diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/xupv2p.h | 57 |
1 files changed, 51 insertions, 6 deletions
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index b4c720d..25fa495 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -31,13 +31,33 @@ #define CONFIG_XUPV2P 1 /* uart */ -#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR -#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE +#ifdef XILINX_UARTLITE_BASEADDR +#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR +#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#else +#ifdef XILINX_UART16550_BASEADDR +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR +#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 115200 } +#endif +#endif /* ethernet */ -#define CONFIG_EMAC 1 -#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES +#ifdef XILINX_EMAC_BASEADDR +#define XILINX_EMAC 1 +#else +#ifdef XILINX_EMACLITE_BASEADDR +#define XILINX_EMACLITE 1 +#endif +#endif +#undef ET_DEBUG /* * setting reset address @@ -48,11 +68,13 @@ * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. */ -#define CFG_RESET_ADDRESS 0x36000000 +/* #define CFG_RESET_ADDRESS 0x36000000 */ /* gpio */ +#ifdef XILINX_GPIO_BASEADDR #define CFG_GPIO_0 1 #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR +#endif /* interrupt controller */ #define CFG_INTC_0 1 @@ -118,6 +140,25 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) +#ifndef XILINX_SYSACE_BASEADDR +#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ + CFG_CMD_MEMORY |\ + CFG_CMD_IRQ |\ + CFG_CMD_BDI |\ + CFG_CMD_NET |\ + CFG_CMD_IMI |\ + CFG_CMD_ECHO |\ + CFG_CMD_CACHE |\ + CFG_CMD_RUN |\ + CFG_CMD_AUTOSCRIPT |\ + CFG_CMD_ASKENV |\ + CFG_CMD_LOADS |\ + CFG_CMD_LOADB |\ + CFG_CMD_MISC |\ + CFG_CMD_MFSL |\ + CFG_CMD_PING \ + ) +#else #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ CFG_CMD_MEMORY |\ CFG_CMD_IRQ |\ @@ -134,8 +175,10 @@ CFG_CMD_MISC |\ CFG_CMD_FAT |\ CFG_CMD_EXT2 |\ + CFG_CMD_MFSL |\ CFG_CMD_PING \ ) +#endif /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -150,7 +193,7 @@ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME "ml401" +#define CONFIG_HOSTNAME "xupv2p" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 @@ -166,11 +209,13 @@ "echo" /* system ace */ +#ifdef XILINX_SYSACE_BASEADDR #define CONFIG_SYSTEMACE /* #define DEBUG_SYSTEMACE */ #define SYSTEMACE_CONFIG_FPGA #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH #define CONFIG_DOS_PARTITION +#endif #endif /* __CONFIG_H */ |