diff options
Diffstat (limited to 'include/configs/x600.h')
| -rw-r--r-- | include/configs/x600.h | 339 |
1 files changed, 339 insertions, 0 deletions
diff --git a/include/configs/x600.h b/include/configs/x600.h new file mode 100644 index 0000000..3082aaa --- /dev/null +++ b/include/configs/x600.h @@ -0,0 +1,339 @@ +/* + * (C) Copyright 2009 + * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com> + * + * Copyright (C) 2012 Stefan Roese <sr@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_SPEAR600 /* SPEAr600 SoC */ +#define CONFIG_X600 /* on X600 board */ + +#include <asm/arch/hardware.h> + +/* Timer, HZ specific defines */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ_CLOCK 8300000 + +#define CONFIG_SYS_TEXT_BASE 0x00800040 +#define CONFIG_SYS_FLASH_BASE 0xf8000000 +/* Reserve 8KiB for SPL */ +#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */ +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO +#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_SPL_LEN) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN 0x60000 + +#define CONFIG_ENV_IS_IN_FLASH + +/* Serial Configuration (PL011) */ +#define CONFIG_SYS_SERIAL0 0xD0000000 +#define CONFIG_SYS_SERIAL1 0xD0080000 +#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \ + (void *)CONFIG_SYS_SERIAL1 } +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK (48 * 1000 * 1000) +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \ + 57600, 115200 } +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +/* NOR FLASH config options */ +#define CONFIG_ST_SMI +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000 +#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ) + +/* NAND FLASH config options */ +#define CONFIG_NAND_FSMC +#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE +#define CONFIG_MTD_ECC_SOFT +#define CONFIG_SYS_FSMC_NAND_8BIT +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* UBI/UBI config options */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE + +/* Ethernet config options */ +#define CONFIG_MII +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_SEARCH_PHY +#define CONFIG_NET_MULTI +#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +#define CONFIG_SPEAR_GPIO + +/* I2C config options */ +#define CONFIG_HARD_I2C +#define CONFIG_DW_I2C +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 0x02 +#define CONFIG_I2C_CHIPADDRESS 0x50 + +#define CONFIG_RTC_M41T62 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* FPGA config options */ +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_SPARTAN3 +#define CONFIG_FPGA_COUNT 1 + +/* + * Command support defines + */ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MII +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_LZO + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <config_cmd_default.h> + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * U-Boot Environment placing definitions. + */ +#define CONFIG_ENV_SECT_SIZE 0x00010000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE 0x02000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +/* Miscellaneous configurable options */ +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_BOOT_PARAMS_ADDR 0x00000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_OF_LIBFDT /* enable passing of devicetree */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_MISC_INIT_R +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_LOOPW /* enable loopw command */ +#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR " " +#define CONFIG_AUTOBOOT_PROMPT \ + "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay + +#define CONFIG_SYS_MEMTEST_START 0x00800000 +#define CONFIG_SYS_MEMTEST_END 0x04000000 +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +#define CONFIG_IDENT_STRING "-SPEAr" +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "X600> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LOAD_ADDR 0x00800000 +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_64BIT_VSPRINTF + +/* Use last 2 lwords in internal SRAM for bootcounter */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR 0xd2801ff8 + +#define CONFIG_HOSTNAME x600 +#define CONFIG_UBI_PART ubi0 +#define CONFIG_UBIFS_VOLUME rootfs + +#define xstr(s) str(s) +#define str(s) #s + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:64M(ubi0),64M(ubi1)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "u-boot_addr=1000000\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0" \ + "load=tftp ${u-boot_addr} ${u-boot}\0" \ + "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\ + "erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \ + "cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE) \ + " ${filesize};" \ + "protect on " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize}\0" \ + "upd=run load update\0" \ + "ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0" \ + "part=" xstr(CONFIG_UBI_PART) "\0" \ + "vol=" xstr(CONFIG_UBIFS_VOLUME) "\0" \ + "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \ + "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \ + " ${filesize}\0" \ + "upd_ubifs=run load_ubifs update_ubifs\0" \ + "init_ubifs=nand erase.part ubi0;ubi part ${part};" \ + "ubi create ${vol} 4000000\0" \ + "netdev=eth0\0" \ + "rootpath=/opt/eldk-4.2/arm\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "boot_part=0\0" \ + "altbootcmd=if test $boot_part -eq 0;then " \ + "echo Switching to partition 1!;" \ + "setenv boot_part 1;" \ + "else; " \ + "echo Switching to partition 0!;" \ + "setenv boot_part 0;" \ + "fi;" \ + "saveenv;boot\0" \ + "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \ + "root=ubi0:rootfs rootfstype=ubifs\0" \ + "kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "kernel_fs=/boot/uImage \0" \ + "kernel_addr=1000000\0" \ + "dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" \ + "dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0" \ + "dtb_addr=1800000\0" \ + "load_kernel=tftp ${kernel_addr} ${kernel}\0" \ + "load_dtb=tftp ${dtb_addr} ${dtb}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addcon=setenv bootargs ${bootargs} console=ttyAMA0," \ + "${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "net_nfs=run load_dtb load_kernel; " \ + "run nfsargs addip addcon addmtd addmisc;" \ + "bootm ${kernel_addr} - ${dtb_addr}\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ + " addcon addmisc addmtd;" \ + "bootm ${kernel_addr} - ${dtb_addr}\0" \ + "ubifs_mount=ubi part ubi${boot_part};ubifsmount rootfs\0" \ + "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ + "ubifsload ${dtb_addr} ${dtb_fs};\0" \ + "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ + "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \ + "bootcmd=run nand_ubifs\0" \ + "\0" + +/* Stack sizes */ +#define CONFIG_STACKSIZE (512 * 1024) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x00000000 +#define PHYS_SDRAM_1_MAXSIZE 0x40000000 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* + * SPL related defines + */ +#define CONFIG_SPL +#define CONFIG_SPL_TEXT_BASE 0xd2800b00 +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" + +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ +#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ +#define CONFIG_SPL_NO_PRINTF + +/* + * Please select/define only one of the following + * Each definition corresponds to a supported DDR chip. + * DDR configuration is based on the following selection + */ +#define CONFIG_DDR_MT47H64M16 1 +#define CONFIG_DDR_MT47H32M16 0 +#define CONFIG_DDR_MT47H128M8 0 + +/* + * Synchronous/Asynchronous operation of DDR + * + * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation + * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation + * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation + */ +#define CONFIG_DDR_2HCLK 1 +#define CONFIG_DDR_HCLK 0 +#define CONFIG_DDR_PLL2 0 + +/* + * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported + * or not. Modify/Add to only these macros to define new boot types + */ +#define USB_BOOT_SUPPORTED 0 +#define PCIE_BOOT_SUPPORTED 0 +#define SNOR_BOOT_SUPPORTED 1 +#define NAND_BOOT_SUPPORTED 1 +#define PNOR_BOOT_SUPPORTED 0 +#define TFTP_BOOT_SUPPORTED 0 +#define UART_BOOT_SUPPORTED 0 +#define SPI_BOOT_SUPPORTED 0 +#define I2C_BOOT_SUPPORTED 0 +#define MMC_BOOT_SUPPORTED 0 + +#endif /* __CONFIG_H */ |