diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/platinum.h | 319 | ||||
| -rw-r--r-- | include/configs/platinum_picon.h | 31 | ||||
| -rw-r--r-- | include/configs/platinum_titanium.h | 38 |
3 files changed, 388 insertions, 0 deletions
diff --git a/include/configs/platinum.h b/include/configs/platinum.h new file mode 100644 index 0000000..134bb45 --- /dev/null +++ b/include/configs/platinum.h @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2014, Barco (www.barco.com) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLATINUM_CONFIG_H__ +#define __PLATINUM_CONFIG_H__ + +#define CONFIG_SYS_GENERIC_BOARD + +/* SPL */ +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT + +/* Location in NAND to read U-Boot from */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024) + +#include "imx6_spl.h" /* common IMX6 SPL configuration */ +#include "mx6_common.h" +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +/* + * Console configuration + */ + +#include <config_cmd_default.h> +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FUSE +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_I2C +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_TIME +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_USB + +/* + * Hardware configuration + */ + +/* GPIO config */ +#define CONFIG_MXC_GPIO + +/* UART config */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 + +/* I2C config */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* MMC config */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_DOS_PARTITION + +/* Ethernet config */ +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR + +#define CONFIG_PHYLIB + +/* USB config */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* Memory config */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#ifndef PHYS_SDRAM_SIZE +#define PHYS_SDRAM_SIZE (1024 << 20) +#endif + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#ifdef CONFIG_CMD_NAND + +/* NAND config */ +#define CONFIG_NAND_MXS +#ifndef CONFIG_SYS_NAND_MAX_CHIPS +#define CONFIG_SYS_NAND_MAX_CHIPS 2 +#endif +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA config, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* Fuse support */ +#define CONFIG_MXC_OCOTP + +/* Environment in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (16 << 20) +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#else /* CONFIG_CMD_NAND */ + +/* Environment in MMC */ +#define CONFIG_ENV_SIZE (8 << 10) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#endif /* CONFIG_CMD_NAND */ + +/* + * U-Boot configuration + */ + +/* Console boot messages */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Tag config */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Board startup config */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Device tree support */ +#define CONFIG_OF_LIBFDT + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + PHYS_SDRAM_SIZE - (12 << 20)) + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "run bootubi_scr" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_PREBOOT + +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* MTD/UBI/UBIFS config */ +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE + +#if (CONFIG_SYS_NAND_MAX_CHIPS == 1) +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ + "512k(env1),512k(env2),-(ubi)" +#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2) +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ + "512k(env1),512k(env2),495M(ubi0)," \ + "14M(res0),2M(res1)," \ + "512k(res2),512k(res3),-(ubi1)" +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +/* + * Environment configuration + */ + +#if (CONFIG_SYS_NAND_MAX_CHIPS == 1) +#define CONFIG_COMMON_ENV_UBI \ + "setubipartition=env set ubipartition ubi\0" \ + "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0" +#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2) +#define CONFIG_COMMON_ENV_UBI \ + "setubipartition=env set ubipartition ubi$boot_vol\0" \ + "setubirfs=env set ubirfs ubi0:rootfs\0" +#endif + +#define CONFIG_COMMON_ENV_MISC \ + "user=user\0" \ + "project="CONFIG_PLATINUM_PROJECT"\0" \ + "uimage=uImage\0" \ + "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \ + "serverip=serverip\0" \ + "memaddrlinux=0x10800000\0" \ + "memaddrsrc=0x11000000\0" \ + "memaddrdtb=0x12000000\0" \ + "console=ttymxc0\0" \ + "baudrate=115200\0" \ + "boot_scr=boot.uboot\0" \ + "boot_vol=0\0" \ + "mtdids="MTDIDS_DEFAULT"\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "mmcfs=ext2\0" \ + "mmcrootpart=1\0" \ + \ + "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \ + "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \ + "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \ + "setubifilelinux=env set ubifilelinux boot/$uimage\0" \ + "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \ + "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \ + "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \ + "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \ + \ + "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \ + "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \ + "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \ + "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \ + "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \ + "$mmcfilelinux\0" \ + "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \ + "$mmcfiledtb\0" \ + \ + "ubipart=ubi part $ubipartition\0" \ + "ubimount=ubifsmount $ubirfs\0" \ + \ + "setbootargscommon=env set bootargs $bootargs " \ + "console=$console,$baudrate enable_wait_mode=off\0" \ + "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \ + "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \ + "setbootargsubirfs=env set bootargs $bootargs " \ + "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \ + "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \ + "nfsroot=$serverip:$nfspath,v3,tcp\0" \ + "setbootargsmmcrfs=env set bootargs $bootargs " \ + "root=$mmcrootdev rootwait rw\0" \ + \ + "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \ + "setbootargscommon setbootargsmtd setbootargsdhcp " \ + "setbootargsnfsrfs;" \ + "run loadtftpkernel loadtftpdtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \ + "run setubipartition setubirfs;" \ + "run setbootargscommon setbootargsmtd " \ + "setbootargsubirfs;" \ + "run loadtftpkernel loadtftpdtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + "bootubi=run setubipartition setubirfs setubifilelinux " \ + "setubipfiledtb;" \ + "run setbootargscommon setbootargsmtd " \ + "setbootargsubirfs;" \ + "run ubipart ubimount loadubikernel loadubidtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + "bootubi_scr=run setubipartition setubirfs;" \ + "run ubipart ubimount;" \ + "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \ + "then source ${memaddrsrc}; else run bootubi; fi\0" \ + "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \ + "setbootargscommon setbootargsmmcrfs;" \ + "run loadmmckernel loadmmcdtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + \ + "bootcmd="CONFIG_BOOTCOMMAND"\0" + +#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \ + CONFIG_COMMON_ENV_UBI +#endif /* __PLATINUM_CONFIG_H__ */ diff --git a/include/configs/platinum_picon.h b/include/configs/platinum_picon.h new file mode 100644 index 0000000..4590df5 --- /dev/null +++ b/include/configs/platinum_picon.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2014, Barco (www.barco.com) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLATINUM_PICON_CONFIG_H__ +#define __PLATINUM_PICON_CONFIG_H__ + +#define CONFIG_PLATINUM_PICON +#define CONFIG_PLATINUM_BOARD "Barco Picon" +#define CONFIG_PLATINUM_PROJECT "picon" +#define CONFIG_PLATINUM_CPU "imx6dl" + +#define CONFIG_MX6 + +#include <configs/platinum.h> + +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_HOSTNAME picon + +#define CONFIG_SYS_PROMPT "picon > " + +#define CONFIG_PLATFORM_ENV_SETTINGS "\0" + +#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_PLATFORM_ENV_SETTINGS + +#endif /* __PLATINUM_PICON_CONFIG_H__ */ diff --git a/include/configs/platinum_titanium.h b/include/configs/platinum_titanium.h new file mode 100644 index 0000000..6789655 --- /dev/null +++ b/include/configs/platinum_titanium.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2014, Barco (www.barco.com) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLATINUM_TITANIUM_CONFIG_H__ +#define __PLATINUM_TITANIUM_CONFIG_H__ + +#define CONFIG_PLATINUM_TITANIUM +#define CONFIG_PLATINUM_BOARD "Barco Titanium" +#define CONFIG_PLATINUM_PROJECT "titanium" +#define CONFIG_PLATINUM_CPU "imx6q" + +#define CONFIG_MX6 + +#define PHYS_SDRAM_SIZE (512 << 20) +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +#include <configs/platinum.h> + +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 4 + +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_PHY_RESET_DELAY 1000 + +#define CONFIG_HOSTNAME titanium + +#define CONFIG_SYS_PROMPT "titanium > " + +#define CONFIG_PLATFORM_ENV_SETTINGS "\0" + +#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_PLATFORM_ENV_SETTINGS + +#endif /* __PLATINUM_TITANIUM_CONFIG_H__ */ |