diff options
Diffstat (limited to 'include/configs/spear-common.h')
| -rw-r--r-- | include/configs/spear-common.h | 94 |
1 files changed, 64 insertions, 30 deletions
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index ab1b332..a6d1cfb 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -27,18 +27,33 @@ * Common configurations used for both spear3xx as well as spear6xx */ +/* U-boot Load Address */ +#define CONFIG_SYS_TEXT_BASE 0x00700000 + +/* Ethernet driver configuration */ +#define CONFIG_MII +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_SEARCH_PHY +#define CONFIG_DW0_PHY 1 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + /* USBD driver configuration */ +#if defined(CONFIG_SPEAR_USBTTY) #define CONFIG_DW_UDC #define CONFIG_USB_DEVICE +#define CONFIG_USBD_HS #define CONFIG_USB_TTY #define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC" #define CONFIG_USBD_MANUFACTURER "ST Microelectronics" -#if defined(CONFIG_USB_TTY) -#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0" #endif +#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0" + /* I2C driver configuration */ #define CONFIG_HARD_I2C #define CONFIG_DW_I2C @@ -48,27 +63,25 @@ #define CONFIG_I2C_CHIPADDRESS 0x50 /* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ (1000) -#define CONFIG_SYS_HZ_CLOCK (8300000) +#define CONFIG_SYS_HZ 1000 /* Flash configuration */ #if defined(CONFIG_FLASH_PNOR) -#define CONFIG_SPEAR_EMI 1 +#define CONFIG_SPEAR_EMI #else -#define CONFIG_SPEARSMI 1 +#define CONFIG_ST_SMI #endif -#if defined(CONFIG_SPEARSMI) +#if defined(CONFIG_ST_SMI) #define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BASE (0xF8000000) -#define CONFIG_SYS_CS1_FLASH_BASE (0xF9000000) -#define CONFIG_SYS_FLASH_BANK_SIZE (0x01000000) +#define CONFIG_SYS_FLASH_BASE 0xF8000000 +#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000 +#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000 #define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \ CONFIG_SYS_CS1_FLASH_BASE} #define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ) #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ) @@ -88,11 +101,13 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* NAND FLASH Configuration */ +#define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS -#define CONFIG_NAND_SPEAR 1 +#define CONFIG_NAND_FSMC #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_QUIET_TEST /* * Command support defines @@ -103,11 +118,13 @@ #define CONFIG_CMD_MEMORY #define CONFIG_CMD_RUN #define CONFIG_CMD_SAVES +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <config_cmd_default.h> -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS /* * Default Environment Varible definitions @@ -124,13 +141,13 @@ * U-Boot Environment placing definitions. */ #if defined(CONFIG_ENV_IS_IN_FLASH) -#ifdef CONFIG_SPEARSMI +#ifdef CONFIG_ST_SMI /* * Environment is in serial NOR flash */ #define CONFIG_SYS_MONITOR_LEN 0x00040000 #define CONFIG_ENV_SECT_SIZE 0x00010000 -#define CONFIG_FSMTDBLK "/dev/mtdblock8 " +#define CONFIG_FSMTDBLK "/dev/mtdblock3 " #define CONFIG_BOOTCOMMAND "bootm 0xf8050000" @@ -146,8 +163,7 @@ "0x4C0000; bootm 0x1600000" #endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ CONFIG_SYS_MONITOR_LEN) #elif defined(CONFIG_ENV_IS_IN_NAND) /* @@ -156,28 +172,46 @@ #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_RANGE 0x10000 -#define CONFIG_FSMTDBLK "/dev/mtdblock12 " +#define CONFIG_FSMTDBLK "/dev/mtdblock7 " #define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \ "0x80000 0x4C0000; " \ "bootm 0x1600000" #endif -#define CONFIG_BOOTARGS_NFS "root=/dev/nfs ip=dhcp " \ - "console=ttyS0 init=/bin/sh" -#define CONFIG_BOOTARGS "console=ttyS0 mem=128M " \ +#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \ + "mem=128M " \ "root="CONFIG_FSMTDBLK \ "rootfstype=jffs2" +#define CONFIG_NFSBOOTCOMMAND \ + "bootp; " \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off " \ + "console=ttyAMA0,115200 $(othbootargs);" \ + "bootm; " + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=ttyAMA0,115200 $(othbootargs);" \ + CONFIG_BOOTCOMMAND + + #define CONFIG_ENV_SIZE 0x02000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Miscellaneous configurable options */ +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO #define CONFIG_BOOT_PARAMS_ADDR 0x00000100 -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_MISC_INIT_R 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK 1 -#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_MISC_INIT_R +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_AUTOBOOT_KEYED #define CONFIG_AUTOBOOT_STOP_STR " " #define CONFIG_AUTOBOOT_PROMPT \ "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay @@ -195,9 +229,9 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LOAD_ADDR 0x00800000 -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 +#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY +#define CONFIG_SYS_FLASH_EMPTY_INFO /* Stack sizes */ #define CONFIG_STACKSIZE (128*1024) |