diff options
Diffstat (limited to 'include/configs/xupv2p.h')
| -rw-r--r-- | include/configs/xupv2p.h | 37 |
1 files changed, 18 insertions, 19 deletions
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index 35001d7..c9320c2 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 Czech Technical University. + * (C) Copyright 2007 Michal Simek * * Michal SIMEK <monstr@monstr.eu> * @@ -31,6 +31,7 @@ #define CONFIG_XUPV2P 1 /* uart */ +#define CONFIG_XILINX_UARTLITE #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } @@ -48,11 +49,13 @@ * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. */ -#define CFG_RESET_ADDRESS 0x36000000 +/* #define CFG_RESET_ADDRESS 0x36000000 */ /* gpio */ +#ifdef XILINX_GPIO_BASEADDR #define CFG_GPIO_0 1 #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR +#endif /* interrupt controller */ #define CFG_INTC_0 1 @@ -65,6 +68,7 @@ #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ /* * memory layout - Example @@ -119,7 +123,6 @@ #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) - /* * BOOTP options */ @@ -128,29 +131,23 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include <config_cmd_default.h> -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_NET -#define CONFIG_CMD_IMI -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_RUN -#define CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MISC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ #define CONFIG_CMD_PING +#ifdef XILINX_SYSACE_BASEADDR +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#endif /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " @@ -162,7 +159,7 @@ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME "ml401" +#define CONFIG_HOSTNAME "xupv2p" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 @@ -178,11 +175,13 @@ "echo" /* system ace */ +#ifdef XILINX_SYSACE_BASEADDR #define CONFIG_SYSTEMACE /* #define DEBUG_SYSTEMACE */ #define SYSTEMACE_CONFIG_FPGA #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH #define CONFIG_DOS_PARTITION +#endif #endif /* __CONFIG_H */ |