diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/sorcery.h | 10 | ||||
| -rw-r--r-- | include/configs/voiceblue.h | 253 |
2 files changed, 258 insertions, 5 deletions
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index bbc946e..dcb4092 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -130,8 +130,8 @@ /* * Flexbus Chipselect configuration - * Beware: Some CS# seem to be mandatory (if these CS# are not set, - * board can hang-up in unpredictable place). + * Beware: Some CS# seem to be mandatory (if these CS# are not set, + * board can hang-up in unpredictable place). * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS# */ @@ -141,7 +141,7 @@ /* Workaround of hang-up after setting ctrl register for flash After reset this register has value 0x003ffd80, which differs - from suggested only by the number of wait states. + from suggested only by the number of wait states. #define CFG_CS0_CTRL 0x003f1580 */ @@ -271,7 +271,7 @@ /* * Various low-level settings */ -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL 0 +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 #endif /* __CONFIG_H */ diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h new file mode 100644 index 0000000..53dbf82 --- /dev/null +++ b/include/configs/voiceblue.h @@ -0,0 +1,253 @@ +/* + * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl + * + * Configuation settings for the TI OMAP VoiceBlue board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/omap1510.h> + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP1510 1 /* which is in a 5910 */ + +/* Input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */ +#define CONFIG_XTAL_FREQ 12000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R /* There is nothing to really init */ +#define BOARD_LATE_INIT /* but we flash the LEDs here */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE SZ_64M + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x0c000000 + +#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ + +/* + * FLASH organization + */ +#define CFG_FLASH_CFI /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER /* Use the common driver */ +#define CFG_MAX_FLASH_BANKS 1 +#ifdef VOICEBLUE_SMALL_FLASH +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_2 } +#else +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 } +#endif + +/* FIXME: Does not work on AMD flash */ +/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */ +#define CFG_MAX_FLASH_SECT 512 /* max # of sectors on one chip */ + +#define CFG_MONITOR_BASE PHYS_FLASH_1 +#define CFG_MONITOR_LEN SZ_128K + +/* + * Environment settings + */ +#ifdef VOICEBLUE_SMALL_FLASH +#define CFG_ENV_IS_NOWHERE +#define CFG_ENV_SIZE SZ_1K +#else +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE SZ_8K +#define CFG_ENV_SECT_SIZE SZ_64K +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE + +#define CONFIG_ENV_OVERWRITE + +#define CFG_JFFS_CUSTOM_PART /* see board/voiceblue/jffs2parts.c */ +#endif + +/* + * Size of malloc() pool + */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#ifdef VOICEBLUE_SMALL_FLASH +#define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE) +#else +#define CFG_MALLOC_LEN (SZ_4M - CFG_GBL_DATA_SIZE) +#endif + +/* + * The stack size is set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_8K /* regular stack */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x08000300 + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#ifdef VOICEBLUE_SMALL_FLASH +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_LOADB | \ + CFG_CMD_IMI | \ + CFG_CMD_FLASH | \ + CFG_CMD_MEMORY | \ + CFG_CMD_NET | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_RUN) +#else +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_LOADB | \ + CFG_CMD_IMI | \ + CFG_CMD_FLASH | \ + CFG_CMD_MEMORY | \ + CFG_CMD_NET | \ + CFG_CMD_ENV | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_JFFS2) +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +#define CONFIG_LOOPW + +#ifdef VOICEBLUE_SMALL_FLASH +#define CONFIG_BOOTDELAY 0 +#undef CONFIG_BOOTARGS /* the preboot command will set bootargs*/ +#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_PREBOOT "run setup" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "setup=setenv bootargs console=ttyS0,$(baudrate) " \ + "root=/dev/nfs ip=dhcp\0" \ + "update=erase c000000 c03ffff; " \ + "cp.b 10400000 c000000 $(filesize)\0" +#else +#define CONFIG_BOOTDELAY 3 +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_BOOTCOMMAND "run nboot" +#define CONFIG_PREBOOT "run setup" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ospart=0\0" \ + "swapos=no\0" \ + "setpart=" \ + "if test $swapos = yes; then " \ + "if test $ospart -eq 0; then chpart 4; else chpart 3; fi; "\ + "setenv swapos no; saveenv; " \ + "else " \ + "if test $ospart -eq 0; then chpart 3; else chpart 4; fi; "\ + "fi\0" \ + "setup=setenv bootargs console=ttyS0,$baudrate " \ + "mtdparts=$mtdparts\0" \ + "nfsargs=setenv bootargs $bootargs " \ + "root=/dev/nfs ip=dhcp; run setpart\0" \ + "flashargs=setenv bootargs $bootargs " \ + "root=/dev/mtdblock$partition " \ + "rootfstype=jffs2; run setpart\0" \ + "nboot=run nfsargs; bootp; tftp; bootm\0" \ + "fboot=run flashargs; fsload /boot/uImage; bootm\0" +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#ifndef VOICEBLUE_SMALL_FLASH +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE +#endif +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "# " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START PHYS_SDRAM_1 +#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. + * This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE OMAP1510_TIMER1_BASE +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +#define OMAP5910_DPLL_DIV 1 +#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ + (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) + +#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ +#define OMAP5910_LCD_DIV 2 /* CKL/4 */ +#define OMAP5910_ARM_DIV 0 /* CKL/1 */ +#define OMAP5910_DSP_DIV 0 /* CKL/1 */ +#define OMAP5910_TC_DIV 1 /* CKL/2 */ +#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ +#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ + +#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */ +#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ + (OMAP5910_LCD_DIV << 2) | \ + (OMAP5910_ARM_DIV << 4) | \ + (OMAP5910_DSP_DIV << 6) | \ + (OMAP5910_TC_DIV << 8) | \ + (OMAP5910_DSP_MMU_DIV << 10) | \ + (OMAP5910_ARM_TIM_SEL << 12)) + +#define VOICEBLUE_LED_REG 0x04030000 + +#endif /* __CONFIG_H */ |