summaryrefslogtreecommitdiff
path: root/include/configs/socfpga_common.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/socfpga_common.h')
-rw-r--r--include/configs/socfpga_common.h46
1 files changed, 46 insertions, 0 deletions
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index e1aae49..c436fda 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -79,6 +79,25 @@
#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
/*
+ * EPCS/EPCQx1 Serial Flash Controller
+ */
+#ifdef CONFIG_ALTERA_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
+/*
+ * The base address is configurable in QSys, each board must specify the
+ * base address based on it's particular FPGA configuration. Please note
+ * that the address here is incremented by 0x400 from the Base address
+ * selected in QSys, since the SPI registers are at offset +0x400.
+ * #define CONFIG_SYS_SPI_BASE 0xff240400
+ */
+#endif
+
+/*
* Ethernet on SoC (EMAC)
*/
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
@@ -141,6 +160,33 @@
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
#endif
+ /*
+ * I2C support
+ */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
+#define CONFIG_SYS_I2C_BUS_MAX 4
+#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS
+#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS
+#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS
+#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS
+/* Using standard mode which the speed up to 100Kb/s */
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SPEED1 100000
+#define CONFIG_SYS_I2C_SPEED2 100000
+#define CONFIG_SYS_I2C_SPEED3 100000
+/* Address of device when used as slave */
+#define CONFIG_SYS_I2C_SLAVE 0x02
+#define CONFIG_SYS_I2C_SLAVE1 0x02
+#define CONFIG_SYS_I2C_SLAVE2 0x02
+#define CONFIG_SYS_I2C_SLAVE3 0x02
+#ifndef __ASSEMBLY__
+/* Clock supplied to I2C controller in unit of MHz */
+unsigned int cm_get_l4_sp_clk_hz(void);
+#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000)
+#endif
+#define CONFIG_CMD_I2C
+
/*
* Serial Driver
*/