diff options
Diffstat (limited to 'include/configs/smdk6400.h')
| -rw-r--r-- | include/configs/smdk6400.h | 296 |
1 files changed, 0 insertions, 296 deletions
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h deleted file mode 100644 index d4dc8ef..0000000 --- a/include/configs/smdk6400.h +++ /dev/null @@ -1,296 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * Gary Jennejohn <garyj@denx.de> - * David Mueller <d.mueller@elsoft.ch> - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - * - * Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */ -#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ -#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ - -#define CONFIG_PERIPORT_REMAP -#define CONFIG_PERIPORT_BASE 0x70000000 -#define CONFIG_PERIPORT_SIZE 0x13 - -#define CONFIG_SYS_IRAM_BASE 0x0c000000 /* Internal SRAM base address */ -#define CONFIG_SYS_IRAM_SIZE 0x2000 /* 8 KB of internal SRAM memory */ -#define CONFIG_SYS_IRAM_END (CONFIG_SYS_IRAM_BASE + CONFIG_SYS_IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IRAM_END - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_SDRAM_BASE 0x50000000 - -/* input clock of PLL: SMDK6400 has 12MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 12000000 - -#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000) -#define CONFIG_ENABLE_MMU -#endif - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG - -/* - * Architecture magic and machine type - */ -#define CONFIG_MACH_TYPE 1270 - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x18800300 -#define CONFIG_CS8900_BUS16 /* follow the Linux driver */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */ - -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - -#define CONFIG_CMDLINE_EDITING - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NAND -#if defined(CONFIG_BOOT_ONENAND) -#define CONFIG_CMD_ONENAND -#endif -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_ZERO_BOOTDELAY_CHECK - -#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/********************************** - Support Clock Settings - ********************************** - Setting SYNC ASYNC - ---------------------------------- - 667_133_66 X O - 533_133_66 O O - 400_133_66 X O - 400_100_50 O O - **********************************/ - -/*#define CONFIG_CLK_667_133_66*/ -#define CONFIG_CLK_533_133_66 -/* -#define CONFIG_CLK_400_100_50 -#define CONFIG_CLK_400_133_66 -#define CONFIG_SYNC_MODE -*/ - -/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -/* AM29LV160B has 35 sectors, AM29LV800B - 19 */ -#define CONFIG_SYS_MAX_FLASH_SECT 40 - -#define CONFIG_AMD_LV800 -#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */ -/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx16 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* - * SMDK6400 board specific data - */ - -#define CONFIG_IDENT_STRING " for SMDK6400" - -/* base address for uboot */ -#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x07e00000) -/* total memory available to uboot */ -#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024) - -/* Put environment copies after the end of U-Boot owned RAM */ -#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) - -#ifdef CONFIG_ENABLE_MMU -#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 -#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \ - "bootm 0xc0018000" -#else -#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE -#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \ - "bootm 0x50018000" -#endif - -/* NAND U-Boot load and start address */ -#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000) - -#define CONFIG_ENV_OFFSET 0x0040000 - -/* NAND configuration */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x70200010 -#define CONFIG_SYS_S3C_NAND_HWECC - -#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ -#define CONFIG_SYS_NAND_WP 1 -#define CONFIG_SYS_NAND_YAFFS_WRITE 1 /* support yaffs write */ -#define CONFIG_SYS_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */ - -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE /* NUB load-addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* NUB start-addr */ - -#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */ - -/* NAND chip page size */ -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -/* NAND chip block size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -/* NAND chip page per block count */ -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -/* Location of the bad-block label */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -/* Extra address cycle for > 128MiB */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE - -/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */ -#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE -/* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */ -#define CONFIG_SYS_NAND_ECCBYTES 4 -/* Size of a single OOB region */ -#define CONFIG_SYS_NAND_OOBSIZE 64 -/* ECC byte positions */ -#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ - 48, 49, 50, 51, 52, 53, 54, 55, \ - 56, 57, 58, 59, 60, 61, 62, 63} - -/* Boot configuration (define only one of next 3) */ -#define CONFIG_BOOT_NAND -/* None of these are currently implemented. Left from the original Samsung - * version for reference -#define CONFIG_BOOT_NOR -#define CONFIG_BOOT_MOVINAND -#define CONFIG_BOOT_ONENAND -*/ - -#define CONFIG_NAND -#define CONFIG_NAND_S3C64XX -/* Unimplemented or unsupported. See comment above. -#define CONFIG_ONENAND -#define CONFIG_MOVINAND -*/ - -/* Settings as above boot configuration */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_BOOTARGS "console=ttySAC,115200" - -#if !defined(CONFIG_ENABLE_MMU) -#define CONFIG_CMD_USB 1 -#define CONFIG_USB_S3C64XX -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x74300000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c6400" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 - -#define CONFIG_USB_STORAGE 1 -#endif -#define CONFIG_DOS_PARTITION 1 - -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU) -# error "usb_ohci.c is currently broken with MMU enabled." -#endif - -#endif /* __CONFIG_H */ |