diff options
Diffstat (limited to 'include/configs')
131 files changed, 175 insertions, 664 deletions
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index b2a5c19..c182158 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -289,6 +289,8 @@ unsigned long get_board_ddr_clk(void); /* NAND Flash on IFC */ #define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 #define CONFIG_SYS_NAND_BASE 0xff800000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) @@ -737,7 +739,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 499d8c2..584aba8 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -29,7 +29,7 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -382,7 +382,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #define CONFIG_USB_EHCI diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index a6601fe..6170cbc 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -38,7 +38,7 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -625,7 +625,6 @@ combinations. this should be removed later #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 4a5fc86..0bb22be 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -149,6 +149,9 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_MAX_ECCPOS 48 + /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 2d7fc59..71be122 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -406,7 +406,6 @@ int du440_phy_addr(int devnum); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #define CONFIG_SOURCE 1 diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index f366308..208b599 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -186,6 +186,5 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 4284d6a..5738ea9 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -274,6 +274,5 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 71e90d7..39eb2ef 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -273,7 +273,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 32ec0bf..6715435 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -338,7 +338,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index f248a56..6042a1e 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -396,7 +396,6 @@ ************************************************************/ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /************************************************************ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 0f9f436..aedb529 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -634,7 +634,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index a1e5f3b..c4c771b 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -481,7 +481,6 @@ #if (CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 71fc497..f5b6202 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -574,7 +574,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 0374841..7640d06 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -737,7 +737,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index e2ae596..ffb9a15 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -730,7 +730,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index ed780f1..d4c82cd 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -683,7 +683,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index d31be19..01e7ac7 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -544,7 +544,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 98ffb9c..f52e77a 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -662,7 +662,6 @@ extern int board_pci_host_broken(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index ca28c0e..938f7ab 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -678,7 +678,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9ab1bc1..9b7cc64 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -740,7 +740,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 046b14b..2d42b25 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -397,7 +397,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index eca3b53..b9ad034 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -410,7 +410,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 8132ec0..90fc2da 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -441,7 +441,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 6acd54d..5fff1e2 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -535,7 +535,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 5ffdd01..23c6b07 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -408,7 +408,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index bb9ae2d..44b7679 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -438,7 +438,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 7406ac3..4f438a8 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -430,7 +430,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index df5572b..d877e8b 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -566,7 +566,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 63480ec..44d83a2 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -682,7 +682,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 41ebe31..f930fcd 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -517,7 +517,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 0e666ba..65d61c2 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -670,7 +670,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index 9fd4551..88df94f 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -10,8 +10,6 @@ #define __MIGO_R_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4 1 #define CONFIG_CPU_SH7722 1 #define CONFIG_MIGO_R 1 diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 1ed5e1d..ea5cb65 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -37,7 +37,7 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -739,7 +739,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 262c3e5..934a6cb 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -75,6 +75,8 @@ #endif #define CONFIG_NAND_FSL_ELBC +#define CONFIG_SYS_NAND_MAX_ECCPOS 56 +#define CONFIG_SYS_NAND_MAX_OOBFREE 5 #ifdef CONFIG_NAND #define CONFIG_SPL @@ -725,7 +727,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 2aa1f59..11c74ff 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -469,7 +469,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index b592c19..85cb076 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -606,7 +606,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index 15d2a43..ce3c762 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -432,7 +432,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 9d3d9b3..ada6c7b 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -670,7 +670,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index b238574..ee71252 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -677,7 +677,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 1180724..29888b4 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -353,7 +353,6 @@ ************************************************************/ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /************************************************************ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 5ab9315..efe6960 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -492,7 +492,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* pass open firmware flat tree */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 43a5778..7d0bc04 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -233,6 +233,7 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RST_FORCE_MEM 0x01 #define CONFIG_SYS_CSPR3_EXT (0xf) #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ @@ -248,7 +249,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 @@ -682,7 +683,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 7931231..d721139 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -609,7 +609,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index eff08e3..2c02d9d 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -613,7 +613,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index fc25425..15cf2bd 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -495,7 +495,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 57b620d..d40185e 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -138,8 +138,6 @@ #if defined(CONFIG_CMD_KGDB) /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 115200 -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* Miscellaneous configurable options */ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 8fda1b1..00a24ab 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -301,7 +301,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 6836fc7..8ed2fa2 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -304,7 +304,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index 1205557..d6cef88 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -471,7 +471,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 3315f54..9b8bd78 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -58,8 +58,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/actux2.h b/include/configs/actux2.h index fb391ec..f0cbff7 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -51,8 +51,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/actux3.h b/include/configs/actux3.h index 61d96f5..7639107 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -49,8 +49,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/actux4.h b/include/configs/actux4.h index 2387279..12bd98a 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -56,8 +56,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 61fdeba..08bba36 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -349,7 +349,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* pass open firmware flat tree */ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index c9e9a03..0f38c92 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -125,7 +125,6 @@ */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index 933de52..462b2e2 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -11,8 +11,6 @@ #define __AP325RXA_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4 1 #define CONFIG_CPU_SH7723 1 #define CONFIG_AP325RXA 1 diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index 83a5c37..bb39491 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -10,9 +10,6 @@ #define __AP_SH4A_4A_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4 1 -#define CONFIG_SH4A 1 #define CONFIG_CPU_SH7734 1 #define CONFIG_AP_SH4A_4A 1 #define CONFIG_400MHZ_MODE 1 diff --git a/include/configs/aria.h b/include/configs/aria.h index 32216cd..b8d955a 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -507,7 +507,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/arndale.h b/include/configs/arndale.h index b7fb29e..7e367f3 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -85,6 +85,7 @@ #define CONFIG_DWMMC #define CONFIG_EXYNOS_DWMMC #define CONFIG_SUPPORT_EMMC_BOOT +#define CONFIG_BOUNCE_BUFFER #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index d3d6274..b41a823 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -61,7 +61,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 5ad3ee7..eed2d5b 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -56,6 +56,7 @@ /* * Flash Settings */ + #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_BASE 0x20000000 #define CONFIG_SYS_FLASH_CFI @@ -63,7 +64,9 @@ #define CONFIG_SYS_MAX_FLASH_SECT 71 #define CONFIG_CMD_FLASH #define CONFIG_MONITOR_IS_IN_RAM - +/* +#define CONFIG_SYS_NO_FLASH +*/ /* * SPI Settings @@ -71,11 +74,12 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 +/* #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_CMD_SF #define CONFIG_CMD_SPI - +*/ /* * Env Storage Settings diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index ee585c0..15ca1af 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -53,7 +53,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 #define CONFIG_EBIU_AMBCTL1_VAL 0x99b35554 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 404039a..fb6f948 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -90,6 +90,7 @@ */ #define CONFIG_SYS_I2C_SOFT #ifdef CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1 #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index cd37f9a..6e5774c 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -177,6 +177,7 @@ #define CONFIG_BAUDRATE 57600 #define CONFIG_LOADS_ECHO 1 #define CONFIG_UART_CONSOLE 0 +#define CONFIG_BFIN_SERIAL /* * U-Boot environment variables. Use "printenv" to examine. diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 8f10eba..2838012 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -55,7 +55,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) @@ -145,7 +145,7 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 3c0000;" \ "bootm 0x1000000\0" - +#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index a1c8e8a..da4cc67 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -54,7 +54,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) @@ -142,6 +142,7 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" +#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) /* diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 556b42a..d1d732f 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -204,7 +204,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 -#define CONFIG_KGDB_SER_INDEX 2 #endif /* diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 665295c..969b990 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -672,7 +672,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/csb272.h b/include/configs/csb272.h index ca0bffa..8a848be 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -99,7 +99,6 @@ */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 596095d..5c03417 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -98,7 +98,6 @@ */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 48b47cb..f210ed8 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -60,6 +60,7 @@ #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH_BAR #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h index 87b3314..1af7f16 100644 --- a/include/configs/dvlhost.h +++ b/include/configs/dvlhost.h @@ -57,8 +57,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 3483cf1..3a5cc74 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -23,9 +23,6 @@ */ #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4 1 -#define CONFIG_SH4A 1 #define CONFIG_CPU_SH7724 1 #define CONFIG_BOARD_LATE_INIT 1 #define CONFIG_ECOVEC 1 diff --git a/include/configs/espt.h b/include/configs/espt.h index 1bd7eec..de16be7 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -10,8 +10,6 @@ #ifndef __ESPT_H #define __ESPT_H -#define CONFIG_SH 1 -#define CONFIG_SH4 1 #define CONFIG_CPU_SH7763 1 #define CONFIG_ESPT 1 #define __LITTLE_ENDIAN 1 diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index d684790..414db42 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -98,6 +98,7 @@ #define CONFIG_DWMMC #define CONFIG_EXYNOS_DWMMC #define CONFIG_SUPPORT_EMMC_BOOT +#define CONFIG_BOUNCE_BUFFER #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 7700b38..50330cc 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -385,7 +385,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #define __USB_PHY_TYPE utmi diff --git a/include/configs/korat.h b/include/configs/korat.h index b09af19..811ff99 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -542,7 +542,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* Pass open firmware flat tree */ diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h deleted file mode 100644 index fcd809d..0000000 --- a/include/configs/linkstation.h +++ /dev/null @@ -1,504 +0,0 @@ -/* - * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * - * Standard configuration - all models - * 0xFFF00000 boot from flash - * - * Test configuration (boot from RAM using uloader.o) - * LinkStation HD-HLAN and KuroBox Standard - * 0x03F00000 boot from RAM - * LinkStation HD-HGLAN and KuroBox HG - * 0x07F00000 boot from RAM - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#if 0 -#define DEBUG -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -/*----------------------------------------------------------------------- - * User configurable settings: - * Mandatory settings: - * CONFIG_IPADDR_LS - the IP address of the LinkStation - * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP - * Optional settins: - * CONFIG_NCIP_LS - the adress of the computer running net console - * if not configured, it will be set to - * CONFIG_SERVERIP_LS - */ - - -#define CONFIG_IPADDR_LS 192.168.11.150 -#define CONFIG_SERVERIP_LS 192.168.11.149 - -#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS) -#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined -#endif - -#if !defined(CONFIG_NCIP_LS) -#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS -#endif - -/*---------------------------------------------------------------------- - * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING - *---------------------------------------------------------------------*/ - -#define CONFIG_MPC8245 1 -#define CONFIG_LINKSTATION 1 - -/*--------------------------------------- - * Supported models - * - * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN) - * LinkStation old model (CONFIG_LAN) - totally untested - * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN) - * - * Models not supported yet - * TeraStatin (CONFIG_HTGL) - */ - -#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) -#define CONFIG_IDENT_STRING " LinkStation / KuroBox" -#elif defined(CONFIG_HGLAN) -#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG" -#elif defined(CONFIG_HTGL) -#define CONFIG_IDENT_STRING " TeraStation" -#else -#error No LinkStation model defined -#endif - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_ZERO_BOOTDELAY_CHECK -#undef CONFIG_BOOT_RETRY_TIME - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Boot in %02d seconds ('s' to stop)...", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR "s" - -#define CONFIG_CMD_IDE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_EXT2 - -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_NISDOMAIN -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_NTPSERVER -#define CONFIG_BOOTP_TIMEOFFSET - -#define CONFIG_OF_LIBFDT 1 - -#define OF_STDOUT_PATH "/soc10x/serial@80004600" - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */ - -#define CONFIG_BOOTCOMMAND "run bootcmd1" -#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug" -#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm" - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) -#define UBFILE "share/u-boot/u-boot-hd.flash.bin" -#elif defined(CONFIG_HGLAN) -#define UBFILE "share/u-boot/u-boot-hg.flash.bin" -#elif defined(CONFIG_HTGL) -#define UBFILE "share/u-boot/u-boot-ht.flash.bin" -#else -#error No LinkStation model defined -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=no\0" \ - "stdin=nc\0" \ - "stdout=nc\0" \ - "stderr=nc\0" \ - "ipaddr="__stringify(CONFIG_IPADDR_LS)"\0" \ - "netmask=255.255.255.0\0" \ - "serverip="__stringify(CONFIG_SERVERIP_LS)"\0" \ - "ncip="__stringify(CONFIG_NCIP_LS)"\0" \ - "netretry=no\0" \ - "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \ - "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \ - "ldaddr=800000\0" \ - "hdpart=0:1\0" \ - "hdfile=boot/uImage\0" \ - "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \ - "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \ - "hdboot=run hdload;run boothd\0" \ - "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \ - "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ - "bootretry=30\0" \ - "bootcmd1=run hdboot;run flboot\0" \ - "bootcmd2=run flboot\0" \ - "bootcmd3=run emboot\0" \ - "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \ - "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \ - "ubpart=0:3\0" \ - "ubfile="UBFILE"\0" \ - "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \ - "ubsaddr=fff00000\0" \ - "ubeaddr=fff2ffff\0" \ - "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \ - "upgrade=run ubload ubflash\0" - -/*----------------------------------------------------------------------- - * PCI stuff - */ -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -/* Verified: CONFIG_PCI_PNP doesn't work */ -#undef CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW - -#ifndef CONFIG_PCI_PNP -/* Keep the following defines in sync with the BAT mappings */ - -#define PCI_ETH_IOADDR 0xbfff00 -#define PCI_ETH_MEMADDR 0xbffffc00 -#define PCI_IDE_IOADDR 0xbffed0 -#define PCI_IDE_MEMADDR 0xbffffb00 -#define PCI_USB0_IOADDR 0 -#define PCI_USB0_MEMADDR 0xbfffe000 -#define PCI_USB1_IOADDR 0 -#define PCI_USB1_MEMADDR 0xbfffd000 -#define PCI_USB2_IOADDR 0 -#define PCI_USB2_MEMADDR 0xbfffcf00 - -#endif - -/*----------------------------------------------------------------------- - * Ethernet stuff - */ - -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CONFIG_TULIP -#define CONFIG_TULIP_USE_IO -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_RTL8169 -#endif - -#define CONFIG_NET_RETRY_COUNT 5 - -#define CONFIG_NETCONSOLE - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_FLASH_SIZE 0x00400000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 -#define CONFIG_SYS_EUMB_ADDR 0x80000000 -#define CONFIG_SYS_PCI_MEM_ADDR 0xB0000000 -#define CONFIG_SYS_MISC_REGION_ADDR 0xFE000000 - -#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256 kB */ -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ - -/* Maximum amount of RAM */ -#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) -#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */ -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */ -#else -#error Unknown LinkStation type -#endif - -/*----------------------------------------------------------------------- - * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build - * - * RAM based builds are for testing purposes. A Linux module, uloader.o, - * exists to load U-Boot and pass control to it - * - * Always do "make clean" after changing the build type - */ -#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_RAMBOOT -#endif - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#if 1 /* RAM is available when the first C function is called */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000) -#else -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/*---------------------------------------------------------------------- - * Serial configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 57600 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4600) /* Console port */ -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) /* AVR port */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8245 user's manual. - * - * Unless indicated otherwise, the values are - * taken from the orignal Linkstation boot code - * - * Most of the low level configuration setttings are normally used - * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation. - * Low level initialisation is done in board/linkstation/early_init.S - * The values below are included for reference purpose only - */ - -/* FIXME: 32.768 MHz is the crystal frequency but */ -/* the real frequency is lower by about 0.75% */ -#define CONFIG_SYS_CLK_FREQ 32768000 - -/* Bit-field values for MCCR1. */ -#define CONFIG_SYS_ROMNAL 0 -#define CONFIG_SYS_ROMFAL 11 - -#define CONFIG_SYS_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */ -#define CONFIG_SYS_BANK1_ROW 0 -#define CONFIG_SYS_BANK2_ROW 0 -#define CONFIG_SYS_BANK3_ROW 0 -#define CONFIG_SYS_BANK4_ROW 0 -#define CONFIG_SYS_BANK5_ROW 0 -#define CONFIG_SYS_BANK6_ROW 0 -#define CONFIG_SYS_BANK7_ROW 0 - -/* Bit-field values for MCCR2. */ -#define CONFIG_SYS_TSWAIT 0 -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CONFIG_SYS_REFINT 0x15e0 -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_SYS_REFINT 0x1580 -#endif - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CONFIG_SYS_BSTOPRE 0x91c - -/* Bit-field values for MCCR3. */ -#define CONFIG_SYS_REFREC 7 - -/* Bit-field values for MCCR4. */ -#define CONFIG_SYS_PRETOACT 2 -#define CONFIG_SYS_ACTTOPRE 2 /* Original value was 2 */ -#define CONFIG_SYS_ACTORW 2 -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* For 100MHz bus */ -/*#define CONFIG_SYS_SDMODE_BURSTLEN 3*/ -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* For 133MHz bus */ -/*#define CONFIG_SYS_SDMODE_BURSTLEN 2*/ -#endif -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 /* Original setting but there is no EXTROM */ -#define CONFIG_SYS_REGDIMM 0 -#define CONFIG_SYS_DBUS_SIZE2 1 -#define CONFIG_SYS_SDMODE_WRAP 0 - -#define CONFIG_SYS_PGMAX 0x32 /* All boards use this setting. Original 0x92 */ -#define CONFIG_SYS_SDRAM_DSCD 0x30 - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0x15 - -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITETHROUGH not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ - -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* EUMB: 1MB of address space */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT1L (CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI Mem: 256MB of address space */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* PCI and local ROM/Flash: last 32MB of address space */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - * - * FIXME: This doesn't appear to be true for the newer kernels - * which map more that 8 MB - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#undef CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 72 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 12000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ - -#define CONFIG_ENV_IS_IN_FLASH -/* - * The original LinkStation flash organisation uses - * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader - * We use the last sector of this area to store the environment - * which leaves max. 384 kB for the U-Boot itself - */ -#define CONFIG_ENV_ADDR 0xFFF60000 -#define CONFIG_ENV_SIZE 0x00010000 -#define CONFIG_ENV_SECT_SIZE 0x00010000 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * IDE/ATA definitions - */ -#undef CONFIG_IDE_LED /* No IDE LED */ -#define CONFIG_IDE_RESET /* no reset for ide supported */ -#define CONFIG_IDE_PREINIT /* check for units */ -#define CONFIG_LBA48 /* 48 bit LBA supported */ - -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN) -#define CONFIG_SYS_IDE_MAXBUS 1 /* Scan only 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */ -#elif defined(CONFIG_HGTL) -#define CONFIG_SYS_IDE_MAXBUS 2 /* Max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ -#else -#error Config IDE: Unknown LinkStation type -#endif - -#define CONFIG_SYS_ATA_BASE_ADDR 0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for normal registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0 /* Offset for alternate registers */ - -/*----------------------------------------------------------------------- - * Partitions and file system - */ -#define CONFIG_DOS_PARTITION - -#endif /* __CONFIG_H */ diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h index 8e58fea..a269372 100644 --- a/include/configs/lp8x4x.h +++ b/include/configs/lp8x4x.h @@ -93,7 +93,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index b87df54..4ffe165 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -86,7 +86,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index c348329..e9c8d8f 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -660,7 +660,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 6501ea4..d415ecd 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -364,7 +364,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 4a8adf6..38337b4 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -520,7 +520,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h index ec09e15..4cac8ee 100644 --- a/include/configs/mpq101.h +++ b/include/configs/mpq101.h @@ -345,7 +345,6 @@ #ifdef CONFIG_CMD_KGDB # define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -# define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index fcf237e..8ae497c 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -24,8 +24,6 @@ #define CONFIG_VERSION_VARIABLE /* CPU and platform */ -#define CONFIG_SH 1 -#define CONFIG_SH3 1 #define CONFIG_CPU_SH7720 1 #define CONFIG_MPR2 1 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index ec8523e..585d68f 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -9,8 +9,6 @@ #ifndef __MS7720SE_H #define __MS7720SE_H -#define CONFIG_SH 1 -#define CONFIG_SH3 1 #define CONFIG_CPU_SH7720 1 #define CONFIG_MS7720SE 1 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 54fb7c3..1c8ada6 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -9,8 +9,6 @@ #ifndef __MS7722SE_H #define __MS7722SE_H -#define CONFIG_SH 1 -#define CONFIG_SH4 1 #define CONFIG_CPU_SH7722 1 #define CONFIG_MS7722SE 1 diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index eea3bd1..4cf8efe 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -9,8 +9,6 @@ #ifndef __MS7750SE_H #define __MS7750SE_H -#define CONFIG_SH 1 -#define CONFIG_SH4 1 #define CONFIG_CPU_SH7750 1 /* #define CONFIG_CPU_SH7751 1 */ /* #define CONFIG_CPU_TYPE_R 1 */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index c15d546..12667c5 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -86,8 +86,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ - /* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index c48790d..376dfdb 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -94,7 +94,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 2f128b8..76c5106 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -36,6 +36,7 @@ #define CONFIG_EFI_PARTITION #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART +#define CONFIG_HSMMC2_8BIT /* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 57ed019..c6df11b 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -928,7 +928,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 3fde7ca..1fdd602 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -303,6 +303,5 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ diff --git a/include/configs/palmld.h b/include/configs/palmld.h index a5b6e3a..2a9fd22 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -93,7 +93,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 7303e1c..de25407 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -95,7 +95,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index adf8519..3662663 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -94,7 +94,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 400cb3e..5a5fe7f 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -427,7 +427,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 266d107..2a54e5c 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -441,7 +441,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* POST support */ diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h index 5856ee1..f0ecc34 100644 --- a/include/configs/pxa-common.h +++ b/include/configs/pxa-common.h @@ -16,7 +16,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 -#define CONFIG_KGDB_SER_INDEX 2 #endif /* diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 84ad006..af7c076 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -199,7 +199,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 7b04e0c..20d6178 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -265,7 +265,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* ENVIRONMENT VARS */ diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index dd26a71..53128ec 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -10,9 +10,6 @@ #define __R0P7734_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4 1 -#define CONFIG_SH4A 1 #define CONFIG_CPU_SH7734 1 #define CONFIG_R0P7734 1 #define CONFIG_400MHZ_MODE 1 diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index ddcc975..24d0c34 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -3,8 +3,6 @@ #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4 1 #define CONFIG_CPU_SH7751 1 #define CONFIG_CPU_SH_TYPE_R 1 #define CONFIG_R2DPLUS 1 diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index f5e4daa..8156724 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -11,8 +11,6 @@ #define __R7780RP_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4A 1 #define CONFIG_CPU_SH7780 1 #define CONFIG_R7780MP 1 #define CONFIG_SYS_R7780MP_OLD_FLASH 1 diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index f144f84..92318c3 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -121,7 +121,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index acee4e8..5436324 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -11,8 +11,6 @@ #define __RSK7203_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH2 1 #define CONFIG_SH2A 1 #define CONFIG_CPU_SH7203 1 #define CONFIG_RSK7203 1 @@ -87,7 +85,7 @@ #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) +#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) /* Network interface */ #define CONFIG_SMC911X diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index a5dbb64..4aaa3ef 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -12,8 +12,6 @@ #define __RSK7264_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH2 1 #define CONFIG_SH2A 1 #define CONFIG_CPU_SH7264 1 #define CONFIG_RSK7264 1 @@ -67,7 +65,7 @@ #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) +#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) /* Network interface */ #define CONFIG_SMC911X diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h index 9f54160..11fc231 100644 --- a/include/configs/rsk7269.h +++ b/include/configs/rsk7269.h @@ -11,8 +11,6 @@ #define __RSK7269_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH2 1 #define CONFIG_SH2A 1 #define CONFIG_CPU_SH7269 1 #define CONFIG_RSK7269 1 @@ -66,7 +64,7 @@ #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) +#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) /* Network interface */ #define CONFIG_SMC911X diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 7e78a23..a6d5582 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -39,6 +39,9 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_PART +#define CONFIG_DOS_PARTITION +#define CONFIG_HOST_MAX_DEVICES 4 #define CONFIG_SYS_VSNPRINTF @@ -126,4 +129,6 @@ #define CONFIG_LZO #define CONFIG_LZMA +#define CONFIG_TPM_TIS_SANDBOX + #endif diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index a258fe8..b7f83e0 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -643,7 +643,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index bdb8eb5..4912d69 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -575,7 +575,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index dba948a..78f8219 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -523,7 +523,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index ebdc5c8..f06abbc 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -10,8 +10,6 @@ #define __SH7752EVB_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4A 1 #define CONFIG_SH_32BIT 1 #define CONFIG_CPU_SH7752 1 #define CONFIG_SH7752EVB 1 diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h new file mode 100644 index 0000000..e400db0 --- /dev/null +++ b/include/configs/sh7753evb.h @@ -0,0 +1,135 @@ +/* + * Configuation settings for the sh7753evb board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SH7753EVB_H +#define __SH7753EVB_H + +#undef DEBUG +#define CONFIG_SH_32BIT 1 +#define CONFIG_CPU_SH7753 1 +#define CONFIG_SH7753EVB 1 + +#define CONFIG_SYS_TEXT_BASE 0x5ff80000 +#define CONFIG_SYS_LDSCRIPT "board/renesas/sh7753evb/u-boot.lds" + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SF +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_MD5SUM +#define CONFIG_MD5 +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE + +/* MEMORY */ +#define SH7753EVB_SDRAM_BASE (0x40000000) +#define SH7753EVB_SDRAM_SIZE (512 * 1024 * 1024) + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF2 1 +#undef CONFIG_SYS_CONSOLE_INFO_QUIET +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE + +#define CONFIG_SYS_MEMTEST_START (SH7753EVB_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 480 * 1024 * 1024) +#undef CONFIG_SYS_ALT_MEMTEST +#undef CONFIG_SYS_MEMTEST_SCRATCH +#undef CONFIG_SYS_LOADS_BAUD_CHANGE + +#define CONFIG_SYS_SDRAM_BASE (SH7753EVB_SDRAM_BASE) +#define CONFIG_SYS_SDRAM_SIZE (SH7753EVB_SDRAM_SIZE) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \ + 128 * 1024 * 1024) + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_SYS_NO_FLASH + +/* Ether */ +#define CONFIG_SH_ETHER 1 +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 18 +#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1 +#define CONFIG_SH_ETHER_USE_GETHER 1 +#define CONFIG_PHYLIB +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII +#define CONFIG_PHY_VITESSE + +#define SH7753EVB_ETHERNET_MAC_BASE_SPI 0x00090000 +#define SH7753EVB_SPI_SECTOR_SIZE (64 * 1024) +#define SH7753EVB_ETHERNET_MAC_BASE SH7753EVB_ETHERNET_MAC_BASE_SPI +#define SH7753EVB_ETHERNET_MAC_SIZE 17 +#define SH7753EVB_ETHERNET_NUM_CH 2 +#define CONFIG_BOARD_LATE_INIT + +/* SPI */ +#define CONFIG_SH_SPI 1 +#define CONFIG_SH_SPI_BASE 0xfe002000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO 1 +#define CONFIG_SPI_FLASH_MACRONIX 1 + +/* MMCIF */ +#define CONFIG_MMC 1 +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_SH_MMCIF 1 +#define CONFIG_SH_MMCIF_ADDR 0xffcb0000 +#define CONFIG_SH_MMCIF_CLK 48000000 + +/* ENV setting */ +#define CONFIG_ENV_IS_EMBEDDED +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_ADDR (0x00080000) +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR) +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netboot=bootp; bootm\0" + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 48000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_TMU_CLK_DIV 4 +#endif /* __SH7753EVB_H */ diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index ce1add2..08bff1d 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -10,8 +10,6 @@ #define __SH7757LCR_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4A 1 #define CONFIG_SH_32BIT 1 #define CONFIG_CPU_SH7757 1 #define CONFIG_SH7757LCR 1 diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index a137788..2438318 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -10,8 +10,6 @@ #ifndef __SH7763RDP_H #define __SH7763RDP_H -#define CONFIG_SH 1 -#define CONFIG_SH4 1 #define CONFIG_CPU_SH7763 1 #define CONFIG_SH7763RDP 1 #define __LITTLE_ENDIAN 1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 4acbcab..2723eaf 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -10,8 +10,6 @@ #define __SH7785LCR_H #undef DEBUG -#define CONFIG_SH 1 -#define CONFIG_SH4A 1 #define CONFIG_CPU_SH7785 1 #define CONFIG_SH7785LCR 1 diff --git a/include/configs/shmin.h b/include/configs/shmin.h index 5c990fc..f8155ef 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -9,8 +9,6 @@ #ifndef __SHMIN_H #define __SHMIN_H -#define CONFIG_SH 1 -#define CONFIG_SH3 1 #define CONFIG_CPU_SH7706 1 /* T-SH7706LAN */ #define CONFIG_SHMIN 1 diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index a87444e..d4ae19f 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -101,8 +101,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 0e6b864..fd590e4 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -363,7 +363,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index ee1f1f3..2a9c9a3 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -341,7 +341,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*Note: change below for your network setting!!! */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 63dd767..d0cb68a 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -376,7 +376,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*Note: change below for your network setting!!! */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index d9b0ed0..54a5e3e 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -303,7 +303,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 627836a..58bcdc8 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -55,7 +55,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) @@ -144,6 +144,7 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" +#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) /* diff --git a/include/configs/trats.h b/include/configs/trats.h index 0877142..6cd15c2 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -99,6 +99,7 @@ #define CONFIG_THOR_FUNCTION #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define DFU_DEFAULT_POLL_TIMEOUT 300 #define CONFIG_DFU_FUNCTION #define CONFIG_DFU_MMC diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 0615117..b7804d2 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -125,7 +125,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 734d13f..7ecbafe 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -539,7 +539,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index c3ac612..71a89b6 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -124,7 +124,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 431ed96..2999d1b 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -84,7 +84,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 9d58738..d8aeb37 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -283,7 +283,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 904f3b0..e38fa89 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -117,7 +117,6 @@ unsigned char zipitz2_spi_read(void); */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* |