#define CONFIG_BOOTCOMMAND "run sfboot"
#define CONFIG_BOOTDELAY 5
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index a22c868..f5b9658 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -80,33 +80,8 @@
/*
* Software (bit-bang) I2C driver configuration
*/
-#define PF_SCL PF3
-#define PF_SDA PF2
-#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;")
-#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); \
- *pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); \
- *pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); \
- asm("ssync;")
-#define I2C_SDA(bit) if (bit) { \
- *pFIO_FLAG_S = PF_SDA; \
- asm("ssync;"); \
- } \
- else { \
- *pFIO_FLAG_C = PF_SDA; \
- asm("ssync;"); \
- }
-#define I2C_SCL(bit) if (bit) { \
- *pFIO_FLAG_S = PF_SCL; \
- asm("ssync;"); \
- } \
- else { \
- *pFIO_FLAG_C = PF_SCL; \
- asm("ssync;"); \
- }
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
/*
* Flash Settings
diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h
index feb9d73..156eeab 100644
--- a/include/configs/bf537-minotaur.h
+++ b/include/configs/bf537-minotaur.h
@@ -136,6 +136,7 @@
#define CONFIG_BAUDRATE 57600
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BFIN_SERIAL
#define CONFIG_PANIC_HANG 1
#define CONFIG_RTC_BFIN 1
diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h
index 1de8ffe..e12d761 100644
--- a/include/configs/bf537-srv1.h
+++ b/include/configs/bf537-srv1.h
@@ -136,6 +136,7 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BFIN_SERIAL
#define CONFIG_PANIC_HANG 1
#define CONFIG_RTC_BFIN 1
diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 5b3aac7..7de4253 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -195,6 +195,7 @@
#define CONFIG_BAUDRATE 57600
#define CONFIG_LOADS_ECHO 1
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BFIN_SERIAL
/*
* I2C settings
diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 3c9eeb5..7f27eda 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -118,6 +118,8 @@
#define CONFIG_BOOTCOMMAND "run flashboot"
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
+#define CONFIG_ADI_GPIO2
+
#ifndef __ADSPBF542__
/* Don't waste time transferring a logo over the UART */
# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h
index d0e72e3..4f2c742 100644
--- a/include/configs/dnp5370.h
+++ b/include/configs/dnp5370.h
@@ -103,6 +103,7 @@
#define CONFIG_DNP5370_EXT_WD_DISABLE 1
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BFIN_SERIAL
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTCOMMAND "bootm 0x20030000"
#define CONFIG_BOOTARGS "console=ttyBF0,115200 root=/dev/mtdblock3 rootfstype=ext2"