diff options
Diffstat (limited to 'include/configs')
224 files changed, 470 insertions, 2032 deletions
diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 8f3a672..35e3e6f 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_A3000 1 diff --git a/include/configs/APC405.h b/include/configs/APC405.h index afc9ae8..2678f50 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -19,7 +19,6 @@ * (easy to change) */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_APCG405 1 /* ...on a APC405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/AR405.h b/include/configs/AR405.h index a4bd4b1..45dd46a 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_AR405 1 /* ...on a AR405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 2f53407..2ff9b59 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_ASH405 1 /* ...on a ASH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h deleted file mode 100644 index ef76ce4..0000000 --- a/include/configs/AdderUSB.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2006 CodeHermit. - * Bryan O'Donoghue <bodonoghue@codehermit.ie> - * - * Provides support for USB console on the Analogue & Micro Adder87x - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ADDERUSB__ -#define __ADDERUSB__ - -/* Include the board port */ -#include "Adder.h" - -#define CONFIG_USB_DEVICE /* Include UDC driver */ -#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */ -#define CONFIG_SYS_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */ -#define CONFIG_SYS_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Console is in env */ - -/* If you have a USB-IF assigned VendorID then you may wish to define - * your own vendor specific values either in BoardName.h or directly in - * usbd_vendor_info.h - */ - -/* -#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie" -#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot" -#define CONFIG_USBD_VENDORID 0xFFFF -#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF -#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE -*/ - -#endif /* __ADDERUSB_H__ */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index c182158..64acc88 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -16,8 +16,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -34,11 +34,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -115,7 +114,7 @@ #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -608,7 +607,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -621,7 +620,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 377db7b..802e9cc 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -22,8 +22,7 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on a TQM5200 module */ #define CONFIG_BC3450 1 /* ... on a BC3450 mainboard */ diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 584aba8..a163e3d 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -21,7 +21,7 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_NAND @@ -38,7 +38,7 @@ #define CONFIG_SPL_MAX_SIZE 8192 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 #define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 @@ -55,7 +55,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48/P1020/P2020/P1010,etc*/ #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -326,7 +325,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_IS_IN_NAND #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 6170cbc..052a0f1 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -22,7 +22,7 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 1 #ifdef CONFIG_SPIFLASH @@ -30,7 +30,7 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_NAND @@ -47,7 +47,7 @@ #define CONFIG_SPL_MAX_SIZE 8192 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 #define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 @@ -55,7 +55,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x8ff80000 +#define CONFIG_SYS_TEXT_BASE 0x8ff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -71,7 +71,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ @@ -540,6 +539,7 @@ combinations. this should be removed later */ #if defined(CONFIG_RAMBOOT_SDCARD) #define CONFIG_ENV_IS_IN_MMC +#define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_RAMBOOT_SPIFLASH) @@ -554,7 +554,7 @@ combinations. this should be removed later #elif defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ @@ -562,13 +562,9 @@ combinations. this should be removed later #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#define CONFIG_ENV_SECT_SIZE 0x20000 #endif #define CONFIG_LOADS_ECHO /* echo on for serial download */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 1cfb2c2..92913c8 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -20,25 +20,73 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#endif + +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TEXT_BASE 0xff800000 +#define CONFIG_SPL_MAX_SIZE 8192 +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ @@ -130,6 +178,10 @@ (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) #define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_NO_FLASH +#endif + /* * IFC Definitions */ @@ -183,7 +235,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) /* 8Bit NAND Flash - K9F1G08U0B */ #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ @@ -215,6 +267,23 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 /* Set up IFC registers for boot location NOR/NAND */ +#ifdef CONFIG_NAND +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR @@ -230,6 +299,7 @@ #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif /* CPLD on IFC, selected by CS2 */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 @@ -269,7 +339,44 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) + +/* + * Config the L2 Cache as L2 SRAM + */ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) +#else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif +#endif +#endif /* Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -278,6 +385,10 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif + #define CONFIG_SERIAL_MULTI /* Enable both serial ports */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV @@ -364,13 +475,19 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 #endif +#elif defined(CONFIG_NAND) +#define CONFIG_ENV_IS_IN_NAND +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) #else -#define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_RANGE CONFIG_ENV_SIZE +#endif +#define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_BLOCK_SIZE #else +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 #endif diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index ba5dba5..27539d2 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -59,7 +59,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ #define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 0bb22be..5b872f6 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOM405 1 /* ...on a VOM405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC8000 diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 764ca22..a75c52f 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_CPC45 1 diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 85720a5..05106cd 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 793ee75..34252d4 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 53cf498..bf85439 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ #undef CONFIG_CPCI405_6U /* enable this for 6U boards */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index ce31032..7d58e9d 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ #define CONFIG_CPCI405AB 1 /* ...and special AB version */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index f09fcb0..c2598a3 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index ae36411..25365f7 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCIISER4 1 /* ...on a CPCIISER4 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index a4ce6c3..788fa0f 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -19,7 +19,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC405 family */ /* * Note: I make an "image" from U-Boot itself, which prefixes 0x40 diff --git a/include/configs/CU824.h b/include/configs/CU824.h index 6864027..dc98a56 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_CU824 1 diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 74e79e2..68e4a7f 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DP405 1 /* ...on a DP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 433077d..9be2310 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -17,7 +17,6 @@ * (easy to change) */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DU405 1 /* ...on a DU405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 71be122..be5494b 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -21,7 +21,6 @@ */ #define CONFIG_DU440 1 /* Board is esd DU440 */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333400 /* external freq to pll */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h deleted file mode 100644 index 208b599..0000000 --- a/include/configs/EXBITGEN.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_EXBITGEN 1 /* on a Exbit Generic board */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ - -/* I2C configuration */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ - -/* environment is in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 /* 1010110 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit internal addressing */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 /* ... and 1 bit in I2C address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 4 bytes per page */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 40 /* write takes up to 40 msec */ -#define CONFIG_ENV_OFFSET 4 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 350 /* that is 350 bytes only! */ -#endif - -#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ -/* Explanation: - autbooting is altogether disabled and cannot be - enabled if CONFIG_BOOTDELAY is negative. - If you want shorter bootdelay, then - - "setenv bootdelay <delay>" to the proper value -*/ - -#define CONFIG_BOOTCOMMAND "bootm 20400000 20800000" - -#define CONFIG_BOOTARGS "root=/dev/ram " \ - "ramdisk_size=32768 " \ - "console=ttyS0,115200 " \ - "ram=128M debug" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_PPC4xx_EMAC -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/* UART configuration */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* Default baud rate */ -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#undef CONFIG_PCI /* no pci support */ - -/*----------------------------------------------------------------------- - * External peripheral base address - *----------------------------------------------------------------------- - */ -#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ - -#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000 -#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000 -#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH0_BASE 0xFFF80000 -#define CONFIG_SYS_FLASH0_SIZE 0x00080000 -#define CONFIG_SYS_FLASH1_BASE 0x20000000 -#define CONFIG_SYS_FLASH1_SIZE 0x02000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_RAMSTART -#endif - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 5 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x00060000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x00010000 /* see README - env sector total size */ -#endif - -/* On Chip Memory location/size */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 - -/* Global info and initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif -#endif /* __CONFIG_H */ diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 5c537ce..0c66092 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_G2000 1 /* ...on a PLU405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 26b3bdf..033dcbf 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -24,7 +24,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_HH405 1 /* ...on a HH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 62a7f93..e0a233b 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -22,7 +22,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_HIDDEN_DRAGON 1 diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 5e16653..1783b9f 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_HUB405 1 /* ...on a HUB405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h index bbfee7d..6a3a11c 100644 --- a/include/configs/HWW1U1A.h +++ b/include/configs/HWW1U1A.h @@ -13,7 +13,6 @@ /* High-level system configuration options */ #define CONFIG_BOOKE /* Power/PowerPC Book-E */ #define CONFIG_E500 /* e500 (Power ISA v2.03 with SPE) */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 family */ #define CONFIG_FSL_ELBC /* FreeScale Enhanced LocalBus Cntlr */ #define CONFIG_FSL_LAW /* FreeScale Local Access Window */ #define CONFIG_P2020 /* FreeScale P2020 */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 52368f8..1861aa8 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -13,8 +13,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ /* diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 5738ea9..5cc2557 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -20,8 +20,6 @@ #define CONFIG_JSE 1 /* JSE has a PPC405GPr */ #define CONFIG_405GP 1 - /* ... which is a 4xxx series */ -#define CONFIG_4x 1 /* ... with a 33MHz OSC. connected to the SysCLK input */ #define CONFIG_SYS_CLK_FREQ 33333333 /* ... with on-chip memory here (4KBytes) */ diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 39eb2ef..546b725 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -23,7 +23,6 @@ #define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index 8a40029..3dcea0b 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -16,7 +16,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC837x 1 #define CONFIG_MPC8377 1 diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 6715435..69ab5bb 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -89,7 +89,6 @@ #define CONFIG_METROBOX 1 /* Board is Metrobox */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 6042a1e..68824fd 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -17,7 +17,6 @@ * (easy to change) ***********************************************************/ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_MIP405 1 /* ...on a MIP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 1bf1bf8..e84d12f 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -29,7 +29,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_MOUSSE 1 diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 0131b9c..bf974fd 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -13,7 +13,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 07719e9..69b2cb1 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -14,7 +14,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 #define CONFIG_MPC8313ERDB 1 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index aedb529..3dd52ce 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -35,7 +35,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC831x 1 /* MPC831x CPU family */ #define CONFIG_MPC8315 1 /* MPC8315 CPU specific */ #define CONFIG_MPC8315ERDB 1 /* MPC8315ERDB board specific */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index c4c771b..65a63e2 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -14,7 +14,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC832x 1 /* MPC832x CPU specific */ #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f5b6202..1735b3c 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -12,7 +12,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC832x 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 7640d06..6b7d648 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index ffb9a15..398918a 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -47,7 +47,6 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC83xx 1 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index d4c82cd..aefde74 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -14,7 +14,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 01e7ac7..1b8bad1 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -19,7 +19,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360ERDK 1 /* MPC8360ERDK board specific */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index f52e77a..695e47b 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -12,7 +12,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 938f7ab..1d1f4c0 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -13,7 +13,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XERDB 1 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9b7cc64..57bf04f 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -56,7 +56,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8536 1 #define CONFIG_MPC8536DS 1 diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 2d42b25..37c2b94 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -21,7 +21,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_MPC8540 1 /* MPC8540 specific */ #define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index b9ad034..5d229a0 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -16,7 +16,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8541 1 /* MPC8541 specific */ #define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 90fc2da..dade6d3 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -14,7 +14,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8544 1 #define CONFIG_MPC8544DS 1 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 5fff1e2..190c668 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -20,7 +20,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 23c6b07..5263ffc 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -16,7 +16,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8555 1 /* MPC8555 specific */ #define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 44b7679..ac78d48 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -21,7 +21,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ #define CONFIG_MPC8560 1 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 4f438a8..02a5acf 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -13,7 +13,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index d877e8b..33cadb9 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -13,7 +13,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8569 1 /* MPC8569 specific */ #define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 44d83a2..f457719 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -44,7 +44,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8572 1 #define CONFIG_MPC8572DS 1 #define CONFIG_MP 1 /* support multiple processors */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index f930fcd..e6d570a 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -14,7 +14,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8610 1 /* MPC8610 specific */ #define CONFIG_MPC8610HPCD 1 /* MPC8610HPCD board specific */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 65d61c2..7443ace 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -17,7 +17,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ #define CONFIG_MP 1 /* support multiple processors */ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index b24f6ee..c5c9290 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_MUSENKI 1 diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 9d49de7..99e4e90 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -13,7 +13,6 @@ #include <version.h> -#define CONFIG_MPC5xxx 1 #define CONFIG_MPC5200 1 #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index efdf1aa..30af691 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC834x 1 #define CONFIG_MPC8343 1 diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 4100b85..aa2d9c0 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -40,7 +40,6 @@ #define ERR_LED(code) #endif -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_MVBLUE 1 diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h deleted file mode 100644 index 73cd2a9..0000000 --- a/include/configs/MVS1.h +++ /dev/null @@ -1,384 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_MVS 1 /* ...on a MVsensor module */ -#define CONFIG_MVS_16BIT_FLASH /* ...with 16-bit flash access */ -#define CONFIG_8xx_GCLK_FREQ 50000000/* ... and a 50 MHz CPU */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#undef CONFIG_8xx_CONS_SMC1 /* Console is *NOT* on SMC1 */ -#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 115200 /* console baudrate */ -#define CONFIG_BOOTDELAY 5 /* autoboot after this many seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo To mount root over NFS use \"run bootnet\";" \ - "echo To mount root from FLASH use \"run bootflash\";" \ - "echo" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw" -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_WATCHDOG /* watchdog disabled/enabled */ - -#undef CONFIG_STATUS_LED /* Status LED disabled/enabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_VENDOREX - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_RUN - - -/* - * Miscellaneous configurable options - */ -#undef CONFIG_SYS_LONGHELP /* undef to save memory */ - -#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot ?? */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 - -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 192 kB for Monitor */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip (for AMD320DB chip) */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* 4MB flash - use bottom sectors of a bottom boot sector flash (16 bit access) */ -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector (bottom boot sector) */ -#define CONFIG_ENV_SIZE 0x2000 /* Used Size of Environment Sector 8k */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PCCARD 0 /* **DON'T** Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 0 /* max. no. of IDE buses */ -#define CONFIG_SYS_IDE_MAXDEVICE 0 /* max. no. of drives per IDE bus */ - - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#undef FLASH_BASE1_PRELIM - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - - -/* - * FLASH timing: - */ -/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_2_CLK | OR_EHTR | OR_BI) -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -/* -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \ - OR_SCY_5_CLK | OR_EHTR) -*/ - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#ifdef CONFIG_MVS_16BIT_FLASH -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) -#else -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) -#endif - -#undef CONFIG_SYS_OR1_REMAP -#undef CONFIG_SYS_OR1_PRELIM -#undef CONFIG_SYS_BR1_PRELIM -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ -#undef SDRAM_BASE3_PRELIM -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#undef CONFIG_SYS_OR3_PRELIM -#undef CONFIG_SYS_BR3_PRELIM - - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ -#define CONFIG_SYS_MAMR_PTA 98 - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index f69b9a8..bb565b6 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -13,7 +13,6 @@ #include <version.h> -#define CONFIG_MPC5xxx 1 #define CONFIG_MPC5200 1 #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 7baba93..4680afe 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_OCRTC 1 /* ...on a OCRTC board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h deleted file mode 100644 index 5a9bee3..0000000 --- a/include/configs/ORSG.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_ORSG 1 /* ...on a ORSG board */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - -#define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND "go fff00100" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ELF -#define CONFIG_CMD_BSP -#define CONFIG_CMD_EEPROM - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */ -#undef CONFIG_PCI_PNP /* no pci plug-and-play */ - /* resource configuration */ - -#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0411 /* PCI Device ID: ORSG */ -#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFD0000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#if 0 /* Use NVRAM for environment variables */ -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */ -#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */ - -#else /* Use EEPROM for environment variables */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */ - /* total size of a CAT24WC08 is 1024 bytes */ -#endif - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC08) for environment - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (Flash Bank 1) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x92015480 -#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 2 (PLD - FPGA-boot) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (PLD - OSL) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 4 (Spartan2 1) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/ - -/* Memory Bank 5 (Spartan2 2) initialization */ -#define CONFIG_SYS_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/ - -/* Memory Bank 6 (Virtex 1) initialization */ -#define CONFIG_SYS_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/ - -/* Memory Bank 7 (Virtex 2) initialization */ -#define CONFIG_SYS_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/ - - -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#endif /* __CONFIG_H */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index ea5cb65..f82fbca 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -23,13 +23,13 @@ #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_NAND @@ -46,7 +46,7 @@ #define CONFIG_SPL_MAX_SIZE 8192 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 #define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 @@ -57,11 +57,11 @@ #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ #define CONFIG_RAMBOOT_NAND #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -77,7 +77,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ @@ -661,18 +660,14 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_SIZE (16 * 1024) #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ #endif -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 934a6cb..6255b0a 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -32,7 +32,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) @@ -62,7 +62,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) @@ -96,7 +96,7 @@ #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) @@ -122,13 +122,12 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ #define CONFIG_P1022 #define CONFIG_P1022DS #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -653,11 +652,7 @@ #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 7de6814..b41cb4a 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -11,7 +11,7 @@ #define __CONFIG_H #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_SYS_MONITOR_BASE @@ -25,7 +25,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_P1023 #define CONFIG_MP /* support multiple processors */ @@ -260,11 +259,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ @@ -365,7 +360,7 @@ extern unsigned long get_clock_freq(void); /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xeff40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 11c74ff..b513545 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -32,7 +32,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_SYS_MONITOR_BASE @@ -46,7 +46,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_P1023 #define CONFIG_P1023RDS #define CONFIG_MP /* support multiple processors */ @@ -220,7 +219,7 @@ extern unsigned long get_clock_freq(void); /* NAND boot: 4K NAND loader config */ #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + CONFIG_SYS_NAND_SPL_SIZE) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x11000000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) @@ -386,7 +385,7 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_RAMBOOT_NAND) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000) @@ -394,11 +393,7 @@ extern unsigned long get_clock_freq(void); #endif #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif @@ -506,7 +501,7 @@ extern unsigned long get_clock_freq(void); /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x1f00000 diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 85cb076..32ed0c2 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -46,17 +46,17 @@ #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH 1 #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -70,7 +70,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/P1020/P2020,etc*/ #define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ @@ -267,7 +266,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* NAND boot: 4K NAND loader config */ #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) #define CONFIG_SYS_NAND_U_BOOT_START (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) @@ -495,7 +494,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_RAMBOOT_NAND) #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) + #define CONFIG_ENV_OFFSET ((768*1024)+CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_RAMBOOT_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION @@ -513,11 +512,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif #else #define CONFIG_ENV_IS_IN_FLASH 1 - #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 - #define CONFIG_ENV_ADDR 0xfff80000 - #else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index ce3c762..d414b84 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -29,7 +29,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/P1020/P2020,etc*/ #define CONFIG_P2020 1 #define CONFIG_P2020COME 1 #define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index ada6c7b..3d0b5c2 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -20,27 +20,26 @@ #ifdef CONFIG_SDCARD #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f40000 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f40000 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc #endif /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_P2020 1 #define CONFIG_P2020DS 1 #define CONFIG_MP 1 /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -578,11 +577,7 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH 1 -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index ee71252..47c6384 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -18,8 +18,9 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -36,11 +37,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -93,12 +93,12 @@ #define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_ENV_OFFSET (512 * 1097) + #define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -511,14 +511,14 @@ unsigned long get_board_sys_clk(unsigned long dummy); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -531,7 +531,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 3b5c73e..0989407 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -20,7 +20,6 @@ * (easy to change) */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PCI405 1 /* ...on a PCI405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 29888b4..a6f505a 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -17,7 +17,6 @@ * (easy to change) ***********************************************************/ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PIP405 1 /* ...on a PIP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 947b3d8..8705161 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PLU405 1 /* ...on a PLU405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 557a8ba..de46216 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -14,8 +14,7 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_PM520 1 /* ... on PM520 board */ +#define CONFIG_PM520 1 /* PM520 board */ #define CONFIG_SYS_TEXT_BASE 0xfff00000 diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 9fab4b2..c68d9a6 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -13,7 +13,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PMC405 1 /* ...on a PMC405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 0984095..94b9547 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PMC405DE 1 /* ...on a PMC405DE board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index efe6960..fd39109 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -24,7 +24,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF90000 diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 1b17afa..e277d0d 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -59,7 +59,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ #define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 40fb63d..46157cc 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -16,7 +16,6 @@ #define CONFIG_NAND_U_BOOT #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index 8a689b3..2c0cb89 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_SANDPOINT 1 diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index a17f5ad..2664d5b 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_SANDPOINT 1 diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 7d0bc04..8234a82 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -32,8 +32,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg #endif /* High Level Configuration Options */ @@ -41,11 +41,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -93,12 +92,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -167,7 +166,7 @@ unsigned long get_board_ddr_clk(void); /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR3 @@ -414,9 +413,9 @@ unsigned long get_board_ddr_clk(void); /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ -#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 @@ -583,17 +582,17 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index d721139..5e988c2 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -40,11 +40,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -92,12 +91,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (3 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -521,17 +520,17 @@ #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index 2c02d9d..aafa813 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -40,11 +40,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -92,12 +91,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (3 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -529,17 +528,17 @@ #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T2080QDS.h b/include/configs/T2080QDS.h index bff001f..9bd0fe2 100644 --- a/include/configs/T2080QDS.h +++ b/include/configs/T2080QDS.h @@ -27,7 +27,6 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #define CONFIG_ENABLE_36BIT_PHYS @@ -45,8 +44,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg #endif #define CONFIG_SRIO_PCIE_BOOT_MASTER @@ -60,7 +59,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -103,12 +102,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -544,14 +543,14 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -564,7 +563,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h index 5e228f3..c81c457 100644 --- a/include/configs/T4240EMU.h +++ b/include/configs/T4240EMU.h @@ -98,7 +98,7 @@ #define CONFIG_SYS_INTERLAKEN #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -122,7 +122,7 @@ "bank_intlv=auto;" \ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ +"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=t4240emu/ramdisk.uboot\0" \ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index c96df54..0d43c27 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -21,8 +21,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -64,12 +64,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1097) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -165,6 +165,9 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_BRDCFG5 0x55 +#define QIXIS_MUX_SDHC 2 +#define QIXIS_MUX_SDHC_WIDTH8 1 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) #define CONFIG_SYS_CSPR3_EXT (0xf) @@ -376,14 +379,14 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -396,7 +399,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -466,6 +469,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_ESDHC_DETECT_QUIRK \ + (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \ + IS_SVR_REV(get_svr(), 1, 0)) +#define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \ + (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8)) #endif #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 90f7fc4..b4daedc 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #define CONFIG_TB5200 1 /* ... on a TB5200 base board */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 7aba009..92128b9 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -25,8 +25,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */ /* diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 13500ee..69c0336 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 15cf2bd..6762e3a 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -16,7 +16,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x specific */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_TQM834X 1 /* TQM834X board specific */ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index acc4fdc..a58eeca 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -24,8 +24,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_TOTAL5200 1 /* ... on Total5200 board */ /* diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 3d46afe..d4a4b68 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOH405 1 /* ...on a VOH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 319a9a2..c06897b 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -16,7 +16,6 @@ * (easy to change) */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOM405 1 /* ...on a VOM405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC8000 diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 00a24ab..895ad46 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC405 family */ #define CONFIG_W7O 1 /* ...on a Wave 7 Optics board */ #define CONFIG_W7OLMC 1 /* ...specifically an LMC */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 8ed2fa2..2a38116 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC405 family */ #define CONFIG_W7O 1 /* ...on a Wave 7 Optics board */ #define CONFIG_W7OLMG 1 /* ...specifically an LMG */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index d2038e5..e4f0d19 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -19,7 +19,6 @@ #define CONFIG_IDENT_STRING " $Name: $" #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_WUH405 1 /* ...on a WUH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index d151869..1e65cd1 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -13,8 +13,7 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_A3M071 /* ... on A3M071 board */ +#define CONFIG_A3M071 /* A3M071 board */ #define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 6473702..cc88ac1 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_A4M072 1 /* ... on A4M072 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index d6cef88..aa584b7 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -27,7 +27,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/acadia.h b/include/configs/acadia.h index f23d549..5f3b5f9 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -16,7 +16,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_ACADIA 1 /* Board is Acadia */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EZ 1 /* Specifc 405EZ support*/ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/aev.h b/include/configs/aev.h index 0eafb3c..2dffcfb 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ #define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 08bba36..7849b22 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -14,7 +14,6 @@ #define CONFIG_ALPR 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 4de495a..d3c4756 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -34,7 +34,7 @@ /* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE (0x40337C00 - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ #define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */ @@ -69,6 +69,11 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +/* SPL USB Support */ +#define CONFIG_SPL_USB_SUPPORT +#define CONFIG_SPL_USB_HOST_SUPPORT +#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 + #define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_XHCI @@ -94,26 +99,34 @@ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ + "usbroot=/dev/sda2 rw\0" \ + "usbrootfstype=ext4 rootwait\0" \ + "usbdev=0\0" \ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ + "usbargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${usbroot} " \ + "rootfstype=${usbrootfstype}\0" \ "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "loadbootenv=load ${devtype} ${devnum} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ "ramargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${ramroot} " \ "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \ + "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=mmc dev ${mmcdev}; " \ + "setenv devnum ${mmcdev}; " \ "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ + "echo SD/MMC found on device ${devnum};" \ "if run loadbootenv; then " \ "echo Loaded environment from ${bootenv};" \ "run importbootenv;" \ @@ -129,6 +142,26 @@ "bootz ${loadaddr} - ${fdtaddr}; " \ "fi;" \ "fi;\0" \ + "usbboot=" \ + "setenv devnum ${usbdev}; " \ + "setenv devtype usb; " \ + "usb start ${usbdev}; " \ + "if usb dev ${usbdev}; then " \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadimage; then " \ + "run loadfdt; " \ + "echo Booting from usb ${usbdev}...; " \ + "run usbargs;" \ + "bootz ${loadaddr} - ${fdtaddr}; " \ + "fi;" \ + "fi\0" \ "findfdt="\ "if test $board_name = AM43EPOS; then " \ "setenv fdtfile am43x-epos-evm.dtb; fi; " \ @@ -139,7 +172,8 @@ #define CONFIG_BOOTCOMMAND \ "run findfdt; " \ - "run mmcboot;" + "run mmcboot;" \ + "run usbboot;" #endif #endif /* __CONFIG_AM43XX_EVM_H */ diff --git a/include/configs/aria.h b/include/configs/aria.h index b8d955a..c36cf33 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -31,7 +31,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 7e367f3..9584d82 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -117,6 +117,10 @@ #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + /* MMC SPL */ #define CONFIG_EXYNOS_SPL #define CONFIG_SPL diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 597bede..9c81e31 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100 diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index bd4dca5..066d09a 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -12,7 +12,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100MKII diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index fd76572..8f3fd0b 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATSTK1002 diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 2562460..63704b1 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7001 #define CONFIG_ATSTK1003 diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 8e32a10..331a60d 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7002 #define CONFIG_ATSTK1004 diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 9ce2264..bbe0aea 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATSTK1006 diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 326e3d6..97da1e9 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -17,7 +17,6 @@ #define CONFIG_BAMBOO 1 /* Board is BAMBOO */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h index 33e0496..8bd71c6 100644 --- a/include/configs/bluestone.h +++ b/include/configs/bluestone.h @@ -16,7 +16,6 @@ #define CONFIG_APM821XX 1 /* APM821XX series */ #define CONFIG_HOSTNAME bluestone -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 2b9c1c9..ea7b104 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_BUBINGA 1 /* ...on a BUBINGA board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/canmb.h b/include/configs/canmb.h index d929bde..c901793 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -13,8 +13,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_CANMB 1 /* ... on canmb board - we need this for FEC.C */ /* diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index f6faeec..620a0f5 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -33,7 +33,6 @@ #endif #define CONFIG_440 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index ac3d6bd..7c693d6 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -11,8 +11,7 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ #define CONFIG_SYS_TEXT_BASE 0xfc000000 diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 46d4f98..868813f 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -41,7 +41,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ #define CONFIG_P1022 #define CONFIG_CONTROLCENTERD #define CONFIG_MP /* support multiple processors */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 969b990..72432e4 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -15,15 +15,19 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg #if defined(CONFIG_P3041DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg #elif defined(CONFIG_P4080DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg #elif defined(CONFIG_P5020DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg #elif defined(CONFIG_P5040DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif @@ -41,11 +45,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -91,12 +94,12 @@ #define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1097) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -514,14 +517,14 @@ #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -534,7 +537,7 @@ #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index db5cead..ec926fd 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -23,8 +23,7 @@ * (easy to change) */ -#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_CPCI5200 1 /* ... on CPCI5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 8a848be..a5c6f84 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CSB272 1 /* on a Cogent CSB272 board */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 5c03417..6aa98ef 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CSB472 1 /* on a Cogent CSB472 board */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ diff --git a/include/configs/debris.h b/include/configs/debris.h index 621f895..4631b86 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -94,7 +94,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_DEBRIS 1 diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index bc5853e..2a8cb39 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -20,8 +20,7 @@ * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */ /* diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index c527be4..31fc65d 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_DLVISION_10G 1 /* on a DLVision-10G board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index c97963a..1e86c55 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_DLVISION 1 /* on a Neo board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index f210ed8..04ae3ca 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -4,7 +4,7 @@ * Lokesh Vutla <lokeshvutla@ti.com> * * Configuration settings for the TI DRA7XX board. - * See omap5_common.h for omap5 common settings. + * See ti_omap5_common.h for omap5 common settings. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -34,7 +34,7 @@ #define CONFIG_SYS_OMAP_ABE_SYSCK -#include <configs/omap5_common.h> +#include <configs/ti_omap5_common.h> /* CPSW Ethernet */ #define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index ca9792c..940be1f 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 /* #define CONFIG_MPC8240 1 */ #define CONFIG_MPC8245 1 #define CONFIG_EXALION 1 diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 8dc654e..3f0ad69 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -17,7 +17,6 @@ #define CONFIG_EBONY 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index fc015e6..338d3dc 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_FAVR32_EZKIT diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 560363d..b555d82 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -23,8 +23,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ /* diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index a6f1aff..6810b3b 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -21,7 +21,6 @@ #define CONFIG_440GR 1 /* Specific PPC440GR support */ #define CONFIG_HOSTNAME gdppc440etx #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index 938ee86..73534ad 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -11,7 +11,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 3f2fadb..4f0603a 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -8,7 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_HAMMERHEAD diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 1c74a2e..a1a88b5 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -13,9 +13,8 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_HMI1001 1 /* HMI1001 board */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +#define CONFIG_HMI1001 1 /* HMI1001 board */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/icon.h b/include/configs/icon.h index eafcf5a..bbe9b59 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -16,7 +16,6 @@ * High Level Configuration Options */ #define CONFIG_ICON 1 /* Board is icon */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 608d759..f321975 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -16,9 +16,8 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_INKA4X0 1 /* INKA4x0 board */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +#define CONFIG_INKA4X0 1 /* INKA4x0 board */ /* * Valid values for CONFIG_SYS_TEXT_BASE are: diff --git a/include/configs/intip.h b/include/configs/intip.h index d3d7a44..b56b3aa 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -30,7 +30,6 @@ #define CONFIG_IDENT_STRING " intip 0.06" #endif #define CONFIG_440 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/io.h b/include/configs/io.h index 2d67cfc..7f86767 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_IO 1 /* on a Io board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/io64.h b/include/configs/io64.h index 39ed285..6915b20 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -20,7 +20,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_IO64 1 /* Board is Io64 */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 788c715..d34b91d 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_IOCON 1 /* on a IoCon board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index 408168b..41ced15 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -16,9 +16,8 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPX5200 1 /* ... on MPX5200 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#define CONFIG_MPX5200 1 /* MPX5200 board */ +#define CONFIG_MPC5200_DDR 1 /* use DDR RAM */ #define CONFIG_IPEK01 /* Motherboard is ipek01 */ #define CONFIG_SYS_TEXT_BASE 0xfc000000 diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 71e8ece..7dfaa22 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -13,8 +13,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* especially an MPC5200 */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_JUPITER 1 /* ... on Jupiter board */ /* diff --git a/include/configs/katmai.h b/include/configs/katmai.h index ca0df2d..fa72eb0 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -18,7 +18,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_KATMAI 1 /* Board is Katmai */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ #define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index d2acc28..0695d2d 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -19,7 +19,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_KILAUEA 1 /* Board is Kilauea */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h index 47355ab..29c6f60 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km8309-common.h @@ -15,7 +15,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 50330cc..2466649 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -24,15 +24,14 @@ #define CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/keymile/kmp204x/pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/keymile/kmp204x/pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ diff --git a/include/configs/korat.h b/include/configs/korat.h index 811ff99..5494a60 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -22,7 +22,6 @@ * High Level Configuration Options */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 #ifdef CONFIG_KORAT_PERMANENT diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 251327a..c352a1c 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -8,7 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_KVME080 1 diff --git a/include/configs/luan.h b/include/configs/luan.h index 67f75c7..15e4a7e 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -17,7 +17,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_LUAN 1 /* Board is Luan */ #define CONFIG_440SP 1 /* Specific PPC440SP support */ -#define CONFIG_4xx 1 /* PPC4xx family */ #define CONFIG_440 1 #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index e9c8d8f..07ddfc4 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -22,7 +22,6 @@ #define CONFIG_LWMON5 1 /* Board is lwmon5 */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifdef CONFIG_LCD4_LWMON5 #define CONFIG_SYS_TEXT_BASE 0x01000000 /* SPL U-Boot TEXT_BASE */ diff --git a/include/configs/makalu.h b/include/configs/makalu.h index d6207eb..fd4c26e 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -19,7 +19,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_MAKALU 1 /* Board is Makalu */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33330000 /* ext frequency to pll */ diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index 21b17f6..60e8716 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -12,8 +12,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* MPC5200 CPU */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 1b9e2d0..a317782 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -14,8 +14,7 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MCC200 1 /* ... on MCC200 board */ +#define CONFIG_MCC200 1 /* MCC200 board */ /* * Valid values for CONFIG_SYS_TEXT_BASE are: diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index d415ecd..6c19817 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -29,7 +29,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 047e171..b270429 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -23,8 +23,7 @@ * (easy to change) */ -#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_MECP5200 1 /* ... on MECP5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 3d79239..fc7ecfa 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_MIMC200 diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 8071ac3..e8b0593 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -15,8 +15,7 @@ */ /* CPU and board */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 38337b4..7de245b 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -29,7 +29,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index de7a53a..4ae9afd 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -13,7 +13,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308_P1M 1 /* mpc8308_p1m board specific */ diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h deleted file mode 100644 index 4cac8ee..0000000 --- a/include/configs/mpq101.h +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Copyright 2011 Alex Dubov <oakad@yahoo.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Merury Computers MPQ101 board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_36BIT -# define CONFIG_PHYS_64BIT -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE /* BOOKE */ -#define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ -#define CONFIG_MPC8548 /* MPC8548 specific */ -#define CONFIG_MPQ101 /* MPQ101 board specific */ - -#define CONFIG_SYS_SRIO /* enable serial RapidIO */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ -#define CONFIG_FSL_LAW /* Use common FSL init code */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_PANIC_HANG - -/* - * Only possible on E500 Version 2 or newer cores. - */ -#define CONFIG_ENABLE_36BIT_PHYS - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_ADDR_MAP -# define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - - -#define CONFIG_SYS_CLK_FREQ 33000000 /* sysclk for MPC85xx */ - -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR2 - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* Fixed 512MB DDR2 parameters */ -#define CONFIG_SYS_SDRAM_SIZE_LOG 29 /* DDR is 512MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014102 -#define CONFIG_SYS_DDR_TIMING_3 0x00010000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x5c47a432 -#define CONFIG_SYS_DDR_TIMING_1_PERF 0x49352322 -#define CONFIG_SYS_DDR_TIMING_2 0x03984cce -#define CONFIG_SYS_DDR_TIMING_2_PERF 0x14904cca -#define CONFIG_SYS_DDR_MODE_1 0x00400442 -#define CONFIG_SYS_DDR_MODE_1_PERF 0x00480432 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_2_PERF 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x08200100 -#define CONFIG_SYS_DDR_INTERVAL_PERF 0x06180100 -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_CONTROL 0xc3008000 /* Type = DDR2 */ -#define CONFIG_SYS_DDR_CONTROL2 0x04400000 - -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_SYS_MEMTEST_START 0x0ff00000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0ffffffc - -/* - * RAM definitions - */ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ - - -/* - * FLASH on the Local Bus - * One bank, 128M, using the CFI driver. - */ -#define CONFIG_SYS_BOOT_BLOCK 0xf8000000 /* boot TLB block */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 128M */ - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_FLASH_BASE_PHYS 0xff8000000ull -#else -# define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -/* 0xf8001801 */ -#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ - | BR_PS_32 | BR_V) - -/* 0xf8006ff7 */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(128) | OR_GPCM_XAM | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 | OR_GPCM_TRLX \ - | OR_GPCM_EHTR | OR_GPCM_EAD) - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 -/* - * When initializing flash, if we cannot find the manufacturer ID, - * assume this is the AMD flash. - */ -#define CONFIG_ASSUME_AMD_FLASH - -/* - * Environment parameters - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_USE_PPCENV -#define ENV_IS_EMBEDDED -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */ -#define CONFIG_ENV_SIZE 0x800 - -/* Environment at the start of flash sector, before text. */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SIZE) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_TEXT_BASE 0xfffc0800 -#define CONFIG_SYS_LDSCRIPT "board/mercury/mpq101/u-boot.lds" - -/* - * Cypress CY7C67200 USB controller on the Local Bus. - * Not supported by u-boot at present. - */ -#define CONFIG_SYS_LBC_OPTION_BASE 0xf0000000 - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_LBC_OPTION_BASE_PHYS 0xff0000000ull -#else -# define CONFIG_SYS_LBC_OPTION_BASE_PHYS CONFIG_SYS_LBC_OPTION_BASE -#endif - -/* 0xf0001001 */ -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBC_OPTION_BASE_PHYS) \ - | BR_PS_16 | BR_V) - -/* fffff002 */ -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(0x8000) | OR_GPCM_XAM \ - | OR_GPCM_BCTLD | OR_GPCM_EHTR) - -/* - * Serial Ports - */ -#define CONFIG_CONS_INDEX 2 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, 9600, \ - 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* - * I2C buses and peripherals - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* I2C RTC - M41T81 */ -#define CONFIG_RTC_M41T62 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/* I2C EEPROM - 24C256 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_BUS_NUM 1 - -/* - * RapidIO MMU - */ -#ifdef CONFIG_SYS_SRIO -# define CONFIG_SRIO1 -# define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000 -# define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ - -# ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_SRIO1_MEM_PHYS 0xfc0000000ull -# else -# define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_VIRT -# endif -#endif - -/* - * Ethernet - */ -#ifdef CONFIG_TSEC_ENET - -# define CONFIG_MII /* MII PHY management */ -# define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ - -# define CONFIG_TSEC1 -# define CONFIG_TSEC1_NAME "eTSEC0" -# define TSEC1_PHY_ADDR 0x10 -# define TSEC1_PHYIDX 0 -# define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC2 -# define CONFIG_TSEC2_NAME "eTSEC1" -# define TSEC2_PHY_ADDR 0x11 -# define TSEC2_PHYIDX 0 -# define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC3 -# define CONFIG_TSEC3_NAME "eTSEC2" -# define TSEC3_PHY_ADDR 0x12 -# define TSEC3_PHYIDX 0 -# define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC4 -# define CONFIG_TSEC4_NAME "eTSEC3" -# define TSEC4_PHY_ADDR 0x13 -# define TSEC4_PHYIDX 0 -# define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -/* Options are: eTSEC[0-3] */ -# define CONFIG_ETHPRIME "eTSEC0" -# define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ -#endif - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_JFFS2 - -/* - * Miscellaneous configurable options - */ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -#define CONFIG_FIT /* new uImage format support */ -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "MPQ-101=> " /* Monitor Command Prompt */ - -/* Console I/O Buffer Size */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 -#else -# define CONFIG_SYS_CBSIZE 256 -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) - -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Basic Environment Configuration - */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ - -/*default location for tftp and bootm*/ -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -#endif /* __CONFIG_H */ diff --git a/include/configs/munices.h b/include/configs/munices.h index 3bda8eb..e65a14a 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -11,8 +11,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ #define CONFIG_MUNICES 1 /* ... on MUNICes board */ diff --git a/include/configs/neo.h b/include/configs/neo.h index 62ea8ec..d549985 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -10,7 +10,6 @@ #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_NEO 1 /* on a Neo board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index ce08454..18714ea 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -16,7 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index f3fb585..4ff2f05 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -26,7 +26,6 @@ #define CONFIG_OCOTEA 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 1b566c0..c58bc91 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -241,6 +241,8 @@ "setenv fdtfile omap3-beagle.dtb; fi; " \ "if test $beaglerev = Cx; then " \ "setenv fdtfile omap3-beagle.dtb; fi; " \ + "if test $beaglerev = C4; then " \ + "setenv fdtfile omap3-beagle.dtb; fi; " \ "if test $beaglerev = xMAB; then " \ "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ "if test $beaglerev = xMC; then " \ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 71062a6..20fbbec 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -10,20 +10,13 @@ #ifndef __IGEP00X0_H #define __IGEP00X0_H -#include <asm/sizes.h> - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON +#ifdef CONFIG_BOOT_NAND +#define CONFIG_NAND +#endif -#define CONFIG_SDRC /* The chip has SDRC controller */ +#define CONFIG_NR_DRAM_BANKS 2 -#include <asm/arch/cpu.h> -#include <asm/arch/omap3.h> +#include <configs/ti_omap3_common.h> #include <asm/mach-types.h> /* @@ -32,47 +25,12 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - #define CONFIG_MISC_INIT_R -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 -#define CONFIG_OF_LIBFDT -#define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD -/* - * NS16550 Configuration - */ - -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* select serial console configuration */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ - 115200} -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 - /* define to enable boot progress via leds */ #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) @@ -95,21 +53,10 @@ #define CONFIG_USBD_MANUFACTURER "Texas Instruments" #define CONFIG_USBD_PRODUCT_NAME "IGEP" -/* commands to include */ -#include <config_cmd_default.h> - #define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #ifdef CONFIG_BOOT_ONENAND #define CONFIG_CMD_ONENAND /* ONENAND support */ #endif -#ifdef CONFIG_BOOT_NAND -#define CONFIG_CMD_NAND -#endif #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ @@ -117,24 +64,8 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING #define CONFIG_CMD_NFS /* NFS support */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_MTD_DEVICE - -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_IMLS /* List all found images */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_OMAP34XX -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER 1 - -#define CONFIG_BOOTDELAY 3 +/*#undef CONFIG_ENV_IS_NOWHERE*/ #define CONFIG_EXTRA_ENV_SETTINGS \ "usbtty=cdc_acm\0" \ @@ -205,48 +136,6 @@ "fi;" \ "run nandboot;" \ -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "U-Boot # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ - /* works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ - /* load address */ - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* - * Physical Memory Map - * - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - /* * FLASH and environment organization */ @@ -263,24 +152,16 @@ #define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET #endif -#ifdef CONFIG_BOOT_NAND +#ifdef CONFIG_NAND #define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_BASE NAND_BASE #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ #define CONFIG_ENV_ADDR NAND_ENV_OFFSET -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif /* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* * SMSC911x Ethernet */ #if defined(CONFIG_CMD_NET) @@ -289,54 +170,9 @@ #define CONFIG_SMC911X_BASE 0x2C000000 #endif /* (CONFIG_CMD_NET) */ -/* - * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader - * and older u-boot.bin with the new U-Boot SPL. - */ -#define CONFIG_SYS_TEXT_BASE 0x80008000 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -/* move malloc and bss high to prevent clashing with the main image */ -#define CONFIG_SYS_SPL_MALLOC_START 0x87000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -/* MMC boot config */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - +/* OneNAND boot config */ #ifdef CONFIG_BOOT_ONENAND #define CONFIG_SPL_ONENAND_SUPPORT - -/* OneNAND boot config */ #define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000 #define CONFIG_SYS_ONENAND_PAGE_SIZE 2048 #define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000 @@ -345,13 +181,8 @@ #endif -#ifdef CONFIG_BOOT_NAND -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC - /* NAND boot config */ +#ifdef CONFIG_NAND #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 @@ -363,8 +194,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif #endif /* __IGEP00X0_H */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 73dc088..7378acd 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -4,7 +4,7 @@ * Steve Sakoman <steve@sakoman.com> * * Configuration settings for the TI OMAP4 Panda board. - * See omap4_common.h for OMAP4 common part + * See ti_omap4_common.h for OMAP4 common part * * SPDX-License-Identifier: GPL-2.0+ */ @@ -36,7 +36,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#include <configs/omap4_common.h> +#include <configs/ti_omap4_common.h> #define CONFIG_CMD_NET /* GPIO */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index b352511..a837974 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -5,7 +5,7 @@ * Steve Sakoman <steve@sakoman.com> * * Configuration settings for the TI SDP4430 board. - * See omap4_common.h for OMAP4 common part + * See ti_omap4_common.h for OMAP4 common part * * SPDX-License-Identifier: GPL-2.0+ */ @@ -19,7 +19,7 @@ #define CONFIG_4430SDP 1 /* working with SDP */ #define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP -#include <configs/omap4_common.h> +#include <configs/ti_omap4_common.h> /* Battery Charger */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 76c5106..51dff23 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -4,7 +4,7 @@ * Sricharan R <r.sricharan@ti.com> * * Configuration settings for the TI EVM5430 board. - * See omap5_common.h for omap5 common settings. + * See ti_omap5_common.h for omap5 common settings. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -17,7 +17,7 @@ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" -#include <configs/omap5_common.h> +#include <configs/ti_omap5_common.h> #define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 UART3_BASE diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index c6df11b..117484d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -161,7 +161,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) @@ -191,7 +191,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) @@ -221,7 +221,7 @@ #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) @@ -247,7 +247,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -265,7 +265,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 -#define CONFIG_MPC85xx #define CONFIG_MP @@ -842,11 +841,7 @@ #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 9837100..601bac7 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -24,11 +24,11 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -42,7 +42,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 -#define CONFIG_MPC85xx #define CONFIG_MP @@ -407,11 +406,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 1fdd602..225567b 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -20,7 +20,6 @@ #define CONFIG_P3P440 1 /* Board is P3P440 */ #define CONFIG_440GP 1 /* Specifc GP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 5c61889..31a93c8 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -20,8 +20,7 @@ High Level Configuration Options (easy to change) -----------------------------------------------------------------------------*/ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ #define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */ /* FEC configuration and IDE */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 5a5fe7f..e6e06f2 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -23,7 +23,6 @@ #define CONFIG_PCS440EP 1 /* Board is PCS440EP */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 2a54e5c..553eb8f 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -30,7 +30,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #define CONFIG_SYS_TEXT_BASE 0xF0000000 diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 327be3f..be76478 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -22,8 +22,7 @@ * (easy to change) */ -#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_PF5200 1 /* ... on PF5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 20d6178..e91e805 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -15,7 +15,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_QUAD100HD 1 /* Board is Quad100hd */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EP 1 /* Specifc 405EP support*/ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/redwood.h b/include/configs/redwood.h index c8bd02e..84d1e58 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -12,7 +12,6 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC460 family */ #define CONFIG_460SX 1 /* ... PPC460 family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 2fd1dc4..69dc210 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -17,7 +17,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_SBC405 1 /* ...on a WR SBC405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index b7f83e0..2516a3e 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -19,7 +19,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 4912d69..f28f350 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -38,7 +38,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_SBC8548 1 /* SBC8548 board specific */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 78f8219..8eb7276 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -21,7 +21,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_SBC8641D 1 /* SBC8641D board specific */ #define CONFIG_MP 1 /* support multiple processors */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 9a11150..14e033d 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -43,7 +43,6 @@ */ #define CONFIG_SC3 1 -#define CONFIG_4xx 1 #define CONFIG_405GP 1 #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index d2dedac..0e21ee3 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -27,7 +27,6 @@ #define CONFIG_HOSTNAME rainier #endif #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/socrates.h b/include/configs/socrates.h index fd590e4..c654a0e 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -25,7 +25,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ #define CONFIG_MPC8544 1 #define CONFIG_SOCRATES 1 diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 2a9c9a3..5fb40eb 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -22,7 +22,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/ #define CONFIG_MPC8560 1 diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index d0cb68a..914d821 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -22,7 +22,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/ #define CONFIG_MPC8560 1 diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 9ab9924..502e795 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -16,7 +16,6 @@ */ #define CONFIG_460GT 1 /* Specific PPC460GT */ #define CONFIG_440 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 54a5e3e..bd324ba 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -17,11 +17,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 4ebaf2e..5c0ce7a 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -13,7 +13,6 @@ #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_TAIHU 1 /* on a taihu board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 3dbfc6a..3d5c351 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -18,7 +18,6 @@ #define CONFIG_TAISHAN 1 /* Board is taishan */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h deleted file mode 100644 index 2901ed1..0000000 --- a/include/configs/tb0229.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * (C) Copyright 2003 - * Masami Komiya <mkomiya@sonare.it> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Config header file for TANBAC TB0229 board using an VR4131 CPU module - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */ -#define CONFIG_TB0229 1 /* on a TB0229 Board */ - -#ifndef CPU_CLOCK_RATE -#define CPU_CLOCK_RATE 200000000 /* 200 MHz clock for the MIPS core */ -#endif -#define CPU_TCLOCK_RATE 16588800 /* 16.5888 MHz for TClock */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"boot\\\" for the network boot using DHCP, TFTP and NFS;" \ - "echo Type \\\"run netboot_initrd\\\" for the network boot with initrd;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo Type \\\"run flash_local\\\" to mount local root filesystem;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netboot=dhcp;tftp;run netargs; bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs ip=dhcp\0" \ - "localargs=setenv bootargs root=1F02 ip=dhcp\0" \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "read-only=readonly\0" \ - "netargs=run nfsargs addmisc\0" \ - "flash_nfs=run nfsargs addmisc;" \ - "bootm ${kernel_addr}\0" \ - "flash_local=run localargs addmisc;" \ - "bootm ${kernel_addr}\0" \ - "netboot_initrd=dhcp;tftp;tftp 80600000 initrd;" \ - "setenv bootargs root=/dev/ram ramdisk_size=8192 ip=dhcp;"\ - "run addmisc;" \ - "bootm 80400000 80600000\0" \ - "rootpath=/export/miniroot-mipsel\0" \ - "autoload=no\0" \ - "kernel_addr=BFC60000\0" \ - "ramdisk_addr=B0100000\0" \ - "u-boot=u-boot.bin\0" \ - "bootfile=uImage\0" \ - "load=dhcp;tftp 80400000 ${u-boot}\0" \ - "load_kernel=dhcp;tftp 80400000 ${bootfile}\0" \ - "update_uboot=run load;" \ - "protect off BFC00000 BFC3FFFF;" \ - "erase BFC00000 BFC3FFFF;" \ - "cp.b 80400000 BFC00000 ${filesize}\0" \ - "update_kernel=run load_kernel;" \ - "erase BFC60000 BFD5FFFF;" \ - "cp.b 80400000 BFC60000 ${filesize}\0" \ - "initenv=erase bfc40000 bfc5ffff\0" \ - "" -/*#define CONFIG_BOOTCOMMAND "run flash_local" */ -#define CONFIG_BOOTCOMMAND "run netboot" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_PCI -#define CONFIG_CMD_ELF - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 - -#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xbfc00000 /* Flash Bank #1 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xBFC40000 -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#define CONFIG_NR_DRAM_BANKS 1 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 16384 -#define CONFIG_SYS_ICACHE_SIZE 16384 -#define CONFIG_SYS_CACHELINE_SIZE 16 - -/*----------------------------------------------------------------------- - * Serial Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 18432000 -#define CONFIG_SYS_NS16550_COM1 0xaf000800 - -/*----------------------------------------------------------------------- - * PCI stuff - */ -#define CONFIG_PCI -#define CONFIG_PCI_PNP -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -#define CONFIG_RTL8139 - -#endif /* __CONFIG_H */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 4364eef..91f97dd 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -73,6 +73,10 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif +#ifdef CONFIG_NAND +#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ +#endif + /* Now bring in the rest of the common code. */ #include <configs/ti_armv7_common.h> diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 99b60fc..69d69a5 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -45,11 +45,15 @@ #define CONFIG_BOOTDELAY 1 /* - * DDR information. We say (for simplicity) that we have 1 bank, - * always, even when we have more. We always start at 0x80000000, - * and we place the initial stack pointer in our SRAM. + * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined, + * we say (for simplicity) that we have 1 bank, always, even when + * we have more. We always start at 0x80000000, and we place the + * initial stack pointer in our SRAM. Otherwise, we can define + * CONFIG_NR_DRAM_BANKS before including this file. */ +#ifndef CONFIG_NR_DRAM_BANKS #define CONFIG_NR_DRAM_BANKS 1 +#endif #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) @@ -237,7 +241,6 @@ #define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */ #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h new file mode 100644 index 0000000..854cb78 --- /dev/null +++ b/include/configs/ti_omap3_common.h @@ -0,0 +1,73 @@ +/* + * ti_omap3_common.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + * + * For more details, please see the technical documents listed at + * http://www.ti.com/product/omap3530 + * http://www.ti.com/product/omap3630 + * http://www.ti.com/product/dm3730 + */ + +#ifndef __CONFIG_TI_OMAP3_COMMON_H__ +#define __CONFIG_TI_OMAP3_COMMON_H__ + +#define CONFIG_OMAP34XX + +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +/* The chip has SDRC controller */ +#define CONFIG_SDRC + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +/* NS16550 Configuration */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ + 115200} + +/* Select serial console configuration */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 + +/* Physical Memory Map */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +/* TWL4030 */ +#define CONFIG_TWL4030_POWER 1 + +/* SPL */ +#define CONFIG_SPL_TEXT_BASE 0x40200800 +#define CONFIG_SPL_MAX_SIZE (54 * 1024) +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SPL_POWER_SUPPORT + +#ifdef CONFIG_NAND +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_SIMPLE +#endif + +/* Now bring in the rest of the common code. */ +#include <configs/ti_armv7_common.h> + +#endif /* __CONFIG_TI_OMAP3_COMMON_H__ */ diff --git a/include/configs/omap4_common.h b/include/configs/ti_omap4_common.h index d099bfd..2f0e4c0 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -9,8 +9,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_OMAP4_COMMON_H -#define __CONFIG_OMAP4_COMMON_H +#ifndef __CONFIG_TI_OMAP4_COMMON_H +#define __CONFIG_TI_OMAP4_COMMON_H /* * High Level Configuration Options @@ -159,4 +159,8 @@ #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -#endif /* __CONFIG_OMAP4_COMMON_H */ +#ifdef CONFIG_NAND +#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ +#endif + +#endif /* __CONFIG_TI_OMAP4_COMMON_H */ diff --git a/include/configs/omap5_common.h b/include/configs/ti_omap5_common.h index c7fa37e..7b10fbd 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -14,8 +14,8 @@ * http://www.ti.com/product/omap5432 */ -#ifndef __CONFIG_OMAP5_COMMON_H -#define __CONFIG_OMAP5_COMMON_H +#ifndef __CONFIG_TI_OMAP5_COMMON_H +#define __CONFIG_TI_OMAP5_COMMON_H #define CONFIG_OMAP54XX #define CONFIG_DISPLAY_CPUINFO @@ -146,4 +146,8 @@ #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -#endif /* __CONFIG_OMAP5_COMMON_H */ +#ifdef CONFIG_NAND +#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ +#endif + +#endif /* __CONFIG_TI_OMAP5_COMMON_H */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 6cd15c2..fdd8b46 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -27,6 +27,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -143,7 +144,10 @@ "u-boot mmc 80 400;" \ "uImage ext4 0 2;" \ "exynos4210-trats.dtb ext4 0 2;" \ - ""PARTS_ROOT" part 0 5\0" + ""PARTS_BOOT" part 0 2;" \ + ""PARTS_ROOT" part 0 5;" \ + ""PARTS_DATA" part 0 6;" \ + ""PARTS_UMS" part 0 7\0" #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/trats2.h b/include/configs/trats2.h index c9ce828..83633b0 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -30,6 +30,7 @@ #define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -114,6 +115,7 @@ /* USB Composite download gadget - g_dnl */ #define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define DFU_DEFAULT_POLL_TIMEOUT 300 #define CONFIG_DFU_FUNCTION #define CONFIG_DFU_MMC @@ -173,7 +175,10 @@ "u-boot mmc 80 800;" \ "uImage ext4 0 2;" \ "exynos4412-trats2.dtb ext4 0 2;" \ - ""PARTS_ROOT" part 0 5\0" + ""PARTS_BOOT" part 0 2;" \ + ""PARTS_ROOT" part 0 5;" \ + ""PARTS_DATA" part 0 6;" \ + ""PARTS_UMS" part 0 7\0" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 8e6e246..5be62ec 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -30,7 +30,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_UTX8245 1 diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 0c54435..7f6b0c7 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -12,7 +12,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_V38B 1 /* ...on V38B board */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 5cf4ae5..00787bb 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 #define CONFIG_VE8313 1 diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 10738ac..29c32fe 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -101,7 +101,8 @@ #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\ - "netdev=25,0,0xf1010000,0xf1010010,eth0" + "netdev=25,0,0xf1010000,0xf1010010,eth0 "\ + "console=ttyAMA0,38400n1" /* * Static configuration when assigning fixed address diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index ce5f384..e851702 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -102,9 +102,9 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -/* SMSC9115 Ethernet from SMSC9118 family */ -#define CONFIG_SMC9111 1 -#define CONFIG_SMC9111_BASE (0x1a000000) +/* SMSC91C111 Ethernet Configuration */ +#define CONFIG_SMC91111 1 +#define CONFIG_SMC91111_BASE (0x01A000000) /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 7ecbafe..175311c 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -29,7 +29,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_VME8349 1 /* ESD VME8349 board specific */ diff --git a/include/configs/walnut.h b/include/configs/walnut.h index a569182..8b803a2 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_WALNUT 1 /* ...on a WALNUT board */ /* ...or on a SYCAMORE board */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h index 431e331..a0151fe 100644 --- a/include/configs/xilinx-ppc405.h +++ b/include/configs/xilinx-ppc405.h @@ -15,7 +15,6 @@ /* cpu parameter */ #define CONFIG_405 1 -#define CONFIG_4xx 1 #define CONFIG_XILINX_405 1 #include <configs/xilinx-ppc.h> diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h index 2ec3dd1..f457008 100644 --- a/include/configs/xilinx-ppc440.h +++ b/include/configs/xilinx-ppc440.h @@ -9,7 +9,6 @@ #define __CONFIG_GEN_H /*CPU*/ -#define CONFIG_4xx 1 #define CONFIG_440 1 #define CONFIG_XILINX_440 1 diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index eb193f8..ca322b2 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -18,7 +18,6 @@ #define CONFIG_XPEDITE1000 1 #define CONFIG_SYS_BOARD_NAME "XPedite1000" #define CONFIG_SYS_FORM_PMC 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 88d7f88..cbf4b8e 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -14,7 +14,6 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */ #define CONFIG_SYS_BOARD_NAME "XPedite5170" diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index f39d6f9..baa3039 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -16,7 +16,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 #define CONFIG_XPEDITE5200 1 #define CONFIG_SYS_BOARD_NAME "XPedite5200" diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index e1bdf90..bdf5576 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -16,7 +16,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8572 1 #define CONFIG_XPEDITE5370 1 #define CONFIG_SYS_BOARD_NAME "XPedite5370" diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 2328c7a..0b24f3e 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -16,7 +16,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_P2020 1 #define CONFIG_XPEDITE550X 1 #define CONFIG_SYS_BOARD_NAME "XPedite5500" diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 2dd742e..8508a80 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -23,7 +23,6 @@ #define CONFIG_HOSTNAME yellowstone #endif #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 5d584fb..76717e4 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -18,7 +18,6 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ #define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index d8aeb37..4d7a7fc 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -15,7 +15,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_ZEUS 1 /* Board is Zeus */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EP 1 /* Specifc 405EP support*/ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 |