diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/GEN860T.h | 2 | ||||
| -rw-r--r-- | include/configs/LANTEC.h | 1 | ||||
| -rw-r--r-- | include/configs/MPC8260ADS.h | 5 | ||||
| -rw-r--r-- | include/configs/MPC8266ADS.h | 1 | ||||
| -rw-r--r-- | include/configs/MPC8313ERDB.h | 2 | ||||
| -rw-r--r-- | include/configs/MPC8641HPCN.h | 44 | ||||
| -rw-r--r-- | include/configs/RBC823.h | 1 | ||||
| -rw-r--r-- | include/configs/ep8260.h | 1 | ||||
| -rw-r--r-- | include/configs/gw8260.h | 2 | ||||
| -rw-r--r-- | include/configs/hymod.h | 1 | ||||
| -rw-r--r-- | include/configs/mpc7448hpc2.h | 4 | ||||
| -rw-r--r-- | include/configs/ppmc7xx.h | 237 | ||||
| -rw-r--r-- | include/configs/sbc8349.h | 2 |
13 files changed, 159 insertions, 144 deletions
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index d88124a..bfbf3a8 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -248,7 +248,7 @@ #endif #ifdef CONFIG_POST -u #define CONFIG_CMD_DIAG +#define CONFIG_CMD_DIAG #endif /* diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 2191c7b..46edd08 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -106,6 +106,7 @@ #undef CONFIG_CMD_IRQ #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MII #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index f3e5330..713518d 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -227,6 +227,7 @@ #undef CONFIG_CMD_HWFLOW #undef CONFIG_CMD_IDE #undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCMCIA @@ -405,9 +406,9 @@ #define CFG_BCR 0x100C0000 #define CFG_SIUMCR 0x0A200000 #define CFG_SCCR SCCR_DFBRG01 -#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801) #define CFG_OR0_PRELIM 0xFF800876 -#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801 +#define CFG_BR1_PRELIM (CFG_BCSR | 0x00001801) #define CFG_OR1_PRELIM 0xFFFF8010 /*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 3a6c977..14b041e 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -165,6 +165,7 @@ #undef CONFIG_CMD_IDE #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCMCIA diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 45a7d81..81db96f 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -265,7 +265,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 808c19f..5a511e5 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -46,8 +46,10 @@ #define CFG_RESET_ADDRESS 0xfff00100 -/*#undef CONFIG_PCI*/ -#define CONFIG_PCI +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ +#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -76,6 +78,9 @@ #define L2_ENABLE (L2CR_L2E) #ifndef CONFIG_SYS_CLK_FREQ +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) #endif @@ -93,6 +98,9 @@ #define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) + /* * DDR Setup */ @@ -296,9 +304,9 @@ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 -#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xe2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ /* PCI view of System Memory */ #define CFG_PCI_MEMORY_BUS 0x00000000 @@ -311,10 +319,10 @@ #define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CFG_PCI2_IO_BASE 0xe3000000 -#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xe3000000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) @@ -396,20 +404,20 @@ * 0xa000_0000 512M PCI-Express 2 Memory * Changed it for operating from 0xd0000000 */ -#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ +#define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT1U CFG_DBAT1U /* * BAT2 512M Cache-inhibited, guarded * 0xc000_0000 512M RapidIO Memory */ -#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ +#define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) -#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT2U CFG_DBAT2U /* @@ -428,10 +436,10 @@ * 0xe300_0000 16M PCI-Express 2 I/0 * Note that this is at 0xe0000000 */ -#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ +#define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) -#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT4U CFG_DBAT4U /* diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 5e12dab..2f6de81 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -119,6 +119,7 @@ #undef CONFIG_CMD_IRQ #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCI diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index f412ec8..025c249 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -321,6 +321,7 @@ #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_KGDB #undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCI diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 79e6aa1..ff57240 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -294,7 +294,7 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE -#definef CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS /* undef this to save memory */ #define CFG_LONGHELP diff --git a/include/configs/hymod.h b/include/configs/hymod.h index b789067..2f64ec2 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -199,6 +199,7 @@ #undef CONFIG_CMD_IDE #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_NAND +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_PCMCIA #undef CONFIG_CMD_PCI diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 4237228..f4f33f3 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -375,9 +375,9 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */ +#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */ #define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ } #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 6e451d8..fe7de7b 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -25,29 +25,30 @@ /* * Debug * - * DEBUG - Define this is you want extra debug info - * GTREGREAD - Required to build with debug - * do_bdinfo - Required to build with debug + * DEBUG - Define this is you want extra debug info + * GTREGREAD - Required to build with debug + * do_bdinfo - Required to build with debug */ #undef DEBUG -#define GTREGREAD(x) 0xFFFFFFFF +#ifdef DEBUG +#define GTREGREAD(x) 0xFFFFFFFF #define do_bdinfo(a,b,c,d) - +#endif /* * CPU type * - * CONFIG_7xx - We have a 750 or 755 CPU - * CONFIG_74xx - We have a 7400 CPU - * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) - * CONFIG_BUS_CLK - System bus clock in Hz + * CONFIG_7xx - We have a 750 or 755 CPU + * CONFIG_74xx - We have a 7400 CPU + * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) + * CONFIG_BUS_CLK - System bus clock in Hz */ #define CONFIG_7xx #undef CONFIG_74xx #undef CONFIG_ALTIVEC -#define CONFIG_BUS_CLK 66000000 +#define CONFIG_BUS_CLK 66000000 /* @@ -97,18 +98,18 @@ * Serial configuration * * CONFIG_CONS_INDEX - Serial console port number (COM1) - * CONFIG_BAUDRATE - Serial speed + * CONFIG_BAUDRATE - Serial speed */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 /* * PCI config * - * CONFIG_PCI - Enable PCI bus - * CONFIG_PCI_PNP - Enable Plug & Play support + * CONFIG_PCI - Enable PCI bus + * CONFIG_PCI_PNP - Enable Plug & Play support * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup */ @@ -120,9 +121,9 @@ /* * Network config * - * CONFIG_NET_MULTI - Support for multiple network interfaces - * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller - * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM + * CONFIG_NET_MULTI - Support for multiple network interfaces + * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller + * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM */ #define CONFIG_NET_MULTI @@ -145,7 +146,7 @@ * Boot config * * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot - * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) + * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) */ #define CONFIG_BOOTCOMMAND \ @@ -169,79 +170,79 @@ * * This board runs in a standard CHRP (Map-B) configuration. * - * Type Start End Size Width Chip Sel + * Type Start End Size Width Chip Sel * ----------- ----------- ----------- ------- ------- -------- - * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 - * User LED's 0x78000000 RCS3 - * UART 0x7C000000 RCS2 - * Mailbox 0xFF000000 RCS1 - * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 + * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 + * User LED's 0x78000000 RCS3 + * UART 0x7C000000 RCS2 + * Mailbox 0xFF000000 RCS1 + * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 * * Flash sectors are laid out as follows. * - * Sector Start End Size Comments + * Sector Start End Size Comments * ------- ----------- ----------- ------- ----------- - * 0 0xFFC00000 0xFFC3FFFF 256KB - * 1 0xFFC40000 0xFFC7FFFF 256KB - * 2 0xFFC80000 0xFFCBFFFF 256KB - * 3 0xFFCC0000 0xFFCFFFFF 256KB - * 4 0xFFD00000 0xFFD3FFFF 256KB - * 5 0xFFD40000 0xFFD7FFFF 256KB - * 6 0xFFD80000 0xFFDBFFFF 256KB - * 7 0xFFDC0000 0xFFDFFFFF 256KB - * 8 0xFFE00000 0xFFE3FFFF 256KB - * 9 0xFFE40000 0xFFE7FFFF 256KB - * 10 0xFFE80000 0xFFEBFFFF 256KB - * 11 0xFFEC0000 0xFFEFFFFF 256KB - * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here - * 13 0xFFF40000 0xFFF7FFFF 256KB - * 14 0xFFF80000 0xFFFBFFFF 256KB - * 15 0xFFFC0000 0xFFFDFFFF 128KB - * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here - * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here - * 18 0xFFFF0000 0xFFFFFFFF 64KB + * 0 0xFFC00000 0xFFC3FFFF 256KB + * 1 0xFFC40000 0xFFC7FFFF 256KB + * 2 0xFFC80000 0xFFCBFFFF 256KB + * 3 0xFFCC0000 0xFFCFFFFF 256KB + * 4 0xFFD00000 0xFFD3FFFF 256KB + * 5 0xFFD40000 0xFFD7FFFF 256KB + * 6 0xFFD80000 0xFFDBFFFF 256KB + * 7 0xFFDC0000 0xFFDFFFFF 256KB + * 8 0xFFE00000 0xFFE3FFFF 256KB + * 9 0xFFE40000 0xFFE7FFFF 256KB + * 10 0xFFE80000 0xFFEBFFFF 256KB + * 11 0xFFEC0000 0xFFEFFFFF 256KB + * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here + * 13 0xFFF40000 0xFFF7FFFF 256KB + * 14 0xFFF80000 0xFFFBFFFF 256KB + * 15 0xFFFC0000 0xFFFDFFFF 128KB + * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here + * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here + * 18 0xFFFF0000 0xFFFFFFFF 64KB */ /* * SDRAM config - see memory map details above. * - * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! - * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) + * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! + * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 0x04000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 0x04000000 /* * Flash config - see memory map details above. * - * CFG_FLASH_BASE - Start address of flash memory - * CFG_FLASH_SIZE - Total size of contiguous flash mem + * CFG_FLASH_BASE - Start address of flash memory + * CFG_FLASH_SIZE - Total size of contiguous flash mem * CFG_FLASH_ERASE_TOUT - Erase timeout in ms * CFG_FLASH_WRITE_TOUT - Write timeout in ms * CFG_MAX_FLASH_BANKS - Number of banks of flash on board * CFG_MAX_FLASH_SECT - Number of sectors in a bank */ -#define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_FLASH_ERASE_TOUT 250000 #define CFG_FLASH_WRITE_TOUT 5000 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 19 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 19 /* * Monitor config - see memory map details above * - * CFG_MONITOR_BASE - Base address of monitor code - * CFG_MALLOC_LEN - Size of malloc pool (128KB) + * CFG_MONITOR_BASE - Base address of monitor code + * CFG_MALLOC_LEN - Size of malloc pool (128KB) */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MALLOC_LEN 0x20000 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_LEN 0x20000 /* @@ -259,16 +260,16 @@ * CFG_PROMPT - Prompt string */ -#define CFG_BARGSIZE 1024 -#define CFG_BOOTMAPSZ 0x800000 -#define CFG_CBSIZE 1024 -#define CFG_LOAD_ADDR 0x100000 +#define CFG_BARGSIZE 1024 +#define CFG_BOOTMAPSZ 0x800000 +#define CFG_CBSIZE 1024 +#define CFG_LOAD_ADDR 0x100000 #define CFG_LONGHELP -#define CFG_MAXARGS 16 -#define CFG_MEMTEST_START 0x00040000 -#define CFG_MEMTEST_END 0x00040100 -#define CFG_PBSIZE 1024 -#define CFG_PROMPT "=> " +#define CFG_MAXARGS 16 +#define CFG_MEMTEST_START 0x00040000 +#define CFG_MEMTEST_END 0x00040100 +#define CFG_PBSIZE 1024 +#define CFG_PROMPT "=> " /* @@ -280,12 +281,12 @@ * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0xFFFE0000 -#define CFG_ENV_SIZE 0x1000 -#define CFG_ENV_ADDR_REDUND 0xFFFE8000 -#define CFG_ENV_SIZE_REDUND 0x1000 -#define CFG_ENV_SECT_SIZE 0x8000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR_REDUND 0xFFFE8000 +#define CFG_ENV_SIZE_REDUND 0x1000 +#define CFG_ENV_SECT_SIZE 0x8000 /* @@ -296,15 +297,15 @@ * copied to top of RAM by the init code. * * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect - * CFG_INIT_RAM_END - Size of Init RAM + * CFG_INIT_RAM_END - Size of Init RAM * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data * CFG_GBL_DATA_OFFSET - Start of global data, top of stack */ -#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) -#define CFG_INIT_RAM_END 0x4000 -#define CFG_GBL_DATA_SIZE 128 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) +#define CFG_INIT_RAM_END 0x4000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) /* @@ -341,71 +342,71 @@ * Cache config * * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) - * CFG_L2 - L2 cache enabled if defined - * L2_INIT - L2 cache init flags - * L2_ENABLE - L2 cache enable flags + * CFG_L2 - L2 cache enabled if defined + * L2_INIT - L2 cache init flags + * L2_ENABLE - L2 cache enable flags */ -#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SIZE 32 #undef CFG_L2 -#define L2_INIT 0 -#define L2_ENABLE 0 +#define L2_INIT 0 +#define L2_ENABLE 0 /* * Clocks config * - * CFG_BUS_HZ - Bus clock frequency in Hz - * CFG_BUS_CLK - As above (?) - * CFG_HZ - Decrementer freq in Hz + * CFG_BUS_HZ - Bus clock frequency in Hz + * CFG_BUS_CLK - As above (?) + * CFG_HZ - Decrementer freq in Hz */ -#define CFG_BUS_HZ CONFIG_BUS_CLK -#define CFG_BUS_CLK CONFIG_BUS_CLK -#define CFG_HZ 1000 +#define CFG_BUS_HZ CONFIG_BUS_CLK +#define CFG_BUS_CLK CONFIG_BUS_CLK +#define CFG_HZ 1000 /* * Serial port config * * CFG_BAUDRATE_TABLE - List of valid baud rates - * CFG_NS16550 - Include the NS16550 driver + * CFG_NS16550 - Include the NS16550 driver * CFG_NS16550_SERIAL - Include the serial (wrapper) driver - * CFG_NS16550_CLK - Frequency of reference clock + * CFG_NS16550_CLK - Frequency of reference clock * CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port - * CFG_NS16550_COM1 - Base address of 1st serial port + * CFG_NS16550_COM1 - Base address of 1st serial port */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_CLK 3686400 +#define CFG_NS16550_CLK 3686400 #define CFG_NS16550_REG_SIZE -8 -#define CFG_NS16550_COM1 0x7C000000 +#define CFG_NS16550_COM1 0x7C000000 /* * PCI Config - Address Map B (CHRP) */ -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x40000000 -#define CFG_PCI_MEM_BUS 0x80000000 -#define CFG_PCI_MEM_PHYS 0x80000000 -#define CFG_PCI_MEM_SIZE 0x7D000000 -#define CFG_ISA_MEM_BUS 0x00000000 -#define CFG_ISA_MEM_PHYS 0xFD000000 -#define CFG_ISA_MEM_SIZE 0x01000000 -#define CFG_PCI_IO_BUS 0x00800000 -#define CFG_PCI_IO_PHYS 0xFE800000 -#define CFG_PCI_IO_SIZE 0x00400000 -#define CFG_ISA_IO_BUS 0x00000000 -#define CFG_ISA_IO_PHYS 0xFE000000 -#define CFG_ISA_IO_SIZE 0x00800000 +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CFG_PCI_MEM_BUS 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x7D000000 +#define CFG_ISA_MEM_BUS 0x00000000 +#define CFG_ISA_MEM_PHYS 0xFD000000 +#define CFG_ISA_MEM_SIZE 0x01000000 +#define CFG_PCI_IO_BUS 0x00800000 +#define CFG_PCI_IO_PHYS 0xFE800000 +#define CFG_PCI_IO_SIZE 0x00400000 +#define CFG_ISA_IO_BUS 0x00000000 +#define CFG_ISA_IO_PHYS 0xFE000000 +#define CFG_ISA_IO_SIZE 0x00800000 #define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS -#define CFG_ISA_IO CFG_ISA_IO_PHYS -#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS +#define CFG_ISA_IO CFG_ISA_IO_PHYS +#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS /* @@ -420,12 +421,12 @@ /* * Boot flags * - * BOOTFLAG_COLD - Indicates a power-on boot - * BOOTFLAG_WARM - Indicates a software reset + * BOOTFLAG_COLD - Indicates a power-on boot + * BOOTFLAG_WARM - Indicates a software reset */ -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 #endif /* __CONFIG_H */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 83a81fe..1831bef 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -328,7 +328,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C1_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 #define CFG_I2C_OFFSET CFG_I2C2_OFFSET |