summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/mcc200.h65
1 files changed, 10 insertions, 55 deletions
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index a8a8934..a48c21b 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -52,52 +52,19 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-#define CONFIG_PCI 1
-#define CONFIG_PCI_PNP 1
-#define CONFIG_PCI_SCAN_SHOW 1
-#undef CONFIG_PCI_SCAN_SHOW
-
-#define CONFIG_PCI_MEM_BUS 0x40000000
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_PCI_IO_BUS 0x50000000
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
-#define CONFIG_EEPRO100 1
-#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#undef CONFIG_NS8382X
-
-#define ADD_PCI_CMD CFG_CMD_PCI
-/* Partitions */
#define CONFIG_DOS_PARTITION
/* USB */
-#if 1
#define CONFIG_USB_OHCI
#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD 0
-#endif
-
-#define ADD_DOC_CMD CFG_CMD_DOC
/*
* Supported commands
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_DOC_CMD | \
- ADD_PCI_CMD | \
ADD_USB_CMD | \
CFG_CMD_BEDBUG | \
CFG_CMD_DATE | \
@@ -136,27 +103,29 @@
"flash_self=run ramargs addip;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
- "rootpath=/opt/eldk/ppc_82xx\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
"bootfile=/tftpboot/mcc200/uImage\0" \
"baudrate=115200\0" \
- "load=tftp 100000 /tftpboot/mcc200/u-boot.bin\0" \
- "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
- "cp.b 100000 fff00000 40000;" \
- "setenv filesize;saveenv\0" \
- "upd=run load;run update\0" \
+ "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \
+ "update=protect off FFF00000 +${filesize};" \
+ "era FFF00000 +${filesize};" \
+ "cp.b 200000 FFF00000 ${filesize}\0" \
"serverip=192.168.1.1\0" \
"ipaddr=192.168.133.144\0" \
"netmask=255.255.0.0\0" \
"unlock=yes\0" \
- "ethaddr=00:02:44:7d:73:3b\0" \
+ "ethaddr=00:02:44:7D:73:3B\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#define CFG_PROMPT_HUSH_PS2 "> "
+
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
/*
* I2C configuration
@@ -182,17 +151,6 @@
#define CFG_I2C_RTC_ADDR 0x51
/*
- * Disk-On-Chip configuration
- */
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
-
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
-#define CFG_DOC_BASE 0xE0000000
-#define CFG_DOC_SIZE 0x00100000
-
-/*
* Flash configuration (8,16 or 32 MB)
* TEXT base always at 0xFFF00000
* ENV_ADDR always at 0xFFF40000
@@ -308,9 +266,6 @@
#define CFG_BOOTCS_CFG 0x0004fb00
#define CFG_CS0_START CFG_FLASH_BASE
#define CFG_CS0_SIZE CFG_FLASH_SIZE
-#define CFG_CS1_START CFG_DOC_BASE
-#define CFG_CS1_SIZE CFG_DOC_SIZE
-#define CFG_CS1_CFG 0x00047800
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x33333333