diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/IceCube.h | 2 | ||||
| -rw-r--r-- | include/configs/MPC8544DS.h | 3 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 2 | ||||
| -rw-r--r-- | include/configs/jupiter.h | 2 | ||||
| -rw-r--r-- | include/configs/motionpro.h | 2 | ||||
| -rw-r--r-- | include/configs/sequoia.h | 3 | ||||
| -rw-r--r-- | include/configs/trizepsiv.h | 325 |
7 files changed, 334 insertions, 5 deletions
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index bdd92ba..4c16d22 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -178,7 +178,7 @@ #endif /* CONFIG_MPC5200 */ /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 9743f03..f580cca 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -310,6 +310,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCIE3_IO_BASE 0x00000000 #define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE3_MEM_BASE2 0xb0200000 +#define CFG_PCIE3_MEM_PHYS2 CFG_PCIE3_MEM_BASE2 +#define CFG_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ #if defined(CONFIG_PCI) diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index c08173b..e0c9d81 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -701,7 +701,7 @@ * Open firmware flat tree support *----------------------------------------------------------------------- */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 4070ab9..b7100e9 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -145,7 +145,7 @@ #if 0 /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 82827c6..9a21632 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -417,7 +417,7 @@ extern void __led_set(led_id_t id, int state); #define CFG_RESET_ADDRESS 0xfff00100 /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 824a812..c2e1386 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -400,7 +400,8 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h new file mode 100644 index 0000000..84998d4 --- /dev/null +++ b/include/configs/trizepsiv.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Configuation settings for the LUBBOCK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ + +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define RTC + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_FFUART 1 /* we use FFUART on Conxs */ +#define CONFIG_BTUART 1 /* we use BTUART on Conxs */ +#define CONFIG_STUART 1 /* we use STUART on Conxs */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_DOS_PARTITION 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SERVERIP 192.168.1.99 +#define CONFIG_BOOTCOMMAND "run boot_flash" +#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ + " rw root=/dev/ram initrd=0xa0800000,5m" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "program_boot_mmc=" \ + "mw.b 0xa0010000 0xff 0x20000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x1ffff; " \ + "erase 0x0 0x1ffff; " \ + "cp.b 0xa0010000 0x0 0x20000; " \ + "fi\0" \ + "program_uzImage_mmc=" \ + "mw.b 0xa0010000 0xff 0x180000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 uzImage; " \ + "then " \ + "protect off 0x40000 0x1bffff; " \ + "erase 0x40000 0x1bffff; " \ + "cp.b 0xa0010000 0x40000 0x180000; " \ + "fi\0" \ + "program_ramdisk_mmc=" \ + "mw.b 0xa0010000 0xff 0x500000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 ramdisk.gz; " \ + "then " \ + "protect off 0x1c0000 0x6bffff; " \ + "erase 0x1c0000 0x6bffff; " \ + "cp.b 0xa0010000 0x1c0000 0x500000; " \ + "fi\0" \ + "boot_mmc=" \ + "if mmcinit && " \ + "fatload mmc 0 0xa0030000 uzImage && " \ + "fatload mmc 0 0xa0800000 ramdisk.gz; " \ + "then " \ + "bootm 0xa0030000; " \ + "fi\0" \ + "boot_flash=" \ + "cp.b 0x1c0000 0xa0800000 0x500000; " \ + "bootm 0x40000\0" \ + +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +/* #define CONFIG_INITRD_TAG 1 */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00018000 +#define CFG_GPSR1_VAL 0x00000000 +#define CFG_GPSR2_VAL 0x400dc000 +#define CFG_GPSR3_VAL 0x00000000 +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPCR3_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x00018000 +#define CFG_GPDR1_VAL 0x00028801 +#define CFG_GPDR2_VAL 0x520dc000 +#define CFG_GPDR3_VAL 0x0001E000 +#define CFG_GAFR0_L_VAL 0x801c0000 +#define CFG_GAFR0_U_VAL 0x00000013 +#define CFG_GAFR1_L_VAL 0x6990100A +#define CFG_GAFR1_U_VAL 0x00000008 +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x010900F2 +#define CFG_GAFR3_L_VAL 0x54000003 +#define CFG_GAFR3_U_VAL 0x00002401 +#define CFG_GRER0_VAL 0x00000000 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GRER3_VAL 0x00000000 +#define CFG_GFER0_VAL 0x00000000 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 +#define CFG_GFER3_VAL 0x00000020 + + +#define CFG_PSSR_VAL 0x20 /* CHECK */ + +/* + * Clock settings + */ +#define CFG_CKEN 0x01FFFFFF /* CHECK */ +#define CFG_CCCR 0x02000290 /* 520Mhz */ + +/* + * Memory settings + */ + +#define CFG_MSC0_VAL 0x4df84df0 +#define CFG_MSC1_VAL 0x7ff87ff4 +#define CFG_MSC2_VAL 0xa26936d4 +#define CFG_MDCNFG_VAL 0x880009C9 +#define CFG_MDREFR_VAL 0x20ca201e +#define CFG_MDMRS_VAL 0x00220022 + +#define CFG_FLYCNFG_VAL 0x00000000 +#define CFG_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000001 +#define CFG_MCMEM0_VAL 0x00004204 +#define CFG_MCMEM1_VAL 0x00010204 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00008407 +#define CFG_MCIO1_VAL 0x0000c108 + +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x08000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) +/* #define CONFIG_DM9000_USE_8BIT */ +/* #define CONFIG_DM9000_USE_16BIT */ +#define CONFIG_DM9000_USE_32BIT + +#define CONFIG_USB_OHCI_NEW 1 +#define CFG_USB_OHCI_BOARD_INIT 1 +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 +#define CFG_USB_OHCI_REGS_BASE 0x4C000000 +#define CFG_USB_OHCI_SLOT_NAME "trizepsiv" +#define CONFIG_USB_STORAGE 1 +#define CFG_USB_OHCI_CPU_INIT 1 + +/* + * FLASH and environment organization + */ + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER 1 + +#define CFG_MONITOR_BASE 0 +#define CFG_MONITOR_LEN 0x40000 + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* write flash less slowly */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* Flash environment locations */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#endif /* __CONFIG_H */ |