diff options
Diffstat (limited to 'include/configs/stamp.h')
| -rw-r--r-- | include/configs/stamp.h | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/include/configs/stamp.h b/include/configs/stamp.h new file mode 100644 index 0000000..1402a41 --- /dev/null +++ b/include/configs/stamp.h @@ -0,0 +1,340 @@ +/* + * U-boot - stamp.h Configuration file for STAMP board + * having BF533 processor + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_STAMP_H__ +#define __CONFIG_STAMP_H__ + +/* + * Board settings + * + */ + +#define __ADSPLPBLACKFIN__ 1 +#define __ADSPBF533__ 1 +#define CONFIG_STAMP 1 +#define CONFIG_RTC_BF533 1 + +/* FLASH/ETHERNET uses the same address range */ +#define SHARED_RESOURCES 1 + +#define CONFIG_VDSP 1 + +/* + * Clock settings + * + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 11059200 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 45 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 6 + +/* + * Network Settings + */ +/* network support */ +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME STAMP +#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs + +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ + +/* + * Command settings + * + */ + +#define CFG_LONGHELP 1 + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot 0x1000000 linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot 0x1000000 linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "" + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + * + */ + +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Network settings + * + */ + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20300300 +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define HARDCODE_MAC 1 */ + +/* + * Flash settings + * + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET + +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ +#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + +/* + * following timeouts shall be used once the + * Flash real protection is enabled + */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ + +/* + * I2C settings + * By default PF2 is used as SDA and PF3 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF3 +#define PF_SDA PF2 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +/* + * Compact Flash settings + */ + +/* Enabled below option for CF support */ +/* #define CONFIG_STAMP_CF 1 */ + +#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) + +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_DOS_PARTITION 1 + +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0x20200000 +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ + +#define CFG_ATA_STRIDE 2 +#endif + +/* + * SDRAM settings + * + */ + +#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE 0x08000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + + + + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + + + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* 1ms time tick */ + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_LARGE_IMAGE_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ +/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ + B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) +#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ + B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0xBBC3BBC3 +#define AMBCTL1VAL 0x99B39983 +#define CF_AMBCTL1VAL 0x99B3ffc2 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + + +#endif |