diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/MIP405.h | 4 | ||||
| -rw-r--r-- | include/configs/PIP405.h | 4 | ||||
| -rw-r--r-- | include/configs/incaip.h | 63 | ||||
| -rw-r--r-- | include/configs/innokom.h | 16 | ||||
| -rw-r--r-- | include/configs/wepep250.h | 188 |
5 files changed, 254 insertions, 21 deletions
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 1dd7f3a..477be52 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -109,7 +109,7 @@ #define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ -#define CONFIG_BOOTCOMMAND "diskboot 200000 0:1; bootm" /* autoboot command */ +#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */ #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */ #define CONFIG_IPADDR 10.0.0.100 @@ -162,7 +162,7 @@ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ 57600, 115200, 230400, 460800, 921600 } -#define CFG_LOAD_ADDR 0x200000 /* default load address */ +#define CFG_LOAD_ADDR 0x400000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index a5fc8d9..5ecb537 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -113,7 +113,7 @@ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ -#define CONFIG_BOOTCOMMAND "diskboot 200000 0:1; bootm" /* autoboot command */ +#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */ #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */ #define CONFIG_IPADDR 10.0.0.100 @@ -166,7 +166,7 @@ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ 57600, 115200, 230400, 460800, 921600 } -#define CFG_LOAD_ADDR 0x200000 /* default load address */ +#define CFG_LOAD_ADDR 0x400000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ diff --git a/include/configs/incaip.h b/include/configs/incaip.h index bc0db84..3b648c1 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -34,18 +34,60 @@ /* allowed values: 100000000 and 150000000 */ #define CPU_CLOCK_RATE 150000000 /* 150 MHz clock for the MIPS core */ -#define CONFIG_BAUDRATE 115200 +#if CPU_CLOCK_RATE == 100000000 +#define INFINEON_EBU_BOOTCFG 0x20C4 /* CMULT = 4 for 100 MHz */ +#else +#define INFINEON_EBU_BOOTCFG 0x40C4 /* CMULT = 8 for 150 MHz */ +#endif -#define CFG_SDRAM_BASE 0x80000000 -#define CFG_MALLOC_LEN 128*1024 +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CFG_BOOTPARAMS_LEN 128*1024 +#define CONFIG_BAUDRATE 115200 /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF) +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off\0" \ + "addmisc=setenv bootargs $(bootargs) " \ + "console=ttyS0,$(baudrate) " \ + "ethaddr=$(ethaddr) " \ + "panic=1\0" \ + "flash_nfs=run nfsargs addip addmisc;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip addmisc;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 80500000 $(bootfile);" \ + "run nfsargs addip addmisc;bootm\0" \ + "rootpath=/opt/eldk/mips_4KC\0" \ + "bootfile=/tftpboot/INCA/uImage\0" \ + "kernel_addr=B0040000\0" \ + "ramdisk_addr=B0100000\0" \ + "u-boot=/tftpboot/INCA/u-boot.bin\0" \ + "load=tftp 80500000 $(u-boot)\0" \ + "update=protect off 1:0-2;era 1:0-2;" \ + "cp.b 80500000 B0000000 $(filesize)\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_ELF ) #include <cmd_confdefs.h> /* @@ -55,12 +97,19 @@ #define CFG_PROMPT "INCA-IP # " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_HZ (CPU_CLOCK_RATE/2) #define CFG_MAXARGS 16 /* max number of command args*/ +#define CFG_MALLOC_LEN 128*1024 + +#define CFG_BOOTPARAMS_LEN 128*1024 + +#define CFG_HZ (CPU_CLOCK_RATE/2) + +#define CFG_SDRAM_BASE 0x80000000 + #define CFG_LOAD_ADDR 0x80100000 /* default load address */ -#define CFG_MEMTEST_START 0x80200000 +#define CFG_MEMTEST_START 0x80100000 #define CFG_MEMTEST_END 0x80800000 /*----------------------------------------------------------------------- diff --git a/include/configs/innokom.h b/include/configs/innokom.h index c2267bd..312c854 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -62,7 +62,8 @@ #define CONFIG_BAUDRATE 19200 #define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) +#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP) +/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -78,11 +79,6 @@ #define CONFIG_CMDLINE_TAG 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - /* * Miscellaneous configurable options */ @@ -186,7 +182,7 @@ /* - * GPIO settings; see BDI2000 config file for details + * GPIO settings * * GP15 == nCS1 is 1 * GP24 == SFRM is 1 @@ -391,7 +387,7 @@ * [32:26] 0 - reserved * [25] 0 - K2FREE: not free running * [24] 0 - K1FREE: not free running - * [23] 0 - K0FREE: not free running + * [23] 1 - K0FREE: not free running * [22] 0 - SLFRSH: self refresh disabled * [21] 0 - reserved * [20] 0 - APD: no auto power down @@ -401,11 +397,11 @@ * [16] 1 - K1RUN: enable SDCLK1 * [15] 1 - E1PIN: SDRAM clock enable * [14] 1 - K0DB2: SDCLK0 is MemClk - * [13] 1 - K0RUN: disable SDCLK0 + * [13] 0 - K0RUN: disable SDCLK0 * [12] 1 - E0PIN: disable SDCKE0 * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 */ -#define CFG_MDREFR_VAL 0x0001F018 +#define CFG_MDREFR_VAL 0x0081D018 /* MDMRS: Mode Register Set Configuration Register * diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h new file mode 100644 index 0000000..c88c4ab --- /dev/null +++ b/include/configs/wepep250.h @@ -0,0 +1,188 @@ +/* + * Copyright (C) 2003 ETC s.r.o. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Written by Peter Figuli <peposh@etc.sk>, 2003. + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_PXA250 1 /* this is an PXA250 CPU */ +#define CONFIG_WEPEP250 1 /* config for wepep250 board */ +#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ + + +/* + * Select serial console configuration + */ +#define CONFIG_BTUART 1 /* BTUART is default on WEP dev board */ +#define CONFIG_BAUDRATE 115200 + + +/* + * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if + * neccessary in include/cmd_confdefs.h file. (Un)comment for getting + * functionality or size of u-boot code. + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + & ~CFG_CMD_NET \ + & ~CFG_CMD_LOADS \ + & ~CFG_CMD_CONSOLE \ + & ~CFG_CMD_AUTOSCRIPT \ +/* | CFG_CMD_JFFS2 */ \ + ) +#include <cmd_confdefs.h> + +/* + * Boot options. Setting delay to -1 stops autostart count down. + * NOTE: Sending parameters to kernel depends on kernel version and + * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept + * parameters at all! Do not get confused by them so. + */ +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=32m console=ttyS01,115200n8" +#define CONFIG_BOOTCOMMAND "bootm 40000" + + +/* + * General options for u-boot. Modify to save memory foot print + */ +#define CFG_LONGHELP /* undef saves memory */ +#define CFG_PROMPT "WEP> " /* prompt string */ +#define CFG_CBSIZE 256 /* console I/O buffer */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */ +#define CFG_MAXARGS 16 /* max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */ + +#define CFG_MEMTEST_START 0xa0400000 /* memtest test area */ +#define CFG_MEMTEST_END 0xa0800000 + +#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x141 /* core clock - register value */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Definitions related to passing arguments to kernel. + */ +#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ +#undef CONFIG_INITRD_TAG /* do not send initrd params */ +#undef CONFIG_VFD /* do not send framebuffer setup */ + + +/* + * Malloc pool need to host env + 128 Kb reserve for other allocations. + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) ) + +#define CONFIG_STACKSIZE (120<<10) /* stack size */ + +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ +#endif + +/* + * SDRAM Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ +#define WEP_SDRAM_1 0xa0000000 /* SDRAM bank #1 */ +#define WEP_SDRAM_1_SIZE 0x02000000 /* 32 MB ( 2 chip ) */ +#define WEP_SDRAM_2 0xa2000000 /* SDRAM bank #2 */ +#define WEP_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define WEP_SDRAM_3 0xa8000000 /* SDRAM bank #3 */ +#define WEP_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define WEP_SDRAM_4 0xac000000 /* SDRAM bank #4 */ +#define WEP_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x02000000 + +/* Uncomment used SDRAM chip */ +#define WEP_SDRAM_K4S281633 +/*#define WEP_SDRAM_K4S561633*/ + + +/* + * Configuration for FLASH memory + */ +#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ +#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ +#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */ +#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ +#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/ +#define WEP_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */ +#define WEP_FLASH_BASE 0x0000000 /* location of flash memory */ +#define WEP_FLASH_UNLOCK 1 /* perform hw unlock first */ + + +/* This should be defined if CFI FLASH device is present. Actually benefit + is not so clear to me. In other words we can provide more informations + to user, but this expects more complex flash handling we do not provide + now.*/ +#undef CFG_FLASH_CFI + +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */ + +#define CFG_FLASH_BASE WEP_FLASH_BASE + +/* + * This is setting for JFFS2 support in u-boot. + * Right now there is no gain for user, but later on booting kernel might be + * possible. Consider using XIP kernel running from flash to save RAM + * footprint. + * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_FIRST_SECTOR 5 +#define CFG_JFFS2_NUM_BANKS 1 + +/* + * Environment setup. Definitions of monitor location and size with + * definition of environment setup ends up in 2 possibilities. + * 1. Embeded environment - in u-boot code is space for environment + * 2. Environment is read from predefined sector of flash + * Right now we support 2. possiblity, but expecting no env placed + * on mentioned address right now. This also needs to provide whole + * sector for it - for us 256Kb is really waste of memory. U-boot uses + * default env. and until kernel parameters could be sent to kernel + * env. has no sense to us. + */ + +#define CFG_MONITOR_BASE PHYS_FLASH_1 +#define CFG_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20000 /* absolute address for now */ +#define CFG_ENV_SIZE 0x2000 + +#undef CONFIG_ENV_OVERWRITE /* env is not writable now */ + +/* + * Well this has to be defined, but on the other hand it is used differently + * one may expect. For instance loadb command do not cares :-) + * So advice is - do not relay on this... + */ +#define CFG_LOAD_ADDR 0x40000 + +#endif /* __CONFIG_H */ + |