diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/DK1C20.h | 47 | ||||
| -rw-r--r-- | include/configs/DK1S10.h | 40 | ||||
| -rw-r--r-- | include/configs/MIP405.h | 53 | ||||
| -rw-r--r-- | include/configs/TOP5200.h | 14 | ||||
| -rw-r--r-- | include/configs/omap1610h2.h | 178 | ||||
| -rw-r--r-- | include/configs/omap1610inn.h | 7 |
6 files changed, 323 insertions, 16 deletions
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index 2d77dd7..9b4f144 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -146,17 +146,60 @@ #if (CFG_NIOS_CPU_TICK_TIMER == 0) -#error *** CFG_ERROR: tick timer at TIMER0 not supported, expand your config.h +#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */ +#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ + +#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ + +#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ) +#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ) +#else +#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#endif + +#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ + +#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */ + +#if (CFG_HZ <= 1000) +#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#else +#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#endif + +#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) + +#else +#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct +#endif #elif (CFG_NIOS_CPU_TICK_TIMER == 1) #define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */ #define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ +#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ + #if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ) #define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ) #else -#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ +#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#endif + +#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ + +#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */ + +#if (CFG_HZ <= 1000) +#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#else +#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#endif + +#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) + +#else +#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct #endif #endif /* CFG_NIOS_CPU_TICK_TIMER */ diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 835c7a2..e5e487c 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -168,10 +168,28 @@ #define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */ #define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ +#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ + #if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ) #define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ) #else -#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ +#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#endif + +#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ + +#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */ + +#if (CFG_HZ <= 1000) +#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#else +#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#endif + +#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) + +#else +#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct #endif #elif (CFG_NIOS_CPU_TICK_TIMER == 1) @@ -179,10 +197,28 @@ #define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */ #define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ +#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ + #if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ) #define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ) #else -#error *** CFG_ERROR: you have to use a timer periode of more than CFG_HZ +#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#endif + +#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ + +#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */ + +#if (CFG_HZ <= 1000) +#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#else +#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#endif + +#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) + +#else +#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct #endif #endif /* CFG_NIOS_CPU_TICK_TIMER */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index cfe74e1..39419d0 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -55,20 +55,21 @@ ***********************************************************/ #define MIP405_COMMON_CMDS \ (CONFIG_CMD_DFL | \ - CFG_CMD_IDE | \ - CFG_CMD_DHCP | \ CFG_CMD_CACHE | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO | \ - CFG_CMD_DATE | \ CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + CFG_CMD_IRQ | \ + CFG_CMD_JFFS2 | \ CFG_CMD_MII | \ - CFG_CMD_FAT | \ + CFG_CMD_PCI | \ CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ CFG_CMD_SAVES | \ CFG_CMD_BSP ) @@ -235,6 +236,9 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ +#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ + /*----------------------------------------------------------------------- * Cache Configuration */ @@ -244,6 +248,25 @@ #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif +/*----------------------------------------------------------------------- + * Logbuffer Configuration + */ +#undef CONFIG_LOGBUFFER /* supported but not enabled */ +/*----------------------------------------------------------------------- + * Bootcountlimit Configuration + */ +#undef CONFIG_BOOTCOUNT_LIMIT /* supported but not enabled */ + +/*----------------------------------------------------------------------- + * POST Configuration + */ +#if 0 /* enable this if POST is desired (is supported but not enabled) */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_RTC | \ + CFG_POST_I2C) + +#endif /* * Init Memory Controller: */ @@ -273,7 +296,16 @@ #define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +/* reserve some memory for POST and BOOT limit info */ +#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 32) + +#ifdef CONFIG_POST /* reserve one word for POST Info */ +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4) +#endif + +#ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */ +#define CFG_BOOTCOUNT_ADDR (CFG_GBL_DATA_OFFSET - 12) +#endif /* * Internal Definitions @@ -298,7 +330,8 @@ ***********************************************************/ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ - +#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */ +#define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */ /************************************************************ * RTC ***********************************************************/ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 8ff264b..bdb7a46 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -314,7 +314,19 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_RTC_MPC5200 1 /* use 5200 RTC */ +#ifdef CONFIG_EVAL5200 /* M48T08 is available with the Evaluation board only */ + #define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */ + #define RTC(reg) (0xf0010000+reg) + /* setup CS2 for M48T08. Must MAP 64kB */ + #define CFG_CS2_START RTC(0) + #define CFG_CS2_SIZE 0x10000 + /* setup CS2 configuration register: */ + /* WaitP = 0, WaitX = 4, MX=0, AL=1, AA=1, CE=1 */ + /* AS=2, DS=0, Bank=0, WTyp=0, WS=0, RS=0, WO=0, RO=0 */ + #define CFG_CS2_CFG 0x00047800 +#else + #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ +#endif /* * Various low-level settings diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h new file mode 100644 index 0000000..2eb65e2 --- /dev/null +++ b/include/configs/omap1610h2.h @@ -0,0 +1,178 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Kshitij Gupta <kshitij@ti.com> + * Configuration settings for the TI OMAP 1610 H2 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP1610 1 /* which is in a 1610 */ +#define CONFIG_H2_OMAP1610 1 /* on an H2 Board */ + +/* input clock of PLL */ +/* the OMAP1610 H2 has 12MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 12000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE 0x04000300 +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1610 H2 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> +#include <configs/omap1510.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \ + root=/dev/nfs rw nfsroot=157.87.82.48:\ + /home/a0875451/mwd/myfs/target ip=dhcp" +#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */ +#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */ +#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ +#define CONFIG_BOOTFILE "uImage" /* file to load */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "OMAP1610 H2 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x10000000 /* default load address */ + +/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by + * DPLL1. This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#ifdef CONFIG_CS0_BOOT +#define PHYS_FLASH_1 0x0C000000 +#endif +#ifdef CONFIG_CS3_BOOT +#define PHYS_FLASH_1 0x00000000 +#endif + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ +/* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x20000 /* environment starts here */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index 9bdd795..da8043d 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -151,7 +151,12 @@ #define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#ifdef CONFIG_CS0_BOOT +#define PHYS_FLASH_1 0x0C000000 +#endif +#ifdef CONFIG_CS3_BOOT +#define PHYS_FLASH_1 0x00000000 +#endif #define CFG_FLASH_BASE PHYS_FLASH_1 |