diff options
Diffstat (limited to 'include/configs/xsengine.h')
| -rw-r--r-- | include/configs/xsengine.h | 120 |
1 files changed, 60 insertions, 60 deletions
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 4d1bdd7..b727413 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -35,11 +35,11 @@ #define CONFIG_DOS_PARTITION 1 #define BOARD_LATE_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ @@ -50,16 +50,16 @@ #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ -#define CFG_DRAM_BASE 0xa0000000 -#define CFG_DRAM_SIZE 0x04000000 +#define CONFIG_SYS_DRAM_BASE 0xa0000000 +#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x00000000 /* Flash Bank #2 */ #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 127 KB sectors */ -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* * JFFS2 partitions @@ -80,18 +80,18 @@ /* Environment settings */ #define CONFIG_ENV_OVERWRITE -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector (after monitor)*/ -#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Size of the Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector (after monitor)*/ +#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Size of the Environment Sector */ +#define CONFIG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (75*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (50*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (75*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (50*CONFIG_SYS_HZ) /* Timeout for Flash Write */ /* Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* Hardware drivers */ #define CONFIG_DRIVER_SMC91111 @@ -133,20 +133,20 @@ #define CONFIG_CMDLINE_TAG /* Miscellaneous configurable options */ -#define CFG_HUSH_PARSER 1 -#define CFG_PROMPT_HUSH_PS2 "> " -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0xA0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ -#define CFG_MMC_BASE 0xF0000000 -#define CFG_LOAD_ADDR 0xA0000000 /* load kernel to this address */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ +#define CONFIG_SYS_MMC_BASE 0xF0000000 +#define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */ /* Stack sizes - The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ @@ -156,53 +156,53 @@ #endif /* GP set register */ -#define CFG_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CFG_GPSR1_VAL 0x00020000 /* nPWE */ -#define CFG_GPSR2_VAL 0x0000C000 /* CS2, CS3 */ +#define CONFIG_SYS_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ +#define CONFIG_SYS_GPSR1_VAL 0x00020000 /* nPWE */ +#define CONFIG_SYS_GPSR2_VAL 0x0000C000 /* CS2, CS3 */ /* GP clear register */ -#define CFG_GPCR0_VAL 0x00000000 -#define CFG_GPCR1_VAL 0x00000000 -#define CFG_GPCR2_VAL 0x00000000 +#define CONFIG_SYS_GPCR0_VAL 0x00000000 +#define CONFIG_SYS_GPCR1_VAL 0x00000000 +#define CONFIG_SYS_GPCR2_VAL 0x00000000 /* GP direction register */ -#define CFG_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CFG_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ -#define CFG_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ +#define CONFIG_SYS_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ +#define CONFIG_SYS_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ +#define CONFIG_SYS_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ /* GP rising edge detect register */ -#define CFG_GRER0_VAL 0x00000000 -#define CFG_GRER1_VAL 0x00000000 -#define CFG_GRER2_VAL 0x00000000 +#define CONFIG_SYS_GRER0_VAL 0x00000000 +#define CONFIG_SYS_GRER1_VAL 0x00000000 +#define CONFIG_SYS_GRER2_VAL 0x00000000 /* GP falling edge detect register */ -#define CFG_GFER0_VAL 0x00000000 -#define CFG_GFER1_VAL 0x00000000 -#define CFG_GFER2_VAL 0x00000000 +#define CONFIG_SYS_GFER0_VAL 0x00000000 +#define CONFIG_SYS_GFER1_VAL 0x00000000 +#define CONFIG_SYS_GFER2_VAL 0x00000000 /* GP alternate function register */ -#define CFG_GAFR0_L_VAL 0x80000000 /* CS1 */ -#define CFG_GAFR0_U_VAL 0x00000010 /* RDY */ -#define CFG_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ -#define CFG_GAFR1_U_VAL 0x00000008 /* nPWE */ -#define CFG_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ -#define CFG_GAFR2_U_VAL 0x00000000 - -#define CFG_PSSR_VAL 0x00000020 /* Power manager sleep status */ -#define CFG_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */ -#define CFG_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */ -#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 /* CS1 */ +#define CONFIG_SYS_GAFR0_U_VAL 0x00000010 /* RDY */ +#define CONFIG_SYS_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ +#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 /* nPWE */ +#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ +#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 + +#define CONFIG_SYS_PSSR_VAL 0x00000020 /* Power manager sleep status */ +#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */ +#define CONFIG_SYS_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */ +#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ /* Memory settings */ -#define CFG_MSC0_VAL 0x25F425F0 +#define CONFIG_SYS_MSC0_VAL 0x25F425F0 /* MDCNFG: SDRAM Configuration Register */ -#define CFG_MDCNFG_VAL 0x000009C9 +#define CONFIG_SYS_MDCNFG_VAL 0x000009C9 /* MDREFR: SDRAM Refresh Control Register */ -#define CFG_MDREFR_VAL 0x00018018 +#define CONFIG_SYS_MDREFR_VAL 0x00018018 /* MDMRS: Mode Register Set Configuration Register */ -#define CFG_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_MDMRS_VAL 0x00220022 #endif /* __CONFIG_H */ |