diff options
Diffstat (limited to 'include/configs/yellowstone.h')
| -rw-r--r-- | include/configs/yellowstone.h | 62 |
1 files changed, 31 insertions, 31 deletions
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index 90418e0..d83d8e7 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -28,11 +28,11 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */ +#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */ #define CONFIG_440_GR 1 /* Specific PPC440GR support */ #define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* disable - takes long time! */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ @@ -63,14 +63,14 @@ *----------------------------------------------------------------------*/ #define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */ #define CFG_INIT_RAM_END 0x2000 -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ -#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */ -#define CFG_SDRAM_BANKS (2) +#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */ +#define CFG_SDRAM_BANKS (2) /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ @@ -92,7 +92,7 @@ * *----------------------------------------------------------------------*/ #define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */ -#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */ +#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */ /*----------------------------------------------------------------------- * FLASH related @@ -107,7 +107,7 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ +#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ /*----------------------------------------------------------------------- * I2C @@ -121,7 +121,7 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/ +#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/ #undef CFG_ENV_IS_IN_FLASH /* ... not in flash */ #define CFG_ENV_IS_IN_EEPROM 1 @@ -144,7 +144,7 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_NET_MULTI 1 /* required for netconsole */ +#define CONFIG_NET_MULTI 1 /* required for netconsole */ #define CONFIG_PHY1_ADDR 3 #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ @@ -178,48 +178,48 @@ #ifdef CONFIG_440_EP /* Need to define POST */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ - /* CFG_CMD_EXT2 |*/ \ + /* CFG_CMD_EXT2 |*/ \ /* CFG_CMD_FAT |*/ \ CFG_CMD_I2C | \ /* CFG_CMD_IDE |*/ \ CFG_CMD_IRQ | \ - /* CFG_CMD_KGDB |*/ \ - CFG_CMD_MII | \ + /* CFG_CMD_KGDB |*/ \ + CFG_CMD_MII | \ CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ CFG_CMD_SDRAM | \ - CFG_CMD_FLASH | \ + CFG_CMD_FLASH | \ /* CFG_CMD_SPI |*/ \ CFG_CMD_USB | \ 0 ) & ~CFG_CMD_IMLS) #else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ - /* CFG_CMD_EXT2 |*/ \ + /* CFG_CMD_EXT2 |*/ \ /* CFG_CMD_FAT |*/ \ CFG_CMD_I2C | \ /* CFG_CMD_IDE |*/ \ CFG_CMD_IRQ | \ - /* CFG_CMD_KGDB |*/ \ - CFG_CMD_MII | \ + /* CFG_CMD_KGDB |*/ \ + CFG_CMD_MII | \ CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ CFG_CMD_SDRAM | \ - CFG_CMD_FLASH | \ + CFG_CMD_FLASH | \ /* CFG_CMD_SPI |*/ \ 0 ) & ~CFG_CMD_IMLS) #endif @@ -246,7 +246,7 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_LYNXKDI 1 /* support kdi files */ +#define CONFIG_LYNXKDI 1 /* support kdi files */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ @@ -255,18 +255,18 @@ *----------------------------------------------------------------------- */ /* General PCI */ -#define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT -#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ -#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ /* * For booting Linux, the board info and command line data |