diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/bf561-acvilon.h | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h new file mode 100644 index 0000000..0be170c --- /dev/null +++ b/include/configs/bf561-acvilon.h @@ -0,0 +1,178 @@ +/* + * U-boot - Configuration file for BF561 Acvilon System On Module + * For more information please go to http://www.niistt.ru/ + */ + +#ifndef __CONFIG_BF561_ACVILON_H__ +#define __CONFIG_BF561_ACVILON_H__ + +#include <asm/config-pre.h> + + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf561-0.5 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS + + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 12000000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 50 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 + + +/* + * Memory Settings + */ +#define CONFIG_MEM_ADD_WDTH 10 +#define CONFIG_MEM_SIZE 128 + +#define CONFIG_EBIU_SDRRC_VAL 0x300 +#define CONFIG_EBIU_SDGCTL_VAL 0x00B11189 + +#define CONFIG_EBIU_AMGCTL_VAL 0x4e +#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 +#define CONFIG_EBIU_AMBCTL1_VAL 0x99b35554 + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) + + +/* + * RTC Settings + */ +#define CONFIG_RTC_DS1337 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CONFIG_SYS_I2C_DTT_ADDR 0x49 +/*#define CONFIG_SYS_DTT_MAX_TEMP 70 +#define CONFIG_SYS_DTT_LOW_TEMP -30 +#define CONFIG_SYS_DTT_HYSTERESIS 3*/ + + +/* + * Network Settings + */ +#define ADI_CMDS_NETWORK 1 +#define CONFIG_NET_MULTI +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DTT + +#if defined(CONFIG_CMD_NET) + +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_32_BIT +/* #define CONFIG_SMC911X_16_BIT */ +#define CONFIG_SMC911X_BASE 0x28000000 + +#endif /* (CONFIG_CMD_NET) */ + +#define CONFIG_HOSTNAME bf561-acvilon + +/* Uncomment next line to use fixed MAC address */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ + + +/* + * Flash Settings + */ +#define CONFIG_SYS_NO_FLASH + + +/* + * I2C Settings + */ +#define CONFIG_HARD_I2C +/* Use 300kHz speed by default */ +#define CONFIG_SYS_I2C_SPEED 0x00 +#define CONFIG_PCA9564_I2C +#define CONFIG_PCA9564_BASE 0x2c000000 + + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL + + +/* + * Env Storage Settings + */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +/* #define CONFIG_CMD_SAVEENV */ +#define CONFIG_ENV_SECT_SIZE (1056 * 8) +#define CONFIG_ENV_OFFSET ((16 + 256) * 1056) +#define CONFIG_ENV_SIZE (8 * 1056) +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) + + +/* + * NAND Settings + * We're using NAND_PLAT driver to make things simplier + */ +#define CONFIG_NAND_PLAT +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BASE 0x24000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) +#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3)) +#define BFIN_NAND_READY PF10 +#define BFIN_NAND_WRITE(addr, cmd) \ + do { \ + bfin_write8(addr, cmd); \ + SSYNC(); \ + } while (0) + +#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) +#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) +#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO0_FLAG_D() & BFIN_NAND_READY) +#define NAND_PLAT_INIT() \ + do { \ + bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() & ~BFIN_NAND_READY); \ + bfin_write_FIO0_INEN(bfin_read_FIO0_INEN() | BFIN_NAND_READY); \ + } while (0) + + +/* + * Misc Settings + */ +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_BAUDRATE 57600 +#define CONFIG_SYS_PROMPT "Acvilon> " + + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> + +#endif /* __CONFIG_BF561_ACVILON_H__ */ |