diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/quad100hd.h | 293 |
1 files changed, 293 insertions, 0 deletions
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h new file mode 100644 index 0000000..00f80e4 --- /dev/null +++ b/include/configs/quad100hd.h @@ -0,0 +1,293 @@ +/* + * (C) Copyright 2008 + * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * quad100hd.h - configuration for Quad100hd board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EP 1 /* Specifc 405EP support*/ + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + +#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */ +#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */ + +#define CFG_ENV_IS_IN_EEPROM 1 /* use the EEPROM for environment vars */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x01 /* PHY address */ +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 +#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_LOG +#undef CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#undef CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*----------------------------------------------------------------------- + * SDRAM + *----------------------------------------------------------------------*/ +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 +#define CFG_SDRAM_SIZE 0x02000000 /* 32 MB */ + +/* FIX! SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * JFFS2 + */ +#define CFG_JFFS2_FIRST_BANK 0 +#ifdef CFG_KERNEL_IN_JFFS2 +#define CFG_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */ +#else /* kernel not in JFFS */ +#define CFG_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */ +#endif +#define CFG_JFFS2_NUM_BANKS 1 + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */ + +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CFG_EEPROM_SIZE 0x2000 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (TEXT_BASE) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_INCREMENT 0 /* there is only one bank */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x00050000 /* Offset of Environment Sector */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_EEPROM +#define CFG_ENV_SIZE 0x400 /* Size of Environment vars */ +#define CFG_ENV_OFFSET 0x00000000 +#define CFG_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */ +#endif + +/* partly from PPCBoot */ +/* NAND */ +#define CONFIG_NAND +#ifdef CONFIG_NAND +#define CFG_NAND_BASE 0x60000000 +#define CFG_NAND_CS 10 /* our CS is GPIO10 */ +#define CFG_NAND_RDY 23 /* our RDY is GPIO23 */ +#define CFG_NAND_CE 24 /* our CE is GPIO24 */ +#define CFG_NAND_CLE 31 /* our CLE is GPIO31 */ +#define CFG_NAND_ALE 30 /* our ALE is GPIO30 */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +/* see ./cpu/ppc4xx/start.S */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + * Taken from PPCBoot board/icecube/icecube.h + */ + +/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */ +#define CFG_EBC_PB0AP 0x04002480 +/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */ +#define CFG_EBC_PB0CR 0xFFC5A000 +#define CFG_EBC_PB1AP 0x04005480 +#define CFG_EBC_PB1CR 0x60018000 +#define CFG_EBC_PB2AP 0x00000000 +#define CFG_EBC_PB2CR 0x00000000 +#define CFG_EBC_PB3AP 0x00000000 +#define CFG_EBC_PB3CR 0x00000000 +#define CFG_EBC_PB4AP 0x00000000 +#define CFG_EBC_PB4CR 0x00000000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * Taken in part from PPCBoot board/icecube/icecube.h + */ +/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */ +#define CFG_GPIO0_OSRH 0x55555550 +#define CFG_GPIO0_OSRL 0x00000110 +#define CFG_GPIO0_ISR1H 0x00000000 +#define CFG_GPIO0_ISR1L 0x15555445 +#define CFG_GPIO0_TSRH 0x00000000 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xFFFF8097 +#define CFG_GPIO0_ODR 0x00000000 + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* ENVIRONMENT VARS */ + +#define CONFIG_IPADDR 192.168.1.67 +#define CONFIG_SERVERIP 192.168.1.50 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_LOADADDR 300000 +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 + +#endif /* __CONFIG_H */ |