diff options
Diffstat (limited to 'include/configs/voiceblue.h')
| -rw-r--r-- | include/configs/voiceblue.h | 74 |
1 files changed, 37 insertions, 37 deletions
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 312f720..f460610 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -54,28 +54,28 @@ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ /* * FLASH organization */ -#define CFG_FLASH_CFI /* Flash is CFI conformant */ +#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */ #define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */ -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* FIXME: Does not work on AMD flash */ -/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */ -#define CFG_MAX_FLASH_SECT 512 /* max # of sectors on one chip */ +/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max # of sectors on one chip */ -#define CFG_MONITOR_BASE PHYS_FLASH_1 -#define CFG_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* * Environment settings */ #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_SECT_SIZE (64 * 1024) #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) @@ -86,10 +86,10 @@ /* * Size of malloc() pool and stack */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) #define CONFIG_STACKSIZE (1 * 1024 * 1024) -#define PHYS_SDRAM_1_RESERVED (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE) +#define PHYS_SDRAM_1_RESERVED (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) /* * Hardware drivers @@ -98,25 +98,25 @@ #define CONFIG_SMC91111_BASE 0x08000300 #define CONFIG_HARD_I2C -#define CFG_I2C_SPEED 100000 -#define CFG_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_DRIVER_OMAP1510_I2C #define CONFIG_RTC_DS1307 -#define CFG_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* * NS16550 Configuration */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* @@ -127,7 +127,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_BOOTD #define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_JFFS2 @@ -152,7 +152,7 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ -#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ #define CONFIG_BOOTCOMMAND "run nboot" #define CONFIG_PREBOOT "run setup" #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -197,27 +197,27 @@ /* * Miscellaneous configurable options */ -#define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "# " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START PHYS_SDRAM_1 -#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. * This time is further subdivided by a local divisor. */ -#define CFG_TIMERBASE OMAP1510_TIMER1_BASE -#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ -#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) +#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE +#define CONFIG_SYS_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT)) #define OMAP5910_DPLL_DIV 1 #define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ |