diff options
Diffstat (limited to 'include/configs/uniphier-common.h')
| -rw-r--r-- | include/configs/uniphier-common.h | 250 |
1 files changed, 0 insertions, 250 deletions
diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h deleted file mode 100644 index 224c335..0000000 --- a/include/configs/uniphier-common.h +++ /dev/null @@ -1,250 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* U-boot - Common settings for UniPhier Family */ - -#ifndef __CONFIG_UNIPHIER_COMMON_H__ -#define __CONFIG_UNIPHIER_COMMON_H__ - -/* - * Support card address map - */ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x03f00000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x08000000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000) -#endif - -#ifdef CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE -#define CONFIG_SYS_NS16550_CLK 12288000 -#define CONFIG_SYS_NS16550_REG_SIZE -2 -#endif - -#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE -#define CONFIG_SMC911X_32_BIT - -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 - -/*----------------------------------------------------------------------- - * MMU and Cache Setting - *----------------------------------------------------------------------*/ - -/* Comment out the following to enable L1 cache */ -/* #define CONFIG_SYS_ICACHE_OFF */ -/* #define CONFIG_SYS_DCACHE_OFF */ - -/* Comment out the following to enable L2 cache */ -#define CONFIG_UNIPHIER_L2CACHE_ON - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - -#define CONFIG_TIMESTAMP - -/* FLASH related */ -#define CONFIG_MTD_DEVICE - -/* - * uncomment the following to disable FLASH related code. - */ -/* #define CONFIG_SYS_NO_FLASH */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_FLASH_BASE 0 - -/* - * flash_toggle does not work for out supoort card. - * We need to use flash_status_poll. - */ -#define CONFIG_SYS_CFI_FLASH_STATUS_POLL - -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000} -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000} -#endif - -/* serial console configuration */ -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_GENERIC_BOARD - -#if !defined(CONFIG_SPL_BUILD) -#define CONFIG_USE_ARCH_MEMSET -#define CONFIG_USE_ARCH_MEMCPY -#endif - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_CONS_INDEX 1 - -/* - * For NAND booting the environment is embedded in the U-Boot image. Please take - * look at the file board/amcc/canyonlands/u-boot-nand.lds for details. - */ -/* #define CONFIG_ENV_IS_IN_NAND */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET 0x0 -/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ - -/* Time clock 1MHz */ -#define CONFIG_SYS_TIMER_RATE 1000000 - -/* - * By default, ARP timeout is 5 sec. - * The first ARP request does not seem to work. - * So we need to retry ARP request anyway. - * We want to shrink the interval until the second ARP request. - */ -#define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 -#define CONFIG_SYS_NAND_ONFI_DETECTION - -#define CONFIG_NAND_DENALI_ECC_SIZE 1024 - -#define CONFIG_SYS_NAND_REGS_BASE 0x68100000 -#define CONFIG_SYS_NAND_DATA_BASE 0x68000000 - -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) - -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 - -/* USB */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE -#define CONFIG_DOS_PARTITION - -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " - -/* - * Network Configuration - */ -#define CONFIG_ETHADDR 00:21:83:24:00:00 -#define CONFIG_SERVERIP 192.168.11.1 -#define CONFIG_IPADDR 192.168.11.10 -#define CONFIG_GATEWAYIP 192.168.11.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_LOADADDR 0x84000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_BOOTFILE "fit.itb" - -#define CONFIG_CMDLINE_EDITING /* add command line history */ - -#define CONFIG_BOOTCOMMAND "run $bootmode" - -#define CONFIG_ROOTPATH "/nfs/root/path" -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs $bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ - "tftpboot; bootm;" - -#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "image_offset=0x00080000\0" \ - "image_size=0x00f00000\0" \ - "verify=n\0" \ - "norboot=run add_default_bootargs;" \ - "bootm $image_offset\0" \ - "nandboot=run add_default_bootargs;" \ - "nand read $loadaddr $image_offset $image_size;" \ - "bootm\0" \ - "add_default_bootargs=setenv bootargs $bootargs" \ - " console=ttyS0,$baudrate\0" \ - -/* Open Firmware flat tree */ -#define CONFIG_OF_LIBFDT - -#define CONFIG_HAVE_ARM_SECURE - -/* Memory Size & Mapping */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE - -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE -/* Thre is no memory hole */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE) -#else -#define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE) -#endif - -#define CONFIG_SYS_TEXT_BASE 0x84000000 - -#define CONFIG_BOARD_POSTCLK_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000) -#define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000) - -#define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000) - -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SUPPORT - -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT - -#define CONFIG_SPL_BOARD_INIT - -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 - -#endif /* __CONFIG_UNIPHIER_COMMON_H__ */ |