diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/AdderII.h | 4 | ||||
| -rw-r--r-- | include/configs/MPC8540ADS.h | 331 | ||||
| -rw-r--r-- | include/configs/MPC8560ADS.h | 377 | ||||
| -rw-r--r-- | include/configs/NSCU.h | 2 | ||||
| -rw-r--r-- | include/configs/PPChameleonEVB.h | 131 | ||||
| -rw-r--r-- | include/configs/TOP860.h | 8 | ||||
| -rw-r--r-- | include/configs/ixdp425.h | 4 | ||||
| -rw-r--r-- | include/configs/omap1510.h | 1 | ||||
| -rw-r--r-- | include/configs/omap1610inn.h | 4 | ||||
| -rw-r--r-- | include/configs/sacsng.h | 46 | ||||
| -rw-r--r-- | include/configs/trab.h | 2 |
11 files changed, 807 insertions, 103 deletions
diff --git a/include/configs/AdderII.h b/include/configs/AdderII.h index 4c2ba7d..5e0bbe3 100644 --- a/include/configs/AdderII.h +++ b/include/configs/AdderII.h @@ -146,7 +146,6 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - /* SIU Module Configuration Register */ #define CFG_SIUMCR ( SIUMCR_AEME | SIUMCR_MLRC01 | SIUMCR_DBGC10 ) @@ -171,7 +170,7 @@ /* PLPRCR - PLL, Low-Power, and Reset Control Register */ #define CFG_PLPRCR ((( MPC8XX_FACT - 1 ) << PLPRCR_MF_SHIFT ) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST ) + PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST ) /* SCCR - System Clock and reset Control Register */ #define SCCR_MASK SCCR_EBDF11 @@ -223,4 +222,3 @@ #endif /* __CONFIG_H */ - diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h new file mode 100644 index 0000000..951d1fe --- /dev/null +++ b/include/configs/MPC8540ADS.h @@ -0,0 +1,331 @@ +/* + * (C) Copyright 2002,2003 Motorola,Inc. + * Xianghua Xiao <X.Xiao@motorola.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* mpc8540ads board configuration file */ +/* please refer to doc/README.mpc85xxads for more info */ +/* make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ +#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1 Chip */ +#define CONFIG_MPC8540 1 /* MPC8540 specific */ +#define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific*/ + +#undef CONFIG_PCI /* pci ethernet support */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ + +#if defined(CONFIG_MPC85xx_REV1) +#define CONFIG_DDR_DLL /* possible DLL fix needed */ +#endif + +/* Using Localbus SDRAM to emulate flash before we can program the flash, + * normally you only need a flash-boot image(u-boot.bin),if unsure undef this. + */ +#undef CONFIG_RAM_AS_FLASH + +#if !defined(CONFIG_PCI) /* some PCI card is 33Mhz only */ +#define CONFIG_SYS_CLK_FREQ 66000000 /* sysclk for MPC85xx */ +#else +#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ +#endif + +#if !defined(CONFIG_SPD_EEPROM) /* manually set up DDR parameters */ +#define CONFIG_DDR_SETTING +#endif + +/* below can be toggled for performance analysis. otherwise use default */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#undef CONFIG_BTB /* toggle branch predition */ +#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00400000 + +#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) +#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both." +#endif + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_SIZE 128 /* DDR is now 128MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ +#else +#define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ +#endif +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */ +#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */ +#else /* Boot from real Flash */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */ +#define CFG_BR0_PRELIM 0xff001801 /* port size 32bit */ +#endif + +#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms)*/ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ + +#if defined(CONFIG_DDR_SETTING) +#define CFG_DDR_CS0_BNDS 0x00000007 /* 0-128MB */ +#define CFG_DDR_CS0_CONFIG 0x80000002 +#define CFG_DDR_TIMING_1 0x37344321 +#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning*/ +#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR*/ +#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ +#define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page*/ +#endif + +#undef CONFIG_CLOCKS_IN_MHZ + +/* local bus definitions */ +#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ +#define CFG_OR2_PRELIM 0xfc006901 +#define CFG_LBC_LCRR 0x00030004 /* local bus freq divider*/ +#define CFG_LBC_LBCR 0x00000000 +#define CFG_LBC_LSRT 0x20000000 +#define CFG_LBC_MRTPR 0x20000000 +#define CFG_LBC_LSDMR_1 0x2861b723 +#define CFG_LBC_LSDMR_2 0x0861b723 +#define CFG_LBC_LSDMR_3 0x0861b723 +#define CFG_LBC_LSDMR_4 0x1861b723 +#define CFG_LBC_LSDMR_5 0x4061b723 + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ +#else +#define CFG_BR4_PRELIM 0xfc000801 /* 32KB, 8-bit wide for ADS config reg */ +#endif +#define CFG_OR4_PRELIM 0xffffe1f1 +#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000) + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +/* General PCI */ +#define CFG_PCI_MEM_BASE 0xe0000000 +#define CFG_PCI_MEM_PHYS 0xe0000000 +#define CFG_PCI_MEM_SIZE 0x10000000 +#if defined(CONFIG_PCI) +#define CONFIG_NET_MULTI +#undef CONFIG_EEPRO100 +#define CONFIG_TULIP +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + #if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/ + #endif +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +#if defined(CONFIG_MPC85xx_REV1) /* Errata PCI 8 */ + #define CFG_PCI_SUBSYS_DEVICEID 0x0003 +#else + #define CFG_PCI_SUBSYS_DEVICEID 0x0008 +#endif +#elif defined(CONFIG_TSEC_ENET) +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 8 /* PHY address */ +#endif + +/* Environment */ +#ifndef CFG_RAMBOOT + #if defined(CONFIG_RAM_AS_FLASH) + #define CFG_ENV_IS_NOWHERE + #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000) + #define CFG_ENV_SIZE 0x2000 + #else + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #endif + #define CFG_ENV_SIZE 0x2000 +#else +#define CFG_NO_FLASH 1 /* Flash is not usable now */ +#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +#define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8540ads-003:eth0:off console=ttyS0,115200" +/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ +#define CONFIG_BOOTCOMMAND "bootm 0xff300000 0xff700000" +#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS )) + #else + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \ + ~(CFG_CMD_ENV | \ + CFG_CMD_LOADS )) + #endif +#else + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C ) + #else + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) + #endif +#endif +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "MPC8540ADS=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x1000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* NOTE: change below for your network setting!!! */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 00:01:af:07:9b:8a +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b +#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#endif + +#define CONFIG_SERVERIP 163.12.64.52 +#define CONFIG_IPADDR 10.82.0.105 +#define CONFIG_GATEWAYIP 10.82.1.254 +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_HOSTNAME MPC8560ADS_PILOT_003 +#define CONFIG_ROOTPATH /home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx +#define CONFIG_BOOTFILE pImage + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h new file mode 100644 index 0000000..0d844d1 --- /dev/null +++ b/include/configs/MPC8560ADS.h @@ -0,0 +1,377 @@ +/* + * (C) Copyright 2002,2003 Motorola,Inc. + * Xianghua Xiao <X.Xiao@motorola.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* mpc8560ads board configuration file */ +/* please refer to doc/README.mpc85xx for more info */ +/* make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ +#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ +#define CONFIG_MPC8560 1 /* MPC8560 specific */ +#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific*/ + +#undef CONFIG_PCI /* pci ethernet support */ +#define CONFIG_TSEC_ENET /* tsec ethernet support*/ +#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ + +#if defined(CONFIG_MPC85xx_REV1) +#define CONFIG_DDR_DLL /* possible DLL fix needed */ +#endif + +/* Using Localbus SDRAM to emulate flash before we can program the flash, + * normally you need a flash-boot image(u-boot.bin), if so undef this. + */ +#undef CONFIG_RAM_AS_FLASH + +#if !defined(CONFIG_PCI) /* some PCI card is 33Mhz only */ +#define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */ +#else +#define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */ +#endif + +#if !defined(CONFIG_SPD_EEPROM) /* manually set up DDR parameters */ +#define CONFIG_DDR_SETTING +#endif + +/* below can be toggled for performance analysis. otherwise use default */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#undef CONFIG_BTB /* toggle branch predition */ +#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \ + defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \ + defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC)) +#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC." +#endif + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_SIZE 128 /* DDR is 128MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ +#else +#define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ +#endif +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */ +#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */ +#else /* Boot from real Flash */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */ +#define CFG_BR0_PRELIM 0xff001801 /* port size 32bit */ +#endif + +#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ + +#if defined(CONFIG_DDR_SETTING) +#define CFG_DDR_CS0_BNDS 0x00000007 /* 0-128MB */ +#define CFG_DDR_CS0_CONFIG 0x80000002 +#define CFG_DDR_TIMING_1 0x37344321 +#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning*/ +#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR*/ +#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ +#define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page*/ +#endif + +#undef CONFIG_CLOCKS_IN_MHZ + +/* local bus definitions */ +#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ +#define CFG_OR2_PRELIM 0xfc006901 +#define CFG_LBC_LCRR 0x00030004 /* local bus freq */ +#define CFG_LBC_LBCR 0x00000000 +#define CFG_LBC_LSRT 0x20000000 +#define CFG_LBC_MRTPR 0x20000000 +#define CFG_LBC_LSDMR_1 0x2861b723 +#define CFG_LBC_LSDMR_2 0x0861b723 +#define CFG_LBC_LSDMR_3 0x0861b723 +#define CFG_LBC_LSDMR_4 0x1861b723 +#define CFG_LBC_LSDMR_5 0x4061b723 + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ +#else +#define CFG_BR4_PRELIM 0xfc000801 /* 32KB, 8-bit wide for ADS config reg */ +#endif +#define CFG_OR4_PRELIM 0xffffe1f1 +#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000) + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else */ +#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ + +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +#define CFG_PCI_MEM_BASE 0xe0000000 +#define CFG_PCI_MEM_PHYS 0xe0000000 +#define CFG_PCI_MEM_SIZE 0x10000000 + +#if defined(CONFIG_PCI) /* PCI Ethernet card */ +#define CONFIG_NET_MULTI +#define CONFIG_EEPRO100 +#undef CONFIG_TULIP +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + #if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ + #endif +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +#if defined(CONFIG_MPC85xx_REV1) /* Errata PCI 7 */ + #define CFG_PCI_SUBSYS_DEVICEID 0x0003 +#else + #define CFG_PCI_SUBSYS_DEVICEID 0x0009 +#endif +#elif defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 8 /* PHY address */ +#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ +#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ +#undef CONFIG_ETHER_NONE /* define if ether on something else */ +#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ + #if (CONFIG_ETHER_INDEX == 2) + /* + * - Rx-CLK is CLK13 + * - Tx-CLK is CLK14 + * - Select bus for bd/buffers + * - Full duplex + */ + #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) + #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) + #define CFG_CPMFCR_RAMTYPE 0 + #define CFG_FCC_PSMR (FCC_PSMR_FDE) + #define FETH2_RST 0x01 + #elif (CONFIG_ETHER_INDEX == 3) + /* need more definitions here for FE3 */ + #define FETH3_RST 0x80 + #endif /* CONFIG_ETHER_INDEX */ +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +/* + * GPIO pins used for bit-banged MII communications + */ +#define MDIO_PORT 2 /* Port C */ +#define MDIO_ACTIVE (iop->pdir |= 0x00400000) +#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) +#define MDIO_READ ((iop->pdat & 0x00400000) != 0) + +#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ + else iop->pdat &= ~0x00400000 + +#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ + else iop->pdat &= ~0x00200000 + +#define MIIDELAY udelay(1) +#endif + +/* Environment */ +#ifndef CFG_RAMBOOT + #if defined(CONFIG_RAM_AS_FLASH) + #define CFG_ENV_IS_NOWHERE + #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000) + #define CFG_ENV_SIZE 0x2000 + #else + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 128K(one sector) for env */ + #endif + #define CFG_ENV_SIZE 0x2000 +#else +#define CFG_NO_FLASH 1 /* Flash is not usable now */ +#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +#define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200" +/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ +#define CONFIG_BOOTCOMMAND "bootm 0xff400000 0xff700000" +#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ + CFG_CMD_PING | CFG_CMD_I2C) & \ + ~(CFG_CMD_ENV | \ + CFG_CMD_LOADS )) + #elif defined(CONFIG_TSEC_ENET) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \ + CFG_CMD_I2C ) & \ + ~(CFG_CMD_ENV)) + #elif defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ + CFG_CMD_PING | CFG_CMD_I2C) & \ + ~(CFG_CMD_ENV)) + #endif +#else + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ + CFG_CMD_PING | CFG_CMD_I2C) + #elif defined(CONFIG_TSEC_ENET) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \ + CFG_CMD_I2C) + #elif defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ + CFG_CMD_PING | CFG_CMD_I2C) + #endif +#endif +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "MPC8560ADS=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x1000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/*Note: change below for your network setting!!! */ +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_ETHADDR 00:01:af:07:9b:8a +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b +#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#endif + +#define CONFIG_SERVERIP 163.12.64.52 +#define CONFIG_IPADDR 10.82.0.105 +#define CONFIG_GATEWAYIP 10.82.1.254 +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_HOSTNAME MPC8560ADS_PILOT_003 +#define CONFIG_ROOTPATH /home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx +#define CONFIG_BOOTFILE pImage + +#endif /* __CONFIG_H */ diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 3bf54d2..7a1cc7e 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -402,7 +402,7 @@ #define CFG_BR5_ISP1362 ((CFG_ISP1362_BASE & BR_BA_MSK) | \ BR_PS_16 | BR_MS_GPCM | BR_V ) #endif /* CONFIG_ISP1362_USB */ - + /* * Memory Periodic Timer Prescaler * diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 1630bc3..ca045ad 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -31,7 +31,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_PPCHAMELEON_MODULE_BA 0 /* Basic Model */ +#define CONFIG_PPCHAMELEON_MODULE_BA 0 /* Basic Model */ #define CONFIG_PPCHAMELEON_MODULE_ME 1 /* Medium Model */ #define CONFIG_PPCHAMELEON_MODULE_HI 2 /* High-End Model */ #ifndef CONFIG_PPCHAMELEON_MODULE_MODEL @@ -141,8 +141,8 @@ /* The following table includes the supported baudrates */ #define CFG_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } + { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ + 57600, 115200, 230400, 460800, 921600 } #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ @@ -184,79 +184,78 @@ #define NAND_DISABLE_CE(nand) do \ { \ switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ - { \ - case CFG_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \ - break; \ - case CFG_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CE); \ - break; \ - } \ + { \ + case CFG_NAND0_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \ + break; \ + case CFG_NAND1_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CE); \ + break; \ + } \ } while(0) #define NAND_ENABLE_CE(nand) do \ { \ switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ - { \ - case CFG_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \ - break; \ - case CFG_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CE); \ - break; \ - } \ + { \ + case CFG_NAND0_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \ + break; \ + case CFG_NAND1_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CE); \ + break; \ + } \ } while(0) - #define NAND_CTL_CLRALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ - { \ - case CFG_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_ALE); \ - break; \ - case CFG_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_ALE); \ - break; \ - } \ + { \ + case CFG_NAND0_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_ALE); \ + break; \ + case CFG_NAND1_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_ALE); \ + break; \ + } \ } while(0) #define NAND_CTL_SETALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ - { \ - case CFG_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_ALE); \ - break; \ - case CFG_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_ALE); \ - break; \ - } \ + { \ + case CFG_NAND0_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_ALE); \ + break; \ + case CFG_NAND1_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_ALE); \ + break; \ + } \ } while(0) #define NAND_CTL_CLRCLE(nandptr) do \ { \ switch((unsigned long)nandptr) \ - { \ - case CFG_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CLE); \ - break; \ - case CFG_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CLE); \ - break; \ - } \ + { \ + case CFG_NAND0_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CLE); \ + break; \ + case CFG_NAND1_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CLE); \ + break; \ + } \ } while(0) #define NAND_CTL_SETCLE(nandptr) do { \ switch((unsigned long)nandptr) { \ - case CFG_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \ - break; \ - case CFG_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CLE); \ - break; \ - } \ + case CFG_NAND0_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \ + break; \ + case CFG_NAND1_BASE: \ + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CLE); \ + break; \ + } \ } while(0) #ifdef NAND_NO_RB @@ -285,7 +284,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */ #undef CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ + /* resource configuration */ #define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ @@ -349,7 +348,7 @@ #define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CFG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */ #define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/ - /* total size of a CAT24WC16 is 2048 bytes */ + /* total size of a CAT24WC16 is 2048 bytes */ #define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ #define CFG_NVRAM_SIZE 242 /* NVRAM size */ @@ -375,7 +374,7 @@ * Cache Configuration */ #define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */ - /* have only 8kB, 16kB is save here */ + /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ @@ -659,23 +658,23 @@ !----------------------------------------------------------------------- */ #define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) #define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \ - PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) #define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) #define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ - PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) #define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) #define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) #if 0 /* test-only */ #define PLLMR0_DEFAULT PLLMR0_266_133_66_33 #define PLLMR1_DEFAULT PLLMR1_266_133_66_33 diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 535ec79..7b9fdc4 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -275,7 +275,7 @@ * 1 CSR 0 Checkstop reset enable * 1 LOLRE 0 Loss-of-lock reset enable * 1 FIOPD 0 Force I/O pull down - * 5 0 00000 + * 5 0 00000 */ #define CFG_PLPRCR (PLPRCR_TEXPS | ((CFG_MF-1)<<20)) @@ -322,8 +322,8 @@ * 1 SEME 0 Sync external master enable * 1 BSC 0 Byte strobe configuration * 1 GB5E 0 GPL_B5 enable - * 1 B2DD 0 Bank 2 double drive - * 1 B3DD 0 Bank 3 double drive + * 1 B2DD 0 Bank 2 double drive + * 1 B3DD 0 Bank 3 double drive * 4 0 0000 */ #define CFG_SIUMCR (SIUMCR_MLRC11) @@ -412,7 +412,7 @@ #define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE \ ) - + /* * Set default IP stuff just to get bootstrap entries into the diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 3d814d0..1862b06 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -68,7 +68,7 @@ #define CONFIG_SERVERIP 192.168.0.250 #define CONFIG_BOOTCOMMAND "bootm 50040000" #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG +#define CONFIG_CMDLINE_TAG #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ @@ -93,7 +93,7 @@ #define CFG_LOAD_ADDR 0x00010000 /* default load address */ #define CFG_HZ 3333333 /* spec says 66.666 MHz, but it appears to be 33 */ - /* valid baudrates */ + /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h index dfcb367..2658135 100644 --- a/include/configs/omap1510.h +++ b/include/configs/omap1510.h @@ -533,7 +533,6 @@ typedef struct { #define WDTIM_CONTROL_ST BIT7 - /* --------------------------------------------------------------------------- * Differentiating processor versions for those who care. * --------------------------------------------------------------------------- diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index 55fad43..d65e2a0 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -67,7 +67,7 @@ #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE (-4) #define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ -#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart +#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ /* @@ -120,7 +120,7 @@ #define CFG_LOAD_ADDR 0x10000000 /* default load address */ -/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by +/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by * DPLL1. This time is further subdivided by a local divisor. */ #define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index cc49366..4411a11 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -473,13 +473,13 @@ /* Add support for a few extra bootp options like: * - File size * - DNS (up to 2 servers) - * - Send hostname to DHCP server + * - Send hostname to DHCP server */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE | \ CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME) + CONFIG_BOOTP_DNS2 | \ + CONFIG_BOOTP_SEND_HOSTNAME) /* undef this to save memory */ #define CFG_LONGHELP @@ -497,7 +497,7 @@ */ #define CONFIG_TIMESTAMP -/* If this variable is defined, an environment variable named "ver" +/* If this variable is defined, an environment variable named "ver" * is created by U-Boot showing the U-Boot version. */ #define CONFIG_VERSION_VARIABLE @@ -553,40 +553,40 @@ * Miscellaneous configurable options */ #define CFG_BOOTM_HEADER_QUIET 1 /* Suppress the image header dump */ - /* in the bootm command. */ + /* in the bootm command. */ #define CFG_BOOTM_PROGESS_QUIET 1 /* Suppress the progress displays, */ - /* "## <message>" from the bootm cmd */ + /* "## <message>" from the bootm cmd */ #define CFG_BOOTP_CHECK_HOSTNAME 1 /* If checkhostname environment is */ - /* defined, then the hostname param */ - /* validated against checkhostname. */ + /* defined, then the hostname param */ + /* validated against checkhostname. */ #define CFG_BOOTP_RETRY_COUNT 0x40000000 /* # of timeouts before giving up */ #define CFG_BOOTP_SHORT_RANDOM_DELAY 1 /* Use a short random delay value */ - /* (limited to maximum of 1024 msec) */ + /* (limited to maximum of 1024 msec) */ #define CFG_CHK_FOR_ABORT_AT_LEAST_ONCE 1 - /* Check for abort key presses */ - /* at least once in dependent of the */ - /* CONFIG_BOOTDELAY value. */ + /* Check for abort key presses */ + /* at least once in dependent of the */ + /* CONFIG_BOOTDELAY value. */ #define CFG_CONSOLE_INFO_QUIET 1 /* Don't print console @ startup */ #define CFG_FAULT_ECHO_LINK_DOWN 1 /* Echo the inverted Ethernet link */ - /* state to the fault LED. */ + /* state to the fault LED. */ #define CFG_FAULT_MII_ADDR 0x02 /* MII addr of the PHY to check for */ - /* the Ethernet link state. */ + /* the Ethernet link state. */ #define CFG_STATUS_FLASH_UNTIL_TFTP_OK 1 /* Keeping the status LED flashing */ - /* until the TFTP is successful. */ + /* until the TFTP is successful. */ #define CFG_STATUS_OFF_AFTER_NETBOOT 1 /* After a successful netboot, */ - /* turn off the STATUS LEDs. */ + /* turn off the STATUS LEDs. */ #define CFG_TFTP_BLINK_STATUS_ON_DATA_IN 1 /* Blink status LED based on */ - /* incoming data. */ + /* incoming data. */ #define CFG_TFTP_BLOCKS_PER_HASH 100 /* For every XX blocks, output a '#' */ - /* to signify that tftp is moving. */ + /* to signify that tftp is moving. */ #define CFG_TFTP_HASHES_PER_FLASH 200 /* For every '#' hashes, */ - /* flash the status LED. */ + /* flash the status LED. */ #define CFG_TFTP_HASHES_PER_LINE 65 /* Only output XX '#'s per line */ - /* during the tftp file transfer. */ + /* during the tftp file transfer. */ #define CFG_TFTP_PROGESS_QUIET 1 /* Suppress the progress displays */ - /* '#'s from the tftp command. */ + /* '#'s from the tftp command. */ #define CFG_TFTP_STATUS_QUIET 1 /* Suppress the status displays */ - /* issued during the tftp command. */ + /* issued during the tftp command. */ #define CFG_TFTP_TIMEOUT_COUNT 5 /* How many timeouts TFTP will allow */ /* before it gives up. */ @@ -796,7 +796,7 @@ SYPCR_LBME |\ SYPCR_SWRI |\ SYPCR_SWP |\ - SYPCR_SWE) + SYPCR_SWE) #else #define CFG_SYPCR (SYPCR_SWTC |\ SYPCR_BMT |\ diff --git a/include/configs/trab.h b/include/configs/trab.h index 0e6ffd9..caf1bbd 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -334,7 +334,7 @@ /*----------------------------------------------------------------------- * burn-in test stuff. - * + * * BURN_IN_CYCLE_DELAY defines the seconds to wait between each burn-in cycle * Because the burn-in test itself causes also an delay of about 4 seconds, * this time must be subtracted from the desired overall burn-in cycle time. |