summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/am335x_evm.h23
-rw-r--r--include/configs/am3517_evm.h5
-rw-r--r--include/configs/am43xx_evm.h204
-rw-r--r--include/configs/arndale.h1
-rw-r--r--include/configs/at91sam9x5ek.h13
-rw-r--r--include/configs/balloon3.h10
-rw-r--r--include/configs/cam_enc_4xx.h2
-rw-r--r--include/configs/cgtqmx6eval.h2
-rw-r--r--include/configs/cm_t35.h75
-rw-r--r--include/configs/exynos5-dt.h291
-rw-r--r--include/configs/exynos5250-dt.h285
-rw-r--r--include/configs/ib62x0.h38
-rw-r--r--include/configs/imx31_phycore.h1
-rw-r--r--include/configs/km_kirkwood.h10
-rw-r--r--include/configs/koelsch.h41
-rw-r--r--include/configs/lager.h35
-rw-r--r--include/configs/lp8x4x.h15
-rw-r--r--include/configs/m53evk.h16
-rw-r--r--include/configs/mx25pdk.h2
-rw-r--r--include/configs/mx28evk.h56
-rw-r--r--include/configs/mx31pdk.h1
-rw-r--r--include/configs/mx35pdk.h2
-rw-r--r--include/configs/mx51evk.h1
-rw-r--r--include/configs/mx53ard.h1
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/mx53smd.h2
-rw-r--r--include/configs/mx6_common.h1
-rw-r--r--include/configs/mx6qarm2.h1
-rw-r--r--include/configs/mx6sabre_common.h20
-rw-r--r--include/configs/nitrogen6x.h13
-rw-r--r--include/configs/omap3_beagle.h3
-rw-r--r--include/configs/omap3_zoom2.h237
-rw-r--r--include/configs/omap4_common.h11
-rw-r--r--include/configs/palmld.h10
-rw-r--r--include/configs/palmtc.h10
-rw-r--r--include/configs/scb9328.h6
-rw-r--r--include/configs/siemens-am33x-common.h2
-rw-r--r--include/configs/smdk5420.h56
-rw-r--r--include/configs/tam3517-common.h1
-rw-r--r--include/configs/tao3530.h363
-rw-r--r--include/configs/tec-ng.h84
-rw-r--r--include/configs/tegra114-common.h1
-rw-r--r--include/configs/tegra30-common.h1
-rw-r--r--include/configs/titanium.h1
-rw-r--r--include/configs/trats2.h3
-rw-r--r--include/configs/twister.h3
-rw-r--r--include/configs/udoo.h31
-rw-r--r--include/configs/vexpress_aemv8a.h189
-rw-r--r--include/configs/wandboard.h3
-rw-r--r--include/configs/zipitz2.h10
-rw-r--r--include/configs/zynq-common.h238
-rw-r--r--include/configs/zynq.h139
-rw-r--r--include/configs/zynq_microzed.h26
-rw-r--r--include/configs/zynq_zc70x.h29
-rw-r--r--include/configs/zynq_zc770.h42
-rw-r--r--include/configs/zynq_zed.h27
57 files changed, 1828 insertions, 869 deletions
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 8af4d6a..73a9adb 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -39,7 +39,6 @@
"${optargs} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
- "dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
"nandrootfstype=ubifs rootwait=1\0" \
"nandboot=echo Booting from nand ...; " \
@@ -66,8 +65,6 @@
"fdtfile=undefined\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
- "dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \
- "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
@@ -99,7 +96,6 @@
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t $loadaddr $filesize\0" \
- "dfu_alt_info_ram=" DFU_ALT_INFO_RAM "\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
@@ -162,7 +158,8 @@
"setenv fdtfile am335x-evmsk.dtb; fi; " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
- NANDARGS
+ NANDARGS \
+ DFUARGS
#endif
#define CONFIG_BOOTCOMMAND \
@@ -309,6 +306,7 @@
#define CONFIG_DFU_MMC
#define CONFIG_CMD_DFU
#define DFU_ALT_INFO_MMC \
+ "dfu_alt_info_mmc=" \
"boot part 0 1;" \
"rootfs part 0 2;" \
"MLO fat 0 1;" \
@@ -319,10 +317,11 @@
"spl-os-args fat 0 1;" \
"spl-os-image fat 0 1;" \
"u-boot.img fat 0 1;" \
- "uEnv.txt fat 0 1"
+ "uEnv.txt fat 0 1\0"
#ifdef CONFIG_NAND
#define CONFIG_DFU_NAND
#define DFU_ALT_INFO_NAND \
+ "dfu_alt_info_nand=" \
"SPL part 0 1;" \
"SPL.backup1 part 0 2;" \
"SPL.backup2 part 0 3;" \
@@ -330,13 +329,21 @@
"u-boot part 0 5;" \
"u-boot-spl-os part 0 6;" \
"kernel part 0 8;" \
- "rootfs part 0 9"
+ "rootfs part 0 9\0"
+#else
+#define DFU_ALT_INFO_NAND ""
#endif
#define CONFIG_DFU_RAM
#define DFU_ALT_INFO_RAM \
+ "dfu_alt_info_ram=" \
"kernel ram 0x80200000 0xD80000;" \
"fdt ram 0x80F80000 0x80000;" \
- "ramdisk ram 0x81000000 0x4000000"
+ "ramdisk ram 0x81000000 0x4000000\0"
+#define DFUARGS \
+ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
+ DFU_ALT_INFO_MMC \
+ DFU_ALT_INFO_RAM \
+ DFU_ALT_INFO_NAND
/*
* Default to using SPI for environment, etc.
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 1fa477a..b8b99c8 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -58,6 +58,11 @@
*/
/*
+ * OMAP GPIO configuration
+ */
+#define CONFIG_OMAP_GPIO
+
+/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index d9b6c16..4de495a 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -10,127 +10,64 @@
#define __CONFIG_AM43XX_EVM_H
#define CONFIG_AM43XX
-#define CONFIG_OMAP
-#define CONFIG_OMAP_COMMON
-#include <asm/arch/omap.h>
-
-#define CONFIG_DMA_COHERENT
-#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
-
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "U-Boot# "
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_VERSION_VARIABLE
-
-/* set to negative value for no autoboot */
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-/* Clock Defines */
-#define V_OSCK 24000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK)
-
-#define CONFIG_CMD_ECHO
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 64
-
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
- + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
- /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
- GENERATED_GBL_DATA_SIZE)
-/* Platform/Board specific defs */
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+
+#include <asm/arch/omap.h>
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (48000000)
-#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
-4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
-
-/* CPU */
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_NS16550_CLK 48000000
+
+/* I2C Configuration */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+
+/* SPL defines. */
+#define CONFIG_SPL_TEXT_BASE 0x40300350
+#define CONFIG_SPL_MAX_SIZE (0x40337C00 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_YMODEM_SUPPORT
-#define CONFIG_ENV_IS_NOWHERE
+/* Enabling L2 Cache */
+#define CONFIG_SYS_L2_PL310
+#define CONFIG_SYS_PL310_BASE 0x48242000
+#define CONFIG_SYS_CACHELINE_SIZE 32
/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
+ * Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
*/
-#define CONFIG_SYS_TEXT_BASE 0x80800000
-
-#ifndef CONFIG_SPL_BUILD
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
-/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (101 * 1024)
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+/* Now bring in the rest of the common code. */
+#include <configs/ti_armv7_common.h>
-#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+/* Always 128 KiB env size */
+#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_YMODEM_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* Clock Defines */
+#define V_OSCK 24000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK)
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SYS_SPL_MALLOC_START 0x80a08000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_ENV_IS_NOWHERE
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
@@ -142,4 +79,67 @@
#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x80200000\0" \
+ "fdtaddr=0x80F80000\0" \
+ "fdt_high=0xffffffff\0" \
+ "rdaddr=0x81000000\0" \
+ "fdtfile=undefined\0" \
+ "bootpart=0:2\0" \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
+ "console=ttyO0,115200n8\0" \
+ "optargs=\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext4 rootwait\0" \
+ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+ "ramrootfstype=ext2\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "bootenv=uEnv.txt\0" \
+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t $loadaddr $filesize\0" \
+ "ramargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${ramroot} " \
+ "rootfstype=${ramrootfstype}\0" \
+ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "mmcboot=mmc dev ${mmcdev}; " \
+ "if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loadimage; then " \
+ "run loadfdt; " \
+ "echo Booting from mmc${mmcdev} ...; " \
+ "run mmcargs; " \
+ "bootz ${loadaddr} - ${fdtaddr}; " \
+ "fi;" \
+ "fi;\0" \
+ "findfdt="\
+ "if test $board_name = AM43EPOS; then " \
+ "setenv fdtfile am43x-epos-evm.dtb; fi; " \
+ "if test $board_name = AM43__GP; then " \
+ "setenv fdtfile am437x-gp-evm.dtb; fi; " \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree; fi; \0"
+
+#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+ "run mmcboot;"
+
+#endif
#endif /* __CONFIG_AM43XX_EVM_H */
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 3d29caf..7e367f3 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -118,6 +118,7 @@
#define CONFIG_USB_STORAGE
/* MMC SPL */
+#define CONFIG_EXYNOS_SPL
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index ea9a50e..f0a6757 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -44,7 +44,6 @@
#define LCD_BPP LCD_COLOR16
#define LCD_OUTPUT_BPP 24
#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
@@ -62,14 +61,15 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+/* no NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
@@ -101,9 +101,6 @@
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
-/* no NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
@@ -244,8 +241,4 @@
*/
#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
#endif
diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
index 8b2a6cf..b41a823 100644
--- a/include/configs/balloon3.h
+++ b/include/configs/balloon3.h
@@ -84,7 +84,7 @@
* Clock Configuration
*/
#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
/*
@@ -127,10 +127,10 @@
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_ENV_IS_IN_FLASH
#else
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index c1042ae..8182a75 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -236,6 +236,8 @@
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
#define CONFIG_SYS_NAND_ECCSIZE 0x200
#define CONFIG_SYS_NAND_ECCBYTES 10
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index d5db8f5..29a023c 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -81,7 +81,7 @@
"console=ttymxc1\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
- "fdt_addr=0x11000000\0" \
+ "fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"mmcdev=1\0" \
"mmcpart=1\0" \
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index e72187e..7729a02 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -27,8 +27,6 @@
#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
#define CONFIG_OMAP_COMMON
-#define CONFIG_SYS_TEXT_BASE 0x80008000
-
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -104,8 +102,6 @@
#define CONFIG_USB_OMAP3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_MUSB_UDC
#define CONFIG_TWL4030_USB
@@ -115,6 +111,8 @@
#define CONFIG_USB_DEVICE
#define CONFIG_USB_TTY
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+/* This delay is really for slow-to-power-on USB sticks, not the hub */
+#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 500
/* commands to include */
#include <config_cmd_default.h>
@@ -176,7 +174,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
- "console=ttyS2,115200n8\0" \
+ "console=ttyO2,115200n8\0" \
"mpurate=500\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16@60\0" \
@@ -190,7 +188,6 @@
"mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
@@ -198,7 +195,6 @@
"mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
@@ -214,6 +210,7 @@
"nand read ${loadaddr} 2a0000 400000; " \
"bootm ${loadaddr}\0" \
+#define CONFIG_CMD_BOOTZ
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
@@ -319,6 +316,7 @@
/* Display Configuration */
#define CONFIG_OMAP3_GPIO_2
+#define CONFIG_OMAP3_GPIO_5
#define CONFIG_VIDEO_OMAP3
#define LCD_BPP LCD_COLOR16
@@ -330,4 +328,67 @@
#define CONFIG_OMAP3_SPI
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_NAND_SIMPLE
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_OMAP3_ID_NAND
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+/*
+ * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
+ * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
+ */
+#define CONFIG_SYS_NAND_ECCPOS { 1, 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12 }
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+
+#define CONFIG_SPL_TEXT_BASE 0x40200800
+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+/*
+ * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
+ * older x-loader implementations. And move the BSS area so that it
+ * doesn't overlap with TEXT_BASE.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
new file mode 100644
index 0000000..414db42
--- /dev/null
+++ b/include/configs/exynos5-dt.h
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5 board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_COMMON
+#define CONFIG_ARCH_EARLY_INIT_R
+#define CONFIG_EXYNOS_SPL
+
+/* Enable fdt support for Exynos5250 */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* Allow tracing to be enabled */
+#define CONFIG_TRACE
+#define CONFIG_CMD_TRACE
+#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
+#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
+#define CONFIG_TRACE_EARLY
+#define CONFIG_TRACE_EARLY_ADDR 0x50000000
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+/* Enable ACE acceleration for SHA1 and SHA256 */
+#define CONFIG_EXYNOS_ACE_SHA
+#define CONFIG_SHA_HW_ACCEL
+
+/* input clock of PLL: SMDK5250 has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET 0x800
+#define INFORM1_OFFSET 0x804
+#define INFORM2_OFFSET 0x808
+#define INFORM3_OFFSET 0x80c
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
+
+/* select serial console configuration */
+#define CONFIG_BAUDRATE 115200
+#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+#define CONFIG_SILENT_CONSOLE
+
+/* Enable keyboard */
+#define CONFIG_CROS_EC /* CROS_EC protocol */
+#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
+#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
+#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */
+#define CONFIG_CMD_CROS_EC
+#define CONFIG_KEYBOARD
+
+/* Console configuration */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define EXYNOS_DEVICE_SETTINGS \
+ "stdin=serial,cros-ec-keyb\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ EXYNOS_DEVICE_SETTINGS
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* PWM */
+#define CONFIG_PWM
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_HASH
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* Thermal Management Unit */
+#define CONFIG_EXYNOS_TMU
+#define CONFIG_CMD_DTT
+#define CONFIG_TMU_CMD_DTT
+
+/* TPM */
+#define CONFIG_TPM
+#define CONFIG_CMD_TPM
+#define CONFIG_TPM_TIS_I2C
+#define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3
+#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
+
+/* MMC SPL */
+#define CONFIG_SPL
+#define COPY_BL2_FNPTR_ADDR 0x02020030
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+
+/* specific .lds file */
+#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
+
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_RD_LVL
+
+#define CONFIG_NR_DRAM_BANKS 8
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_SECURE_BL1_ONLY
+
+/* Secure FW size configuration */
+#ifdef CONFIG_SECURE_BL1_ONLY
+#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
+#else
+#define CONFIG_SEC_FW_SIZE 0
+#endif
+
+/* Configuration of BL1, BL2, ENV Blocks on mmc */
+#define CONFIG_RES_BLOCK_SIZE (512)
+#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+
+#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
+#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
+
+#define CONFIG_SPI_BOOTING
+#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
+#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
+/* I2C */
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
+#define CONFIG_I2C_EDID
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS 5
+#define CONFIG_OF_SPI
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS 1
+#define CONFIG_ENV_SPI_MAX_HZ 50000000
+#endif
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+
+/* Ethernet Controllor Driver */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE 0x5000000
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_ENV_SROM_BANK 1
+#endif /*CONFIG_CMD_NET*/
+
+/* Enable PXE Support */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#endif
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+/* SHA hashing */
+#define CONFIG_CMD_HASH
+#define CONFIG_HASH_VERIFY
+#define CONFIG_SHA1
+#define CONFIG_SHA256
+
+/* Enable Time Command */
+#define CONFIG_CMD_TIME
+
+#define CONFIG_CMD_BOOTZ
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index b39bafc..615df64 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -1,3 +1,4 @@
+
/*
* Copyright (C) 2012 Samsung Electronics
*
@@ -6,133 +7,19 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_5250_H
+#define __CONFIG_5250_H
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
+#include <configs/exynos5-dt.h>
#define CONFIG_EXYNOS5250
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Enable fdt support for Exynos5250 */
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
-
-/* Allow tracing to be enabled */
-#define CONFIG_TRACE
-#define CONFIG_CMD_TRACE
-#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
-#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
-#define CONFIG_TRACE_EARLY
-#define CONFIG_TRACE_EARLY_ADDR 0x50000000
-
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
-/* Enable ACE acceleration for SHA1 and SHA256 */
-#define CONFIG_EXYNOS_ACE_SHA
-#define CONFIG_SHA_HW_ACCEL
-
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x43E00000
-/* input clock of PLL: SMDK5250 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
/* MACH_TYPE_SMDK5250 macro will be removed once added to mach-types */
#define MACH_TYPE_SMDK5250 3774
#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5250
-/* Power Down Modes */
-#define S5P_CHECK_SLEEP 0x00000BAD
-#define S5P_CHECK_DIDLE 0xBAD00000
-#define S5P_CHECK_LPA 0xABAD0000
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET 0x800
-#define INFORM1_OFFSET 0x804
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
-
-/* select serial console configuration */
-#define CONFIG_BAUDRATE 115200
-#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
-#define CONFIG_SILENT_CONSOLE
-
-/* Enable keyboard */
-#define CONFIG_CROS_EC /* CROS_EC protocol */
-#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
-#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
-#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */
-#define CONFIG_CMD_CROS_EC
-#define CONFIG_KEYBOARD
-
-/* Console configuration */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define EXYNOS_DEVICE_SETTINGS \
- "stdin=serial,cros-ec-keyb\0" \
- "stdout=serial,lcd\0" \
- "stderr=serial,lcd\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- EXYNOS_DEVICE_SETTINGS
-
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
-#define CONFIG_DWMMC
-#define CONFIG_EXYNOS_DWMMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
-
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* PWM */
-#define CONFIG_PWM
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_HASH
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-/* Thermal Management Unit */
-#define CONFIG_EXYNOS_TMU
-#define CONFIG_CMD_DTT
-#define CONFIG_TMU_CMD_DTT
-
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_XHCI
@@ -146,168 +33,20 @@
#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
-/* TPM */
-#define CONFIG_TPM
-#define CONFIG_CMD_TPM
-#define CONFIG_TPM_TIS_I2C
-#define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3
-#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
-
-/* MMC SPL */
-#define CONFIG_SPL
-#define COPY_BL2_FNPTR_ADDR 0x02020030
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-
-/* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x02023400
-#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "SMDK5250 # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
-#define CONFIG_RD_LVL
-
-#define CONFIG_NR_DRAM_BANKS 8
-#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
-#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
-#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
#define CONFIG_IDENT_STRING " for SMDK5250"
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#define CONFIG_SECURE_BL1_ONLY
-
-/* Secure FW size configuration */
-#ifdef CONFIG_SECURE_BL1_ONLY
-#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
-#else
-#define CONFIG_SEC_FW_SIZE 0
-#endif
-
-/* Configuration of BL1, BL2, ENV Blocks on mmc */
-#define CONFIG_RES_BLOCK_SIZE (512)
-#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
-#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
-
-#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
-#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
-#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
-
-/* U-boot copy size from boot Media to DRAM.*/
-#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
-#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-
-#define CONFIG_SPI_BOOTING
-#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
-#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
-
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
-/* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
-#define CONFIG_I2C_EDID
-
/* PMIC */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
#define CONFIG_PMIC_MAX77686
-/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_ENV_SPI_BASE 0x12D30000
-
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED 50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS 5
-#define CONFIG_OF_SPI
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS 1
-#define CONFIG_ENV_SPI_MAX_HZ 50000000
-#endif
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX77686
-
-/* Ethernet Controllor Driver */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0x5000000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_ENV_SROM_BANK 1
-#endif /*CONFIG_CMD_NET*/
-
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
/* Sound */
#define CONFIG_CMD_SOUND
#ifdef CONFIG_CMD_SOUND
@@ -317,14 +56,8 @@
#define CONFIG_SOUND_WM8994
#endif
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
-/* SHA hashing */
-#define CONFIG_CMD_HASH
-#define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
+/* I2C */
+#define CONFIG_MAX_I2C_NUM 8
/* Display */
#define CONFIG_LCD
@@ -335,8 +68,4 @@
#define LCD_YRES 1600
#define LCD_BPP LCD_COLOR16
#endif
-
-/* Enable Time Command */
-#define CONFIG_CMD_TIME
-
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_5250_H */
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 7fa0c53..186fd35 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -28,6 +28,11 @@
#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210
/*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
* Compression configuration
*/
#define CONFIG_BZIP2
@@ -41,6 +46,7 @@
#define CONFIG_SYS_MVFS
#include <config_cmd_default.h>
#define CONFIG_CMD_ENV
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_IDE
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
@@ -66,7 +72,7 @@
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_OFFSET 0x80000
+#define CONFIG_ENV_OFFSET 0xe0000
/*
* Default environment variables
@@ -74,24 +80,26 @@
#define CONFIG_BOOTCOMMAND \
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
"ubi part root; " \
- "ubifsmount ubi:root; " \
+ "ubifsmount ubi:rootfs; " \
"ubifsload 0x800000 ${kernel}; " \
- "ubifsload 0x1100000 ${initrd}; " \
- "bootm 0x800000 0x1100000"
-
-#define CONFIG_MTDPARTS \
- "mtdparts=orion_nand:" \
- "0x80000@0x0(uboot)," \
- "0x20000@0x80000(uboot_env)," \
- "-@0xa0000(root)\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ubifsload 0x700000 ${fdt}; " \
+ "ubifsumount; " \
+ "fdt addr 0x700000; fdt resize; fdt chosen; " \
+ "bootz 0x800000 - 0x700000"
+
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:" \
+ "0xe0000@0x0(uboot)," \
+ "0x20000@0xe0000(uboot_env)," \
+ "-@0x100000(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts="CONFIG_MTDPARTS \
- "kernel=/boot/uImage\0" \
- "initrd=/boot/uInitrd\0" \
- "bootargs_root=ubi.mtd=2 root=ubi0:root rootfstype=ubifs\0"
+ "kernel=/boot/zImage\0" \
+ "fdt=/boot/ib62x0.dtb\0" \
+ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
/*
* Ethernet driver configuration
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 7b55695..ffb67c2 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -37,7 +37,6 @@
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET
#define CONFIG_MXC_UART
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index 0e6073c..74c7232 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -35,6 +35,16 @@
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
+/* KM_KIRKWOOD_128M16 */
+#elif defined(CONFIG_KM_KIRKWOOD_128M16)
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16"
+#define CONFIG_HOSTNAME km_kirkwood_128m16
+#undef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG \
+ $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
+#define CONFIG_KM_DISABLE_PCIE
+#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
+
/* KM_NUSA */
#elif defined(CONFIG_KM_NUSA)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h
index 59c4948..f8cca5b 100644
--- a/include/configs/koelsch.h
+++ b/include/configs/koelsch.h
@@ -18,13 +18,18 @@
#include <asm/arch/rmobile.h>
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_DFL
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_RUN
#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_FLASH
@@ -123,6 +128,20 @@
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
+/* SH Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 0x1
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
+
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 10000000
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
@@ -130,4 +149,22 @@
#define CONFIG_SYS_TMU_CLK_DIV 4
#define CONFIG_SYS_HZ 1000
+/* i2c */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
+#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000
+#define CONFIG_SYS_I2C_SH_SPEED0 400000
+#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000
+#define CONFIG_SYS_I2C_SH_SPEED1 400000
+#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+#define CONFIG_SYS_I2C_SH_SPEED2 400000
+#define CONFIG_SH_I2C_DATA_HIGH 4
+#define CONFIG_SH_I2C_DATA_LOW 5
+#define CONFIG_SH_I2C_CLOCK 10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
+
#endif /* __KOELSCH_H */
diff --git a/include/configs/lager.h b/include/configs/lager.h
index 7819edd..8932825 100644
--- a/include/configs/lager.h
+++ b/include/configs/lager.h
@@ -28,6 +28,11 @@
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_RUN
#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_FLASH
@@ -127,12 +132,42 @@
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_SYS_MONITOR_LEN)
+/* SH Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 0x1
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_RCAR
+#define CONFIG_SYS_RCAR_I2C0_BASE 0xE6508000
+#define CONFIG_SYS_RCAR_I2C0_SPEED 400000
+#define CONFIG_SYS_RCAR_I2C1_BASE 0xE6518000
+#define CONFIG_SYS_RCAR_I2C1_SPEED 400000
+#define CONFIG_SYS_RCAR_I2C2_BASE 0xE6530000
+#define CONFIG_SYS_RCAR_I2C2_SPEED 400000
+#define CONFIG_SYS_RCAR_I2C3_BASE 0xE6540000
+#define CONFIG_SYS_RCAR_I2C3_SPEED 400000
+#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
+
/* Board Clock */
#define CONFIG_BASE_CLK_FREQ 20000000u
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_BASE_CLK_FREQ / 2) /* EXT / 2 */
#define CONFIG_PLL1_CLK_FREQ (CONFIG_BASE_CLK_FREQ * 156 / 2)
#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
+#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12)
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_MP_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 379c786..a269372 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -20,18 +20,18 @@
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
- "bootm 80000;"
+ "bootm 80000 - 240000;"
#define CONFIG_BOOTARGS \
- "console=ttySA0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
- "init=/sbin/init rootfstype=ext3"
+ "console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
+ "init=/sbin/init rootfstype=ext4 rootwait"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
-#undef CONFIG_OF_LIBFDT
+#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
@@ -100,7 +100,7 @@
*/
#define CONFIG_SYS_HUSH_PARSER 1
-#undef CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "$ "
#else
@@ -143,7 +143,7 @@
#define CONFIG_ENV_SECT_SIZE 0x40000
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
+#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
@@ -183,7 +183,7 @@
#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x55f0a402
+#define CONFIG_SYS_GAFR2_U_VAL 0x55f9a402
#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c
#define CONFIG_SYS_GAFR3_U_VAL 0x00001599
@@ -231,7 +231,6 @@
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_BOARD_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index 8c54549..a344af4 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -37,6 +37,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_SATA
#define CONFIG_CMD_USB
+#define CONFIG_VIDEO
/*
* Memory configurations
@@ -201,6 +202,21 @@
#endif
/*
+ * LCD
+ */
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 200000000
+#endif
+
+/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index a64bafe..af6aafa 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -68,7 +68,6 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
/* U-Boot general configuration */
-#define CONFIG_SYS_PROMPT "MX25PDK U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print buffer sz */
@@ -116,7 +115,6 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
/* RTC */
#define CONFIG_RTC_IMXDI
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 07f88ca..4fd67eb 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -14,7 +14,6 @@
/* System configurations */
#define CONFIG_MX28 /* i.MX28 SoC */
#define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK
-#define CONFIG_SYS_PROMPT "MX28EVK U-Boot > "
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
@@ -97,7 +96,7 @@
"512k(environment)," \
"512k(redundant-environment)," \
"4m(kernel)," \
- "128k(fdt)," \
+ "512k(fdt)," \
"8m(ramdisk)," \
"-(filesystem)"
#endif
@@ -161,9 +160,9 @@
/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ubifs_file=filesystem.ubifs\0" \
"update_nand_full_filename=u-boot.nand\0" \
"update_nand_firmware_filename=u-boot.sb\0" \
- "update_sd_firmware_filename=u-boot.sd\0" \
"update_nand_firmware_maxsz=0x100000\0" \
"update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
"update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
@@ -172,7 +171,7 @@
"nand info ; " \
"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
- "update_nand_full=" /* Update FCB, DBBT and FW */ \
+ "update_nand_firmware_full=" /* Update FCB, DBBT and FW */ \
"if tftp ${update_nand_full_filename} ; then " \
"run update_nand_get_fcb_size ; " \
"nand scrub -y 0x0 ${filesize} ; " \
@@ -191,6 +190,55 @@
"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
"fi\0" \
+ "update_nand_kernel=" /* Update kernel */ \
+ "mtdparts default; " \
+ "nand erase.part kernel; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "nand write ${loadaddr} kernel ${filesize}\0" \
+ "update_nand_fdt=" /* Update fdt */ \
+ "mtdparts default; " \
+ "nand erase.part fdt; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${fdt_file}; " \
+ "nand write ${loadaddr} fdt ${filesize}\0" \
+ "update_nand_filesystem=" /* Update filesystem */ \
+ "mtdparts default; " \
+ "nand erase.part filesystem; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${ubifs_file}; " \
+ "ubi part filesystem; " \
+ "ubi create filesystem; " \
+ "ubi write ${loadaddr} filesystem ${filesize}\0" \
+ "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \
+ "rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \
+ "nandboot=" /* Boot from NAND */ \
+ "mtdparts default; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} kernel 0x00400000; " \
+ "if test ${boot_fdt} = yes; then " \
+ "nand read ${fdt_addr} fdt 0x00080000; " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = no; then " \
+ "bootm; " \
+ "else " \
+ "echo \"ERROR: Set boot_fdt to yes or no.\"; " \
+ "fi; " \
+ "fi\0" \
+ "update_sd_firmware_filename=u-boot.sd\0" \
"update_sd_firmware=" /* Update the SD firmware partition */ \
"if mmc rescan ; then " \
"if tftp ${update_sd_firmware_filename} ; then " \
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 8a11461..f223788 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -120,7 +120,6 @@
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "MX31PDK U-Boot > "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 0fb8320..0a46f4c 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -42,7 +42,6 @@
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO
@@ -135,7 +134,6 @@
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "MX35 U-Boot > "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 10c7ee9..1cff171 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -219,7 +219,6 @@
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "MX51EVK U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 60c40c8..797a637 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -46,7 +46,6 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
/* MMC Configs */
#define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 623bf97..3f0d80a 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -39,7 +39,6 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
/* PMIC Configs */
#define CONFIG_POWER
@@ -135,7 +134,6 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "MX53EVK U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index ab55fbe..ae43ea3 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -73,7 +73,6 @@
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
/* PMIC Controller */
#define CONFIG_POWER
@@ -177,7 +176,6 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "MX53LOCO U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 818d7e7..a04e7c7 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -36,7 +36,6 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
/* MMC Configs */
#define CONFIG_FSL_ESDHC
@@ -120,7 +119,6 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "MX53SMD U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 674bcd3..514d634 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -20,5 +20,6 @@
#define CONFIG_ARM_ERRATA_742230
#define CONFIG_ARM_ERRATA_743622
#define CONFIG_ARM_ERRATA_751472
+#define CONFIG_BOARD_POSTCLK_INIT
#endif
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 2f91a6c..f0a82d1 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -114,7 +114,6 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "MX6QARM2 U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index f97a37c..21c848f 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -18,6 +18,7 @@
#define CONFIG_DISPLAY_BOARDINFO
#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
@@ -33,6 +34,11 @@
#define CONFIG_MXC_UART
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
@@ -60,6 +66,17 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 9) << 8))
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#endif
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
@@ -82,7 +99,7 @@
"script=boot.scr\0" \
"uimage=uImage\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "fdt_addr=0x11000000\0" \
+ "fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"console=" CONFIG_CONSOLE_DEV "\0" \
@@ -171,7 +188,6 @@
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_PROMPT "U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 3df8de0..f4ff5cd 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -10,6 +10,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include "mx6_common.h"
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -62,16 +63,6 @@
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
-/* OCOTP Configs */
-#define CONFIG_CMD_IMXOTP
-#ifdef CONFIG_CMD_IMXOTP
-#define CONFIG_IMX_OTP
-#define IMX_OTP_BASE OCOTP_BASE_ADDR
-#define IMX_OTP_ADDR_MAX 0x7F
-#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA
-#define IMX_OTPWRITE_ENABLED
-#endif
-
/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
@@ -189,7 +180,7 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=imx6q-sabrelite.dtb\0" \
- "fdt_addr=0x11000000\0" \
+ "fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"mmcdev=0\0" \
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 3acb854..1b566c0 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -123,6 +123,9 @@
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_ASIX
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
+#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
/* commands to include */
#include <config_cmd_default.h>
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
deleted file mode 100644
index f749740..0000000
--- a/include/configs/omap3_zoom2.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * (C) Copyright 2006-2009
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- * Nishanth Menon <nm@ti.com>
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Configuration settings for the TI OMAP3430 Zoom II board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP34XX 1 /* which is a 34XX */
-#define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_SDRC /* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#define CONFIG_OF_LIBFDT 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
- /* Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- * Zoom2 uses the TL16CP754C on the debug board
- */
-/*
- * 0 - 1 : first USB with respect to the left edge of the debug board
- * 2 - 3 : second USB with respect to the left edge of the debug board
- */
-#define ZOOM2_DEFAULT_SERIAL_DEVICE 0
-
-#define V_NS16550_CLK (1843200) /* 1.8432 Mhz */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_REG_SIZE (-2)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200}
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_GENERIC_MMC 1
-#define CONFIG_MMC 1
-#define CONFIG_OMAP_HSMMC 1
-#define CONFIG_DOS_PARTITION 1
-
-/* Status LED */
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED 1
-#define STATUS_LED_BLUE 0
-#define STATUS_LED_RED 1
-/* Blue */
-#define STATUS_LED_BIT STATUS_LED_BLUE
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1 STATUS_LED_RED
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT STATUS_LED_BIT
-
-/* GPIO banks */
-#ifdef CONFIG_STATUS_LED
-#define CONFIG_OMAP3_GPIO_2 /* ZOOM2_LED_BLUE2 */
-#define CONFIG_OMAP3_GPIO_6 /* ZOOM2_LED_RED */
-#endif
-#define CONFIG_OMAP3_GPIO_3 /* board revision */
-#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */
-
-/* USB */
-#define CONFIG_MUSB_UDC 1
-#define CONFIG_USB_OMAP3 1
-#define CONFIG_TWL4030_USB 1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID 0x0451
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME "Zoom2"
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_I2C /* I2C serial bus support */
-#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_NAND /* NAND support */
-#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
-
-#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMI /* iminfo */
-#undef CONFIG_CMD_IMLS /* List all found images */
-#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
-#undef CONFIG_CMD_NFS /* NFS support */
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER 1
-#define CONFIG_TWL4030_LED 1
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
- /* to access nand */
-#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
- /* to access nand at */
- /* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-/* Environment information */
-#define CONFIG_BOOTDELAY 10
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "usbtty=cdc_acm\0" \
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_PROMPT "OMAP3 Zoom2 # "
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 512
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-/* Memtest from start of memory to 31MB */
-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)
-/* The default load address is the start of memory */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
-/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */
-#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_IS_IN_NAND 1
-#define SMNAND_ENV_OFFSET 0x0c0000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index ea56eeb..d099bfd 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -148,9 +148,14 @@
"fi; " \
"fi"
-/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40304350
-#define CONFIG_SPL_MAX_SIZE (38 * 1024)
+/*
+ * Defines for SPL
+ * It is known that this will break HS devices. Since the current size of
+ * SPL is overlapped with public stack and breaking non HS devices to boot.
+ * So moving TEXT_BASE down to non-HS limit.
+ */
+#define CONFIG_SPL_TEXT_BASE 0x40300000
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_DISPLAY_PRINT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index ae4dd75..2a9fd22 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -115,7 +115,7 @@
* Clock Configuration
*/
#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */
/*
@@ -158,10 +158,10 @@
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_LOCK_TOUT (25*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (25*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_ENV_IS_IN_FLASH 1
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 1f94f0c..de25407 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -117,7 +117,7 @@
* Clock Configuration
*/
#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 3686400 /* Timer @ 3686400 Hz */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x161 /* 400MHz;L=1 M=3 T=1 */
/*
@@ -155,10 +155,10 @@
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_ENV_IS_IN_FLASH 1
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index a09310c..c0048ac 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -69,7 +69,7 @@
#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
#define CONFIG_SYS_MEMTEST_END 0x08F00000
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
#define CONFIG_BAUDRATE 115200
@@ -143,8 +143,8 @@
now.*/
#undef CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* timeout for Erase operation */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 /* timeout for Write operation */
#define CONFIG_SYS_FLASH_BASE SCB9328_FLASH_BASE
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 4569fd4..2863042 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -401,7 +401,7 @@
"dfu_args=run bootargs_defaults;" \
"setenv bootargs ${bootargs} ;" \
"mtdparts default; " \
- "dfu nand 0; \0" \
+ "dfu 0 nand 0; \0" \
"dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \
"net_args=run bootargs_defaults;" \
"mtdparts default;" \
diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h
new file mode 100644
index 0000000..447f8e5
--- /dev/null
+++ b/include/configs/smdk5420.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5420 board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_5420_H
+#define __CONFIG_5420_H
+
+#include <configs/exynos5-dt.h>
+
+#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */
+#define CONFIG_SMDK5420 /* which is in a SMDK5420 */
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420
+
+#define CONFIG_ARCH_DEVICE_TREE exynos5420
+
+#define CONFIG_VAR_SIZE_SPL
+
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_TEXT_BASE 0x23E00000
+
+#define CONFIG_BOARD_REV_GPIO_COUNT 2
+
+/* MACH_TYPE_SMDK5420 macro will be removed once added to mach-types */
+#define MACH_TYPE_SMDK5420 8002 /* Temporary number */
+#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420
+
+/* select serial console configuration */
+#define CONFIG_SERIAL3 /* use SERIAL 3 */
+
+#ifdef CONFIG_VAR_SIZE_SPL
+#define CONFIG_SPL_TEXT_BASE 0x02024410
+#else
+#define CONFIG_SPL_TEXT_BASE 0x02024400
+#endif
+
+#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000"
+
+#define CONFIG_SYS_PROMPT "SMDK5420 # "
+#define CONFIG_IDENT_STRING " for SMDK5420"
+
+#define CONFIG_IRAM_TOP 0x02074000
+/*
+ * Put the initial stack pointer 1KB below this to allow room for the
+ * SPL marker. This value is arbitrary, but gd_t is placed starting here.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800)
+
+#define CONFIG_MAX_I2C_NUM 11
+
+#endif /* __CONFIG_5420_H */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 439fc47..d44b5c0 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -224,6 +224,7 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_CONSOLE
#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
new file mode 100644
index 0000000..9abfe82
--- /dev/null
+++ b/include/configs/tao3530.h
@@ -0,0 +1,363 @@
+/*
+ * Configuration settings for the TechNexion TAO-3530 SOM
+ * equipped on Thunder baseboard.
+ *
+ * Edward Lin <linuxfae@technexion.com>
+ * Tapani Utriainen <linuxfae@technexion.com>
+ *
+ * Copyright (C) 2013 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_OMAP34XX /* which is a 34XX */
+
+#define CONFIG_OMAP_GPIO
+#define CONFIG_OMAP_COMMON
+
+#define MACH_TYPE_OMAP3_TAO3530 2836
+
+#define CONFIG_SDRC /* Has an SDRC controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (4 << 20)
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
+ "1920k(u-boot),128k(u-boot-env),"\
+ "4m(kernel),-(fs)"
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_OMAP34XX
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_I2C_MULTI_BUS
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER
+#define CONFIG_TWL4030_LED
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
+ /* to access nand */
+#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
+ /* to access nand at */
+ /* CS0 */
+#define GPMC_NAND_ECC_LP_x16_LAYOUT
+
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
+ /* devices */
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "console=ttyO2,115200n8\0" \
+ "mpurate=600\0" \
+ "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
+ "tv_mode=omapfb.mode=tv:ntsc\0" \
+ "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
+ "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
+ "extra_options= \0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "nandroot=ubi0:rootfs ubi.mtd=4\0" \
+ "nandrootfstype=ubifs\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "${video_mode} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype} " \
+ "${extra_options}\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "${video_mode} " \
+ "${network_setting} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype} "\
+ "${extra_options}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} 280000 400000; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc rescan ${mmcdev}; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "TAO-3530 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* turn on command-line edit/hist/auto */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_AUTO_COMPLETE
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_ALT_MEMTEST 1
+#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */
+ /* defaults */
+#define CONFIG_SYS_MEMTEST_END (0x83FFFFFF) /* 64MB */
+#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
+ /* load address */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
+#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
+
+/*
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
+
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_NAND 1
+#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10)
+#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_OMAP3_SPI
+
+/*
+ * USB
+ *
+ * Currently only EHCI is enabled, the MUSB OTG controller
+ * is not enabled.
+ */
+
+/* USB EHCI */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162
+
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETHER_RNDIS
+#define CONFIG_USB_STORAGE
+#define CONGIG_CMD_STORAGE
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_NAND_SIMPLE
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_OMAP3_ID_NAND
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+/*
+ * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
+ * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
+ */
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13 }
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+
+#define CONFIG_SPL_TEXT_BASE 0x40200800
+#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+/*
+ * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
+ * older x-loader implementations. And move the BSS area so that it
+ * doesn't overlap with TEXT_BASE.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h
new file mode 100644
index 0000000..13baa76
--- /dev/null
+++ b/include/configs/tec-ng.h
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra30-common.h"
+
+/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra30-tec-ng
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra30 (TEC-NG) # "
+#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+
+/* SPI */
+#define CONFIG_TEGRA20_SLINK
+#define CONFIG_TEGRA_SLINK_CTRLS 6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+/* Tag support */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+/* support the new (FDT-based) image format */
+#define CONFIG_FIT
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index c3de9a9..a4e8a5f 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -82,5 +82,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
#endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index 99acbfd..b5550d7 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -79,5 +79,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
#endif /* _TEGRA30_COMMON_H_ */
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index 0bb6731..f9e00c5 100644
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -13,6 +13,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 5d86a3d..c9ce828 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -160,6 +160,7 @@
#define PARTS_UMS "ums"
#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
"name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
"name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \
@@ -201,7 +202,7 @@
"${kernelname}\0" \
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
- "mmcdev=CONFIG_MMC_DEFAULT_DEV\0" \
+ "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"opts=always_resume=1\0" \
diff --git a/include/configs/twister.h b/include/configs/twister.h
index b6ca59c..f24dc13 100644
--- a/include/configs/twister.h
+++ b/include/configs/twister.h
@@ -50,4 +50,7 @@
#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_SPL_BOARD_INIT
+/* gpio 55 is used as SPL_OS_BOOT_KEY */
+#define CONFIG_OMAP3_GPIO_2
+
#endif /* __CONFIG_H */
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 78df071..614e1fe 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -9,6 +9,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
#include <asm/sizes.h>
@@ -34,6 +35,34 @@
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
+/* SATA Configs */
+
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+/* Network support */
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 6
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
@@ -77,7 +106,7 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "fdt_addr=0x11000000\0" \
+ "fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"mmcdev=0\0" \
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000..ce5f384
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,189 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+#define CONFIG_REMAKE_ELF
+
+/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
+
+/*#define CONFIG_SYS_GENERIC_BOARD*/
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING " vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE 0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE vexpress64
+
+/* SMP Spin Table Definitions */
+#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0 0x00000000
+#define V2M_PA_CS1 0x14000000
+#define V2M_PA_CS2 0x18000000
+#define V2M_PA_CS3 0x1c000000
+#define V2M_PA_CS4 0x0c000000
+#define V2M_PA_CS5 0x10000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE 0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0 (V2M_PA_CS0)
+#define V2M_NOR1 (V2M_PA_CS4)
+#define V2M_SRAM (V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE (0x2C001000)
+#define GICC_BASE (0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START V2M_BASE
+#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_SMC9111 1
+#define CONFIG_SMC9111_BASE (0x1a000000)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX 0
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0 V2M_UART0
+#define CONFIG_SYS_SERIAL1 V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+/*#define CONFIG_MENU_SHOW*/
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr=0x200000\0" \
+ "initrd_addr=0xa00000\0" \
+ "initrd_size=0x2000000\0" \
+ "fdt_addr=0x100000\0" \
+ "fdt_high=0xa0000000\0"
+
+#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND "bootm $kernel_addr " \
+ "$initrd_addr:$initrd_size $fdt_addr"
+#define CONFIG_BOOTDELAY -1
+
+/* Do not preserve environment */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "VExpress64# "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index e9c7e64..ae8480d 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -9,6 +9,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
#include <asm/sizes.h>
@@ -113,7 +114,7 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "fdt_addr=0x11000000\0" \
+ "fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index f9ccca7..e38fa89 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -138,7 +138,7 @@ unsigned char zipitz2_spi_read(void);
* Clock Configuration
*/
#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
/*
@@ -185,10 +185,10 @@ unsigned char zipitz2_spi_read(void);
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
#define CONFIG_SYS_FLASH_PROTECTION
/*
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
new file mode 100644
index 0000000..e7a8e9f
--- /dev/null
+++ b/include/configs/zynq-common.h
@@ -0,0 +1,238 @@
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Common configuration options for all Zynq boards.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_COMMON_H
+#define __CONFIG_ZYNQ_COMMON_H
+
+/* High Level configuration Options */
+#define CONFIG_ARMV7
+#define CONFIG_ZYNQ
+
+/* CPU clock */
+#ifndef CONFIG_CPU_FREQ_HZ
+# define CONFIG_CPU_FREQ_HZ 800000000
+#endif
+
+/* Cache options */
+#define CONFIG_CMD_CACHE
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+#define CONFIG_SYS_L2CACHE_OFF
+#ifndef CONFIG_SYS_L2CACHE_OFF
+# define CONFIG_SYS_L2_PL310
+# define CONFIG_SYS_PL310_BASE 0xf8f02000
+#endif
+
+/* Serial drivers */
+#define CONFIG_BAUDRATE 115200
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/* Zynq Serial driver */
+#ifdef CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
+#endif
+
+#ifdef CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000
+#endif
+
+#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
+# define CONFIG_ZYNQ_SERIAL
+#endif
+
+/* DCC driver */
+#if defined(CONFIG_ZYNQ_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#endif
+
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
+# define CONFIG_NET_MULTI
+# define CONFIG_ZYNQ_GEM
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MARVELL
+#endif
+
+/* SPI */
+#ifdef CONFIG_ZYNQ_SPI
+# define CONFIG_SPI_FLASH
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_CMD_SF
+#endif
+
+/* NOR */
+#ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_SYS_FLASH_BASE 0xE2000000
+# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+# define CONFIG_SYS_MAX_FLASH_SECT 512
+# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
+# define CONFIG_FLASH_SHOW_PROGRESS 10
+# define CONFIG_SYS_FLASH_CFI
+# undef CONFIG_SYS_FLASH_EMPTY_INFO
+# define CONFIG_FLASH_CFI_DRIVER
+# undef CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+/* MMC */
+#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_MMC
+# define CONFIG_GENERIC_MMC
+# define CONFIG_SDHCI
+# define CONFIG_ZYNQ_SDHCI
+# define CONFIG_CMD_MMC
+# define CONFIG_CMD_FAT
+# define CONFIG_SUPPORT_VFAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_DOS_PARTITION
+#endif
+
+/* I2C */
+#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
+# define CONFIG_CMD_I2C
+# define CONFIG_SYS_I2C
+# define CONFIG_SYS_I2C_ZYNQ
+# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
+# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
+#endif
+
+/* EEPROM */
+#ifdef CONFIG_ZYNQ_EEPROM
+# define CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
+#endif
+
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE (128 << 10)
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Environment */
+#ifndef CONFIG_ENV_IS_NOWHERE
+# ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_ENV_IS_IN_FLASH
+# elif defined(CONFIG_SYS_NO_FLASH)
+# define CONFIG_ENV_IS_NOWHERE
+# endif
+
+# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+# define CONFIG_ENV_OFFSET 0xE0000
+# define CONFIG_CMD_SAVEENV
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fit_image=fit.itb\0" \
+ "load_addr=0x2000000\0" \
+ "fit_size=0x800000\0" \
+ "flash_off=0x100000\0" \
+ "nor_flash_off=0xE2100000\0" \
+ "fdt_high=0x20000000\0" \
+ "initrd_high=0x20000000\0" \
+ "norboot=echo Copying FIT from NOR flash to RAM... && " \
+ "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
+ "bootm ${load_addr}\0" \
+ "sdboot=echo Copying FIT from SD to RAM... && " \
+ "fatload mmc 0 ${load_addr} ${fit_image} && " \
+ "bootm ${load_addr}\0" \
+ "jtagboot=echo TFTPing FIT to RAM... && " \
+ "tftp ${load_addr} ${fit_image} && " \
+ "bootm ${load_addr}\0"
+#define CONFIG_BOOTCOMMAND "run $modeboot"
+#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
+#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_PROMPT "zynq-uboot> "
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Physical Memory map */
+#define CONFIG_SYS_TEXT_BASE 0x4000000
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
+
+#define CONFIG_SYS_MALLOC_LEN 0x400000
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Enable the PL to be downloaded */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_ZYNQPL
+#define CONFIG_CMD_FPGA
+
+/* Open Firmware flat tree */
+#define CONFIG_OF_LIBFDT
+
+/* FIT support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+
+/* FDT support */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* RSA support */
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
+/* Boot FreeBSD/vxWorks from an ELF image */
+#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
+# define CONFIG_API
+# define CONFIG_CMD_ELF
+# define CONFIG_SYS_MMC_MAX_DEVICE 1
+#endif
+
+/* Commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+
+#endif /* __CONFIG_ZYNQ_COMMON_H */
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
deleted file mode 100644
index 82ec826..0000000
--- a/include/configs/zynq.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_ZYNQ_H
-#define __CONFIG_ZYNQ_H
-
-#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
-#define CONFIG_ZYNQ
-
-/* CPU clock */
-#define CONFIG_CPU_FREQ_HZ 800000000
-
-/* Ram */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_TEXT_BASE 0
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_SDRAM_SIZE 0x40000000
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#define CONFIG_BAUDRATE 115200
-
-/* XPSS Serial driver */
-#define CONFIG_ZYNQ_SERIAL
-#define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0001000
-#define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
-#define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
-
-/* Ethernet driver */
-#define CONFIG_NET_MULTI
-#define CONFIG_ZYNQ_GEM
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
-
-#define CONFIG_ZYNQ_SDHCI
-#define CONFIG_ZYNQ_SDHCI0
-
-/* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
-# define CONFIG_MMC
-# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
-# define CONFIG_CMD_MMC
-# define CONFIG_CMD_FAT
-# define CONFIG_SUPPORT_VFAT
-# define CONFIG_CMD_EXT2
-# define CONFIG_DOS_PARTITION
-#endif
-
-#define CONFIG_ZYNQ_I2C0
-
-/* I2C */
-#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
-# define CONFIG_CMD_I2C
-# define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ
-# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
-#endif
-
-#if defined(CONFIG_ZYNQ_DCC)
-# define CONFIG_ARM_DCC
-# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
-#endif
-
-#define CONFIG_ZYNQ_SPI
-
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
-# define CONFIG_SPI_FLASH_SST
-# define CONFIG_CMD_SF
-#endif
-
-/* Enable the PL to be downloaded */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
-
-#define CONFIG_BOOTP_SERVERIP
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_MAY_FAIL
-
-/* MII and Phylib */
-#define CONFIG_MII
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MARVELL
-
-/* Environment */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x10000
-
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_SYS_MALLOC_LEN 0x400000
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_LOAD_ADDR 0
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/* OF */
-#define CONFIG_FIT
-#define CONFIG_OF_LIBFDT
-
-/* Commands */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#endif /* __CONFIG_ZYNQ_H */
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
new file mode 100644
index 0000000..b0328a2
--- /dev/null
+++ b/include/configs/zynq_microzed.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Micro Zynq Evaluation and Development Board - MicroZedBoard
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_MICROZED_H
+#define __CONFIG_ZYNQ_MICROZED_H
+
+#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_DEFAULT_DEVICE_TREE zynq-microzed
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_MICROZED_H */
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
new file mode 100644
index 0000000..673660e
--- /dev/null
+++ b/include/configs/zynq_zc70x.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC70X_H
+#define __CONFIG_ZYNQ_ZC70X_H
+
+#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_EEPROM
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE zynq-zc702
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC70X_H */
diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
new file mode 100644
index 0000000..8aa96e7
--- /dev/null
+++ b/include/configs/zynq_zc770.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC770 board.
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC770_H
+#define __CONFIG_ZYNQ_ZC770_H
+
+#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_SYS_NO_FLASH
+
+#if defined(CONFIG_ZC770_XM010)
+# define CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_GEM0
+# define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+# define CONFIG_ZYNQ_SDHCI0
+# define CONFIG_ZYNQ_SPI
+# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm010
+
+#elif defined(CONFIG_ZC770_XM012)
+# define CONFIG_ZYNQ_SERIAL_UART1
+# undef CONFIG_SYS_NO_FLASH
+# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm012
+
+#elif defined(CONFIG_ZC770_XM013)
+# define CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_GEM1
+# define CONFIG_ZYNQ_GEM_PHY_ADDR1 7
+# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm013
+
+#else
+# define CONFIG_ZYNQ_SERIAL_UART0
+#endif
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC770_H */
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
new file mode 100644
index 0000000..412dede
--- /dev/null
+++ b/include/configs/zynq_zed.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Zynq Evaluation and Development Board - ZedBoard
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZED_H
+#define __CONFIG_ZYNQ_ZED_H
+
+#define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE zynq-zed
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZED_H */